{
ulong now = GPTCNT; /* current tick value */
- if (now >= gd->lastinc) /* normal mode (non roll) */
+ if (now >= gd->arch.lastinc) /* normal mode (non roll) */
/* move stamp forward with absolut diff ticks */
- gd->tbl += (now - gd->lastinc);
+ gd->arch.tbl += (now - gd->arch.lastinc);
else /* we have rollover of incrementer */
- gd->tbl += (0xFFFFFFFF - gd->lastinc) + now;
- gd->lastinc = now;
- return gd->tbl;
+ gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now;
+ gd->arch.lastinc = now;
+ return gd->arch.tbl;
}
ulong get_timer_masked(void)
{
#ifdef CONFIG_FSL_ESDHC
#if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
#elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
#else
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
#endif
#endif
return 0;
DECLARE_GLOBAL_DATA_PTR;
-#define timestamp (gd->tbl)
-#define lastinc (gd->lastinc)
+#define timestamp (gd->arch.tbl)
+#define lastinc (gd->arch.lastinc)
/* General purpose timers bitfields */
#define GPTCR_SWR (1<<15) /* Software reset */
*((int32_t *) (CONFIG_SYS_TIMERBASE + TCLR)) = val; /* start timer */
/* reset time */
- gd->lastinc = READ_TIMER; /* capture current incrementer value */
- gd->tbl = 0; /* start "advancing" time stamp */
+ gd->arch.lastinc = READ_TIMER; /* capture current incrementer value */
+ gd->arch.tbl = 0; /* start "advancing" time stamp */
return(0);
}
tmp = get_timer (0); /* get current timestamp */
if ((tmo + tmp + 1) < tmp) { /* if setting this forward will roll */
/* time stamp, then reset time */
- gd->lastinc = READ_TIMER; /* capture incrementer value */
- gd->tbl = 0; /* start time stamp */
+ gd->arch.lastinc = READ_TIMER; /* capture incrementer value */
+ gd->arch.tbl = 0; /* start time stamp */
} else {
tmo += tmp; /* else, set advancing stamp wake up time */
}
{
ulong now = READ_TIMER; /* current tick value */
- if (now >= gd->lastinc) /* normal mode (non roll) */
- gd->tbl += (now - gd->lastinc); /* move stamp fordward with absoulte diff ticks */
- else /* we have rollover of incrementer */
- gd->tbl += (0xFFFFFFFF - gd->lastinc) + now;
- gd->lastinc = now;
- return gd->tbl;
+ if (now >= gd->arch.lastinc) { /* normal mode (non roll) */
+ /* move stamp fordward with absoulte diff ticks */
+ gd->arch.tbl += (now - gd->arch.lastinc);
+ } else {
+ /* we have rollover of incrementer */
+ gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now;
+ }
+ gd->arch.lastinc = now;
+ return gd->arch.tbl;
}
/* waits specified delay value and resets timestamp */
static inline unsigned long long tick_to_time(unsigned long long tick)
{
tick *= CONFIG_SYS_HZ;
- do_div(tick, gd->timer_rate_hz);
+ do_div(tick, gd->arch.timer_rate_hz);
return tick;
}
static inline unsigned long long usec_to_tick(unsigned long long usec)
{
- usec *= gd->timer_rate_hz;
+ usec *= gd->arch.timer_rate_hz;
do_div(usec, 1000000);
return usec;
cr |= FTTMR010_TM3_ENABLE;
writel(cr, &tmr->cr);
- gd->timer_rate_hz = TIMER_CLOCK;
- gd->tbu = gd->tbl = 0;
+ gd->arch.timer_rate_hz = TIMER_CLOCK;
+ gd->arch.tbu = gd->arch.tbl = 0;
return 0;
}
ulong now = TIMER_LOAD_VAL - readl(&tmr->timer3_counter);
/* increment tbu if tbl has rolled over */
- if (now < gd->tbl)
- gd->tbu++;
- gd->tbl = now;
- return (((unsigned long long)gd->tbu) << 32) | gd->tbl;
+ if (now < gd->arch.tbl)
+ gd->arch.tbu++;
+ gd->arch.tbl = now;
+ return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
}
void __udelay(unsigned long usec)
*/
ulong get_tbclk(void)
{
- return gd->timer_rate_hz;
+ return gd->arch.timer_rate_hz;
}
case AT91_PMC_MCKR_CSS_SLOW:
return CONFIG_SYS_AT91_SLOW_CLOCK;
case AT91_PMC_MCKR_CSS_MAIN:
- return gd->main_clk_rate_hz;
+ return gd->arch.main_clk_rate_hz;
case AT91_PMC_MCKR_CSS_PLLA:
- return gd->plla_rate_hz;
+ return gd->arch.plla_rate_hz;
case AT91_PMC_MCKR_CSS_PLLB:
- return gd->pllb_rate_hz;
+ return gd->arch.pllb_rate_hz;
}
return 0;
main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
}
#endif
- gd->main_clk_rate_hz = main_clock;
+ gd->arch.main_clk_rate_hz = main_clock;
/* report if PLLA is more than mildly overclocked */
- gd->plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
+ gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
#ifdef CONFIG_USB_ATMEL
/*
*
* REVISIT: assumes MCK doesn't derive from PLLB!
*/
- gd->at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
+ gd->arch.at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
AT91_PMC_PLLBR_USBDIV_2;
- gd->pllb_rate_hz = at91_pll_rate(main_clock, gd->at91_pllb_usb_init);
+ gd->arch.pllb_rate_hz = at91_pll_rate(main_clock,
+ gd->arch.at91_pllb_usb_init);
#endif
/*
* For now, assume this parentage won't change.
*/
mckr = readl(&pmc->mckr);
- gd->mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
- freq = gd->mck_rate_hz;
+ gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
+ freq = gd->arch.mck_rate_hz;
freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2)); /* prescale */
/* mdiv */
- gd->mck_rate_hz = freq / (1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
- gd->cpu_clk_rate_hz = freq;
+ gd->arch.mck_rate_hz = freq /
+ (1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
+ gd->arch.cpu_clk_rate_hz = freq;
return 0;
}
writel(TIMER_LOAD_VAL, &tc->tc[0].rc);
writel(AT91_TC_CCR_SWTRG | AT91_TC_CCR_CLKEN, &tc->tc[0].ccr);
- gd->lastinc = 0;
- gd->tbl = 0;
+ gd->arch.lastinc = 0;
+ gd->arch.tbl = 0;
return 0;
}
now = readl(&tc->tc[0].cv) & 0x0000ffff;
- if (now >= gd->lastinc) {
+ if (now >= gd->arch.lastinc) {
/* normal mode */
- gd->tbl += now - gd->lastinc;
+ gd->arch.tbl += now - gd->arch.lastinc;
} else {
/* we have an overflow ... */
- gd->tbl += now + TIMER_LOAD_VAL - gd->lastinc;
+ gd->arch.tbl += now + TIMER_LOAD_VAL - gd->arch.lastinc;
}
- gd->lastinc = now;
+ gd->arch.lastinc = now;
- return gd->tbl;
+ return gd->arch.tbl;
}
ulong get_timer_masked(void)
/* use PWM Timer 4 because it has no output */
/* prescaler for Timer 4 is 16 */
writel(0x0f00, &timers->tcfg0);
- if (gd->tbu == 0) {
+ if (gd->arch.tbu == 0) {
/*
* for 10 ms clock period @ PCLK with 4 bit divider = 1/2
* (default) and prescaler = 16. Should be 10390
* @33.25MHz and 15625 @ 50 MHz
*/
- gd->tbu = get_PCLK() / (2 * 16 * 100);
- gd->timer_rate_hz = get_PCLK() / (2 * 16);
+ gd->arch.tbu = get_PCLK() / (2 * 16 * 100);
+ gd->arch.timer_rate_hz = get_PCLK() / (2 * 16);
}
/* load value for 10 ms timeout */
- writel(gd->tbu, &timers->tcntb4);
+ writel(gd->arch.tbu, &timers->tcntb4);
/* auto load, manual update of timer 4 */
tmr = (readl(&timers->tcon) & ~0x0700000) | 0x0600000;
writel(tmr, &timers->tcon);
/* auto load, start timer 4 */
tmr = (tmr & ~0x0700000) | 0x0500000;
writel(tmr, &timers->tcon);
- gd->lastinc = 0;
- gd->tbl = 0;
+ gd->arch.lastinc = 0;
+ gd->arch.tbl = 0;
return 0;
}
ulong start = get_ticks();
tmo = usec / 1000;
- tmo *= (gd->tbu * 100);
+ tmo *= (gd->arch.tbu * 100);
tmo /= 1000;
while ((ulong) (get_ticks() - start) < tmo)
{
ulong tmr = get_ticks();
- return tmr / (gd->timer_rate_hz / CONFIG_SYS_HZ);
+ return tmr / (gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
}
void udelay_masked(unsigned long usec)
if (usec >= 1000) {
tmo = usec / 1000;
- tmo *= (gd->tbu * 100);
+ tmo *= (gd->arch.tbu * 100);
tmo /= 1000;
} else {
- tmo = usec * (gd->tbu * 100);
+ tmo = usec * (gd->arch.tbu * 100);
tmo /= (1000 * 1000);
}
struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
ulong now = readl(&timers->tcnto4) & 0xffff;
- if (gd->lastinc >= now) {
+ if (gd->arch.lastinc >= now) {
/* normal mode */
- gd->tbl += gd->lastinc - now;
+ gd->arch.tbl += gd->arch.lastinc - now;
} else {
/* we have an overflow ... */
- gd->tbl += gd->lastinc + gd->tbu - now;
+ gd->arch.tbl += gd->arch.lastinc + gd->arch.tbu - now;
}
- gd->lastinc = now;
+ gd->arch.lastinc = now;
- return gd->tbl;
+ return gd->arch.tbl;
}
/*
#define COUNT_RD_REQ 0x1
DECLARE_GLOBAL_DATA_PTR;
-/* Using gd->tbu from timestamp and gd->tbl for lastdec */
+/* Using gd->arch.tbu from timestamp and gd->arch.tbl for lastdec */
/* For preventing risk of instability in reading counter value,
* first set read request to register cvwr and then read same
{
ulong now = read_timer();
- if (now >= gd->tbl) {
+ if (now >= gd->arch.tbl) {
/* normal mode */
- gd->tbu += now - gd->tbl;
+ gd->arch.tbu += now - gd->arch.tbl;
} else {
/* we have an overflow ... */
- gd->tbu += now + TIMER_LOAD_VAL - gd->tbl;
+ gd->arch.tbu += now + TIMER_LOAD_VAL - gd->arch.tbl;
}
- gd->tbl = now;
+ gd->arch.tbl = now;
- return gd->tbu;
+ return gd->arch.tbu;
}
ulong get_timer(ulong base)
/* Enable timer 0 */
writel(0x1, &armd1timers->cer);
- /* init the gd->tbu and gd->tbl value */
- gd->tbl = read_timer();
- gd->tbu = 0;
+ /* init the gd->arch.tbu and gd->arch.tbl value */
+ gd->arch.tbl = read_timer();
+ gd->arch.tbu = 0;
return 0;
}
case AT91_PMC_MCKR_CSS_SLOW:
return CONFIG_SYS_AT91_SLOW_CLOCK;
case AT91_PMC_MCKR_CSS_MAIN:
- return gd->main_clk_rate_hz;
+ return gd->arch.main_clk_rate_hz;
case AT91_PMC_MCKR_CSS_PLLA:
- return gd->plla_rate_hz;
+ return gd->arch.plla_rate_hz;
case AT91_PMC_MCKR_CSS_PLLB:
- return gd->pllb_rate_hz;
+ return gd->arch.pllb_rate_hz;
}
return 0;
main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
}
#endif
- gd->main_clk_rate_hz = main_clock;
+ gd->arch.main_clk_rate_hz = main_clock;
/* report if PLLA is more than mildly overclocked */
- gd->plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
+ gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
#ifdef CONFIG_USB_ATMEL
/*
*
* REVISIT: assumes MCK doesn't derive from PLLB!
*/
- gd->at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
+ gd->arch.at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
AT91_PMC_PLLBR_USBDIV_2;
- gd->pllb_rate_hz = at91_pll_rate(main_clock, gd->at91_pllb_usb_init);
+ gd->arch.pllb_rate_hz = at91_pll_rate(main_clock,
+ gd->arch.at91_pllb_usb_init);
#endif
/*
#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
|| defined(CONFIG_AT91SAM9X5)
/* plla divisor by 2 */
- gd->plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
+ gd->arch.plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
#endif
- gd->mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
- freq = gd->mck_rate_hz;
+ gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
+ freq = gd->arch.mck_rate_hz;
freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2)); /* prescale */
#if defined(CONFIG_AT91SAM9G20)
/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
- gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ?
+ gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ?
freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq;
if (mckr & AT91_PMC_MCKR_MDIV_MASK)
freq /= 2; /* processor clock division */
* 2 <==> 4
* 3 <==> 3
*/
- gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
+ gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
(AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
? freq / 3
: freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
#else
- gd->mck_rate_hz = freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
+ gd->arch.mck_rate_hz = freq /
+ (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
#endif
- gd->cpu_clk_rate_hz = freq;
+ gd->arch.cpu_clk_rate_hz = freq;
return 0;
}
static inline unsigned long long tick_to_time(unsigned long long tick)
{
tick *= CONFIG_SYS_HZ;
- do_div(tick, gd->timer_rate_hz);
+ do_div(tick, gd->arch.timer_rate_hz);
return tick;
}
static inline unsigned long long usec_to_tick(unsigned long long usec)
{
- usec *= gd->timer_rate_hz;
+ usec *= gd->arch.timer_rate_hz;
do_div(usec, 1000000);
return usec;
/* Enable PITC */
writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
- gd->timer_rate_hz = gd->mck_rate_hz / 16;
- gd->tbu = gd->tbl = 0;
+ gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16;
+ gd->arch.tbu = gd->arch.tbl = 0;
return 0;
}
ulong now = readl(&pit->piir);
/* increment tbu if tbl has rolled over */
- if (now < gd->tbl)
- gd->tbu++;
- gd->tbl = now;
- return (((unsigned long long)gd->tbu) << 32) | gd->tbl;
+ if (now < gd->arch.tbl)
+ gd->arch.tbu++;
+ gd->arch.tbl = now;
+ return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
}
void __udelay(unsigned long usec)
*/
ulong get_tbclk(void)
{
- return gd->timer_rate_hz;
+ return gd->arch.timer_rate_hz;
}
writel(0x0, &timer->tim34);
writel(TIMER_LOAD_VAL, &timer->prd34);
writel(2 << 22, &timer->tcr);
- gd->timer_rate_hz = CONFIG_SYS_HZ_CLOCK / TIM_CLK_DIV;
- gd->timer_reset_value = 0;
+ gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK / TIM_CLK_DIV;
+ gd->arch.timer_reset_value = 0;
return(0);
}
unsigned long now = readl(&timer->tim34);
/* increment tbu if tbl has rolled over */
- if (now < gd->tbl)
- gd->tbu++;
- gd->tbl = now;
+ if (now < gd->arch.tbl)
+ gd->arch.tbu++;
+ gd->arch.tbl = now;
- return (((unsigned long long)gd->tbu) << 32) | gd->tbl;
+ return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
}
ulong get_timer(ulong base)
{
unsigned long long timer_diff;
- timer_diff = get_ticks() - gd->timer_reset_value;
+ timer_diff = get_ticks() - gd->arch.timer_reset_value;
- return lldiv(timer_diff, (gd->timer_rate_hz / CONFIG_SYS_HZ)) - base;
+ return lldiv(timer_diff,
+ (gd->arch.timer_rate_hz / CONFIG_SYS_HZ)) - base;
}
void __udelay(unsigned long usec)
{
unsigned long long endtime;
- endtime = lldiv((unsigned long long)usec * gd->timer_rate_hz,
+ endtime = lldiv((unsigned long long)usec * gd->arch.timer_rate_hz,
1000000UL);
endtime += get_ticks();
*/
ulong get_tbclk(void)
{
- return gd->timer_rate_hz;
+ return gd->arch.timer_rate_hz;
}
#ifdef CONFIG_HW_WATCHDOG
DECLARE_GLOBAL_DATA_PTR;
-#define timestamp gd->tbl
-#define lastdec gd->lastinc
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
ulong get_timer_masked(void)
{
DECLARE_GLOBAL_DATA_PTR;
-#define timestamp gd->tbl
-#define lastdec gd->lastinc
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
static inline unsigned long long tick_to_time(unsigned long long tick)
{
{
#ifdef CONFIG_FSL_ESDHC
#if CONFIG_SYS_FSL_ESDHC_ADDR == IMX_MMC_SDHC2_BASE
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
#else
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
#endif
#endif
return 0;
DECLARE_GLOBAL_DATA_PTR;
-#define timestamp (gd->tbl)
-#define lastinc (gd->lastinc)
+#define timestamp (gd->arch.tbl)
+#define lastinc (gd->arch.lastinc)
/*
* "time" is measured in 1 / CONFIG_SYS_HZ seconds,
DECLARE_GLOBAL_DATA_PTR;
-#define timestamp (gd->tbl)
-#define lastinc (gd->lastinc)
+#define timestamp (gd->arch.tbl)
+#define lastinc (gd->arch.lastinc)
/*
* "time" is measured in 1 / CONFIG_SYS_HZ seconds,
DECLARE_GLOBAL_DATA_PTR;
-#define timestamp (gd->tbl)
-#define lastdec (gd->lastinc)
+#define timestamp (gd->arch.tbl)
+#define lastdec (gd->arch.lastinc)
/*
* This driver uses 1kHz clock source.
