Kconfig: Replace spaces with tabs and missing newline

Trivial Kconfig cleanup. Use tabs instead of spaces and every Kconfig
entry should be separated by newline.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8d0cb52..f9d3f79 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -169,7 +169,7 @@ config ARM_ERRATA_833471
        bool
 
 config ARM_ERRATA_845369
-       bool
+       bool
 
 config ARM_ERRATA_852421
        bool
@@ -683,7 +683,7 @@ config ARCH_MX31
        select CPU_ARM1136
 
 config ARCH_MX7ULP
-        bool "NXP MX7ULP"
+       bool "NXP MX7ULP"
        select CPU_V7A
        select ROM_UNIFIED_SECTIONS
        imply MXC_GPIO
@@ -709,7 +709,7 @@ config ARCH_MX6
 
 if ARCH_MX6
 config SPL_LDSCRIPT
-        default "arch/arm/mach-omap2/u-boot-spl.lds"
+       default "arch/arm/mach-omap2/u-boot-spl.lds"
 endif
 
 config ARCH_MX5
@@ -1488,8 +1488,8 @@ source "arch/arm/Kconfig.debug"
 endmenu
 
 config SPL_LDSCRIPT
-        default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
-        default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
+       default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
+       default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
        default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
 
 

diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index d4bc60a..8bd4d68 100644 (file)
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -301,11 +301,11 @@ config TARGET_MX6SLEVK
        select SUPPORT_SPL
 
 config TARGET_MX6SLLEVK
-        bool "mx6sll evk"
+       bool "mx6sll evk"
        select BOARD_LATE_INIT
-        select MX6SLL
-        select DM
-        select DM_THERMAL
+       select MX6SLL
+       select DM
+       select DM_THERMAL
 
 config TARGET_MX6SXSABRESD
        bool "mx6sxsabresd"
@@ -317,11 +317,11 @@ config TARGET_MX6SXSABRESD
        select BOARD_EARLY_INIT_F
 
 config TARGET_MX6SXSABREAUTO
-        bool "mx6sxsabreauto"
+       bool "mx6sxsabreauto"
        select BOARD_LATE_INIT
        select MX6SX
-        select DM
-        select DM_THERMAL
+       select DM
+       select DM_THERMAL
        select BOARD_EARLY_INIT_F
 
 config TARGET_MX6UL_9X9_EVK

diff --git a/cmd/Kconfig b/cmd/Kconfig
index 0cf530d..ff89065 100644 (file)
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1012,11 +1012,12 @@ config CMD_USB_SDP
        help
          Enables the command "sdp" which is used to have U-Boot emulating the
          Serial Download Protocol (SDP) via USB.
+
 config CMD_ROCKUSB
        bool "rockusb"
        depends on USB_FUNCTION_ROCKUSB
        help
-          Rockusb protocol is widely used by Rockchip SoC based devices. It can
+         Rockusb protocol is widely used by Rockchip SoC based devices. It can
          read/write info, image to/from devices. This enable rockusb command
          support to communication with rockusb device. for more detail about
          this command, please read doc/README.rockusb.
@@ -1489,7 +1490,7 @@ config CMD_BLOB
          the original data.
 
          Sub-commands:
-            blob enc - encapsulating data as a cryptgraphic blob
+           blob enc - encapsulating data as a cryptgraphic blob
            blob dec - decapsulating cryptgraphic blob to get the data
 
          Syntax: