clk: sunxi-ng: Add phase clock support

Add support for the clocks in the CCU that introduce a phase shift from
their parent clock.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20160629190535.11855-7-maxime.ripard@free-electrons.com

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 4699a60..3a3bc43 100644 (file)
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -15,4 +15,7 @@ config SUNXI_CCU_GATE
 config SUNXI_CCU_MUX
        bool
 
+config SUNXI_CCU_PHASE
+       bool
+
 endif

diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index eaa8337..a0c53c5 100644 (file)
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_SUNXI_CCU)         += ccu_reset.o
 obj-$(CONFIG_SUNXI_CCU_FRAC)   += ccu_frac.o
 obj-$(CONFIG_SUNXI_CCU_GATE)   += ccu_gate.o
 obj-$(CONFIG_SUNXI_CCU_MUX)    += ccu_mux.o
+obj-$(CONFIG_SUNXI_CCU_PHASE)  += ccu_phase.o

diff --git a/drivers/clk/sunxi-ng/ccu_phase.c b/drivers/clk/sunxi-ng/ccu_phase.c
new file mode 100644 (file)
index 0000000..400c58a
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu_phase.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+
+#include "ccu_phase.h"
+
+static int ccu_phase_get_phase(struct clk_hw *hw)
+{
+       struct ccu_phase *phase = hw_to_ccu_phase(hw);
+       struct clk_hw *parent, *grandparent;
+       unsigned int parent_rate, grandparent_rate;
+       u16 step, parent_div;
+       u32 reg;
+       u8 delay;
+
+       reg = readl(phase->common.base + phase->common.reg);
+       delay = (reg >> phase->shift);
+       delay &= (1 << phase->width) - 1;
+
+       if (!delay)
+               return 180;
+
+       /* Get our parent clock, it's the one that can adjust its rate */
+       parent = clk_hw_get_parent(hw);
+       if (!parent)
+               return -EINVAL;
+
+       /* And its rate */
+       parent_rate = clk_hw_get_rate(parent);
+       if (!parent_rate)
+               return -EINVAL;
+
+       /* Now, get our parent's parent (most likely some PLL) */
+       grandparent = clk_hw_get_parent(parent);
+       if (!grandparent)
+               return -EINVAL;
+
+       /* And its rate */
+       grandparent_rate = clk_hw_get_rate(grandparent);
+       if (!grandparent_rate)
+               return -EINVAL;
+
+       /* Get our parent clock divider */
+       parent_div = grandparent_rate / parent_rate;
+
+       step = DIV_ROUND_CLOSEST(360, parent_div);
+       return delay * step;
+}
+
+static int ccu_phase_set_phase(struct clk_hw *hw, int degrees)
+{
+       struct ccu_phase *phase = hw_to_ccu_phase(hw);
+       struct clk_hw *parent, *grandparent;
+       unsigned int parent_rate, grandparent_rate;
+       unsigned long flags;
+       u32 reg;
+       u8 delay;
+
+       /* Get our parent clock, it's the one that can adjust its rate */
+       parent = clk_hw_get_parent(hw);
+       if (!parent)
+               return -EINVAL;
+
+       /* And its rate */
+       parent_rate = clk_hw_get_rate(parent);
+       if (!parent_rate)
+               return -EINVAL;
+
+       /* Now, get our parent's parent (most likely some PLL) */
+       grandparent = clk_hw_get_parent(parent);
+       if (!grandparent)
+               return -EINVAL;
+
+       /* And its rate */
+       grandparent_rate = clk_hw_get_rate(grandparent);
+       if (!grandparent_rate)
+               return -EINVAL;
+
+       if (degrees != 180) {
+               u16 step, parent_div;
+
+               /* Get our parent divider */
+               parent_div = grandparent_rate / parent_rate;
+
+               /*
+                * We can only outphase the clocks by multiple of the
+                * PLL's period.
+                *
+                * Since our parent clock is only a divider, and the
+                * formula to get the outphasing in degrees is deg =
+                * 360 * delta / period
+                *
+                * If we simplify this formula, we can see that the
+                * only thing that we're concerned about is the number
+                * of period we want to outphase our clock from, and
+                * the divider set by our parent clock.
+                */
+               step = DIV_ROUND_CLOSEST(360, parent_div);
+               delay = DIV_ROUND_CLOSEST(degrees, step);
+       } else {
+               delay = 0;
+       }
+
+       spin_lock_irqsave(phase->common.lock, flags);
+       reg = readl(phase->common.base + phase->common.reg);
+       reg &= ~GENMASK(phase->width + phase->shift - 1, phase->shift);
+       writel(reg | (delay << phase->shift),
+              phase->common.base + phase->common.reg);
+       spin_unlock_irqrestore(phase->common.lock, flags);
+
+       return 0;
+}
+
+const struct clk_ops ccu_phase_ops = {
+       .get_phase      = ccu_phase_get_phase,
+       .set_phase      = ccu_phase_set_phase,
+};

diff --git a/drivers/clk/sunxi-ng/ccu_phase.h b/drivers/clk/sunxi-ng/ccu_phase.h
new file mode 100644 (file)
index 0000000..75a091a
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu_phase.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_PHASE_H_
+#define _CCU_PHASE_H_
+
+#include <linux/clk-provider.h>
+
+#include "ccu_common.h"
+
+struct ccu_phase {
+       u8                      shift;
+       u8                      width;
+
+       struct ccu_common       common;
+};
+
+#define SUNXI_CCU_PHASE(_struct, _name, _parent, _reg, _shift, _width, _flags) \
+       struct ccu_phase _struct = {                                    \
+               .shift  = _shift,                                       \
+               .width  = _width,                                       \
+               .common = {                                             \
+                       .reg            = _reg,                         \
+                       .hw.init        = CLK_HW_INIT(_name,            \
+                                                     _parent,          \
+                                                     &ccu_phase_ops,   \
+                                                     _flags),          \
+               }                                                       \
+       }
+
+static inline struct ccu_phase *hw_to_ccu_phase(struct clk_hw *hw)
+{
+       struct ccu_common *common = hw_to_ccu_common(hw);
+
+       return container_of(common, struct ccu_phase, common);
+}
+
+extern const struct clk_ops ccu_phase_ops;
+
+#endif /* _CCU_PHASE_H_ */