DECLARE_GLOBAL_DATA_PTR;
-#define timestamp gd->tbl
-#define lastdec gd->lastinc
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
int timer_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
-#define timestamp gd->tbl
-#define lastdec gd->lastinc
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
ulong get_timer_masked(void)
{
#define COUNT_RD_REQ 0x1
DECLARE_GLOBAL_DATA_PTR;
-/* Using gd->tbu from timestamp and gd->tbl for lastdec */
+/* Using gd->arch.tbu from timestamp and gd->arch.tbl for lastdec */
/*
* For preventing risk of instability in reading counter value,
{
ulong now = read_timer();
- if (now >= gd->tbl) {
+ if (now >= gd->arch.tbl) {
/* normal mode */
- gd->tbu += now - gd->tbl;
+ gd->arch.tbu += now - gd->arch.tbl;
} else {
/* we have an overflow ... */
- gd->tbu += now + TIMER_LOAD_VAL - gd->tbl;
+ gd->arch.tbu += now + TIMER_LOAD_VAL - gd->arch.tbl;
}
- gd->tbl = now;
+ gd->arch.tbl = now;
- return gd->tbu;
+ return gd->arch.tbu;
}
ulong get_timer(ulong base)
/* Enable timer 0 */
writel(0x1, &panthtimers->cer);
- /* init the gd->tbu and gd->tbl value */
- gd->tbl = read_timer();
- gd->tbu = 0;
+ /* init the gd->arch.tbu and gd->arch.tbl value */
+ gd->arch.tbl = read_timer();
+ gd->arch.tbu = 0;
return 0;
}
DECLARE_GLOBAL_DATA_PTR;
-#define timestamp gd->tbl
-#define lastdec gd->lastinc
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
int timer_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
-#define timestamp gd->tbl
-#define lastdec gd->lastinc
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
#define TIMER_ENABLE (1 << 7)
#define TIMER_MODE_MSK (1 << 6)
&timer_base->tclr);
/* reset time, capture current incrementer value time */
- gd->lastinc = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ);
- gd->tbl = 0; /* start "advancing" time stamp from 0 */
+ gd->arch.lastinc = readl(&timer_base->tcrr) /
+ (TIMER_CLOCK / CONFIG_SYS_HZ);
+ gd->arch.tbl = 0; /* start "advancing" time stamp from 0 */
return 0;
}
/* current tick value */
ulong now = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ);
- if (now >= gd->lastinc) /* normal mode (non roll) */
+ if (now >= gd->arch.lastinc) { /* normal mode (non roll) */
/* move stamp fordward with absoulte diff ticks */
- gd->tbl += (now - gd->lastinc);
- else /* we have rollover of incrementer */
- gd->tbl += ((TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ))
- - gd->lastinc) + now;
- gd->lastinc = now;
- return gd->tbl;
+ gd->arch.tbl += (now - gd->arch.lastinc);
+ } else { /* we have rollover of incrementer */
+ gd->arch.tbl += ((TIMER_LOAD_VAL / (TIMER_CLOCK /
+ CONFIG_SYS_HZ)) - gd->arch.lastinc) + now;
+ }
+ gd->arch.lastinc = now;
+ return gd->arch.tbl;
}
/*
struct s5p_timer *const timer = s5p_get_base_timer();
/* reset time */
- gd->lastinc = readl(&timer->tcnto4);
- gd->tbl = 0;
+ gd->arch.lastinc = readl(&timer->tcnto4);
+ gd->arch.tbl = 0;
}
unsigned long get_timer_masked(void)
unsigned long now = readl(&timer->tcnto4);
unsigned long count_value = readl(&timer->tcntb4);
- if (gd->lastinc >= now)
- gd->tbl += gd->lastinc - now;
+ if (gd->arch.lastinc >= now)
+ gd->arch.tbl += gd->arch.lastinc - now;
else
- gd->tbl += gd->lastinc + count_value - now;
+ gd->arch.tbl += gd->arch.lastinc + count_value - now;
- gd->lastinc = now;
+ gd->arch.lastinc = now;
- return gd->tbl;
+ return gd->arch.tbl;
}
/*
{
/* current tick value */
ulong now = read_timer() / (CONFIG_TIMER_CLOCK_KHZ/CONFIG_SYS_HZ);
- if (gd->lastinc >= now) {
+ if (gd->arch.lastinc >= now) {
/* normal mode (non roll) */
/* move stamp forward with absolute diff ticks */
- gd->tbl += gd->lastinc - now;
+ gd->arch.tbl += gd->arch.lastinc - now;
} else {
/* we have overflow of the count down timer */
- gd->tbl += TIMER_LOAD_VAL - gd->lastinc + now;
+ gd->arch.tbl += TIMER_LOAD_VAL - gd->arch.lastinc + now;
}
- gd->lastinc = now;
- return gd->tbl;
+ gd->arch.lastinc = now;
+ return gd->arch.tbl;
}
/*
void reset_timer(void)
{
/* capture current decrementer value time */
- gd->lastinc = read_timer() / (CONFIG_TIMER_CLOCK_KHZ/CONFIG_SYS_HZ);
+ gd->arch.lastinc = read_timer() /
+ (CONFIG_TIMER_CLOCK_KHZ / CONFIG_SYS_HZ);
/* start "advancing" time stamp from 0 */
- gd->tbl = 0;
+ gd->arch.tbl = 0;
}
/* current tick value */
ulong now = TICKS_TO_HZ(READ_TIMER());
- if (now >= gd->lastinc) /* normal (non rollover) */
- gd->tbl += (now - gd->lastinc);
- else /* rollover */
- gd->tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) - gd->lastinc) + now;
- gd->lastinc = now;
- return gd->tbl;
+ if (now >= gd->arch.lastinc) { /* normal (non rollover) */
+ gd->arch.tbl += (now - gd->arch.lastinc);
+ } else { /* rollover */
+ gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) -
+ gd->arch.lastinc) + now;
+ }
+ gd->arch.lastinc = now;
+ return gd->arch.tbl;
}
/* Delay x useconds */
/*
* Emulation of Power architecture long long timebase.
*
- * TODO: Support gd->tbu for real long long timebase.
+ * TODO: Support gd->arch.tbu for real long long timebase.
*/
unsigned long long get_ticks(void)
{
emask);
/* Reset time */
- gd->lastinc = readl(&timer_base->counter) /
+ gd->arch.lastinc = readl(&timer_base->counter) /
(TIMER_TICK_HZ / CONFIG_SYS_HZ);
- gd->tbl = 0;
+ gd->arch.tbl = 0;
return 0;
}
now = readl(&timer_base->counter) / (TIMER_TICK_HZ / CONFIG_SYS_HZ);
- if (gd->lastinc >= now) {
+ if (gd->arch.lastinc >= now) {
/* Normal mode */
- gd->tbl += gd->lastinc - now;
+ gd->arch.tbl += gd->arch.lastinc - now;
} else {
/* We have an overflow ... */
- gd->tbl += gd->lastinc + TIMER_LOAD_VAL - now;
+ gd->arch.tbl += gd->arch.lastinc + TIMER_LOAD_VAL - now;
}
- gd->lastinc = now;
+ gd->arch.lastinc = now;
- return gd->tbl;
+ return gd->arch.tbl;
}
void __udelay(unsigned long usec)
if (readl(IXP425_OSST) & IXP425_OSST_TIMER_TS_PEND) {
/* rollover of timestamp timer register */
- gd->timestamp += (0xFFFFFFFF - gd->lastinc) + now + 1;
+ gd->arch.timestamp += (0xFFFFFFFF - gd->arch.lastinc) + now + 1;
writel(IXP425_OSST_TIMER_TS_PEND, IXP425_OSST);
} else {
/* move stamp forward with absolut diff ticks */
- gd->timestamp += (now - gd->lastinc);
+ gd->arch.timestamp += (now - gd->arch.lastinc);
}
- gd->lastinc = now;
- return gd->timestamp;
+ gd->arch.lastinc = now;
+ return gd->arch.timestamp;
}
void reset_timer_masked(void)
{
/* capture current timestamp counter */
- gd->lastinc = readl(IXP425_OSTS_B);
+ gd->arch.lastinc = readl(IXP425_OSTS_B);
/* start "advancing" time stamp from 0 */
- gd->timestamp = 0;
+ gd->arch.timestamp = 0;
}
ulong get_timer_masked(void)
#define TIMER_LOAD_VAL 0xffffffff
-#define timestamp (gd->tbl)
-#define lastinc (gd->lastinc)
+#define timestamp (gd->arch.tbl)
+#define lastinc (gd->arch.lastinc)
#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define TIMER_FREQ_HZ 3250000
/* current tick value */
now = timer_get_us() / (TIMER_CLK / CONFIG_SYS_HZ);
- if (now >= gd->lastinc) /* normal mode (non roll) */
+ if (now >= gd->arch.lastinc) /* normal mode (non roll) */
/* move stamp forward with absolute diff ticks */
- gd->tbl += (now - gd->lastinc);
+ gd->arch.tbl += (now - gd->arch.lastinc);
else /* we have rollover of incrementer */
- gd->tbl += ((TIMER_LOAD_VAL / (TIMER_CLK / CONFIG_SYS_HZ))
- - gd->lastinc) + now;
- gd->lastinc = now;
- return gd->tbl;
+ gd->arch.tbl += ((TIMER_LOAD_VAL / (TIMER_CLK / CONFIG_SYS_HZ))
+ - gd->arch.lastinc) + now;
+ gd->arch.lastinc = now;
+ return gd->arch.tbl;
}
/*
#ifdef CONFIG_FSL_ESDHC
#ifdef CONFIG_FSL_USDHC
#if CONFIG_SYS_FSL_ESDHC_ADDR == USDHC2_BASE_ADDR
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
#elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC3_BASE_ADDR
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
#elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC4_BASE_ADDR
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
#else
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
#endif
#else
#if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
#elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
#elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC4_BASE_ADDR
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
#else
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
#endif
#endif
#endif
DECLARE_GLOBAL_DATA_PTR;
-#define timestamp (gd->tbl)
-#define lastinc (gd->lastinc)
+#define timestamp (gd->arch.tbl)
+#define lastinc (gd->arch.lastinc)
static inline unsigned long long tick_to_time(unsigned long long tick)
{
static inline unsigned long get_cpu_clk_rate(void)
{
DECLARE_GLOBAL_DATA_PTR;
- return gd->cpu_clk_rate_hz;
+ return gd->arch.cpu_clk_rate_hz;
}
static inline unsigned long get_main_clk_rate(void)
{
DECLARE_GLOBAL_DATA_PTR;
- return gd->main_clk_rate_hz;
+ return gd->arch.main_clk_rate_hz;
}
static inline unsigned long get_mck_clk_rate(void)
{
DECLARE_GLOBAL_DATA_PTR;
- return gd->mck_rate_hz;
+ return gd->arch.mck_rate_hz;
}
static inline unsigned long get_plla_clk_rate(void)
{
DECLARE_GLOBAL_DATA_PTR;
- return gd->plla_rate_hz;
+ return gd->arch.plla_rate_hz;
}
static inline unsigned long get_pllb_clk_rate(void)
{
DECLARE_GLOBAL_DATA_PTR;
- return gd->pllb_rate_hz;
+ return gd->arch.pllb_rate_hz;
}
static inline u32 get_pllb_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
- return gd->at91_pllb_usb_init;
+ return gd->arch.at91_pllb_usb_init;
}
static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory which is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long have_console; /* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
- unsigned long precon_buf_idx; /* Pre-Console buffer index */
-#endif
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid? */
- unsigned long fb_base; /* base address of frame buffer */
-#ifdef CONFIG_FSL_ESDHC
- unsigned long sdhc_clk;
+/* Architecture-specific global data */
+struct arch_global_data {
+#if defined(CONFIG_FSL_ESDHC)
+ u32 sdhc_clk;
#endif
#ifdef CONFIG_AT91FAMILY
/* "static data" needed by at91's clock.c */
unsigned long pllb_rate_hz;
unsigned long at91_pllb_usb_init;
#endif
-#ifdef CONFIG_ARM
/* "static data" needed by most of timer.c on ARM platforms */
- unsigned long timer_rate_hz;
- unsigned long tbl;
- unsigned long tbu;
- unsigned long long timer_reset_value;
- unsigned long lastinc;
-#endif
+ unsigned long timer_rate_hz;
+ unsigned long tbu;
+ unsigned long tbl;
+ unsigned long lastinc;
+ unsigned long long timer_reset_value;
#ifdef CONFIG_IXP425
- unsigned long timestamp;
+ unsigned long timestamp;
#endif
- unsigned long relocaddr; /* Start address of U-Boot in RAM */
- phys_size_t ram_size; /* RAM size */
- unsigned long mon_len; /* monitor len */
- unsigned long irq_sp; /* irq stack pointer */
- unsigned long start_addr_sp; /* start_addr_stackpointer */
- unsigned long reloc_off;
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
- unsigned long tlb_addr;
- unsigned long tlb_size;
-#endif
- const void *fdt_blob; /* Our device tree, NULL if none */
- void **jt; /* jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
- unsigned long post_log_word; /* Record POST activities */
- unsigned long post_log_res; /* success of POST test */
- unsigned long post_init_f_time; /* When post_init_f started */
+ unsigned long tlb_addr;
+ unsigned long tlb_size;
#endif
-} gd_t;
+};
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8")
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
/* reserve TLB table */
- gd->tlb_size = 4096 * 4;
- addr -= gd->tlb_size;
+ gd->arch.tlb_size = 4096 * 4;
+ addr -= gd->arch.tlb_size;
/* round down to next 64 kB limit */
addr &= ~(0x10000 - 1);
- gd->tlb_addr = addr;
- debug("TLB table from %08lx to %08lx\n", addr, addr + gd->tlb_size);
+ gd->arch.tlb_addr = addr;
+ debug("TLB table from %08lx to %08lx\n", addr, addr + gd->arch.tlb_size);
#endif
/* round down to next 4 kB limit */
void set_section_dcache(int section, enum dcache_option option)
{
- u32 *page_table = (u32 *)gd->tlb_addr;
+ u32 *page_table = (u32 *)gd->arch.tlb_addr;
u32 value;
value = (section << MMU_SECTION_SHIFT) | (3 << 10);
void mmu_set_region_dcache_behaviour(u32 start, int size,
enum dcache_option option)
{
- u32 *page_table = (u32 *)gd->tlb_addr;
+ u32 *page_table = (u32 *)gd->arch.tlb_addr;
u32 upto, end;
end = ALIGN(start + size, MMU_SECTION_SIZE) >> MMU_SECTION_SHIFT;
/* Copy the page table address to cp15 */
asm volatile("mcr p15, 0, %0, c2, c0, 0"
- : : "r" (gd->tlb_addr) : "memory");
+ : : "r" (gd->arch.tlb_addr) : "memory");
/* Set the access control to all-supervisor */
asm volatile("mcr p15, 0, %0, c3, c0, 0"
: : "r" (~0));
{
extern void _evba(void);
- gd->cpu_hz = CONFIG_SYS_OSC0_HZ;
+ gd->arch.cpu_hz = CONFIG_SYS_OSC0_HZ;
/* TODO: Move somewhere else, but needs to be run before we
* increase the clock frequency. */
clk_init();
/* Update the CPU speed according to the PLL configuration */
- gd->cpu_hz = get_cpu_clk_rate();
+ gd->arch.cpu_hz = get_cpu_clk_rate();
/* Set up the exception handler table and enable exceptions */
sysreg_write(EVBA, (unsigned long)&_evba);
printf("CPU Mode: %s\n", cpu_modes[mode]);
/* Avoid exception loops */
- if (regs->sp < (gd->stack_end - CONFIG_STACKSIZE)
- || regs->sp >= gd->stack_end)
+ if (regs->sp < (gd->arch.stack_end - CONFIG_STACKSIZE)
+ || regs->sp >= gd->arch.stack_end)
printf("\nStack pointer seems bogus, won't do stack dump\n");
else
- dump_mem("\nStack: ", regs->sp, gd->stack_end);
+ dump_mem("\nStack: ", regs->sp, gd->arch.stack_end);
panic("Unhandled exception\n");
}
unsigned long get_tbclk(void)
{
- return gd->cpu_hz;
+ return gd->arch.cpu_hz;
}
unsigned long long get_ticks(void)
sysreg_write(COUNT, 0);
tmp = (u64)CONFIG_SYS_HZ << 32;
- tmp += gd->cpu_hz / 2;
- do_div(tmp, gd->cpu_hz);
+ tmp += gd->arch.cpu_hz / 2;
+ do_div(tmp, gd->arch.cpu_hz);
tb_factor = (u32)tmp;
if (set_interrupt_handler(0, &timer_interrupt_handler, 3))
#ifndef __ASM_GLOBAL_DATA_H__
#define __ASM_GLOBAL_DATA_H__
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long stack_end; /* highest stack address */
- unsigned long have_console; /* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
- unsigned long precon_buf_idx; /* Pre-Console buffer index */
-#endif
- unsigned long reloc_off; /* Relocation Offset */
- unsigned long env_addr; /* Address of env struct */
- unsigned long env_valid; /* Checksum of env valid? */
- unsigned long cpu_hz; /* cpu core clock frequency */
-#if defined(CONFIG_LCD)
- void *fb_base; /* framebuffer address */
-#endif
- void **jt; /* jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+ unsigned long stack_end; /* highest stack address */
+ unsigned long cpu_hz; /* cpu core clock frequency */
+};
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm("r5")
/* And finally, a new, bigger stack. */
new_sp = (unsigned long *)addr;
- gd->stack_end = addr;
+ gd->arch.stack_end = addr;
*(--new_sp) = 0;
*(--new_sp) = 0;
params->hdr.size = tag_size(tag_clock);
params->u.clock.clock_id = ACLOCK_BOOTCPU;
params->u.clock.clock_flags = 0;
- params->u.clock.clock_hz = gd->cpu_hz;
+ params->u.clock.clock_hz = gd->arch.cpu_hz;
#ifdef CONFIG_AT32AP7000
/*
#include <asm/u-boot.h>
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned long board_type;
- unsigned int baudrate;
- unsigned long have_console; /* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
- unsigned long precon_buf_idx; /* Pre-Console buffer index */
-#endif
- phys_size_t ram_size; /* RAM size */
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid? */
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
- unsigned long post_log_word; /* Record POST activities */
- unsigned long post_log_res; /* success of POST test */
- unsigned long post_init_f_time; /* When post_init_f started */
-#endif
-
- void **jt; /* jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("P3")
printf(" CPU CLK %s MHz BUS CLK %s MHz FLB CLK %s MHz\n",
strmhz(buf1, gd->cpu_clk),
strmhz(buf2, gd->bus_clk),
- strmhz(buf3, gd->flb_clk));
+ strmhz(buf3, gd->arch.flb_clk));
printf(" INP CLK %s MHz VCO CLK %s MHz\n",
- strmhz(buf1, gd->inp_clk),
- strmhz(buf2, gd->vco_clk));
+ strmhz(buf1, gd->arch.inp_clk),
+ strmhz(buf2, gd->arch.vco_clk));
}
return 0;
((in_be32(&pll->pcr) & 0xFF000000) >> 24) *
CONFIG_SYS_INPUT_CLKSRC;
}
- gd->vco_clk = vco; /* Vco clock */
+ gd->arch.vco_clk = vco; /* Vco clock */
} else if (bootmode == 3) {
/* serial mode */
vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
- gd->vco_clk = vco; /* Vco clock */
+ gd->arch.vco_clk = vco; /* Vco clock */
}
if ((in_be16(&ccm->ccr) & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) {
/* Limp mode */
} else {
- gd->inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */
+ gd->arch.inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */
temp = (in_be32(&pll->pcr) & PLL_PCR_OUTDIV1_MASK) + 1;
gd->cpu_clk = vco / temp; /* cpu clock */
temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV2_MASK) >> 4) + 1;
- gd->flb_clk = vco / temp; /* flexbus clock */
- gd->bus_clk = gd->flb_clk;
+ gd->arch.flb_clk = vco / temp; /* flexbus clock */
+ gd->bus_clk = gd->arch.flb_clk;
}
#ifdef CONFIG_FSL_I2C
- gd->i2c1_clk = gd->bus_clk;
+ gd->arch.i2c1_clk = gd->bus_clk;
#endif
return (0);
gd->cpu_clk = (gd->bus_clk * 2);
#ifdef CONFIG_FSL_I2C
- gd->i2c1_clk = gd->bus_clk;
+ gd->arch.i2c1_clk = gd->bus_clk;
#endif
return (0);
#endif
#ifdef CONFIG_FSL_I2C
- gd->i2c1_clk = gd->bus_clk;
+ gd->arch.i2c1_clk = gd->bus_clk;
#ifdef CONFIG_SYS_I2C2_OFFSET
- gd->i2c2_clk = gd->bus_clk;
+ gd->arch.i2c2_clk = gd->bus_clk;
#endif
#endif
gd->cpu_clk = (gd->bus_clk * 3);
#ifdef CONFIG_FSL_I2C
- gd->i2c1_clk = gd->bus_clk;
+ gd->arch.i2c1_clk = gd->bus_clk;
#endif
return (0);
printf(" CPU CLK %s MHz BUS CLK %s MHz FLB CLK %s MHz\n",
strmhz(buf1, gd->cpu_clk),
strmhz(buf2, gd->bus_clk),
- strmhz(buf3, gd->flb_clk));
+ strmhz(buf3, gd->arch.flb_clk));
#ifdef CONFIG_PCI
printf(" PCI CLK %s MHz INP CLK %s MHz VCO CLK %s MHz\n",
strmhz(buf1, gd->pci_clk),
- strmhz(buf2, gd->inp_clk),
- strmhz(buf3, gd->vco_clk));
+ strmhz(buf2, gd->arch.inp_clk),
+ strmhz(buf3, gd->arch.vco_clk));
#else
printf(" INP CLK %s MHz VCO CLK %s MHz\n",
- strmhz(buf1, gd->inp_clk),
- strmhz(buf2, gd->vco_clk));
+ strmhz(buf1, gd->arch.inp_clk),
+ strmhz(buf2, gd->arch.vco_clk));
#endif
}
out_be32(&pll->pcr, pcrvalue);
}
- gd->vco_clk = vco; /* Vco clock */
+ gd->arch.vco_clk = vco; /* Vco clock */
} else if (bootmode == 2) {
/* Normal mode */
vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
out_be32(&pll->pcr, pcrvalue);
vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
}
- gd->vco_clk = vco; /* Vco clock */
+ gd->arch.vco_clk = vco; /* Vco clock */
} else if (bootmode == 3) {
/* serial mode */
vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
- gd->vco_clk = vco; /* Vco clock */
+ gd->arch.vco_clk = vco; /* Vco clock */
}
if ((in_be16(&ccm->ccr) & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) {
/* Limp mode */
} else {
- gd->inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */
+ gd->arch.inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */
temp = (in_be32(&pll->pcr) & PLL_PCR_OUTDIV1_MASK) + 1;
gd->cpu_clk = vco / temp; /* cpu clock */
gd->bus_clk = vco / temp; /* bus clock */
temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV3_MASK) >> 8) + 1;
- gd->flb_clk = vco / temp; /* FlexBus clock */
+ gd->arch.flb_clk = vco / temp; /* FlexBus clock */
#ifdef CONFIG_PCI
if (bPci) {
}
#ifdef CONFIG_FSL_I2C
- gd->i2c1_clk = gd->bus_clk;
+ gd->arch.i2c1_clk = gd->bus_clk;
#endif
}
#endif
#endif
#ifdef CONFIG_FSL_I2C
- gd->i2c1_clk = gd->bus_clk;
+ gd->arch.i2c1_clk = gd->bus_clk;
#endif
return (0);
gd->cpu_clk = (gd->bus_clk * 2);
#ifdef CONFIG_FSL_I2C
- gd->i2c1_clk = gd->bus_clk;
+ gd->arch.i2c1_clk = gd->bus_clk;
#endif
return (0);
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long cpu_clk; /* CPU clock in Hz! */
- unsigned long bus_clk;
-#ifdef CONFIG_PCI
- unsigned long pci_clk;
-#endif
-#ifdef CONFIG_EXTRA_CLOCK
- unsigned long inp_clk;
- unsigned long vco_clk;
- unsigned long flb_clk;
-#endif
+/* Architecture-specific global data */
+struct arch_global_data {
#ifdef CONFIG_FSL_I2C
unsigned long i2c1_clk;
unsigned long i2c2_clk;
#endif
- phys_size_t ram_size; /* RAM size */
- unsigned long reloc_off; /* Relocation Offset */
- unsigned long reset_status; /* reset status register at boot */
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid? */
- unsigned long have_console; /* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
- unsigned long precon_buf_idx; /* Pre-Console buffer index */
-#endif
-#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
- unsigned long fb_base; /* Base addr of framebuffer memory */
-#endif
-#ifdef CONFIG_BOARD_TYPES
- unsigned long board_type;
+#ifdef CONFIG_EXTRA_CLOCK
+ unsigned long inp_clk;
+ unsigned long vco_clk;
+ unsigned long flb_clk;
#endif
- void **jt; /* Standalone app jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-} gd_t;
+};
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
#if 0
extern gd_t *global_data;
bd->bi_pcifreq = gd->pci_clk; /* PCI Freq in Hz */
#endif
#ifdef CONFIG_EXTRA_CLOCK
- bd->bi_inpfreq = gd->inp_clk; /* input Freq in Hz */
- bd->bi_vcofreq = gd->vco_clk; /* vco Freq in Hz */
- bd->bi_flbfreq = gd->flb_clk; /* flexbus Freq in Hz */
+ bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */
+ bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */
+ bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */
#endif
bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long have_console; /* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
- unsigned long precon_buf_idx; /* Pre-Console buffer index */
-#endif
- unsigned long env_addr; /* Address of Environment struct */
- const void *fdt_blob; /* Our device tree, NULL if none */
- unsigned long env_valid; /* Checksum of Environment valid? */
- unsigned long fb_base; /* base address of frame buffer */
- void **jt; /* jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r31")
COBJS-y += board.o
COBJS-y += bootm.o
+COBJS-y += muldi3.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
--- /dev/null
+/*
+ * U-boot - muldi3.c contains routines for mult and div
+ *
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* Generic function got from GNU gcc package, libgcc2.c */
+#ifndef SI_TYPE_SIZE
+#define SI_TYPE_SIZE 32
+#endif
+#define __ll_B (1L << (SI_TYPE_SIZE / 2))
+#define __ll_lowpart(t) ((USItype) (t) % __ll_B)
+#define __ll_highpart(t) ((USItype) (t) / __ll_B)
+#define BITS_PER_UNIT 8
+
+#if !defined(umul_ppmm)
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ USItype __x0, __x1, __x2, __x3; \
+ USItype __ul, __vl, __uh, __vh; \
+ \
+ __ul = __ll_lowpart(u); \
+ __uh = __ll_highpart(u); \
+ __vl = __ll_lowpart(v); \
+ __vh = __ll_highpart(v); \
+ \
+ __x0 = (USItype) __ul * __vl; \
+ __x1 = (USItype) __ul * __vh; \
+ __x2 = (USItype) __uh * __vl; \
+ __x3 = (USItype) __uh * __vh; \
+ \
+ __x1 += __ll_highpart(__x0); /* this can't give carry */\
+ __x1 += __x2; /* but this indeed can */ \
+ if (__x1 < __x2) /* did we get it? */ \
+ __x3 += __ll_B; /* yes, add it in the proper pos. */ \
+ \
+ (w1) = __x3 + __ll_highpart(__x1); \
+ (w0) = __ll_lowpart(__x1) * __ll_B + __ll_lowpart(__x0);\
+ } while (0)
+#endif
+
+#if !defined(__umulsidi3)
+#define __umulsidi3(u, v) \
+ ({DIunion __w; \
+ umul_ppmm(__w.s.high, __w.s.low, u, v); \
+ __w.ll; })
+#endif
+
+typedef unsigned int USItype __attribute__ ((mode(SI)));
+typedef int SItype __attribute__ ((mode(SI)));
+typedef int DItype __attribute__ ((mode(DI)));
+typedef int word_type __attribute__ ((mode(__word__)));
+
+struct DIstruct {
+ SItype low, high;
+};
+typedef union {
+ struct DIstruct s;
+ DItype ll;
+} DIunion;
+
+DItype __muldi3(DItype u, DItype v)
+{
+ DIunion w;
+ DIunion uu, vv;
+
+ uu.ll = u, vv.ll = v;
+ /* panic("kernel panic for __muldi3"); */
+ w.ll = __umulsidi3(uu.s.low, vv.s.low);
+ w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
+ + (USItype) uu.s.high * (USItype) vv.s.low);
+
+ return w.ll;
+}
void reset_timer_masked(void)
{
/* reset time */
- gd->lastinc = readl(&tcu->tcnt0);
- gd->tbl = 0;
+ gd->arch.lastinc = readl(&tcu->tcnt0);
+ gd->arch.tbl = 0;
}
ulong get_timer_masked(void)
{
ulong now = readl(&tcu->tcnt0);
- if (gd->lastinc <= now)
- gd->tbl += now - gd->lastinc; /* normal mode */
+ if (gd->arch.lastinc <= now)
+ gd->arch.tbl += now - gd->arch.lastinc; /* normal mode */
else {
/* we have an overflow ... */
- gd->tbl += TIMER_FDATA + now - gd->lastinc;
+ gd->arch.tbl += TIMER_FDATA + now - gd->arch.lastinc;
}
- gd->lastinc = now;
+ gd->arch.lastinc = now;
- return gd->tbl;
+ return gd->arch.tbl;
}
void udelay_masked(unsigned long usec)
writel(1 << TIMER_CHAN, &tcu->tscr); /* enable timer clock */
writeb(1 << TIMER_CHAN, &tcu->tesr); /* start counting up */
- gd->lastinc = 0;
- gd->tbl = 0;
+ gd->arch.lastinc = 0;
+ gd->arch.tbl = 0;
return 0;
}
void set_timer(ulong t)
{
- gd->tbl = t;
+ gd->arch.tbl = t;
}
void __udelay(unsigned long usec)
#include <asm/regdef.h>
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
+/* Architecture-specific global data */
+struct arch_global_data {
#ifdef CONFIG_JZSOC
/* There are other clocks in the jz4740 */
- unsigned long cpu_clk; /* CPU core clock */
- unsigned long sys_clk; /* System bus clock */
- unsigned long per_clk; /* Peripheral bus clock */
- unsigned long mem_clk; /* Memory bus clock */
- unsigned long dev_clk; /* Device clock */
- /* "static data" needed by most of timer.c */
- unsigned long tbl;
- unsigned long lastinc;
-#endif
- unsigned int baudrate;
- unsigned long have_console; /* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
- unsigned long precon_buf_idx; /* Pre-Console buffer index */
+ unsigned long per_clk; /* Peripheral bus clock */
+ unsigned long dev_clk; /* Device clock */
#endif
- phys_size_t ram_size; /* RAM size */
- unsigned long reloc_off; /* Relocation Offset */
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid? */
- void **jt; /* jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-} gd_t;
+};
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("k0")
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long have_console; /* serial_init() was called */
-
- unsigned long reloc_off; /* Relocation Offset */
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid? */
- unsigned long fb_base; /* base address of frame buffer */
-
- unsigned long relocaddr; /* Start address of U-Boot in RAM */
- phys_size_t ram_size; /* RAM size */
- unsigned long mon_len; /* monitor len */
- unsigned long irq_sp; /* irq stack pointer */
- unsigned long start_addr_sp; /* start_addr_stackpointer */
-#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
- unsigned long tlb_addr;
-#endif
- void **jt; /* jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
#ifdef CONFIG_GLOBAL_DATA_NOT_REG10
extern volatile gd_t g_gd;
addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
-#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
- /* reserve TLB table */
- addr -= (4096 * 4);
-
- /* round down to next 64 kB limit */
- addr &= ~(0x10000 - 1);
-
- gd->tlb_addr = addr;
- debug("TLB table at: %08lx\n", addr);
-#endif
-
/* round down to next 4 kB limit */
addr &= ~(4096 - 1);
debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
#ifndef __ASM_NIOS2_GLOBALDATA_H_
#define __ASM_NIOS2_GLOBALDATA_H_
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long cpu_clk; /* CPU clock in Hz! */
- unsigned long have_console; /* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
- unsigned long precon_buf_idx; /* Pre-Console buffer index */
-#endif
- phys_size_t ram_size; /* RAM size */
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid */
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
- unsigned long post_log_word; /* Record POST activities */
- unsigned long post_log_res; /* success of POST test */
- unsigned long post_init_f_time; /* When post_init_f started */
-#endif
- void **jt; /* Standalone app jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("gp")
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long cpu_clk; /* CPU clock in Hz! */
- unsigned long have_console; /* serial_init() was called */
- phys_size_t ram_size; /* RAM size */
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid? */
- unsigned long fb_base; /* base address of frame buffer */
- void **jt; /* jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
/* OR32 GCC already has r10 set as fixed-use */
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r10")
}
printf ("at %s MHz, CSB at %s MHz (RSR=0x%04lx)\n",
strmhz(buf1, clock),
- strmhz(buf2, gd->csb_clk),
- gd->reset_status & 0xffff);
+ strmhz(buf2, gd->arch.csb_clk),
+ gd->arch.reset_status & 0xffff);
return 0;
}
#endif
/* RSR - Reset Status Register - clear all status */
- gd->reset_status = im->reset.rsr;
+ gd->arch.reset_status = im->reset.rsr;
out_be32(&im->reset.rsr, ~RSR_RES);
/*
{126, 128}
};
- ips = gd->ips_clk;
+ ips = gd->arch.ips_clk;
for (i = 7; i >= 0; i--) {
for (j = 7; j >= 0; j--) {
scl = 2 * (scltap[j].scl2tap +
ide_set_reset(0);
/* Init timings : we use PIO mode 0 timings */
- t = 1000000000 / gd->ips_clk; /* period in ns */
+ t = 1000000000 / gd->arch.ips_clk; /* period in ns */
cfg.bytes.field1 = 3;
cfg.bytes.field2 = 3;
cfg.bytes.field3 = (pio_specs.t1 + t) / t;
}
/* calculate divisor for setting PSC CTUR and CTLR registers */
- baseclk = (gd->ips_clk + 8) / 16;
+ baseclk = (gd->arch.ips_clk + 8) / 16;
div = (baseclk + (baudrate / 2)) / baudrate;
out_8(&psc->ctur, (div >> 8) & 0xff);
pci_clk = 333333;
}
- gd->ips_clk = ips_clk;
+ gd->arch.ips_clk = ips_clk;
gd->pci_clk = pci_clk;
- gd->csb_clk = csb_clk;
+ gd->arch.csb_clk = csb_clk;
gd->cpu_clk = core_clk;
gd->bus_clk = csb_clk;
return 0;
*********************************************/
ulong get_bus_freq (ulong dummy)
{
- return gd->csb_clk;
+ return gd->arch.csb_clk;
}
int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
printf("Clock configuration:\n");
printf(" CPU: %-4s MHz\n", strmhz(buf, gd->cpu_clk));
- printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
- printf(" IPS Bus: %-4s MHz\n", strmhz(buf, gd->ips_clk));
+ printf(" Coherent System Bus: %-4s MHz\n",
+ strmhz(buf, gd->arch.csb_clk));
+ printf(" IPS Bus: %-4s MHz\n",
+ strmhz(buf, gd->arch.ips_clk));
printf(" PCI: %-4s MHz\n", strmhz(buf, gd->pci_clk));
- printf(" DDR: %-4s MHz\n", strmhz(buf, 2*gd->csb_clk));
+ printf(" DDR: %-4s MHz\n",
+ strmhz(buf, 2 * gd->arch.csb_clk));
return 0;
}
{126, 128}
};
- ipb = gd->ipb_clk;
+ ipb = gd->arch.ipb_clk;
for (i = 7; i >= 0; i--) {
for (j = 7; j >= 0; j--) {
scl = 2 * (scltap[j].scl2tap +
psdma->PtdCntrl |= 1;
/* Init timings : we use PIO mode 0 timings */
- period = 1000000000 / gd->ipb_clk; /* period in ns */
+ period = 1000000000 / gd->arch.ipb_clk; /* period in ns */
t0 = CALC_TIMING (600);
t2_8 = CALC_TIMING (290);
/* select clock sources */
psc->psc_clock_select = 0;
- baseclk = (gd->ipb_clk + 16) / 32;
+ baseclk = (gd->arch.ipb_clk + 16) / 32;
/* switch to UART mode */
psc->sicr = 0;
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
unsigned long baseclk, div;
- baseclk = (gd->ipb_clk + 16) / 32;
+ baseclk = (gd->arch.ipb_clk + 16) / 32;
/* set up UART divisor */
div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
val = *(vu_long *)MPC5XXX_CDM_CFG;
if (val & (1 << 8)) {
- gd->ipb_clk = gd->bus_clk / 2;
+ gd->arch.ipb_clk = gd->bus_clk / 2;
} else {
- gd->ipb_clk = gd->bus_clk;
+ gd->arch.ipb_clk = gd->bus_clk;
}
switch (val & 3) {
- case 0: gd->pci_clk = gd->ipb_clk; break;
- case 1: gd->pci_clk = gd->ipb_clk / 2; break;
- default: gd->pci_clk = gd->bus_clk / 4; break;
+ case 0:
+ gd->pci_clk = gd->arch.ipb_clk;
+ break;
+ case 1:
+ gd->pci_clk = gd->arch.ipb_clk / 2;
+ break;
+ default:
+ gd->pci_clk = gd->bus_clk / 4;
+ break;
}
return (0);
printf (" Bus %s MHz, IPB %s MHz, PCI %s MHz\n",
strmhz(buf1, gd->bus_clk),
- strmhz(buf2, gd->ipb_clk),
+ strmhz(buf2, gd->arch.ipb_clk),
strmhz(buf3, gd->pci_clk)
);
return (0);
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
*/
- /* tbd - rtm */
- /*fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); */
- /* No MII for 7-wire mode */
+ /*
+ * tbd - rtm
+ * fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
+ * No MII for 7-wire mode
+ */
fec->eth->mii_speed = 0x00000030;
}
#error clock measuring not implemented yet - define CONFIG_SYS_MPC8220_CLKIN
#endif
- gd->inp_clk = CONFIG_SYS_MPC8220_CLKIN;
+ gd->arch.inp_clk = CONFIG_SYS_MPC8220_CLKIN;
/* Read XLB to PCI(INP) clock multiplier */
pci2bus = (*((volatile u32 *)PCI_REG_PCIGSCR) &
/* FlexBus is temporary set as the same as input clock */
/* will do dynamic in the future */
- gd->flb_clk = CONFIG_SYS_MPC8220_CLKIN;
+ gd->arch.flb_clk = CONFIG_SYS_MPC8220_CLKIN;
/* CPU Clock - Read HID1 */
asm volatile ("mfspr %0, 1009":"=r" (hid1):);
for (i = 0; i < size; i++)
if (hid1 == bus2core[i].hid1) {
gd->cpu_clk = (bus2core[i].multi * gd->bus_clk) >> 1;
- gd->vco_clk = CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER * (gd->pci_clk * bus2core[i].vco_div)/2;
+ gd->arch.vco_clk =
+ CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER *
+ (gd->pci_clk * bus2core[i].vco_div) / 2;
break;
}
/* hardcoded 81MHz for now */
- gd->pev_clk = 81000000;
+ gd->arch.pev_clk = 81000000;
return (0);
}
strmhz(buf1, gd->bus_clk),
strmhz(buf2, gd->cpu_clk),
strmhz(buf3, gd->pci_clk),
- strmhz(buf4, gd->vco_clk)
+ strmhz(buf4, gd->arch.vco_clk)
);
return (0);
}
/* Reclaim the DP memory for our use.
