ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960

IRQ types blindly copied from very similar APQ8064.

Fixes warnings as:
WARNING: CPU: 0 PID: 1 at drivers/irqchip/irq-gic.c:1080 gic_irq_domain_translate+0x118/0x120
...

Tested-by: LogicalErzor <logicalerzor@gmail.com> # boot-tested on Samsung S3
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220108174229.60384-1-david@ixit.cz

diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 2a0ec97..a0f9ab7 100644 (file)
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -146,7 +146,9 @@
                        reg             = <0x108000 0x1000>;
                        qcom,ipc        = <&l2cc 0x8 2>;
 
-                       interrupts      = <0 19 0>, <0 21 0>, <0 22 0>;
+                       interrupts      = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+                                         <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+                                         <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
                        interrupt-names = "ack", "err", "wakeup";
 
                        regulators {
@@ -192,7 +194,7 @@
                                compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
                                reg = <0x16440000 0x1000>,
                                      <0x16400000 0x1000>;
-                               interrupts = <0 154 0x0>;
+                               interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
                                clock-names = "core", "iface";
                                status = "disabled";
@@ -318,7 +320,7 @@
                                #address-cells = <1>;
                                #size-cells = <0>;
                                reg = <0x16080000 0x1000>;
-                               interrupts = <0 147 0>;
+                               interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
                                spi-max-frequency = <24000000>;
                                cs-gpios = <&msmgpio 8 0>;