#include "reg.h"
-static struct wlcore_ops wl12xx_ops = {
-};
-
static struct wlcore_partition_set wl12xx_ptable[PART_TABLE_LEN] = {
[PART_DOWN] = {
.mem = {
[REG_RAW_FW_STATUS_ADDR] = FW_STATUS_ADDR,
};
+/* TODO: maybe move to a new header file? */
+#define WL127X_FW_NAME_MULTI "ti-connectivity/wl127x-fw-4-mr.bin"
+#define WL127X_FW_NAME_SINGLE "ti-connectivity/wl127x-fw-4-sr.bin"
+#define WL127X_PLT_FW_NAME "ti-connectivity/wl127x-fw-4-plt.bin"
+
+#define WL128X_FW_NAME_MULTI "ti-connectivity/wl128x-fw-4-mr.bin"
+#define WL128X_FW_NAME_SINGLE "ti-connectivity/wl128x-fw-4-sr.bin"
+#define WL128X_PLT_FW_NAME "ti-connectivity/wl128x-fw-4-plt.bin"
+
+static int wl12xx_identify_chip(struct wl1271 *wl)
+{
+ int ret = 0;
+
+ switch (wl->chip.id) {
+ case CHIP_ID_1271_PG10:
+ wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete",
+ wl->chip.id);
+
+ wl->quirks |= WLCORE_QUIRK_NO_BLOCKSIZE_ALIGNMENT;
+ wl->plt_fw_name = WL127X_PLT_FW_NAME;
+ wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
+ wl->mr_fw_name = WL127X_FW_NAME_MULTI;
+ break;
+
+ case CHIP_ID_1271_PG20:
+ wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
+ wl->chip.id);
+
+ wl->quirks |= WLCORE_QUIRK_NO_BLOCKSIZE_ALIGNMENT;
+ wl->plt_fw_name = WL127X_PLT_FW_NAME;
+ wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
+ wl->mr_fw_name = WL127X_FW_NAME_MULTI;
+ break;
+
+ case CHIP_ID_1283_PG20:
+ wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1283 PG20)",
+ wl->chip.id);
+ wl->plt_fw_name = WL128X_PLT_FW_NAME;
+ wl->sr_fw_name = WL128X_FW_NAME_SINGLE;
+ wl->mr_fw_name = WL128X_FW_NAME_MULTI;
+ break;
+ case CHIP_ID_1283_PG10:
+ default:
+ wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
+ ret = -ENODEV;
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static struct wlcore_ops wl12xx_ops = {
+ .identify_chip = wl12xx_identify_chip,
+};
+
static int __devinit wl12xx_probe(struct platform_device *pdev)
{
struct wl1271 *wl;
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
+MODULE_FIRMWARE(WL127X_FW_NAME_SINGLE);
+MODULE_FIRMWARE(WL127X_FW_NAME_MULTI);
+MODULE_FIRMWARE(WL127X_PLT_FW_NAME);
+MODULE_FIRMWARE(WL128X_FW_NAME_SINGLE);
+MODULE_FIRMWARE(WL128X_FW_NAME_MULTI);
+MODULE_FIRMWARE(WL128X_PLT_FW_NAME);
#define CLK_REQ_OUTN_SEL 0x700
#define WU_COUNTER_PAUSE_VAL 0x3FF
-#define WELP_ARM_COMMAND_VAL 0x4
/* PLL configuration algorithm for wl128x */
#define SYS_CLK_CFG_REG 0x2200
/* Only new station firmwares support routing fw logs to the host */
if ((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_STA) &&
(fw_ver[FW_VER_MINOR] < FW_VER_MINOR_FWLOG_STA_MIN))
- quirks |= WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED;
+ quirks |= WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED;
/* This feature is not yet supported for AP mode */
if (fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_AP)
- quirks |= WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED;
+ quirks |= WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED;
return quirks;
}
u32 clk;
if (WL127X_PG_GET_MAJOR(wl->hw_pg_ver) < 3)
- wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION;
+ wl->quirks |= WLCORE_QUIRK_END_OF_TRANSACTION;
if (wl->ref_clock == CONF_REF_CLK_19_2_E ||
wl->ref_clock == CONF_REF_CLK_38_4_E ||
{
int ret;
- if (wl->quirks & WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED)
+ if (wl->quirks & WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED)
return 0;
ret = wl12xx_cmd_config_fwlog(wl);
if (wl->chip.id == CHIP_ID_1283_PG20) {
u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE;
- if (!(wl->quirks & WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT))
+ if (!(wl->quirks & WLCORE_QUIRK_NO_BLOCKSIZE_ALIGNMENT))
/* Enable SDIO padding */
host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK;
if (plt) {
fw_type = WL12XX_FW_TYPE_PLT;
- if (wl->chip.id == CHIP_ID_1283_PG20)
- fw_name = WL128X_PLT_FW_NAME;
- else
- fw_name = WL127X_PLT_FW_NAME;
+ fw_name = wl->plt_fw_name;
} else {
/*
* we can't call wl12xx_get_vif_count() here because
*/
if (wl->last_vif_count > 1) {
fw_type = WL12XX_FW_TYPE_MULTI;
- if (wl->chip.id == CHIP_ID_1283_PG20)
- fw_name = WL128X_FW_NAME_MULTI;
- else
- fw_name = WL127X_FW_NAME_MULTI;
+ fw_name = wl->mr_fw_name;
} else {
fw_type = WL12XX_FW_TYPE_NORMAL;
- if (wl->chip.id == CHIP_ID_1283_PG20)
- fw_name = WL128X_FW_NAME_SINGLE;
- else
- fw_name = WL127X_FW_NAME_SINGLE;
+ fw_name = wl->sr_fw_name;
}
}
u32 first_addr;
u8 *block;
- if ((wl->quirks & WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED) ||
+ if ((wl->quirks & WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED) ||
(wl->conf.fwlog.mode != WL12XX_FWLOG_ON_DEMAND) ||
(wl->conf.fwlog.mem_blocks == 0))
return;
* chip types.
