ARM: iop32x: use GENERIC_IRQ_MULTI_HANDLER

iop32x uses the entry-macro.S file for both the IRQ entry and for
hooking into the arch_ret_to_user code path. This is done because the
cp6 registers have to be enabled before accessing any of the interrupt
controller registers but have to be disabled when running in user space.

There is also a lazy-enable logic in cp6.c, but during a hardirq, we
know it has to be enabled.

Both the cp6-enable code and the code to read the IRQ status can be
lifted into the normal generic_handle_arch_irq() path, but the
cp6-disable code has to remain in the user return code. As nothing
other than iop32x uses this hook, just open-code it there with an
ifdef for the platform that can eventually be removed when iop32x
has reached the end of its life.

The cp6-enable path in the IRQ entry has an extra cp_wait barrier that
the trap version does not have, but it is harmless to do it in both
cases to simplify the logic here at the cost of a few extra cycles
for the trap.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a0cc9ca..d9ba696 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -227,9 +227,6 @@ config GENERIC_ISA_DMA
 config FIQ
        bool
 
-config NEED_RET_TO_USER
-       bool
-
 config ARCH_MTD_XIP
        bool
 
@@ -371,9 +368,9 @@ config ARCH_IOP32X
        bool "IOP32x-based"
        depends on MMU
        select CPU_XSCALE
+       select GENERIC_IRQ_MULTI_HANDLER
        select GPIO_IOP
        select GPIOLIB
-       select NEED_RET_TO_USER
        select FORCE_PCI
        select PLAT_IOP
        help

diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index ac86c34..c928d6b 100644 (file)
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -16,12 +16,14 @@
 
        .equ    NR_syscalls, __NR_syscalls
 
-#ifdef CONFIG_NEED_RET_TO_USER
-#include <mach/entry-macro.S>
-#else
-       .macro  arch_ret_to_user, tmp1, tmp2
-       .endm
+       .macro  arch_ret_to_user, tmp
+#ifdef CONFIG_ARCH_IOP32X
+       mrc     p15, 0, \tmp, c15, c1, 0
+       tst     \tmp, #(1 << 6)
+       bicne   \tmp, \tmp, #(1 << 6)
+       mcrne   p15, 0, \tmp, c15, c1, 0        @ Disable cp6 access
 #endif
+       .endm
 
 #include "entry-header.S"
 
@@ -55,7 +57,7 @@ __ret_fast_syscall:
 
 
        /* perform architecture specific actions before user return */
-       arch_ret_to_user r1, lr
+       arch_ret_to_user r1
 
        restore_user_regs fast = 1, offset = S_OFF
  UNWIND(.fnend         )
@@ -128,7 +130,7 @@ no_work_pending:
        asm_trace_hardirqs_on save = 0
 
        /* perform architecture specific actions before user return */
-       arch_ret_to_user r1, lr
+       arch_ret_to_user r1
        ct_user_enter save = 0
 
        restore_user_regs fast = 0, offset = 0

diff --git a/arch/arm/mach-iop32x/cp6.c b/arch/arm/mach-iop32x/cp6.c
index ec74b07..2882674 100644 (file)
--- a/arch/arm/mach-iop32x/cp6.c
+++ b/arch/arm/mach-iop32x/cp6.c
@@ -7,7 +7,7 @@
 #include <asm/traps.h>
 #include <asm/ptrace.h>
 
-static int cp6_trap(struct pt_regs *regs, unsigned int instr)
+void iop_enable_cp6(void)
 {
        u32 temp;
 
@@ -16,7 +16,15 @@ static int cp6_trap(struct pt_regs *regs, unsigned int instr)
                "mrc    p15, 0, %0, c15, c1, 0\n\t"
                "orr    %0, %0, #(1 << 6)\n\t"
                "mcr    p15, 0, %0, c15, c1, 0\n\t"
+               "mrc    p15, 0, %0, c15, c1, 0\n\t"
+               "mov    %0, %0\n\t"
+               "sub    pc, pc, #4  @ cp_wait\n\t"
                : "=r"(temp));
+}
+
+static int cp6_trap(struct pt_regs *regs, unsigned int instr)
+{
+       iop_enable_cp6();
 
        return 0;
 }

diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S
deleted file mode 100644 (file)
index 341e5d9..0000000
--- a/arch/arm/mach-iop32x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP32x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-       .macro get_irqnr_preamble, base, tmp
-       mrc     p15, 0, \tmp, c15, c1, 0
-       orr     \tmp, \tmp, #(1 << 6)
-       mcr     p15, 0, \tmp, c15, c1, 0        @ Enable cp6 access
-       mrc     p15, 0, \tmp, c15, c1, 0
-       mov     \tmp, \tmp
-       sub     pc, pc, #4                      @ cp_wait
-       .endm
-
-       .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-       mrc     p6, 0, \irqstat, c8, c0, 0      @ Read IINTSRC
-       cmp     \irqstat, #0
-       clzne   \irqnr, \irqstat
-       rsbne   \irqnr, \irqnr, #32
-       .endm
-
-       .macro arch_ret_to_user, tmp1, tmp2
-       mrc     p15, 0, \tmp1, c15, c1, 0
-       ands    \tmp2, \tmp1, #(1 << 6)
-       bicne   \tmp1, \tmp1, #(1 << 6)
-       mcrne   p15, 0, \tmp1, c15, c1, 0       @ Disable cp6 access
-       .endm

diff --git a/arch/arm/mach-iop32x/iop3xx.h b/arch/arm/mach-iop32x/iop3xx.h
index 46b4b34..a6ec7eb 100644 (file)
--- a/arch/arm/mach-iop32x/iop3xx.h
+++ b/arch/arm/mach-iop32x/iop3xx.h
@@ -225,6 +225,7 @@ extern int iop3xx_get_init_atu(void);
 #include <linux/reboot.h>
 
 void iop3xx_map_io(void);
+void iop_enable_cp6(void);
 void iop_init_cp6_handler(void);
 void iop_init_time(unsigned long tickrate);
 void iop3xx_restart(enum reboot_mode, const char *);

diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index d1e8824..b820839 100644 (file)
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -29,6 +29,15 @@ static void intstr_write(u32 val)
        asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
 }
 
+static u32 iintsrc_read(void)
+{
+       int irq;
+
+       asm volatile("mrc p6, 0, %0, c8, c0, 0" : "=r" (irq));
+
+       return irq;
+}
+
 static void
 iop32x_irq_mask(struct irq_data *d)
 {
@@ -50,11 +59,25 @@ struct irq_chip ext_chip = {
        .irq_unmask     = iop32x_irq_unmask,
 };
 
+void iop_handle_irq(struct pt_regs *regs)
+{
+       u32 mask;
+
+       iop_enable_cp6();
+
+       do {
+               mask = iintsrc_read();
+               if (mask)
+                       generic_handle_irq(fls(mask));
+       } while (mask);
+}
+
 void __init iop32x_init_irq(void)
 {
        int i;
 
        iop_init_cp6_handler();
+       set_handle_irq(iop_handle_irq);
 
        intctl_write(0);
        intstr_write(0);