*/
- gd->dp_alloc_base = CPM_DATAONLY_BASE;
- gd->dp_alloc_top = gd->dp_alloc_base + CPM_DATAONLY_SIZE;
+ gd->arch.dp_alloc_base = CPM_DATAONLY_BASE;
+ gd->arch.dp_alloc_top = gd->arch.dp_alloc_base + CPM_DATAONLY_SIZE;
/*
* Reset CPM
uint savebase;
align_mask = align - 1;
- savebase = gd->dp_alloc_base;
+ savebase = gd->arch.dp_alloc_base;
- if ((off = (gd->dp_alloc_base & align_mask)) != 0)
- gd->dp_alloc_base += (align - off);
+ off = gd->arch.dp_alloc_base & align_mask;
+ if (off != 0)
+ gd->arch.dp_alloc_base += (align - off);
if ((off = size & align_mask) != 0)
size += align - off;
- if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) {
- gd->dp_alloc_base = savebase;
+ if ((gd->arch.dp_alloc_base + size) >= gd->arch.dp_alloc_top) {
+ gd->arch.dp_alloc_base = savebase;
panic("m8260_cpm_dpalloc: ran out of dual port ram!");
}
- retloc = gd->dp_alloc_base;
- gd->dp_alloc_base += size;
+ retloc = gd->arch.dp_alloc_base;
+ gd->arch.dp_alloc_base += size;
memset((void *)&immr->im_dprambase[retloc], 0, size);
* Baud rate clocks are zero-based in the driver code (as that maps
* to port numbers). Documentation uses 1-based numbering.
*/
-#define BRG_INT_CLK gd->brg_clk
+#define BRG_INT_CLK gd->arch.brg_clk
#define BRG_UART_CLK (BRG_INT_CLK / 16)
/* This function is used by UARTs, or anything else that uses a 16x
memset ((void *) gd, 0, sizeof (gd_t));
/* RSR - Reset Status Register - clear all status (5-4) */
- gd->reset_status = immr->im_clkrst.car_rsr;
+ gd->arch.reset_status = immr->im_clkrst.car_rsr;
immr->im_clkrst.car_rsr = RSR_ALLBITS;
/* RMR - Reset Mode Register - contains checkstop reset enable (5-5) */
RSR_EHRS, "External Hard"}
};
static int n = sizeof bits / sizeof bits[0];
- ulong rsr = gd->reset_status;
+ ulong rsr = gd->arch.reset_status;
int i;
char *sep;
* divide BRGCLK by 1)
*/
debug("[I2C] Setting rate...\n");
- i2c_setrate(gd->brg_clk, CONFIG_SYS_I2C_SPEED);
+ i2c_setrate(gd->arch.brg_clk, CONFIG_SYS_I2C_SPEED);
/* Set I2C controller in master mode */
i2c->i2c_i2com = 0x01;
(get_pvr () == PVR_8260_HIP7R1) ||
(get_pvr () == PVR_8260_HIP7RA)) {
pllmf = (scmr & SCMR_PLLMF_MSKH7) >> SCMR_PLLMF_SHIFT;
- gd->vco_out = clkin * (pllmf + 1);
+ gd->arch.vco_out = clkin * (pllmf + 1);
} else { /* HiP3, HiP4 */
pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
- gd->vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1);
+ gd->arch.vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1);
}
- gd->cpm_clk = gd->vco_out / 2;
+ gd->arch.cpm_clk = gd->arch.vco_out / 2;
gd->bus_clk = clkin;
- gd->scc_clk = gd->vco_out / 4;
- gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
+ gd->arch.scc_clk = gd->arch.vco_out / 4;
+ gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1)));
if (cp->b2c_mult > 0) {
gd->cpu_clk = (clkin * cp->b2c_mult) / 2;
pci_div = pcidf + 1;
}
- gd->pci_clk = (gd->cpm_clk * 2) / pci_div;
+ gd->pci_clk = (gd->arch.cpm_clk * 2) / pci_div;
}
#endif
plldf, pllmf, pcidf);
printf (" - vco_out %10ld, scc_clk %10ld, brg_clk %10ld\n",
- gd->vco_out, gd->scc_clk, gd->brg_clk);
+ gd->arch.vco_out, gd->arch.scc_clk, gd->arch.brg_clk);
printf (" - cpu_clk %10ld, cpm_clk %10ld, bus_clk %10ld\n",
- gd->cpu_clk, gd->cpm_clk, gd->bus_clk);
+ gd->cpu_clk, gd->arch.cpm_clk, gd->bus_clk);
#ifdef CONFIG_PCI
printf (" - pci_clk %10ld\n", gd->pci_clk);
#endif
printf(" at %s MHz, ", strmhz(buf, clock));
- printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk));
+ printf("CSB: %s MHz\n", strmhz(buf, gd->arch.csb_clk));
return 0;
}
clrsetbits_be32(&im->clk.sccr, sccr_mask, sccr_val);
/* RSR - Reset Status Register - clear all status (4.6.1.3) */
- gd->reset_status = __raw_readl(&im->reset.rsr);
+ gd->arch.reset_status = __raw_readl(&im->reset.rsr);
__raw_writel(~(RSR_RES), &im->reset.rsr);
/* AER - Arbiter Event Register - store status */
- gd->arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr);
- gd->arbiter_event_address = __raw_readl(&im->arbiter.aeadr);
+ gd->arch.arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr);
+ gd->arch.arbiter_event_address = __raw_readl(&im->arbiter.aeadr);
/*
* RMR - Reset Mode Register
"reserved"
};
- int etype = (gd->arbiter_event_attributes & AEATR_EVENT)
+ int etype = (gd->arch.arbiter_event_attributes & AEATR_EVENT)
>> AEATR_EVENT_SHIFT;
- int mstr_id = (gd->arbiter_event_attributes & AEATR_MSTR_ID)
+ int mstr_id = (gd->arch.arbiter_event_attributes & AEATR_MSTR_ID)
>> AEATR_MSTR_ID_SHIFT;
- int tbst = (gd->arbiter_event_attributes & AEATR_TBST)
+ int tbst = (gd->arch.arbiter_event_attributes & AEATR_TBST)
>> AEATR_TBST_SHIFT;
- int tsize = (gd->arbiter_event_attributes & AEATR_TSIZE)
+ int tsize = (gd->arch.arbiter_event_attributes & AEATR_TSIZE)
>> AEATR_TSIZE_SHIFT;
- int ttype = (gd->arbiter_event_attributes & AEATR_TTYPE)
+ int ttype = (gd->arch.arbiter_event_attributes & AEATR_TTYPE)
>> AEATR_TTYPE_SHIFT;
- if (!force && !gd->arbiter_event_address)
+ if (!force && !gd->arch.arbiter_event_address)
return 0;
puts("Arbiter Event Status:\n");
- printf(" Event Address: 0x%08lX\n", gd->arbiter_event_address);
+ printf(" Event Address: 0x%08lX\n",
+ gd->arch.arbiter_event_address);
printf(" Event Type: 0x%1x = %s\n", etype, event[etype]);
printf(" Master ID: 0x%02x = %s\n", mstr_id, master[mstr_id]);
printf(" Transfer Size: 0x%1x = %d bytes\n", (tbst<<3) | tsize,
tbst ? (tsize ? tsize : 8) : 16 + 8 * tsize);
printf(" Transfer Type: 0x%02x = %s\n", ttype, transfer[ttype]);
- return gd->arbiter_event_address;
+ return gd->arch.arbiter_event_address;
}
#elif defined(CONFIG_DISPLAY_AER_BRIEF)
static int print_83xx_arb_event(int force)
{
- if (!force && !gd->arbiter_event_address)
+ if (!force && !gd->arch.arbiter_event_address)
return 0;
printf("Arbiter Event Status: AEATR=0x%08lX, AEADR=0x%08lX\n",
- gd->arbiter_event_attributes, gd->arbiter_event_address);
+ gd->arch.arbiter_event_attributes,
+ gd->arch.arbiter_event_address);
- return gd->arbiter_event_address;
+ return gd->arch.arbiter_event_address;
}
#endif /* CONFIG_DISPLAY_AER_xxxx */
RSR_HRS, "External/Internal Hard"}
};
static int n = sizeof bits / sizeof bits[0];
- ulong rsr = gd->reset_status;
+ ulong rsr = gd->arch.reset_status;
int i;
char *sep;
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", gd->core_clk, 1);
+ "clock-frequency", gd->arch.core_clk, 1);
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,soc",
get_clocks();
/* Configure the PCIE controller core clock ratio */
out_le32(hose_cfg_base + PEX_GCLK_RATIO,
- (((bus ? gd->pciexp2_clk : gd->pciexp1_clk) / 1000000) * 16)
- / 333);
+ (((bus ? gd->arch.pciexp2_clk : gd->arch.pciexp1_clk)
+ / 1000000) * 16) / 333);
udelay(1000000);
/* Do Type 1 bridge configuration */
brg_clk = qe_clk / 2;
#endif
- gd->csb_clk = csb_clk;
+ gd->arch.csb_clk = csb_clk;
#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
- gd->tsec1_clk = tsec1_clk;
- gd->tsec2_clk = tsec2_clk;
- gd->usbdr_clk = usbdr_clk;
+ gd->arch.tsec1_clk = tsec1_clk;
+ gd->arch.tsec2_clk = tsec2_clk;
+ gd->arch.usbdr_clk = usbdr_clk;
#elif defined(CONFIG_MPC8309)
- gd->usbdr_clk = usbdr_clk;
+ gd->arch.usbdr_clk = usbdr_clk;
#endif
#if defined(CONFIG_MPC834x)
- gd->usbmph_clk = usbmph_clk;
+ gd->arch.usbmph_clk = usbmph_clk;
#endif
#if defined(CONFIG_MPC8315)
- gd->tdm_clk = tdm_clk;
+ gd->arch.tdm_clk = tdm_clk;
#endif
#if defined(CONFIG_FSL_ESDHC)
- gd->sdhc_clk = sdhc_clk;
+ gd->arch.sdhc_clk = sdhc_clk;
#endif
- gd->core_clk = core_clk;
- gd->i2c1_clk = i2c1_clk;
+ gd->arch.core_clk = core_clk;
+ gd->arch.i2c1_clk = i2c1_clk;
#if !defined(CONFIG_MPC832x)
- gd->i2c2_clk = i2c2_clk;
+ gd->arch.i2c2_clk = i2c2_clk;
#endif
#if !defined(CONFIG_MPC8309)
- gd->enc_clk = enc_clk;
+ gd->arch.enc_clk = enc_clk;
#endif
- gd->lbiu_clk = lbiu_clk;
- gd->lclk_clk = lclk_clk;
+ gd->arch.lbiu_clk = lbiu_clk;
+ gd->arch.lclk_clk = lclk_clk;
gd->mem_clk = mem_clk;
#if defined(CONFIG_MPC8360)
- gd->mem_sec_clk = mem_sec_clk;
+ gd->arch.mem_sec_clk = mem_sec_clk;
#endif
#if defined(CONFIG_QE)
- gd->qe_clk = qe_clk;
- gd->brg_clk = brg_clk;
+ gd->arch.qe_clk = qe_clk;
+ gd->arch.brg_clk = brg_clk;
#endif
#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC837x)
- gd->pciexp1_clk = pciexp1_clk;
- gd->pciexp2_clk = pciexp2_clk;
+ gd->arch.pciexp1_clk = pciexp1_clk;
+ gd->arch.pciexp2_clk = pciexp2_clk;
#endif
#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- gd->sata_clk = sata_clk;
+ gd->arch.sata_clk = sata_clk;
#endif
gd->pci_clk = pci_sync_in;
- gd->cpu_clk = gd->core_clk;
- gd->bus_clk = gd->csb_clk;
+ gd->cpu_clk = gd->arch.core_clk;
+ gd->bus_clk = gd->arch.csb_clk;
return 0;
}
*********************************************/
ulong get_bus_freq(ulong dummy)
{
- return gd->csb_clk;
+ return gd->arch.csb_clk;
}
/********************************************
char buf[32];
printf("Clock configuration:\n");
- printf(" Core: %-4s MHz\n", strmhz(buf, gd->core_clk));
- printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
+ printf(" Core: %-4s MHz\n",
+ strmhz(buf, gd->arch.core_clk));
+ printf(" Coherent System Bus: %-4s MHz\n",
+ strmhz(buf, gd->arch.csb_clk));
#if defined(CONFIG_QE)
- printf(" QE: %-4s MHz\n", strmhz(buf, gd->qe_clk));
- printf(" BRG: %-4s MHz\n", strmhz(buf, gd->brg_clk));
-#endif
- printf(" Local Bus Controller:%-4s MHz\n", strmhz(buf, gd->lbiu_clk));
- printf(" Local Bus: %-4s MHz\n", strmhz(buf, gd->lclk_clk));
+ printf(" QE: %-4s MHz\n",
+ strmhz(buf, gd->arch.qe_clk));
+ printf(" BRG: %-4s MHz\n",
+ strmhz(buf, gd->arch.brg_clk));
+#endif
+ printf(" Local Bus Controller:%-4s MHz\n",
+ strmhz(buf, gd->arch.lbiu_clk));
+ printf(" Local Bus: %-4s MHz\n",
+ strmhz(buf, gd->arch.lclk_clk));
printf(" DDR: %-4s MHz\n", strmhz(buf, gd->mem_clk));
#if defined(CONFIG_MPC8360)
- printf(" DDR Secondary: %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
+ printf(" DDR Secondary: %-4s MHz\n",
+ strmhz(buf, gd->arch.mem_sec_clk));
#endif
#if !defined(CONFIG_MPC8309)
- printf(" SEC: %-4s MHz\n", strmhz(buf, gd->enc_clk));
+ printf(" SEC: %-4s MHz\n",
+ strmhz(buf, gd->arch.enc_clk));
#endif
- printf(" I2C1: %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
+ printf(" I2C1: %-4s MHz\n",
+ strmhz(buf, gd->arch.i2c1_clk));
#if !defined(CONFIG_MPC832x)
- printf(" I2C2: %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
+ printf(" I2C2: %-4s MHz\n",
+ strmhz(buf, gd->arch.i2c2_clk));
#endif
#if defined(CONFIG_MPC8315)
- printf(" TDM: %-4s MHz\n", strmhz(buf, gd->tdm_clk));
+ printf(" TDM: %-4s MHz\n",
+ strmhz(buf, gd->arch.tdm_clk));
#endif
#if defined(CONFIG_FSL_ESDHC)
- printf(" SDHC: %-4s MHz\n", strmhz(buf, gd->sdhc_clk));
+ printf(" SDHC: %-4s MHz\n",
+ strmhz(buf, gd->arch.sdhc_clk));
#endif
#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
- printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
- printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
- printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
+ printf(" TSEC1: %-4s MHz\n",
+ strmhz(buf, gd->arch.tsec1_clk));
+ printf(" TSEC2: %-4s MHz\n",
+ strmhz(buf, gd->arch.tsec2_clk));
+ printf(" USB DR: %-4s MHz\n",
+ strmhz(buf, gd->arch.usbdr_clk));
#elif defined(CONFIG_MPC8309)
- printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
+ printf(" USB DR: %-4s MHz\n",
+ strmhz(buf, gd->arch.usbdr_clk));
#endif
#if defined(CONFIG_MPC834x)
- printf(" USB MPH: %-4s MHz\n", strmhz(buf, gd->usbmph_clk));
+ printf(" USB MPH: %-4s MHz\n",
+ strmhz(buf, gd->arch.usbmph_clk));
#endif
#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC837x)
- printf(" PCIEXP1: %-4s MHz\n", strmhz(buf, gd->pciexp1_clk));
- printf(" PCIEXP2: %-4s MHz\n", strmhz(buf, gd->pciexp2_clk));
+ printf(" PCIEXP1: %-4s MHz\n",
+ strmhz(buf, gd->arch.pciexp1_clk));
+ printf(" PCIEXP2: %-4s MHz\n",
+ strmhz(buf, gd->arch.pciexp2_clk));
#endif
#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- printf(" SATA: %-4s MHz\n", strmhz(buf, gd->sata_clk));
+ printf(" SATA: %-4s MHz\n",
+ strmhz(buf, gd->arch.sata_clk));
#endif
return 0;
}
/* Reclaim the DP memory for our use.
*/
- gd->dp_alloc_base = CPM_DATAONLY_BASE;
- gd->dp_alloc_top = gd->dp_alloc_base + CPM_DATAONLY_SIZE;
+ gd->arch.dp_alloc_base = CPM_DATAONLY_BASE;
+ gd->arch.dp_alloc_top = gd->arch.dp_alloc_base + CPM_DATAONLY_SIZE;
/*
* Reset CPM
uint savebase;
align_mask = align - 1;
- savebase = gd->dp_alloc_base;
+ savebase = gd->arch.dp_alloc_base;
- if ((off = (gd->dp_alloc_base & align_mask)) != 0)
- gd->dp_alloc_base += (align - off);
+ off = gd->arch.dp_alloc_base & align_mask;
+ if (off != 0)
+ gd->arch.dp_alloc_base += (align - off);
if ((off = size & align_mask) != 0)
size += align - off;
- if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) {
- gd->dp_alloc_base = savebase;
+ if ((gd->arch.dp_alloc_base + size) >= gd->arch.dp_alloc_top) {
+ gd->arch.dp_alloc_base = savebase;
panic("m8560_cpm_dpalloc: ran out of dual port ram!");
}
- retloc = gd->dp_alloc_base;
- gd->dp_alloc_base += size;
+ retloc = gd->arch.dp_alloc_base;
+ gd->arch.dp_alloc_base += size;
memset((void *)&(cpm->im_dprambase[retloc]), 0, size);
* Baud rate clocks are zero-based in the driver code (as that maps
* to port numbers). Documentation uses 1-based numbering.
*/
-#define BRG_INT_CLK gd->brg_clk
+#define BRG_INT_CLK gd->arch.brg_clk
#define BRG_UART_CLK ((BRG_INT_CLK + 15) / 16)
/* This function is used by UARTS, or anything else that uses a 16x
puts("CPU: ");
}
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
puts(cpu->name);
if (IS_E_PROCESSOR(svr))
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,pq3-localbus",
- "bus-frequency", gd->lbc_clk, 1);
+ "bus-frequency", gd->arch.lbc_clk, 1);
do_fixup_by_compat_u32(blob, "fsl,elbc",
- "bus-frequency", gd->lbc_clk, 1);
+ "bus-frequency", gd->arch.lbc_clk, 1);
#ifdef CONFIG_QE
ft_qe_setup(blob);
ft_fixup_qe_snum(blob);
gd->cpu_clk = sys_info.freqProcessor[0];
gd->bus_clk = sys_info.freqSystemBus;
gd->mem_clk = sys_info.freqDDRBus;
- gd->lbc_clk = sys_info.freqLocalBus;
+ gd->arch.lbc_clk = sys_info.freqLocalBus;
#ifdef CONFIG_QE
- gd->qe_clk = sys_info.freqQE;
- gd->brg_clk = gd->qe_clk / 2;
+ gd->arch.qe_clk = sys_info.freqQE;
+ gd->arch.brg_clk = gd->arch.qe_clk / 2;
#endif
/*
* The base clock for I2C depends on the actual SOC. Unfortunately,
*/
#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
- gd->i2c1_clk = sys_info.freqSystemBus;
+ gd->arch.i2c1_clk = sys_info.freqSystemBus;
#elif defined(CONFIG_MPC8544)
/*
* On the 8544, the I2C clock is the same as the SEC clock. This can be
* PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
*/
if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
- gd->i2c1_clk = sys_info.freqSystemBus / 3;
+ gd->arch.i2c1_clk = sys_info.freqSystemBus / 3;
else
- gd->i2c1_clk = sys_info.freqSystemBus / 2;
+ gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
#else
/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
- gd->i2c1_clk = sys_info.freqSystemBus / 2;
+ gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
#endif
- gd->i2c2_clk = gd->i2c1_clk;
+ gd->arch.i2c2_clk = gd->arch.i2c1_clk;
#if defined(CONFIG_FSL_ESDHC)
#if defined(CONFIG_MPC8569) || defined(CONFIG_P1010) ||\
defined(CONFIG_P1014)
- gd->sdhc_clk = gd->bus_clk;
+ gd->arch.sdhc_clk = gd->bus_clk;
#else
- gd->sdhc_clk = gd->bus_clk / 2;
+ gd->arch.sdhc_clk = gd->bus_clk / 2;
#endif
#endif /* defined(CONFIG_FSL_ESDHC) */
#if defined(CONFIG_CPM2)
- gd->vco_out = 2*sys_info.freqSystemBus;
- gd->cpm_clk = gd->vco_out / 2;
- gd->scc_clk = gd->vco_out / 4;
- gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
+ gd->arch.vco_out = 2*sys_info.freqSystemBus;
+ gd->arch.cpm_clk = gd->arch.vco_out / 2;
+ gd->arch.scc_clk = gd->arch.vco_out / 4;
+ gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1)));
#endif
if(gd->cpu_clk != 0) return (0);
int i = idx / 32;
int bit = idx % 32;
- gd->used_tlb_cams[i] |= (1 << bit);
+ gd->arch.used_tlb_cams[i] |= (1 << bit);
}
static inline void free_tlb_cam(u8 idx)
int i = idx / 32;
int bit = idx % 32;
- gd->used_tlb_cams[i] &= ~(1 << bit);
+ gd->arch.used_tlb_cams[i] &= ~(1 << bit);
}
void init_used_tlb_cams(void)
unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++)
- gd->used_tlb_cams[i] = 0;
+ gd->arch.used_tlb_cams[i] = 0;
/* walk all the entries */
for (i = 0; i < num_cam; i++) {
u32 idx;
for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++) {
- idx = ffz(gd->used_tlb_cams[i]);
+ idx = ffz(gd->arch.used_tlb_cams[i]);
if (idx != 32)
break;
}
puts("CPU: ");
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
puts(cpu->name);
#if defined(CONFIG_MPC8641)
do_fixup_by_compat_u32(blob, "fsl,mpc8641-localbus",
- "bus-frequency", gd->lbc_clk, 1);
+ "bus-frequency", gd->arch.lbc_clk, 1);
#endif
do_fixup_by_compat_u32(blob, "fsl,elbc",
- "bus-frequency", gd->lbc_clk, 1);
+ "bus-frequency", gd->arch.lbc_clk, 1);
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
get_sys_info(&sys_info);
gd->cpu_clk = sys_info.freqProcessor;
gd->bus_clk = sys_info.freqSystemBus;
- gd->lbc_clk = sys_info.freqLocalBus;
+ gd->arch.lbc_clk = sys_info.freqLocalBus;
/*
* The base clock for I2C depends on the actual SOC. Unfortunately,
* AN2919.
*/
#ifdef CONFIG_MPC8610
- gd->i2c1_clk = sys_info.freqSystemBus;
+ gd->arch.i2c1_clk = sys_info.freqSystemBus;
#else
- gd->i2c1_clk = sys_info.freqSystemBus / 2;
+ gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
#endif
- gd->i2c2_clk = gd->i2c1_clk;
+ gd->arch.i2c2_clk = gd->arch.i2c1_clk;
if (gd->cpu_clk != 0)
return 0;
int dpram_init (void)
{
/* Reclaim the DP memory for our use. */
- gd->dp_alloc_base = CPM_DATAONLY_BASE;
- gd->dp_alloc_top = CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE;
+ gd->arch.dp_alloc_base = CPM_DATAONLY_BASE;
+ gd->arch.dp_alloc_top = CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE;
return (0);
}
*/
uint dpram_alloc (uint size)
{
- uint addr = gd->dp_alloc_base;
+ uint addr = gd->arch.dp_alloc_base;
- if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top)
+ if ((gd->arch.dp_alloc_base + size) >= gd->arch.dp_alloc_top)
return (CPM_DP_NOSPACE);
- gd->dp_alloc_base += size;
+ gd->arch.dp_alloc_base += size;
return addr;
}
uint dpram_base (void)
{
- return gd->dp_alloc_base;
+ return gd->arch.dp_alloc_base;
}
/* Allocate some memory from the dual ported ram. We may want to
{
uint addr, mask = align - 1;
- addr = (gd->dp_alloc_base + mask) & ~mask;
+ addr = (gd->arch.dp_alloc_base + mask) & ~mask;
- if ((addr + size) >= gd->dp_alloc_top)
+ if ((addr + size) >= gd->arch.dp_alloc_top)
return (CPM_DP_NOSPACE);
- gd->dp_alloc_base = addr + size;
+ gd->arch.dp_alloc_base = addr + size;
return addr;
}
{
uint mask = align - 1;
- return (gd->dp_alloc_base + mask) & ~mask;
+ return (gd->arch.dp_alloc_base + mask) & ~mask;
}
#endif /* CONFIG_SYS_ALLOC_DPRAM */
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"clock-frequency", bd->bi_intfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,cpm-brg", "clock-frequency",
- gd->brg_clk, 1);
+ gd->arch.brg_clk, 1);
/* Fixup ethernet MAC addresses */
fdt_fixup_ethernet(blob);
divider = 64;
break;
}
- gd->brg_clk = gd->cpu_clk/divider;
+ gd->arch.brg_clk = gd->cpu_clk/divider;
}
#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
u32 cpu_mask(void)
{
ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR;
- struct cpu_type *cpu = gd->cpu;
+ struct cpu_type *cpu = gd->arch.cpu;
/* better to query feature reporting register than just assume 1 */
if (cpu == &cpu_type_unknown)
*/
int cpu_numcores(void)
{
- struct cpu_type *cpu = gd->cpu;
+ struct cpu_type *cpu = gd->arch.cpu;
/*
* Report # of cores in terms of the cpu_mask if we haven't
svr = get_svr();
ver = SVR_SOC_VER(svr);
- gd->cpu = identify_cpu(ver);
+ gd->arch.cpu = identify_cpu(ver);
return 0;
}
/* Once in memory, compute mask & # cores once and save them off */
int fixup_cpu(void)
{
- struct cpu_type *cpu = gd->cpu;
+ struct cpu_type *cpu = gd->arch.cpu;
if (cpu->num_cores == 0) {
cpu->mask = cpu_mask();
void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
{
- gd->used_laws |= (1 << idx);
+ gd->arch.used_laws |= (1 << idx);
out_be32(LAWAR_ADDR(idx), 0);
set_law_base_addr(idx, addr);
void disable_law(u8 idx)
{
- gd->used_laws &= ~(1 << idx);
+ gd->arch.used_laws &= ~(1 << idx);
out_be32(LAWAR_ADDR(idx), 0);
set_law_base_addr(idx, 0);
int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
{
- u32 idx = ffz(gd->used_laws);
+ u32 idx = ffz(gd->arch.used_laws);
if (idx >= FSL_HW_NUM_LAWS)
return -1;
u32 idx;
/* we have no LAWs free */
- if (gd->used_laws == -1)
+ if (gd->arch.used_laws == -1)
return -1;
/* grab the last free law */
- idx = __ilog2(~(gd->used_laws));
+ idx = __ilog2(~(gd->arch.used_laws));
if (idx >= FSL_HW_NUM_LAWS)
return -1;
int i;
#if FSL_HW_NUM_LAWS < 32
- gd->used_laws = ~((1 << FSL_HW_NUM_LAWS) - 1);
+ gd->arch.used_laws = ~((1 << FSL_HW_NUM_LAWS) - 1);
#elif FSL_HW_NUM_LAWS == 32
- gd->used_laws = 0;
+ gd->arch.used_laws = 0;
#else
#error FSL_HW_NUM_LAWS can not be greater than 32 w/o code changes
#endif
u32 lawar = in_be32(LAWAR_ADDR(i));
if (lawar & LAW_EN)
- gd->used_laws |= (1 << i);
+ gd->arch.used_laws |= (1 << i);
}
#if (defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)) || \
* the UART divisor is available
*/
#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- gd->uart_clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
+ gd->arch.uart_clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
#else
get_sys_info(&sys_info);
- gd->uart_clk = sys_info.freqUART / udiv;
+ gd->arch.uart_clk = sys_info.freqUART / udiv;
#endif
return clk;
/*
* Fixup all UART clocks for CPU internal UARTs
- * (only these UARTs are definitely clocked by gd->uart_clk)
+ * (only these UARTs are definitely clocked by gd->arch.uart_clk)
*
* These UARTs are direct childs of /plb/opb. This code
* does not touch any UARTs that are connected to the ebc.
(fdt_node_check_compatible(blob, off, "ns16550") == 0))
fdt_setprop(blob, off,
"clock-frequency",
- (void*)&(gd->uart_clk), 4);
+ (void *)&gd->arch.uart_clk, 4);
}
/*
#include "config.h"
#include "asm/types.h"
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long cpu_clk; /* CPU clock in Hz! */
- unsigned long bus_clk;
+/* Architecture-specific global data */
+struct arch_global_data {
+#if defined(CONFIG_FSL_ESDHC)
+ u32 sdhc_clk;
+#endif
#if defined(CONFIG_8xx)
- unsigned long brg_clk;
+ unsigned long brg_clk;
#endif
#if defined(CONFIG_CPM2)
/* There are many clocks on the MPC8260 - see page 9-5 */
- unsigned long vco_out;
- unsigned long cpm_clk;
- unsigned long scc_clk;
- unsigned long brg_clk;
-#ifdef CONFIG_PCI
- unsigned long pci_clk;
-#endif
+ unsigned long vco_out;
+ unsigned long cpm_clk;
+ unsigned long scc_clk;
+ unsigned long brg_clk;
#endif
- unsigned long mem_clk;
+ /* TODO: sjg@chromium.org: Should these be unslgned long? */
#if defined(CONFIG_MPC83xx)
/* There are other clocks in the MPC83XX */
u32 csb_clk;
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+# if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
-#elif defined(CONFIG_MPC8309)
+# elif defined(CONFIG_MPC8309)
u32 usbdr_clk;
-#endif
-#if defined (CONFIG_MPC834x)
+# endif
+# if defined(CONFIG_MPC834x)
u32 usbmph_clk;
-#endif /* CONFIG_MPC834x */
-#if defined(CONFIG_MPC8315)
+# endif /* CONFIG_MPC834x */
+# if defined(CONFIG_MPC8315)
u32 tdm_clk;
-#endif
+# endif
u32 core_clk;
u32 enc_clk;
u32 lbiu_clk;
u32 lclk_clk;
- u32 pci_clk;
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+# if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC837x)
u32 pciexp1_clk;
u32 pciexp2_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+# endif
+# if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
u32 sata_clk;
-#endif
-#if defined(CONFIG_MPC8360)
- u32 mem_sec_clk;
-#endif /* CONFIG_MPC8360 */
-#endif
-#if defined(CONFIG_FSL_ESDHC)
- u32 sdhc_clk;
+# endif
+# if defined(CONFIG_MPC8360)
+ u32 mem_sec_clk;
+# endif /* CONFIG_MPC8360 */
#endif
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
u32 lbc_clk;
void *cpu;
#endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */
-#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \
+ defined(CONFIG_MPC86xx)
u32 i2c1_clk;
u32 i2c2_clk;
#endif
u32 used_tlb_cams[(CONFIG_SYS_NUM_TLBCAMS+31)/32];
#endif
#if defined(CONFIG_MPC5xxx)
- unsigned long ipb_clk;
- unsigned long pci_clk;
+ unsigned long ipb_clk;
#endif
#if defined(CONFIG_MPC512X)
u32 ips_clk;
u32 csb_clk;
- u32 pci_clk;
#endif /* CONFIG_MPC512X */
#if defined(CONFIG_MPC8220)
- unsigned long bExtUart;
- unsigned long inp_clk;
- unsigned long pci_clk;
- unsigned long vco_clk;
- unsigned long pev_clk;
- unsigned long flb_clk;
-#endif
- phys_size_t ram_size; /* RAM size */
- unsigned long reset_status; /* reset status register at boot */
-#if defined(CONFIG_MPC83xx)
- unsigned long arbiter_event_attributes;
- unsigned long arbiter_event_address;
+ unsigned long inp_clk;
+ unsigned long vco_clk;
+ unsigned long pev_clk;
+ unsigned long flb_clk;
#endif
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid? */
- unsigned long have_console; /* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
- unsigned long precon_buf_idx; /* Pre-Console buffer index */
+ unsigned long reset_status; /* reset status register at boot */
+#if defined(CONFIG_MPC83xx)
+ unsigned long arbiter_event_attributes;
+ unsigned long arbiter_event_address;
#endif
#if defined(CONFIG_SYS_ALLOC_DPRAM) || defined(CONFIG_CPM2)
- unsigned int dp_alloc_base;
- unsigned int dp_alloc_top;
+ unsigned int dp_alloc_base;
+ unsigned int dp_alloc_top;
#endif
#if defined(CONFIG_4xx)
- u32 uart_clk;
+ u32 uart_clk;
#endif /* CONFIG_4xx */
#if defined(CONFIG_SYS_GT_6426x)
- unsigned int mirror_hack[16];
-#endif
-#if defined(CONFIG_A3000) || \
- defined(CONFIG_HIDDEN_DRAGON) || \
- defined(CONFIG_MUSENKI) || \
- defined(CONFIG_SANDPOINT)
- void * console_addr;
-#endif
- unsigned long relocaddr; /* Start address of U-Boot in RAM */
-#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
- unsigned long fb_base; /* Base address of framebuffer memory */
-#endif
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
- unsigned long post_log_word; /* Record POST activities */
- unsigned long post_log_res; /* success of POST test */
- unsigned long post_init_f_time; /* When post_init_f started */
-#endif
-#ifdef CONFIG_BOARD_TYPES
- unsigned long board_type;
-#endif
-#ifdef CONFIG_MODEM_SUPPORT
- unsigned long do_mdm_init;
- unsigned long be_quiet;
-#endif
-#if defined(CONFIG_LWMON) || defined(CONFIG_LWMON5)
- unsigned long kbd_status;
+ unsigned int mirror_hack[16];
#endif
#ifdef CONFIG_SYS_FPGA_COUNT
unsigned fpga_state[CONFIG_SYS_FPGA_COUNT];
#if defined(CONFIG_WD_MAX_RATE)
unsigned long long wdt_last; /* trace watch-dog triggering rate */
#endif
- void **jt; /* jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-} gd_t;
+#if defined(CONFIG_LWMON) || defined(CONFIG_LWMON5)
+ unsigned long kbd_status;
+#endif
+};
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
#if 1
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r2")
#endif
#if defined(CONFIG_MPC8220)
bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
- bd->bi_inpfreq = gd->inp_clk;
+ bd->bi_inpfreq = gd->arch.inp_clk;
bd->bi_pcifreq = gd->pci_clk;
- bd->bi_vcofreq = gd->vco_clk;
- bd->bi_pevfreq = gd->pev_clk;
- bd->bi_flbfreq = gd->flb_clk;
+ bd->bi_vcofreq = gd->arch.vco_clk;
+ bd->bi_pevfreq = gd->arch.pev_clk;
+ bd->bi_flbfreq = gd->arch.flb_clk;
/* store bootparam to sram (backward compatible), here? */
{
*sram++ = gd->ram_size;
*sram++ = gd->bus_clk;
- *sram++ = gd->inp_clk;
+ *sram++ = gd->arch.inp_clk;
*sram++ = gd->cpu_clk;
- *sram++ = gd->vco_clk;
- *sram++ = gd->flb_clk;
+ *sram++ = gd->arch.vco_clk;
+ *sram++ = gd->arch.flb_clk;
*sram++ = 0xb8c3ba11; /* boot signature */
}
#endif
bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
#if defined(CONFIG_CPM2)
- bd->bi_cpmfreq = gd->cpm_clk;
- bd->bi_brgfreq = gd->brg_clk;
- bd->bi_sccfreq = gd->scc_clk;
- bd->bi_vco = gd->vco_out;
+ bd->bi_cpmfreq = gd->arch.cpm_clk;
+ bd->bi_brgfreq = gd->arch.brg_clk;
+ bd->bi_sccfreq = gd->arch.scc_clk;
+ bd->bi_vco = gd->arch.vco_out;
#endif /* CONFIG_CPM2 */
#if defined(CONFIG_MPC512X)
- bd->bi_ipsfreq = gd->ips_clk;
+ bd->bi_ipsfreq = gd->arch.ips_clk;
#endif /* CONFIG_MPC512X */
#if defined(CONFIG_MPC5xxx)
- bd->bi_ipbfreq = gd->ipb_clk;
+ bd->bi_ipbfreq = gd->arch.ipb_clk;
bd->bi_pcifreq = gd->pci_clk;
#endif /* CONFIG_MPC5xxx */
bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
/*
- * The gd->cpu pointer is set to an address in flash before relocation.
- * We need to update it to point to the same CPU entry in RAM.
+ * The gd->arch.cpu pointer is set to an address in flash before
+ * relocation. We need to update it to point to the same CPU entry
+ * in RAM.
*/
- gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
+ gd->arch.cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
/*
* If we didn't know the cpu mask & # cores, we can save them of
void *map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
{
- return (void *)(gd->ram_buf + paddr);
+ return (void *)(gd->arch.ram_buf + paddr);
}
void flush_dcache_range(unsigned long start, unsigned long stop)
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long have_console; /* serial_init() was called */
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid? */
- unsigned long fb_base; /* base address of frame buffer */
+/* Architecture-specific global data */
+struct arch_global_data {
u8 *ram_buf; /* emulated RAM buffer */
- phys_size_t ram_size; /* RAM size */
- const void *fdt_blob; /* Our device tree, NULL if none */
- void **jt; /* jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-} gd_t;
+};
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
#define DECLARE_GLOBAL_DATA_PTR extern gd_t *gd
mem = os_malloc(CONFIG_SYS_SDRAM_SIZE);
assert(mem);
- gd->ram_buf = mem;
+ gd->arch.ram_buf = mem;
addr = (ulong)(mem + size);
/*
#endif
/* The Malloc area is at the top of simulated DRAM */
- mem_malloc_init((ulong)gd->ram_buf + gd->ram_size - TOTAL_MALLOC_LEN,
- TOTAL_MALLOC_LEN);
+ mem_malloc_init((ulong)gd->arch.ram_buf + gd->ram_size -
+ TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN);
/* initialize environment */
env_relocate();
#ifndef __ASM_SH_GLOBALDATA_H_
#define __ASM_SH_GLOBALDATA_H_
-typedef struct global_data
-{
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long cpu_clk; /* CPU clock in Hz! */
- unsigned long have_console; /* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
- unsigned long precon_buf_idx; /* Pre-Console buffer index */
-#endif
- phys_size_t ram_size; /* RAM size */
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid */
- void **jt; /* Standalone app jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("r13")
#include "asm/types.h"
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long cpu_clk; /* CPU clock in Hz! */
- unsigned long bus_clk;
-
- phys_size_t ram_size; /* RAM size */
- unsigned long reloc_off; /* Relocation Offset */
- unsigned long reset_status; /* reset status register at boot */
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid? */
- unsigned long have_console; /* serial_init() was called */
-
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
- unsigned long precon_buf_idx; /* Pre-Console buffer index */
-#endif
-#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
- unsigned long fb_base; /* Base address of framebuffer memory */
-#endif
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
- unsigned long post_log_word; /* Record POST activities */
- unsigned long post_log_res; /* success of POST test */
- unsigned long post_init_f_time; /* When post_init_f started */
-#endif
-#ifdef CONFIG_BOARD_TYPES
- unsigned long board_type;
-#endif
-#ifdef CONFIG_MODEM_SUPPORT
- unsigned long do_mdm_init;
- unsigned long be_quiet;
-#endif
-#ifdef CONFIG_LWMON
- unsigned long kbd_status;
-#endif
- void **jt; /* jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("%g7")
gdt_addr[X86_GDT_ENTRY_32BIT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff);
/* FS: data, read/write, 4 GB, base (Global Data Pointer) */
- gdt_addr[X86_GDT_ENTRY_32BIT_FS] = GDT_ENTRY(0xc093, (ulong)id, 0xfffff);
+ id->arch.gd_addr = id;
+ gdt_addr[X86_GDT_ENTRY_32BIT_FS] = GDT_ENTRY(0xc093,
+ (ulong)&id->arch.gd_addr, 0xfffff);
/* 16-bit CS: code, read/execute, 64 kB, base 0 */
gdt_addr[X86_GDT_ENTRY_16BIT_CS] = GDT_ENTRY(0x109b, 0, 0x0ffff);
/* Set second parameter to setup_gdt */
movl %esp, %edx
- /* gd->gd_addr = gd (Required to allow gd->xyz to work) */
- movl %eax, (%eax)
-
/* Setup global descriptor table so gd->xyz works */
call setup_gdt
/* Set second parameter to setup_gdt */
movl %esp, %edx
- /* gd->gd_addr = gd (Required to allow gd->xyz to work) */
- movl %eax, (%eax)
-
/* Setup global descriptor table so gd->xyz works */
call setup_gdt
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
#ifndef __ASSEMBLY__
-#include <asm/u-boot.h>
-
-typedef struct global_data gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+ struct global_data *gd_addr; /* Location of Global Data */
+};
-struct global_data {
- /* NOTE: gd_addr MUST be first member of struct global_data! */
- gd_t *gd_addr; /* Location of Global Data */
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long have_console; /* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
- unsigned long precon_buf_idx; /* Pre-Console buffer index */
#endif
- unsigned long reloc_off; /* Relocation Offset */
- unsigned long load_off; /* Load Offset */
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid? */
- unsigned long cpu_clk; /* CPU clock in Hz! */
- unsigned long bus_clk;
- unsigned long relocaddr; /* Start address of U-Boot in RAM */
- unsigned long start_addr_sp; /* start_addr_stackpointer */
- unsigned long gdt_addr; /* Location of GDT */
- phys_size_t ram_size; /* RAM size */
- unsigned long reset_status; /* reset status register at boot */
- const void *fdt_blob; /* Our device tree, NULL if none */
- void **jt; /* jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
-};
+#include <asm-generic/global_data.h>
+
+#ifndef __ASSEMBLY__
static inline gd_t *get_fs_gd_ptr(void)
{
gd_t *gd_ptr;
#endif
-#include <asm-generic/global_data_flags.h>
-
/*
* Our private Global Data Flags
*/
/* GT64240A errata: cant read MPSC/BRG registers... so make mirrors in ram for read/modify write */
-#define MIRROR_HACK ((struct _tag_mirror_hack *)&(gd->mirror_hack[0]))
+#define MIRROR_HACK ((struct _tag_mirror_hack *)&(gd->arch.mirror_hack[0]))
#define GT_REG_WRITE_MIRROR_G(a,d) {MIRROR_HACK->a ## _M = d; GT_REG_WRITE(a,d);}
#define GTREGREAD_MIRROR_G(a) (MIRROR_HACK->a ## _M)
{
char buf[64];
u8 sw;
- struct cpu_type *cpu = gd->cpu;
+ struct cpu_type *cpu = gd->arch.cpu;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
unsigned int i;
static const char *const freq[] = {"100", "125", "156.25", "161.13",
{
struct cpu_type *cpu;
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
printf("Board: %sRDB\n", cpu->name);
return 0;
struct cpu_type *cpu;
u8 sw;
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
printf("Board: %sQDS\n", cpu->name);
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x,\n",
int checkboard (void)
{
u8 sw;
- struct cpu_type *cpu = gd->cpu;
+ struct cpu_type *cpu = gd->arch.cpu;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
unsigned int i;
static const char * const freq[] = {"100", "125", "156.25", "212.5" };
struct cpu_type *cpu;
phys_size_t ddr_size;
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
/* P1014 and it's derivatives support max 16it DDR width */
if (cpu->soc_ver == SVR_P1014)
ddr_size = (CONFIG_SYS_DRAM_SIZE / 2);
panic("Unsupported DDR data rate %s MT/s data rate\n",
strmhz(buf, ddr_freq));
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
/* P1014 and it's derivatives support max 16bit DDR width */
if (cpu->soc_ver == SVR_P1014) {
ddr_cfg_regs.ddr_sdram_cfg &= ~SDRAM_CFG_DBW_MASK;
popts->trwt_override = 1;
popts->trwt = 0;
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
/* P1014 and it's derivatives support max 16it DDR width */
if (cpu->soc_ver == SVR_P1014)
popts->data_bus_width = DDR_DATA_BUS_WIDTH_16;
{
struct cpu_type *cpu;
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
printf("Board: %sRDB\n", cpu->name);
return 0;
struct cpu_type *cpu;
int num = 0;
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
#ifdef CONFIG_TSEC1
SET_STD_TSEC_INFO(tsec_info[num], 1);
phys_size_t size;
struct cpu_type *cpu;
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
ft_cpu_setup(blob, bd);
struct cpu_type *cpu;
ulong ddr_freq, ddr_freq_mhz;
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
/* P1020 and it's derivatives support max 32bit DDR width */
if (cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1011) {
ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2);
else
panic ("Unexpected Board REV %x detected!!\n", board_rev_gpio);
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev);
setbits_be32(&pgpio->gpdir, GPIO_DIR);
int checkboard(void)
{
u8 sw;
- struct cpu_type *cpu = gd->cpu;
+ struct cpu_type *cpu = gd->arch.cpu;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
unsigned int i;
{
char buf[64];
u8 sw;
- struct cpu_type *cpu = gd->cpu;
+ struct cpu_type *cpu = gd->arch.cpu;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
unsigned int i;
int get_fpga_state(unsigned dev)
{
- return gd->fpga_state[dev];
+ return gd->arch.fpga_state[dev];
}
void print_fpga_state(unsigned dev)
{
- if (gd->fpga_state[dev] & FPGA_STATE_DONE_FAILED)
+ if (gd->arch.fpga_state[dev] & FPGA_STATE_DONE_FAILED)
puts(" Waiting for FPGA-DONE timed out.\n");
- if (gd->fpga_state[dev] & FPGA_STATE_REFLECTION_FAILED)
+ if (gd->arch.fpga_state[dev] & FPGA_STATE_REFLECTION_FAILED)
puts(" FPGA reflection test failed.\n");
}
unsigned k;
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
- gd->fpga_state[k] = 0;
+ gd->arch.fpga_state[k] = 0;
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
unsigned ctr;
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
- gd->fpga_state[k] = 0;
+ gd->arch.fpga_state[k] = 0;
/*
* reset FPGA
while (!gd405ep_get_fpga_done(k)) {
udelay(100000);
if (ctr++ > 5) {
- gd->fpga_state[k] |= FPGA_STATE_DONE_FAILED;
+ gd->arch.fpga_state[k] |=
+ FPGA_STATE_DONE_FAILED;
break;
}
}
udelay(100000);
if (ctr++ > 5) {
- gd->fpga_state[k] |=
+ gd->arch.fpga_state[k] |=
FPGA_STATE_REFLECTION_FAILED;
break;
}
int get_fpga_state(unsigned dev)
{
- return gd->fpga_state[dev];
+ return gd->arch.fpga_state[dev];
}
void print_fpga_state(unsigned dev)
{
- if (gd->fpga_state[dev] & FPGA_STATE_DONE_FAILED)
+ if (gd->arch.fpga_state[dev] & FPGA_STATE_DONE_FAILED)
puts(" Waiting for FPGA-DONE timed out.\n");
- if (gd->fpga_state[dev] & FPGA_STATE_REFLECTION_FAILED)
+ if (gd->arch.fpga_state[dev] & FPGA_STATE_REFLECTION_FAILED)
puts(" FPGA reflection test failed.\n");
}
unsigned ctr;
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
- gd->fpga_state[k] = 0;
+ gd->arch.fpga_state[k] = 0;
/*
* reset FPGA
while (!gd405ex_get_fpga_done(k)) {
udelay(100000);
if (ctr++ > 5) {
- gd->fpga_state[k] |= FPGA_STATE_DONE_FAILED;
+ gd->arch.fpga_state[k] |=
+ FPGA_STATE_DONE_FAILED;
break;
}
}
udelay(100000);
if (ctr++ > 5) {
- gd->fpga_state[k] |=
+ gd->arch.fpga_state[k] |=
FPGA_STATE_REFLECTION_FAILED;
break;
}
if (i2c_probe(0x22)) { /* i2c_probe returns 0 on success */
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
- gd->fpga_state[k] |= FPGA_STATE_PLATFORM;
+ gd->arch.fpga_state[k] |= FPGA_STATE_PLATFORM;
} else {
pca9698_direction_output(0x22, 39, 1);
}
/* select clock sources */
out_be16(&psc->psc_clock_select, 0);
- baseclk = (gd->ipb_clk + 16) / 32;
+ baseclk = (gd->arch.ipb_clk + 16) / 32;
/* switch to UART mode */
out_be32(&psc->sicr, 0);
{
volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT);
- const u32 prescale = gd->ipb_clk / freq / 128;
+ const u32 prescale = gd->arch.ipb_clk / freq / 128;
const u32 count = 128;
const u32 width = 64;
freq = simple_strtol(argv[0], NULL, 0);
/* avoid zero prescale in buzzer_turn_on() */
- if (freq > gd->ipb_clk / 128) {
+ if (freq > gd->arch.ipb_clk / 128) {
printf("%dHz exceeds maximum (%ldHz)\n", freq,
- gd->ipb_clk / 128);
+ gd->arch.ipb_clk / 128);
} else if (!freq)
printf("Zero frequency is senseless\n");
else
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- gd->kbd_status = 0;
+ gd->arch.kbd_status = 0;
/* Forced by PIC. Delays <= 175us loose */
udelay(1000);
/* clear "irrelevant" bits. Recommended by Martin Rajek, LWN */
errcd &= ~(KEYBD_STATUS_H_RESET|KEYBD_STATUS_BROWNOUT);
if (errcd) {
- gd->kbd_status |= errcd << 8;
+ gd->arch.kbd_status |= errcd << 8;
}
/* Reset error code and verify */
val = KEYBD_CMD_RESET_ERRORS;
val &= KEYBD_STATUS_MASK; /* clear unused bits */
if (val) { /* permanent error, report it */
- gd->kbd_status |= val;
+ gd->arch.kbd_status |= val;
return;
}
{
uchar kbd_data[KEYBD_DATALEN];
char keybd_env[2 * KEYBD_DATALEN + 1];
- uchar kbd_init_status = gd->kbd_status >> 8;
- uchar kbd_status = gd->kbd_status;
+ uchar kbd_init_status = gd->arch.kbd_status >> 8;
+ uchar kbd_status = gd->arch.kbd_status;
uchar val;
char *str;
int i;
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- gd->kbd_status = 0;
+ gd->arch.kbd_status = 0;
/* Forced by PIC. Delays <= 175us loose */
udelay(1000);
/* clear "irrelevant" bits. Recommended by Martin Rajek, LWN */
errcd &= ~(KEYBD_STATUS_H_RESET|KEYBD_STATUS_BROWNOUT);
if (errcd) {
- gd->kbd_status |= errcd << 8;
+ gd->arch.kbd_status |= errcd << 8;
}
/* Reset error code and verify */
val = KEYBD_CMD_RESET_ERRORS;
val &= KEYBD_STATUS_MASK; /* clear unused bits */
if (val) { /* permanent error, report it */
- gd->kbd_status |= val;
+ gd->arch.kbd_status |= val;
return;
}
{
uchar kbd_data[KEYBD_DATALEN];
char keybd_env[2 * KEYBD_DATALEN + 1];
- uchar kbd_init_status = gd->kbd_status >> 8;
- uchar kbd_status = gd->kbd_status;
+ uchar kbd_init_status = gd->arch.kbd_status >> 8;
+ uchar kbd_status = gd->arch.kbd_status;
uchar val;
ushort data, inv_data;
char *str;
* Don't allow watch-dog triggering more frequently than
* the predefined value CONFIG_WD_MAX_RATE [ticks].
*/
- if (ct >= gd->wdt_last) {
- if ((ct - gd->wdt_last) < CONFIG_WD_MAX_RATE)
+ if (ct >= gd->arch.wdt_last) {
+ if ((ct - gd->arch.wdt_last) < CONFIG_WD_MAX_RATE)
return;
} else {
/* Time base counter had been reset */
- if (((unsigned long long)(-1) - gd->wdt_last + ct) <
+ if (((unsigned long long)(-1) - gd->arch.wdt_last + ct) <
CONFIG_WD_MAX_RATE)
return;
}
- gd->wdt_last = get_ticks();
+ gd->arch.wdt_last = get_ticks();
#endif
/*
* This is need for the external flash access
*/
lis r25,0x0800
- ori r25,r25,0x0280 /* 0000 1000 0xxx 0000 0000 0010 100x xxxx = 0x03800280
+ /* 0000 1000 0xxx 0000 0000 0010 100x xxxx = 0x03800280 */
+ ori r25,r25,0x0280
/*
* Second, create a fast timing:
* 90ns first cycle - 3 clock access
* This is used for the internal access
*/
lis r26,0x8900
- ori r26,r26,0x0280 /* 1000 1001 0xxx 0000 0000 0010 100x xxxx
+ /* 1000 1001 0xxx 0000 0000 0010 100x xxxx */
+ ori r26,r26,0x0280
/*
* We can't change settings on CS# if we currently use them.
* -> load a few instructions into cache and run this code from cache
+++ /dev/null
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
- *
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xbasic_types.c
-*
-* This file contains basic functions for Xilinx software IP.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -------------------------------------------------------
-* 1.00a rpm 11/07/03 Added XNullHandler function as a stub interrupt handler
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Variable Definitions *****************************/
-
-/**
- * This variable allows testing to be done easier with asserts. An assert
- * sets this variable such that a driver can evaluate this variable
- * to determine if an assert occurred.
