rockchip: pinctrl: move rk3328 grf reg definition in header file

Move GRF register bit definition into GRF header file, remove
'GRF_' prefix and add 'GPIOmXn_' as prefix for bit meaning.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>

diff --git a/arch/arm/include/asm/arch-rockchip/grf_rk3328.h b/arch/arm/include/asm/arch-rockchip/grf_rk3328.h
index 2776cef..40a4de0 100644 (file)
--- a/arch/arm/include/asm/arch-rockchip/grf_rk3328.h
+++ b/arch/arm/include/asm/arch-rockchip/grf_rk3328.h
@@ -131,4 +131,118 @@ struct rk3328_sgrf_regs {
 };
 check_member(rk3328_sgrf_regs, hdcp_key_access_mask, 0x2a0);
 
+enum {
+       /* GPIO0A_IOMUX */
+       GPIO0A5_SEL_SHIFT       = 10,
+       GPIO0A5_SEL_MASK        = 3 << GPIO0A5_SEL_SHIFT,
+       GPIO0A5_I2C3_SCL        = 2,
+
+       GPIO0A6_SEL_SHIFT       = 12,
+       GPIO0A6_SEL_MASK        = 3 << GPIO0A6_SEL_SHIFT,
+       GPIO0A6_I2C3_SDA        = 2,
+
+       GPIO0A7_SEL_SHIFT       = 14,
+       GPIO0A7_SEL_MASK        = 3 << GPIO0A7_SEL_SHIFT,
+       GPIO0A7_EMMC_DATA0      = 2,
+
+       /* GPIO0D_IOMUX*/
+       GPIO0D6_SEL_SHIFT       = 12,
+       GPIO0D6_SEL_MASK        = 3 << GPIO0D6_SEL_SHIFT,
+       GPIO0D6_GPIO            = 0,
+       GPIO0D6_SDMMC0_PWRENM1  = 3,
+
+       /* GPIO1A_IOMUX */
+       GPIO1A0_SEL_SHIFT       = 0,
+       GPIO1A0_SEL_MASK        = 0x3fff << GPIO1A0_SEL_SHIFT,
+       GPIO1A0_CARD_DATA_CLK_CMD_DETN  = 0x1555,
+
+       /* GPIO2A_IOMUX */
+       GPIO2A0_SEL_SHIFT       = 0,
+       GPIO2A0_SEL_MASK        = 3 << GPIO2A0_SEL_SHIFT,
+       GPIO2A0_UART2_TX_M1     = 1,
+
+       GPIO2A1_SEL_SHIFT       = 2,
+       GPIO2A1_SEL_MASK        = 3 << GPIO2A1_SEL_SHIFT,
+       GPIO2A1_UART2_RX_M1     = 1,
+
+       GPIO2A2_SEL_SHIFT       = 4,
+       GPIO2A2_SEL_MASK        = 3 << GPIO2A2_SEL_SHIFT,
+       GPIO2A2_PWM_IR          = 1,
+
+       GPIO2A4_SEL_SHIFT       = 8,
+       GPIO2A4_SEL_MASK        = 3 << GPIO2A4_SEL_SHIFT,
+       GPIO2A4_PWM_0           = 1,
+       GPIO2A4_I2C1_SDA,
+
+       GPIO2A5_SEL_SHIFT       = 10,
+       GPIO2A5_SEL_MASK        = 3 << GPIO2A5_SEL_SHIFT,
+       GPIO2A5_PWM_1           = 1,
+       GPIO2A5_I2C1_SCL,
+
+       GPIO2A6_SEL_SHIFT       = 12,
+       GPIO2A6_SEL_MASK        = 3 << GPIO2A6_SEL_SHIFT,
+       GPIO2A6_PWM_2           = 1,
+
+       GPIO2A7_SEL_SHIFT       = 14,
+       GPIO2A7_SEL_MASK        = 3 << GPIO2A7_SEL_SHIFT,
+       GPIO2A7_GPIO            = 0,
+       GPIO2A7_SDMMC0_PWRENM0,
+
+       /* GPIO2BL_IOMUX */
+       GPIO2BL0_SEL_SHIFT      = 0,
+       GPIO2BL0_SEL_MASK       = 0x3f << GPIO2BL0_SEL_SHIFT,
+       GPIO2BL0_SPI_CLK_TX_RX_M0       = 0x15,
+
+       GPIO2BL3_SEL_SHIFT      = 6,
+       GPIO2BL3_SEL_MASK       = 3 << GPIO2BL3_SEL_SHIFT,
+       GPIO2BL3_SPI_CSN0_M0    = 1,
+
+       GPIO2BL4_SEL_SHIFT      = 8,
+       GPIO2BL4_SEL_MASK       = 3 << GPIO2BL4_SEL_SHIFT,
+       GPIO2BL4_SPI_CSN1_M0    = 1,
+
+       GPIO2BL5_SEL_SHIFT      = 10,
+       GPIO2BL5_SEL_MASK       = 3 << GPIO2BL5_SEL_SHIFT,
+       GPIO2BL5_I2C2_SDA       = 1,
+
+       GPIO2BL6_SEL_SHIFT      = 12,
+       GPIO2BL6_SEL_MASK       = 3 << GPIO2BL6_SEL_SHIFT,
+       GPIO2BL6_I2C2_SCL       = 1,
+
+       /* GPIO2D_IOMUX */
+       GPIO2D0_SEL_SHIFT       = 0,
+       GPIO2D0_SEL_MASK        = 3 << GPIO2D0_SEL_SHIFT,
+       GPIO2D0_I2C0_SCL        = 1,
+
+       GPIO2D1_SEL_SHIFT       = 2,
+       GPIO2D1_SEL_MASK        = 3 << GPIO2D1_SEL_SHIFT,
+       GPIO2D1_I2C0_SDA        = 1,
+
+       GPIO2D4_SEL_SHIFT       = 8,
+       GPIO2D4_SEL_MASK        = 0xff << GPIO2D4_SEL_SHIFT,
+       GPIO2D4_EMMC_DATA1234   = 0xaa,
+
+       /* GPIO3C_IOMUX */
+       GPIO3C0_SEL_SHIFT       = 0,
+       GPIO3C0_SEL_MASK        = 0x3fff << GPIO3C0_SEL_SHIFT,
+       GPIO3C0_EMMC_DATA567_PWR_CLK_RSTN_CMD   = 0x2aaa,
+
+       /* COM_IOMUX */
+       UART2_IOMUX_SEL_SHIFT   = 0,
+       UART2_IOMUX_SEL_MASK    = 3 << UART2_IOMUX_SEL_SHIFT,
+       UART2_IOMUX_SEL_M0              = 0,
+       UART2_IOMUX_SEL_M1,
+
+       SPI_IOMUX_SEL_SHIFT = 4,
+       SPI_IOMUX_SEL_MASK      = 3 << SPI_IOMUX_SEL_SHIFT,
+       SPI_IOMUX_SEL_M0        = 0,
+       SPI_IOMUX_SEL_M1,
+       SPI_IOMUX_SEL_M2,
+
+       CARD_IOMUX_SEL_SHIFT    = 7,
+       CARD_IOMUX_SEL_MASK             = 1 << CARD_IOMUX_SEL_SHIFT,
+       CARD_IOMUX_SEL_M0               = 0,
+       CARD_IOMUX_SEL_M1,
+};
+
 #endif /* __SOC_ROCKCHIP_RK3328_GRF_H__ */

diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3328.c b/drivers/pinctrl/rockchip/pinctrl_rk3328.c
index b6beec5..cf3435e 100644 (file)
--- a/drivers/pinctrl/rockchip/pinctrl_rk3328.c
+++ b/drivers/pinctrl/rockchip/pinctrl_rk3328.c
@@ -21,135 +21,28 @@ struct rk3328_pinctrl_priv {
        struct rk3328_grf_regs *grf;
 };
 
-enum {
-       /* GRF_GPIO0A_IOMUX */
-       GRF_GPIO0A5_SEL_SHIFT   = 10,
-       GRF_GPIO0A5_SEL_MASK    = 3 << GRF_GPIO0A5_SEL_SHIFT,
-       GRF_I2C3_SCL            = 2,
-
-       GRF_GPIO0A6_SEL_SHIFT   = 12,
-       GRF_GPIO0A6_SEL_MASK    = 3 << GRF_GPIO0A6_SEL_SHIFT,
-       GRF_I2C3_SDA            = 2,
-
-       GRF_GPIO0A7_SEL_SHIFT   = 14,
-       GRF_GPIO0A7_SEL_MASK    = 3 << GRF_GPIO0A7_SEL_SHIFT,
-       GRF_EMMC_DATA0          = 2,
-
-       /* GRF_GPIO1A_IOMUX */
-       GRF_GPIO1A0_SEL_SHIFT   = 0,
-       GRF_GPIO1A0_SEL_MASK    = 0x3fff << GRF_GPIO1A0_SEL_SHIFT,
-       GRF_CARD_DATA_CLK_CMD_DETN      = 0x1555,
-
-       /* GRF_GPIO2A_IOMUX */
-       GRF_GPIO2A0_SEL_SHIFT   = 0,
-       GRF_GPIO2A0_SEL_MASK    = 3 << GRF_GPIO2A0_SEL_SHIFT,
-       GRF_UART2_TX_M1         = 1,
-
-       GRF_GPIO2A1_SEL_SHIFT   = 2,
-       GRF_GPIO2A1_SEL_MASK    = 3 << GRF_GPIO2A1_SEL_SHIFT,
-       GRF_UART2_RX_M1         = 1,
-
-       GRF_GPIO2A2_SEL_SHIFT   = 4,
-       GRF_GPIO2A2_SEL_MASK    = 3 << GRF_GPIO2A2_SEL_SHIFT,
