ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value

The following commits used IRQ_TYPE_NONE since that matched what was
already in the file and I do not have access to the datasheets for
these devices. After these patches were submitted, commit dcf145011400
("ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value")
changed all of these values to IRQ_TYPE_LEVEL_HIGH. This patch corrects
the IRQ type for these two commits:

commit bd9392507588 ("ARM: dts: qcom: msm8974-hammerhead: add device
tree bindings for ALS / proximity")

commit fe8d81fe7d9a ("ARM: dts: qcom: msm8974-hammerhead: add device
tree bindings for mpu6515")

Prior to these patches, I was having issues with the bmp280 sensor
returning temperature / pressure skipped errors, however these errors
have gone away with these patches.

Patches were tested on a LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 84e1fee1bf1a8a9f2a13ef35e7885e8a421b0337..a808973f9dc73c79fdf781faae5e47d625c3252b 100644 (file)
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -719,7 +719,7 @@
                        status = "disabled";
                        compatible = "qcom,i2c-qup-v2.1.1";
                        reg = <0xf9925000 0x1000>;
-                       interrupts = <0 97 IRQ_TYPE_NONE>;
+                       interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
                        clock-names = "core", "iface";
                        #address-cells = <1>;
@@ -754,7 +754,7 @@
                        status = "disabled";
                        compatible = "qcom,i2c-qup-v2.1.1";
                        reg = <0xf9968000 0x1000>;
-                       interrupts = <0 106 IRQ_TYPE_NONE>;
+                       interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
                        clock-names = "core", "iface";
                        #address-cells = <1>;