- */
-unsigned int XAssertStatus;
-
-/**
- * This variable allows the assert functionality to be changed for testing
- * such that it does not wait infinitely. Use the debugger to disable the
- * waiting during testing of asserts.
- */
-u32 XWaitInAssert = TRUE;
-
-/* The callback function to be invoked when an assert is taken */
-static XAssertCallback XAssertCallbackRoutine = (XAssertCallback) NULL;
-
-/************************** Function Prototypes ******************************/
-
-/*****************************************************************************/
-/**
-*
-* Implements assert. Currently, it calls a user-defined callback function
-* if one has been set. Then, it potentially enters an infinite loop depending
-* on the value of the XWaitInAssert variable.
-*
-* @param File is the name of the filename of the source
-* @param Line is the linenumber within File
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XAssert(char *File, int Line)
-{
- /* if the callback has been set then invoke it */
- if (XAssertCallbackRoutine != NULL) {
- (*XAssertCallbackRoutine) (File, Line);
- }
-
- /* if specified, wait indefinitely such that the assert will show up
- * in testing
- */
- while (XWaitInAssert) {
- }
-}
-
-/*****************************************************************************/
-/**
-*
-* Sets up a callback function to be invoked when an assert occurs. If there
-* was already a callback installed, then it is replaced.
-*
-* @param Routine is the callback to be invoked when an assert is taken
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* This function has no effect if NDEBUG is set
-*
-******************************************************************************/
-void
-XAssertSetCallback(XAssertCallback Routine)
-{
- XAssertCallbackRoutine = Routine;
-}
-
-/*****************************************************************************/
-/**
-*
-* Null handler function. This follows the XInterruptHandler signature for
-* interrupt handlers. It can be used to assign a null handler (a stub) to an
-* interrupt controller vector table.
-*
-* @param NullParameter is an arbitrary void pointer and not used.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XNullHandler(void *NullParameter)
-{
-}
+++ /dev/null
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xbasic_types.h
-*
-* This file contains basic types for Xilinx software IP. These types do not
-* follow the standard naming convention with respect to using the component
-* name in front of each name because they are considered to be primitives.
-*
-* @note
-*
-* This file contains items which are architecture dependent.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -------------------------------------------------------
-* 1.00a rmm 12/14/01 First release
-* rmm 05/09/03 Added "xassert always" macros to rid ourselves of diab
-* compiler warnings
-* 1.00a rpm 11/07/03 Added XNullHandler function as a stub interrupt handler
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XBASIC_TYPES_H /* prevent circular inclusions */
-#define XBASIC_TYPES_H /* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-/************************** Constant Definitions *****************************/
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef NULL
-#define NULL 0
-#endif
-/** Null */
-
-#define XCOMPONENT_IS_READY 0x11111111 /* component has been initialized */
-#define XCOMPONENT_IS_STARTED 0x22222222 /* component has been started */
-
-/* the following constants and declarations are for unit test purposes and are
- * designed to be used in test applications.
- */
-#define XTEST_PASSED 0
-#define XTEST_FAILED 1
-
-#define XASSERT_NONE 0
-#define XASSERT_OCCURRED 1
-
-extern unsigned int XAssertStatus;
-extern void XAssert(char *, int);
-
-/**************************** Type Definitions *******************************/
-
-/** @name Primitive types
- * These primitive types are created for transportability.
- * They are dependent upon the target architecture.
- * @{
- */
-#include <linux/types.h>
-
-typedef struct {
- u32 Upper;
- u32 Lower;
-} Xuint64;
-
-/*@}*/
-
-/**
- * This data type defines an interrupt handler for a device.
- * The argument points to the instance of the component
- */
-typedef void (*XInterruptHandler) (void *InstancePtr);
-
-/**
- * This data type defines a callback to be invoked when an
- * assert occurs. The callback is invoked only when asserts are enabled
- */
-typedef void (*XAssertCallback) (char *FilenamePtr, int LineNumber);
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************/
-/**
-* Return the most significant half of the 64 bit data type.
-*
-* @param x is the 64 bit word.
-*
-* @return
-*
-* The upper 32 bits of the 64 bit word.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XUINT64_MSW(x) ((x).Upper)
-
-/*****************************************************************************/
-/**
-* Return the least significant half of the 64 bit data type.
-*
-* @param x is the 64 bit word.
-*
-* @return
-*
-* The lower 32 bits of the 64 bit word.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XUINT64_LSW(x) ((x).Lower)
-
-#ifndef NDEBUG
-
-/*****************************************************************************/
-/**
-* This assert macro is to be used for functions that do not return anything
-* (void). This in conjunction with the XWaitInAssert boolean can be used to
-* accomodate tests so that asserts which fail allow execution to continue.
-*
-* @param expression is the expression to evaluate. If it evaluates to false,
-* the assert occurs.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_VOID(expression) \
-{ \
- if (expression) { \
- XAssertStatus = XASSERT_NONE; \
- } else { \
- XAssert(__FILE__, __LINE__); \
- XAssertStatus = XASSERT_OCCURRED; \
- return; \
- } \
-}
-
-/*****************************************************************************/
-/**
-* This assert macro is to be used for functions that do return a value. This in
-* conjunction with the XWaitInAssert boolean can be used to accomodate tests so
-* that asserts which fail allow execution to continue.
-*
-* @param expression is the expression to evaluate. If it evaluates to false,
-* the assert occurs.
-*
-* @return
-*
-* Returns 0 unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_NONVOID(expression) \
-{ \
- if (expression) { \
- XAssertStatus = XASSERT_NONE; \
- } else { \
- XAssert(__FILE__, __LINE__); \
- XAssertStatus = XASSERT_OCCURRED; \
- return 0; \
- } \
-}
-
-/*****************************************************************************/
-/**
-* Always assert. This assert macro is to be used for functions that do not
-* return anything (void). Use for instances where an assert should always
-* occur.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_VOID_ALWAYS() \
-{ \
- XAssert(__FILE__, __LINE__); \
- XAssertStatus = XASSERT_OCCURRED; \
- return; \
-}
-
-/*****************************************************************************/
-/**
-* Always assert. This assert macro is to be used for functions that do return
-* a value. Use for instances where an assert should always occur.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_NONVOID_ALWAYS() \
-{ \
- XAssert(__FILE__, __LINE__); \
- XAssertStatus = XASSERT_OCCURRED; \
- return 0; \
-}
-
-#else
-
-#define XASSERT_VOID(expression)
-#define XASSERT_VOID_ALWAYS()
-#define XASSERT_NONVOID(expression)
-#define XASSERT_NONVOID_ALWAYS()
-#endif
-
-/************************** Function Prototypes ******************************/
-
-void XAssertSetCallback(XAssertCallback Routine);
-void XNullHandler(void *NullParameter);
-
-#endif /* end of protection macro */
+++ /dev/null
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xbuf_descriptor.h
-*
-* DESCRIPTION:
-*
-* This file contains the interface for the XBufDescriptor component.
-* The XBufDescriptor component is a passive component that only maps over
-* a buffer descriptor data structure shared by the scatter gather DMA hardware
-* and software. The component's primary purpose is to provide encapsulation of
-* the buffer descriptor processing. See the source file xbuf_descriptor.c for
-* details.
-*
-* NOTES:
-*
-* Most of the functions of this component are implemented as macros in order
-* to optimize the processing. The names are not all uppercase such that they
-* can be switched between macros and functions easily.
-*
-******************************************************************************/
-
-#ifndef XBUF_DESCRIPTOR_H /* prevent circular inclusions */
-#define XBUF_DESCRIPTOR_H /* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xdma_channel_i.h"
-
-/************************** Constant Definitions *****************************/
-
-/* The following constants allow access to all fields of a buffer descriptor
- * and are necessary at this level of visibility to allow macros to access
- * and modify the fields of a buffer descriptor. It is not expected that the
- * user of a buffer descriptor would need to use these constants.
- */
-
-#define XBD_DEVICE_STATUS_OFFSET 0
-#define XBD_CONTROL_OFFSET 1
-#define XBD_SOURCE_OFFSET 2
-#define XBD_DESTINATION_OFFSET 3
-#define XBD_LENGTH_OFFSET 4
-#define XBD_STATUS_OFFSET 5
-#define XBD_NEXT_PTR_OFFSET 6
-#define XBD_ID_OFFSET 7
-#define XBD_FLAGS_OFFSET 8
-#define XBD_RQSTED_LENGTH_OFFSET 9
-
-#define XBD_SIZE_IN_WORDS 10
-
-/*
- * The following constants define the bits of the flags field of a buffer
- * descriptor
- */
-
-#define XBD_FLAGS_LOCKED_MASK 1UL
-
-/**************************** Type Definitions *******************************/
-
-typedef u32 XBufDescriptor[XBD_SIZE_IN_WORDS];
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/* each of the following macros are named the same as functions rather than all
- * upper case in order to allow either the macros or the functions to be
- * used, see the source file xbuf_descriptor.c for documentation
- */
-
-#define XBufDescriptor_Initialize(InstancePtr) \
-{ \
- (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) = 0); \
- (*((u32 *)InstancePtr + XBD_SOURCE_OFFSET) = 0); \
- (*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET) = 0); \
- (*((u32 *)InstancePtr + XBD_LENGTH_OFFSET) = 0); \
- (*((u32 *)InstancePtr + XBD_STATUS_OFFSET) = 0); \
- (*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET) = 0); \
- (*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET) = 0); \
- (*((u32 *)InstancePtr + XBD_ID_OFFSET) = 0); \
- (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) = 0); \
- (*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) = 0); \
-}
-
-#define XBufDescriptor_GetControl(InstancePtr) \
- (u32)(*((u32 *)InstancePtr + XBD_CONTROL_OFFSET))
-
-#define XBufDescriptor_SetControl(InstancePtr, Control) \
- (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) = (u32)Control)
-
-#define XBufDescriptor_IsLastControl(InstancePtr) \
- (u32)(*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) & \
- XDC_CONTROL_LAST_BD_MASK)
-
-#define XBufDescriptor_SetLast(InstancePtr) \
- (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) |= XDC_CONTROL_LAST_BD_MASK)
-
-#define XBufDescriptor_GetSrcAddress(InstancePtr) \
- ((u32 *)(*((u32 *)InstancePtr + XBD_SOURCE_OFFSET)))
-
-#define XBufDescriptor_SetSrcAddress(InstancePtr, Source) \
- (*((u32 *)InstancePtr + XBD_SOURCE_OFFSET) = (u32)Source)
-
-#define XBufDescriptor_GetDestAddress(InstancePtr) \
- ((u32 *)(*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET)))
-
-#define XBufDescriptor_SetDestAddress(InstancePtr, Destination) \
- (*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET) = (u32)Destination)
-
-#define XBufDescriptor_GetLength(InstancePtr) \
- (u32)(*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) - \
- *((u32 *)InstancePtr + XBD_LENGTH_OFFSET))
-
-#define XBufDescriptor_SetLength(InstancePtr, Length) \
-{ \
- (*((u32 *)InstancePtr + XBD_LENGTH_OFFSET) = (u32)(Length)); \
- (*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) = (u32)(Length));\
-}
-
-#define XBufDescriptor_GetStatus(InstancePtr) \
- (u32)(*((u32 *)InstancePtr + XBD_STATUS_OFFSET))
-
-#define XBufDescriptor_SetStatus(InstancePtr, Status) \
- (*((u32 *)InstancePtr + XBD_STATUS_OFFSET) = (u32)Status)
-
-#define XBufDescriptor_IsLastStatus(InstancePtr) \
- (u32)(*((u32 *)InstancePtr + XBD_STATUS_OFFSET) & \
- XDC_STATUS_LAST_BD_MASK)
-
-#define XBufDescriptor_GetDeviceStatus(InstancePtr) \
- ((u32)(*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET)))
-
-#define XBufDescriptor_SetDeviceStatus(InstancePtr, Status) \
- (*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET) = (u32)Status)
-
-#define XBufDescriptor_GetNextPtr(InstancePtr) \
- (XBufDescriptor *)(*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET))
-
-#define XBufDescriptor_SetNextPtr(InstancePtr, NextPtr) \
- (*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET) = (u32)NextPtr)
-
-#define XBufDescriptor_GetId(InstancePtr) \
- (u32)(*((u32 *)InstancePtr + XBD_ID_OFFSET))
-
-#define XBufDescriptor_SetId(InstancePtr, Id) \
- (*((u32 *)InstancePtr + XBD_ID_OFFSET) = (u32)Id)
-
-#define XBufDescriptor_GetFlags(InstancePtr) \
- (u32)(*((u32 *)InstancePtr + XBD_FLAGS_OFFSET))
-
-#define XBufDescriptor_SetFlags(InstancePtr, Flags) \
- (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) = (u32)Flags)
-
-#define XBufDescriptor_Lock(InstancePtr) \
- (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) |= XBD_FLAGS_LOCKED_MASK)
-
-#define XBufDescriptor_Unlock(InstancePtr) \
- (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) &= ~XBD_FLAGS_LOCKED_MASK)
-
-#define XBufDescriptor_IsLocked(InstancePtr) \
- (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) & XBD_FLAGS_LOCKED_MASK)
-
-/************************** Function Prototypes ******************************/
-
-/* The following prototypes are provided to allow each of the functions to
- * be implemented as a function rather than a macro, and to provide the
- * syntax to allow users to understand how to call the macros, they are
- * commented out to prevent linker errors
- *
-
-u32 XBufDescriptor_Initialize(XBufDescriptor* InstancePtr);
-
-u32 XBufDescriptor_GetControl(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetControl(XBufDescriptor* InstancePtr, u32 Control);
-
-u32 XBufDescriptor_IsLastControl(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetLast(XBufDescriptor* InstancePtr);
-
-u32 XBufDescriptor_GetLength(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetLength(XBufDescriptor* InstancePtr, u32 Length);
-
-u32 XBufDescriptor_GetStatus(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetStatus(XBufDescriptor* InstancePtr, u32 Status);
-u32 XBufDescriptor_IsLastStatus(XBufDescriptor* InstancePtr);
-
-u32 XBufDescriptor_GetDeviceStatus(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetDeviceStatus(XBufDescriptor* InstancePtr,
- u32 Status);
-
-u32 XBufDescriptor_GetSrcAddress(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetSrcAddress(XBufDescriptor* InstancePtr,
- u32 SourceAddress);
-
-u32 XBufDescriptor_GetDestAddress(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetDestAddress(XBufDescriptor* InstancePtr,
- u32 DestinationAddress);
-
-XBufDescriptor* XBufDescriptor_GetNextPtr(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetNextPtr(XBufDescriptor* InstancePtr,
- XBufDescriptor* NextPtr);
-
-u32 XBufDescriptor_GetId(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetId(XBufDescriptor* InstancePtr, u32 Id);
-
-u32 XBufDescriptor_GetFlags(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetFlags(XBufDescriptor* InstancePtr, u32 Flags);
-
-void XBufDescriptor_Lock(XBufDescriptor* InstancePtr);
-void XBufDescriptor_Unlock(XBufDescriptor* InstancePtr);
-u32 XBufDescriptor_IsLocked(XBufDescriptor* InstancePtr);
-
-void XBufDescriptor_Copy(XBufDescriptor* InstancePtr,
- XBufDescriptor* DestinationPtr);
-
-*/
-
-#endif /* end of protection macro */
+++ /dev/null
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xdma_channel.c
-*
-* DESCRIPTION:
-*
-* This file contains the DMA channel component. This component supports
-* a distributed DMA design in which each device can have it's own dedicated
-* DMA channel, as opposed to a centralized DMA design. This component
-* performs processing for DMA on all devices.
-*
-* See xdma_channel.h for more information about this component.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xdma_channel.h"
-#include "xbasic_types.h"
-#include "xio.h"
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_Initialize
-*
-* DESCRIPTION:
-*
-* This function initializes a DMA channel. This function must be called
-* prior to using a DMA channel. Initialization of a channel includes setting
-* up the registers base address, and resetting the channel such that it's in a
-* known state. Interrupts for the channel are disabled when the channel is
-* reset.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* BaseAddress contains the base address of the registers for the DMA channel.
-*
-* RETURN VALUE:
-*
-* XST_SUCCESS indicating initialization was successful.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_Initialize(XDmaChannel * InstancePtr, u32 BaseAddress)
-{
- /* assert to verify input arguments, don't assert base address */
-
- XASSERT_NONVOID(InstancePtr != NULL);
-
- /* setup the base address of the registers for the DMA channel such
- * that register accesses can be done
- */
- InstancePtr->RegBaseAddress = BaseAddress;
-
- /* initialize the scatter gather list such that it indicates it has not
- * been created yet and the DMA channel is ready to use (initialized)
- */
- InstancePtr->GetPtr = NULL;
- InstancePtr->PutPtr = NULL;
- InstancePtr->CommitPtr = NULL;
- InstancePtr->LastPtr = NULL;
-
- InstancePtr->TotalDescriptorCount = 0;
- InstancePtr->ActiveDescriptorCount = 0;
- InstancePtr->IsReady = XCOMPONENT_IS_READY;
-
- /* initialize the version of the component
- */
- XVersion_FromString(&InstancePtr->Version, (s8 *)"1.00a");
-
- /* reset the DMA channel such that it's in a known state and ready
- * and indicate the initialization occured with no errors, note that
- * the is ready variable must be set before this call or reset will assert
- */
- XDmaChannel_Reset(InstancePtr);
-
- return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_IsReady
-*
-* DESCRIPTION:
-*
-* This function determines if a DMA channel component has been successfully
-* initialized such that it's ready to use.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* TRUE if the DMA channel component is ready, FALSE otherwise.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_IsReady(XDmaChannel * InstancePtr)
-{
- /* assert to verify input arguments used by the base component */
-
- XASSERT_NONVOID(InstancePtr != NULL);
-
- return InstancePtr->IsReady == XCOMPONENT_IS_READY;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetVersion
-*
-* DESCRIPTION:
-*
-* This function gets the software version for the specified DMA channel
-* component.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* A pointer to the software version of the specified DMA channel.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XVersion *
-XDmaChannel_GetVersion(XDmaChannel * InstancePtr)
-{
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* return a pointer to the version of the DMA channel */
-
- return &InstancePtr->Version;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SelfTest
-*
-* DESCRIPTION:
-*
-* This function performs a self test on the specified DMA channel. This self
-* test is destructive as the DMA channel is reset and a register default is
-* verified.
-*
-* ARGUMENTS:
-*
-* InstancePtr is a pointer to the DMA channel to be operated on.
-*
-* RETURN VALUE:
-*
-* XST_SUCCESS is returned if the self test is successful, or one of the
-* following errors.