-       GRF_PWM_IR              = 1,
-
-       GRF_GPIO2A4_SEL_SHIFT   = 8,
-       GRF_GPIO2A4_SEL_MASK    = 3 << GRF_GPIO2A4_SEL_SHIFT,
-       GRF_PWM_0               = 1,
-       GRF_I2C1_SDA,
-
-       GRF_GPIO2A5_SEL_SHIFT   = 10,
-       GRF_GPIO2A5_SEL_MASK    = 3 << GRF_GPIO2A5_SEL_SHIFT,
-       GRF_PWM_1               = 1,
-       GRF_I2C1_SCL,
-
-       GRF_GPIO2A6_SEL_SHIFT   = 12,
-       GRF_GPIO2A6_SEL_MASK    = 3 << GRF_GPIO2A6_SEL_SHIFT,
-       GRF_PWM_2               = 1,
-
-       GRF_GPIO2A7_SEL_SHIFT   = 14,
-       GRF_GPIO2A7_SEL_MASK    = 3 << GRF_GPIO2A7_SEL_SHIFT,
-       GRF_CARD_PWR_EN_M0      = 1,
-
-       /* GRF_GPIO2BL_IOMUX */
-       GRF_GPIO2BL0_SEL_SHIFT  = 0,
-       GRF_GPIO2BL0_SEL_MASK   = 0x3f << GRF_GPIO2BL0_SEL_SHIFT,
-       GRF_SPI_CLK_TX_RX_M0    = 0x15,
-
-       GRF_GPIO2BL3_SEL_SHIFT  = 6,
-       GRF_GPIO2BL3_SEL_MASK   = 3 << GRF_GPIO2BL3_SEL_SHIFT,
-       GRF_SPI_CSN0_M0         = 1,
-
-       GRF_GPIO2BL4_SEL_SHIFT  = 8,
-       GRF_GPIO2BL4_SEL_MASK   = 3 << GRF_GPIO2BL4_SEL_SHIFT,
-       GRF_SPI_CSN1_M0         = 1,
-
-       GRF_GPIO2BL5_SEL_SHIFT  = 10,
-       GRF_GPIO2BL5_SEL_MASK   = 3 << GRF_GPIO2BL5_SEL_SHIFT,
-       GRF_I2C2_SDA            = 1,
-
-       GRF_GPIO2BL6_SEL_SHIFT  = 12,
-       GRF_GPIO2BL6_SEL_MASK   = 3 << GRF_GPIO2BL6_SEL_SHIFT,
-       GRF_I2C2_SCL            = 1,
-
-       /* GRF_GPIO2D_IOMUX */
-       GRF_GPIO2D0_SEL_SHIFT   = 0,
-       GRF_GPIO2D0_SEL_MASK    = 3 << GRF_GPIO2D0_SEL_SHIFT,
-       GRF_I2C0_SCL            = 1,
-
-       GRF_GPIO2D1_SEL_SHIFT   = 2,
-       GRF_GPIO2D1_SEL_MASK    = 3 << GRF_GPIO2D1_SEL_SHIFT,
-       GRF_I2C0_SDA            = 1,
-
-       GRF_GPIO2D4_SEL_SHIFT   = 8,
-       GRF_GPIO2D4_SEL_MASK    = 0xff << GRF_GPIO2D4_SEL_SHIFT,
-       GRF_EMMC_DATA123        = 0xaa,
-
-       /* GRF_GPIO3C_IOMUX */
-       GRF_GPIO3C0_SEL_SHIFT   = 0,
-       GRF_GPIO3C0_SEL_MASK    = 0x3fff << GRF_GPIO3C0_SEL_SHIFT,
-       GRF_EMMC_DATA567_PWR_CLK_RSTN_CMD       = 0x2aaa,
-
-       /* GRF_COM_IOMUX */
-       GRF_UART2_IOMUX_SEL_SHIFT       = 0,
-       GRF_UART2_IOMUX_SEL_MASK        = 3 << GRF_UART2_IOMUX_SEL_SHIFT,
-       GRF_UART2_IOMUX_SEL_M0          = 0,
-       GRF_UART2_IOMUX_SEL_M1,
-
-       GRF_SPI_IOMUX_SEL_SHIFT = 4,
-       GRF_SPI_IOMUX_SEL_MASK  = 3 << GRF_SPI_IOMUX_SEL_SHIFT,
-       GRF_SPI_IOMUX_SEL_M0    = 0,
-       GRF_SPI_IOMUX_SEL_M1,
-       GRF_SPI_IOMUX_SEL_M2,
-
-       GRF_CARD_IOMUX_SEL_SHIFT        = 7,
-       GRF_CARD_IOMUX_SEL_MASK         = 1 << GRF_CARD_IOMUX_SEL_SHIFT,
-       GRF_CARD_IOMUX_SEL_M0           = 0,
-       GRF_CARD_IOMUX_SEL_M1,
-};
-
 static void pinctrl_rk3328_pwm_config(struct rk3328_grf_regs *grf, int pwm_id)
 {
        switch (pwm_id) {
        case PERIPH_ID_PWM0:
                rk_clrsetreg(&grf->gpio2a_iomux,
-                            GRF_GPIO2A4_SEL_MASK,
-                            GRF_PWM_0 << GRF_GPIO2A4_SEL_SHIFT);
+                            GPIO2A4_SEL_MASK,
+                            GPIO2A4_PWM_0 << GPIO2A4_SEL_SHIFT);
                break;
        case PERIPH_ID_PWM1:
                rk_clrsetreg(&grf->gpio2a_iomux,
-                            GRF_GPIO2A5_SEL_MASK,
-                            GRF_PWM_1 << GRF_GPIO2A5_SEL_SHIFT);
+                            GPIO2A5_SEL_MASK,
+                            GPIO2A5_PWM_1 << GPIO2A5_SEL_SHIFT);
                break;
        case PERIPH_ID_PWM2:
                rk_clrsetreg(&grf->gpio2a_iomux,
-                            GRF_GPIO2A6_SEL_MASK,
-                            GRF_PWM_2 << GRF_GPIO2A6_SEL_SHIFT);
+                            GPIO2A6_SEL_MASK,
+                            GPIO2A6_PWM_2 << GPIO2A6_SEL_SHIFT);
                break;
        case PERIPH_ID_PWM3:
                rk_clrsetreg(&grf->gpio2a_iomux,
-                            GRF_GPIO2A2_SEL_MASK,
-                            GRF_PWM_IR << GRF_GPIO2A2_SEL_SHIFT);
+                            GPIO2A2_SEL_MASK,
+                            GPIO2A2_PWM_IR << GPIO2A2_SEL_SHIFT);
                break;
        default:
                debug("pwm id = %d iomux error!\n", pwm_id);
@@ -162,27 +55,27 @@ static void pinctrl_rk3328_i2c_config(struct rk3328_grf_regs *grf, int i2c_id)
        switch (i2c_id) {
        case PERIPH_ID_I2C0:
                rk_clrsetreg(&grf->gpio2d_iomux,
-                            GRF_GPIO2D0_SEL_MASK | GRF_GPIO2D1_SEL_MASK,
-                            GRF_I2C0_SCL << GRF_GPIO2D0_SEL_SHIFT
-                            | GRF_I2C0_SDA << GRF_GPIO2D1_SEL_SHIFT);
+                            GPIO2D0_SEL_MASK | GPIO2D1_SEL_MASK,
+                            GPIO2D0_I2C0_SCL << GPIO2D0_SEL_SHIFT |
+                            GPIO2D1_I2C0_SDA << GPIO2D1_SEL_SHIFT);
                break;
        case PERIPH_ID_I2C1:
                rk_clrsetreg(&grf->gpio2a_iomux,
-                            GRF_GPIO2A4_SEL_MASK | GRF_GPIO2A5_SEL_MASK,
-                            GRF_I2C1_SCL << GRF_GPIO2A5_SEL_SHIFT
-                            | GRF_I2C1_SDA << GRF_GPIO2A4_SEL_SHIFT);
+                            GPIO2A4_SEL_MASK | GPIO2A5_SEL_MASK,
+                            GPIO2A5_I2C1_SCL << GPIO2A5_SEL_SHIFT |
+                            GPIO2A4_I2C1_SDA << GPIO2A4_SEL_SHIFT);
                break;
        case PERIPH_ID_I2C2:
                rk_clrsetreg(&grf->gpio2bl_iomux,
-                            GRF_GPIO2BL5_SEL_MASK | GRF_GPIO2BL6_SEL_MASK,
-                            GRF_I2C2_SCL << GRF_GPIO2BL6_SEL_SHIFT
-                            | GRF_I2C2_SDA << GRF_GPIO2BL6_SEL_SHIFT);
+                            GPIO2BL5_SEL_MASK | GPIO2BL6_SEL_MASK,
+                            GPIO2BL6_I2C2_SCL << GPIO2BL6_SEL_SHIFT |
+                            GPIO2BL5_I2C2_SDA << GPIO2BL5_SEL_SHIFT);