*/
if (!wl1271_set_block_size(wl))
- wl->quirks |= WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT;
-
- switch (wl->chip.id) {
- case CHIP_ID_1271_PG10:
- wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete",
- wl->chip.id);
+ wl->quirks |= WLCORE_QUIRK_NO_BLOCKSIZE_ALIGNMENT;
- ret = wl1271_setup(wl);
- if (ret < 0)
- goto out;
- wl->quirks |= WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT;
- break;
-
- case CHIP_ID_1271_PG20:
- wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
- wl->chip.id);
-
- ret = wl1271_setup(wl);
- if (ret < 0)
- goto out;
- wl->quirks |= WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT;
- break;
+ ret = wl->ops->identify_chip(wl);
+ if (ret < 0)
+ goto out;
- case CHIP_ID_1283_PG20:
- wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1283 PG20)",
- wl->chip.id);
+ /* TODO: make sure the lower driver has set things up correctly */
- ret = wl1271_setup(wl);
- if (ret < 0)
- goto out;
- break;
- case CHIP_ID_1283_PG10:
- default:
- wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
- ret = -ENODEV;
+ ret = wl1271_setup(wl);
+ if (ret < 0)
goto out;
- }
ret = wl12xx_fetch_firmware(wl, plt);
if (ret < 0)
* Write the driver's packet counter to the FW. This is only required
* for older hardware revisions
*/
- if (wl->quirks & WL12XX_QUIRK_END_OF_TRANSACTION)
+ if (wl->quirks & WLCORE_QUIRK_END_OF_TRANSACTION)
wl1271_write32(wl, WL12XX_REG_RX_DRIVER_COUNTER,
wl->rx_counter);
static unsigned int wl12xx_calc_packet_alignment(struct wl1271 *wl,
unsigned int packet_length)
{
- if (wl->quirks & WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT)
+ if (wl->quirks & WLCORE_QUIRK_NO_BLOCKSIZE_ALIGNMENT)
return ALIGN(packet_length, WL1271_TX_ALIGN_TO);
else
return ALIGN(packet_length, WL12XX_BUS_BLOCK_SIZE);
* Interrupt the firmware with the new packets. This is only
* required for older hardware revisions
*/
- if (wl->quirks & WL12XX_QUIRK_END_OF_TRANSACTION)
+ if (wl->quirks & WLCORE_QUIRK_END_OF_TRANSACTION)
wl1271_write32(wl, WL12XX_HOST_WR_ACCESS,
wl->tx_packets_count);
#define HW_BG_RATES_MASK 0xffff
#define HW_HT_RATES_OFFSET 16
-/* Quirks */
-
-/* Each RX/TX transaction requires an end-of-transaction transfer */
-#define WL12XX_QUIRK_END_OF_TRANSACTION BIT(0)
-
-/* wl127x and SPI don't support SDIO block size alignment */
-#define WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT BIT(2)
-
-/* Older firmwares did not implement the FW logger over bus feature */
-#define WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED BIT(4)
-
#define WL12XX_HW_BLOCK_SIZE 256
#endif
#include "event.h"
struct wlcore_ops {
+ int (*identify_chip)(struct wl1271 *wl);
};
enum wlcore_partitions {
const struct wlcore_partition_set *ptable;
/* pointer to the lower driver register table */
const int *rtable;
+ /* name of the firmwares to load - for PLT, single role, multi-role */
+ const char *plt_fw_name;
+ const char *sr_fw_name;
+ const char *mr_fw_name;
};
int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev);
/* Firmware image load chunk size */
#define CHUNK_SIZE 16384
+/* Quirks */
+
+/* Each RX/TX transaction requires an end-of-transaction transfer */
+#define WLCORE_QUIRK_END_OF_TRANSACTION BIT(0)
+
+/* wl127x and SPI don't support SDIO block size alignment */
+#define WLCORE_QUIRK_NO_BLOCKSIZE_ALIGNMENT BIT(2)
+
+/* Older firmwares did not implement the FW logger over bus feature */
+#define WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED BIT(4)
+
/* TODO: move to the lower drivers when all usages are abstracted */
#define CHIP_ID_1271_PG10 (0x4030101)
#define CHIP_ID_1271_PG20 (0x4030111)
#define ECPU_CONTROL_HALT 0x00000101
+#define WELP_ARM_COMMAND_VAL 0x4
+
#endif /* __WLCORE_H__ */
projects / profile / ivi / kernel-adaptation-intel-automotive.git / commitdiff