                break;
        case PERIPH_ID_I2C3:
                rk_clrsetreg(&grf->gpio0a_iomux,
-                            GRF_GPIO0A5_SEL_MASK | GRF_GPIO0A6_SEL_MASK,
-                            GRF_I2C3_SCL << GRF_GPIO0A5_SEL_SHIFT
-                            | GRF_I2C3_SDA << GRF_GPIO0A6_SEL_SHIFT);
+                            GPIO0A5_SEL_MASK | GPIO0A6_SEL_MASK,
+                            GPIO0A5_I2C3_SCL << GPIO0A5_SEL_SHIFT |
+                            GPIO0A6_I2C3_SDA << GPIO0A6_SEL_SHIFT);
                break;
        default:
                debug("i2c id = %d iomux error!\n", i2c_id);
@@ -205,28 +98,30 @@ static int pinctrl_rk3328_spi_config(struct rk3328_grf_regs *grf,
                                     enum periph_id spi_id, int cs)
 {
        rk_clrsetreg(&grf->com_iomux,
-                    GRF_SPI_IOMUX_SEL_MASK,
-                    GRF_SPI_IOMUX_SEL_M0 << GRF_SPI_IOMUX_SEL_SHIFT);
+                    SPI_IOMUX_SEL_MASK,
+                    SPI_IOMUX_SEL_M0 << SPI_IOMUX_SEL_SHIFT);
 
        switch (spi_id) {
        case PERIPH_ID_SPI0:
                switch (cs) {
                case 0:
                        rk_clrsetreg(&grf->gpio2bl_iomux,
-                                    GRF_GPIO2BL3_SEL_MASK,
-                                    GRF_SPI_CSN0_M0 << GRF_GPIO2BL3_SEL_SHIFT);
+                                    GPIO2BL3_SEL_MASK,
+                                    GPIO2BL3_SPI_CSN0_M0
+                                    << GPIO2BL3_SEL_SHIFT);
                        break;
                case 1:
                        rk_clrsetreg(&grf->gpio2bl_iomux,
-                                    GRF_GPIO2BL4_SEL_MASK,
-                                    GRF_SPI_CSN1_M0 << GRF_GPIO2BL4_SEL_SHIFT);
+                                    GPIO2BL4_SEL_MASK,
+                                    GPIO2BL4_SPI_CSN1_M0
+                                    << GPIO2BL4_SEL_SHIFT);
                        break;
                default:
                        goto err;
                }
                rk_clrsetreg(&grf->gpio2bl_iomux,
-                            GRF_GPIO2BL0_SEL_MASK,
-                            GRF_SPI_CLK_TX_RX_M0 << GRF_GPIO2BL0_SEL_SHIFT);
+                            GPIO2BL0_SEL_MASK,
+                            GPIO2BL0_SPI_CLK_TX_RX_M0 << GPIO2BL0_SEL_SHIFT);
                break;
        default:
                goto err;
@@ -245,13 +140,13 @@ static void pinctrl_rk3328_uart_config(struct rk3328_grf_regs *grf, int uart_id)
                break;
                /* uart2 iomux select m1 */
                rk_clrsetreg(&grf->com_iomux,
-                            GRF_UART2_IOMUX_SEL_MASK,
-                            GRF_UART2_IOMUX_SEL_M1
-                            << GRF_UART2_IOMUX_SEL_SHIFT);
+                            UART2_IOMUX_SEL_MASK,
+                            UART2_IOMUX_SEL_M1
+                            << UART2_IOMUX_SEL_SHIFT);
                rk_clrsetreg(&grf->gpio2a_iomux,
-                            GRF_GPIO2A0_SEL_MASK | GRF_GPIO2A1_SEL_MASK,
-                            GRF_UART2_TX_M1 << GRF_GPIO2A0_SEL_SHIFT |
-                            GRF_UART2_RX_M1 << GRF_GPIO2A1_SEL_SHIFT);
+                            GPIO2A0_SEL_MASK | GPIO2A1_SEL_MASK,
+                            GPIO2A0_UART2_TX_M1 << GPIO2A0_SEL_SHIFT |
+                            GPIO2A1_UART2_RX_M1 << GPIO2A1_SEL_SHIFT);
                break;
        case PERIPH_ID_UART0:
        case PERIPH_ID_UART1:
@@ -269,28 +164,28 @@ static void pinctrl_rk3328_sdmmc_config(struct rk3328_grf_regs *grf,
        switch (mmc_id) {
        case PERIPH_ID_EMMC:
                rk_clrsetreg(&grf->gpio0a_iomux,
-                            GRF_GPIO0A7_SEL_MASK,
-                            GRF_EMMC_DATA0 << GRF_GPIO0A7_SEL_SHIFT);
+                            GPIO0A7_SEL_MASK,
+                            GPIO0A7_EMMC_DATA0 << GPIO0A7_SEL_SHIFT);
                rk_clrsetreg(&grf->gpio2d_iomux,
-                            GRF_GPIO2D4_SEL_MASK,
-                            GRF_EMMC_DATA123 << GRF_GPIO2D4_SEL_SHIFT);
+                            GPIO2D4_SEL_MASK,
+                            GPIO2D4_EMMC_DATA1234 << GPIO2D4_SEL_SHIFT);
                rk_clrsetreg(&grf->gpio3c_iomux,
-                            GRF_GPIO3C0_SEL_MASK,
-                            GRF_EMMC_DATA567_PWR_CLK_RSTN_CMD
-                            << GRF_GPIO3C0_SEL_SHIFT);
+                            GPIO3C0_SEL_MASK,
+                            GPIO3C0_EMMC_DATA567_PWR_CLK_RSTN_CMD
+                            << GPIO3C0_SEL_SHIFT);
                break;
        case PERIPH_ID_SDCARD:
                /* sdcard iomux select m0 */
                rk_clrsetreg(&grf->com_iomux,
-                            GRF_CARD_IOMUX_SEL_MASK,
-                            GRF_CARD_IOMUX_SEL_M0 << GRF_CARD_IOMUX_SEL_SHIFT);
+                            CARD_IOMUX_SEL_MASK,
+                            CARD_IOMUX_SEL_M0 << CARD_IOMUX_SEL_SHIFT);
                rk_clrsetreg(&grf->gpio2a_iomux,
-                            GRF_GPIO2A7_SEL_MASK,
-                            GRF_CARD_PWR_EN_M0 << GRF_GPIO2A7_SEL_SHIFT);
+                            GPIO2A7_SEL_MASK,
+                            GPIO2A7_SDMMC0_PWRENM0 << GPIO2A7_SEL_SHIFT);
                rk_clrsetreg(&grf->gpio1a_iomux,
-                            GRF_GPIO1A0_SEL_MASK,
-                            GRF_CARD_DATA_CLK_CMD_DETN
-                            << GRF_GPIO1A0_SEL_SHIFT);
+                            GPIO1A0_SEL_MASK,
+                            GPIO1A0_CARD_DATA_CLK_CMD_DETN
+                            << GPIO1A0_SEL_SHIFT);
                break;
        default:
                debug("mmc id = %d iomux error!\n", mmc_id);