-*
-* XST_DMA_RESET_REGISTER_ERROR Indicates the control register value
-* after a reset was not correct
-*
-* NOTES:
-*
-* This test does not performs a DMA transfer to test the channel because the
-* DMA hardware will not currently allow a non-local memory transfer to non-local
-* memory (memory copy), but only allows a non-local memory to or from the device
-* memory (typically a FIFO).
-*
-******************************************************************************/
-
-#define XDC_CONTROL_REG_RESET_MASK 0x98000000UL /* control reg reset value */
-
-XStatus
-XDmaChannel_SelfTest(XDmaChannel * InstancePtr)
-{
- u32 ControlReg;
-
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* reset the DMA channel such that it's in a known state before the test
- * it resets to no interrupts enabled, the desired state for the test
- */
- XDmaChannel_Reset(InstancePtr);
-
- /* this should be the first test to help prevent a lock up with the polling
- * loop that occurs later in the test, check the reset value of the DMA
- * control register to make sure it's correct, return with an error if not
- */
- ControlReg = XDmaChannel_GetControl(InstancePtr);
- if (ControlReg != XDC_CONTROL_REG_RESET_MASK) {
- return XST_DMA_RESET_REGISTER_ERROR;
- }
-
- return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_Reset
-*
-* DESCRIPTION:
-*
-* This function resets the DMA channel. This is a destructive operation such
-* that it should not be done while a channel is being used. If the DMA channel
-* is transferring data into other blocks, such as a FIFO, it may be necessary
-* to reset other blocks. This function does not modify the contents of a
-* scatter gather list for a DMA channel such that the user is responsible for
-* getting buffer descriptors from the list if necessary.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_Reset(XDmaChannel * InstancePtr)
-{
- /* assert to verify input arguments */
-
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* reset the DMA channel such that it's in a known state, the reset
- * register is self clearing such that it only has to be set
- */
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_RST_REG_OFFSET,
- XDC_RESET_MASK);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetControl
-*
-* DESCRIPTION:
-*
-* This function gets the control register contents of the DMA channel.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* The control register contents of the DMA channel. One or more of the
-* following values may be contained the register. Each of the values are
-* unique bit masks.
-*
-* XDC_DMACR_SOURCE_INCR_MASK Increment the source address
-* XDC_DMACR_DEST_INCR_MASK Increment the destination address
-* XDC_DMACR_SOURCE_LOCAL_MASK Local source address
-* XDC_DMACR_DEST_LOCAL_MASK Local destination address
-* XDC_DMACR_SG_ENABLE_MASK Scatter gather enable
-* XDC_DMACR_GEN_BD_INTR_MASK Individual buffer descriptor interrupt
-* XDC_DMACR_LAST_BD_MASK Last buffer descriptor in a packet
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetControl(XDmaChannel * InstancePtr)
-{
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* return the contents of the DMA control register */
-
- return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetControl
-*
-* DESCRIPTION:
-*
-* This function sets the control register of the specified DMA channel.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* Control contains the value to be written to the control register of the DMA
-* channel. One or more of the following values may be contained the register.
-* Each of the values are unique bit masks such that they may be ORed together
-* to enable multiple bits or inverted and ANDed to disable multiple bits.
-*
-* XDC_DMACR_SOURCE_INCR_MASK Increment the source address
-* XDC_DMACR_DEST_INCR_MASK Increment the destination address
-* XDC_DMACR_SOURCE_LOCAL_MASK Local source address
-* XDC_DMACR_DEST_LOCAL_MASK Local destination address
-* XDC_DMACR_SG_ENABLE_MASK Scatter gather enable
-* XDC_DMACR_GEN_BD_INTR_MASK Individual buffer descriptor interrupt
-* XDC_DMACR_LAST_BD_MASK Last buffer descriptor in a packet
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_SetControl(XDmaChannel * InstancePtr, u32 Control)
-{
- /* assert to verify input arguments except the control which can't be
- * asserted since all values are valid
- */
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* set the DMA control register to the specified value */
-
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET, Control);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetStatus
-*
-* DESCRIPTION:
-*
-* This function gets the status register contents of the DMA channel.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* The status register contents of the DMA channel. One or more of the
-* following values may be contained the register. Each of the values are
-* unique bit masks.
-*
-* XDC_DMASR_BUSY_MASK The DMA channel is busy
-* XDC_DMASR_BUS_ERROR_MASK A bus error occurred
-* XDC_DMASR_BUS_TIMEOUT_MASK A bus timeout occurred
-* XDC_DMASR_LAST_BD_MASK The last buffer descriptor of a packet
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetStatus(XDmaChannel * InstancePtr)
-{
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* return the contents of the DMA status register */
-
- return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAS_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetIntrStatus
-*
-* DESCRIPTION:
-*
-* This function sets the interrupt status register of the specified DMA channel.
-* Setting any bit of the interrupt status register will clear the bit to
-* indicate the interrupt processing has been completed. The definitions of each
-* bit in the register match the definition of the bits in the interrupt enable
-* register.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* Status contains the value to be written to the status register of the DMA
-* channel. One or more of the following values may be contained the register.
-* Each of the values are unique bit masks such that they may be ORed together
-* to enable multiple bits or inverted and ANDed to disable multiple bits.
-*
-* XDC_IXR_DMA_DONE_MASK The dma operation is done
-* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
-* XDC_IXR_PKT_DONE_MASK A packet is complete
-* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
-* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
-* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
-* XDC_IXR_BD_MASK A buffer descriptor is done
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status)
-{
- /* assert to verify input arguments except the status which can't be
- * asserted since all values are valid
- */
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* set the interrupt status register with the specified value such that
- * all bits which are set in the register are cleared effectively clearing
- * any active interrupts
- */
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET, Status);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetIntrStatus
-*
-* DESCRIPTION:
-*
-* This function gets the interrupt status register of the specified DMA channel.
-* The interrupt status register indicates which interrupts are active
-* for the DMA channel. If an interrupt is active, the status register must be
-* set (written) with the bit set for each interrupt which has been processed
-* in order to clear the interrupts. The definitions of each bit in the register
-* match the definition of the bits in the interrupt enable register.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* The interrupt status register contents of the specified DMA channel.
-* One or more of the following values may be contained the register.
-* Each of the values are unique bit masks.
-*
-* XDC_IXR_DMA_DONE_MASK The dma operation is done
-* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
-* XDC_IXR_PKT_DONE_MASK A packet is complete
-* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
-* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
-* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
-* XDC_IXR_SG_END_MASK Current descriptor was the end of the list
-* XDC_IXR_BD_MASK A buffer descriptor is done
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr)
-{
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* return the contents of the interrupt status register */
-
- return XIo_In32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetIntrEnable
-*
-* DESCRIPTION:
-*
-* This function sets the interrupt enable register of the specified DMA
-* channel. The interrupt enable register contains bits which enable
-* individual interrupts for the DMA channel. The definitions of each bit
-* in the register match the definition of the bits in the interrupt status
-* register.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* Enable contains the interrupt enable register contents to be written
-* in the DMA channel. One or more of the following values may be contained
-* the register. Each of the values are unique bit masks such that they may be
-* ORed together to enable multiple bits or inverted and ANDed to disable
-* multiple bits.
-*
-* XDC_IXR_DMA_DONE_MASK The dma operation is done
-* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
-* XDC_IXR_PKT_DONE_MASK A packet is complete
-* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
-* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
-* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
-* XDC_IXR_SG_END_MASK Current descriptor was the end of the list
-* XDC_IXR_BD_MASK A buffer descriptor is done
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable)
-{
- /* assert to verify input arguments except the enable which can't be
- * asserted since all values are valid
- */
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* set the interrupt enable register to the specified value */
-
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET, Enable);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetIntrEnable
-*
-* DESCRIPTION:
-*
-* This function gets the interrupt enable of the DMA channel. The
-* interrupt enable contains flags which enable individual interrupts for the
-* DMA channel. The definitions of each bit in the register match the definition
-* of the bits in the interrupt status register.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* The interrupt enable of the DMA channel. One or more of the following values
-* may be contained the register. Each of the values are unique bit masks.
-*
-* XDC_IXR_DMA_DONE_MASK The dma operation is done
-* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
-* XDC_IXR_PKT_DONE_MASK A packet is complete
-* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
-* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
-* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
-* XDC_IXR_BD_MASK A buffer descriptor is done
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetIntrEnable(XDmaChannel * InstancePtr)
-{
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* return the contents of the interrupt enable register */
-
- return XIo_In32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_Transfer
-*
-* DESCRIPTION:
-*
-* This function starts the DMA channel transferring data from a memory source
-* to a memory destination. This function only starts the operation and returns
-* before the operation may be complete. If the interrupt is enabled, an
-* interrupt will be generated when the operation is complete, otherwise it is
-* necessary to poll the channel status to determine when it's complete. It is
-* the responsibility of the caller to determine when the operation is complete
-* by handling the generated interrupt or polling the status. It is also the
-* responsibility of the caller to ensure that the DMA channel is not busy with
-* another transfer before calling this function.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* SourcePtr contains a pointer to the source memory where the data is to
-* be tranferred from and must be 32 bit aligned.
-*
-* DestinationPtr contains a pointer to the destination memory where the data
-* is to be transferred and must be 32 bit aligned.
-*
-* ByteCount contains the number of bytes to transfer during the DMA operation.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* The DMA h/w will not currently allow a non-local memory transfer to non-local
-* memory (memory copy), but only allows a non-local memory to or from the device
-* memory (typically a FIFO).
-*
-* It is the responsibility of the caller to ensure that the cache is
-* flushed and invalidated both before and after the DMA operation completes
-* if the memory pointed to is cached. The caller must also ensure that the
-* pointers contain a physical address rather than a virtual address
-* if address translation is being used.
-*
-******************************************************************************/
-void
-XDmaChannel_Transfer(XDmaChannel * InstancePtr,
- u32 * SourcePtr, u32 * DestinationPtr, u32 ByteCount)
-{
- /* assert to verify input arguments and the alignment of any arguments
- * which have expected alignments
- */
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(SourcePtr != NULL);
- XASSERT_VOID(((u32) SourcePtr & 3) == 0);
- XASSERT_VOID(DestinationPtr != NULL);
- XASSERT_VOID(((u32) DestinationPtr & 3) == 0);
- XASSERT_VOID(ByteCount != 0);
- XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* setup the source and destination address registers for the transfer */
-
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_SA_REG_OFFSET,
- (u32) SourcePtr);
-
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_DA_REG_OFFSET,
- (u32) DestinationPtr);
-
- /* start the DMA transfer to copy from the source buffer to the
- * destination buffer by writing the length to the length register
- */
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_LEN_REG_OFFSET, ByteCount);
-}
+++ /dev/null
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xdma_channel.h
-*
-* DESCRIPTION:
-*
-* This file contains the DMA channel component implementation. This component
-* supports a distributed DMA design in which each device can have it's own
-* dedicated DMA channel, as opposed to a centralized DMA design.
-* A device which uses DMA typically contains two DMA channels, one for
-* sending data and the other for receiving data.
-*
-* This component is designed to be used as a basic building block for
-* designing a device driver. It provides registers accesses such that all
-* DMA processing can be maintained easier, but the device driver designer
-* must still understand all the details of the DMA channel.
-*
-* The DMA channel allows a CPU to minimize the CPU interaction required to move
-* data between a memory and a device. The CPU requests the DMA channel to
-* perform a DMA operation and typically continues performing other processing
-* until the DMA operation completes. DMA could be considered a primitive form
-* of multiprocessing such that caching and address translation can be an issue.
-*
-* Scatter Gather Operations
-*
-* The DMA channel may support scatter gather operations. A scatter gather
-* operation automates the DMA channel such that multiple buffers can be
-* sent or received with minimal software interaction with the hardware. Buffer
-* descriptors, contained in the XBufDescriptor component, are used by the
-* scatter gather operations of the DMA channel to describe the buffers to be
-* processed.
-*
-* Scatter Gather List Operations
-*
-* A scatter gather list may be supported by each DMA channel. The scatter
-* gather list allows buffer descriptors to be put into the list by a device
-* driver which requires scatter gather. The hardware processes the buffer
-* descriptors which are contained in the list and modifies the buffer
-* descriptors to reflect the status of the DMA operations. The device driver
-* is notified by interrupt that specific DMA events occur including scatter
-* gather events. The device driver removes the completed buffer descriptors
-* from the scatter gather list to evaluate the status of each DMA operation.
-*
-* The scatter gather list is created and buffer descriptors are inserted into
-* the list. Buffer descriptors are never removed from the list after it's
-* creation such that a put operation copies from a temporary buffer descriptor
-* to a buffer descriptor in the list. Get operations don't copy from the list
-* to a temporary, but return a pointer to the buffer descriptor in the list.
-* A buffer descriptor in the list may be locked to prevent it from being
-* overwritten by a put operation. This allows the device driver to get a
-* descriptor from a scatter gather list and prevent it from being overwritten
-* until the buffer associated with the buffer descriptor has been processed.
-*
-* Typical Scatter Gather Processing
-*
-* The following steps illustrate the typical processing to use the
-* scatter gather features of a DMA channel.
-*
-* 1. Create a scatter gather list for the DMA channel which puts empty buffer
-* descriptors into the list.
-* 2. Create buffer descriptors which describe the buffers to be filled with
-* receive data or the buffers which contain data to be sent.
-* 3. Put buffer descriptors into the DMA channel scatter list such that scatter
-* gather operations are requested.
-* 4. Commit the buffer descriptors in the list such that they are ready to be
-* used by the DMA channel hardware.
-* 5. Start the scatter gather operations of the DMA channel.
-* 6. Process any interrupts which occur as a result of the scatter gather
-* operations or poll the DMA channel to determine the status.
-*
-* Interrupts
-*
-* Each DMA channel has the ability to generate an interrupt. This component
-* does not perform processing for the interrupt as this processing is typically
-* tightly coupled with the device which is using the DMA channel. It is the
-* responsibility of the caller of DMA functions to manage the interrupt
-* including connecting to the interrupt and enabling/disabling the interrupt.
-*
-* Critical Sections
-*
-* It is the responsibility of the device driver designer to use critical
-* sections as necessary when calling functions of the DMA channel. This
-* component does not use critical sections and it does access registers using
-* read-modify-write operations. Calls to DMA functions from a main thread
-* and from an interrupt context could produce unpredictable behavior such that
-* the caller must provide the appropriate critical sections.
-*
-* Address Translation
-*
-* All addresses of data structures which are passed to DMA functions must
-* be physical (real) addresses as opposed to logical (virtual) addresses.
-*
-* Caching
-*
-* The memory which is passed to the function which creates the scatter gather
-* list must not be cached such that buffer descriptors are non-cached. This
-* is necessary because the buffer descriptors are kept in a ring buffer and
-* not directly accessible to the caller of DMA functions.
-*
-* The caller of DMA functions is responsible for ensuring that any data
-* buffers which are passed to the DMA channel are cache-line aligned if
-* necessary.
-*
-* The caller of DMA functions is responsible for ensuring that any data
-* buffers which are passed to the DMA channel have been flushed from the cache.
-*
-* The caller of DMA functions is responsible for ensuring that the cache is
-* invalidated prior to using any data buffers which are the result of a DMA
-* operation.
-*
-* Memory Alignment
-*
-* The addresses of data buffers which are passed to DMA functions must be
-* 32 bit word aligned since the DMA hardware performs 32 bit word transfers.
-*
-* Mutual Exclusion
-*
-* The functions of the DMA channel are not thread safe such that the caller
-* of all DMA functions is responsible for ensuring mutual exclusion for a
-* DMA channel. Mutual exclusion across multiple DMA channels is not
-* necessary.
-*
-* NOTES:
-*
-* Many of the provided functions which are register accessors don't provide
-* a lot of error detection. The caller is expected to understand the impact
-* of a function call based upon the current state of the DMA channel. This
-* is done to minimize the overhead in this component.
-*
-******************************************************************************/
-
-#ifndef XDMA_CHANNEL_H /* prevent circular inclusions */
-#define XDMA_CHANNEL_H /* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xdma_channel_i.h" /* constants shared with buffer descriptor */
-#include "xbasic_types.h"
-#include "xstatus.h"
-#include "xversion.h"
-#include "xbuf_descriptor.h"
-
-/************************** Constant Definitions *****************************/
-
-/* the following constants provide access to the bit fields of the DMA control
- * register (DMACR)
- */
-#define XDC_DMACR_SOURCE_INCR_MASK 0x80000000UL /* increment source address */
-#define XDC_DMACR_DEST_INCR_MASK 0x40000000UL /* increment dest address */
-#define XDC_DMACR_SOURCE_LOCAL_MASK 0x20000000UL /* local source address */
-#define XDC_DMACR_DEST_LOCAL_MASK 0x10000000UL /* local dest address */
-#define XDC_DMACR_SG_DISABLE_MASK 0x08000000UL /* scatter gather disable */
-#define XDC_DMACR_GEN_BD_INTR_MASK 0x04000000UL /* descriptor interrupt */
-#define XDC_DMACR_LAST_BD_MASK XDC_CONTROL_LAST_BD_MASK /* last buffer */
- /* descriptor */
-
-/* the following constants provide access to the bit fields of the DMA status
- * register (DMASR)
- */
-#define XDC_DMASR_BUSY_MASK 0x80000000UL /* channel is busy */
-#define XDC_DMASR_BUS_ERROR_MASK 0x40000000UL /* bus error occurred */
-#define XDC_DMASR_BUS_TIMEOUT_MASK 0x20000000UL /* bus timeout occurred */
-#define XDC_DMASR_LAST_BD_MASK XDC_STATUS_LAST_BD_MASK /* last buffer */
- /* descriptor */
-#define XDC_DMASR_SG_BUSY_MASK 0x08000000UL /* scatter gather is busy */
-
-/* the following constants provide access to the bit fields of the interrupt
- * status register (ISR) and the interrupt enable register (IER), bit masks
- * match for both registers such that they are named IXR
- */
-#define XDC_IXR_DMA_DONE_MASK 0x1UL /* dma operation done */
-#define XDC_IXR_DMA_ERROR_MASK 0x2UL /* dma operation error */
-#define XDC_IXR_PKT_DONE_MASK 0x4UL /* packet done */
-#define XDC_IXR_PKT_THRESHOLD_MASK 0x8UL /* packet count threshold */
-#define XDC_IXR_PKT_WAIT_BOUND_MASK 0x10UL /* packet wait bound reached */
-#define XDC_IXR_SG_DISABLE_ACK_MASK 0x20UL /* scatter gather disable
- acknowledge occurred */
-#define XDC_IXR_SG_END_MASK 0x40UL /* last buffer descriptor
- disabled scatter gather */
-#define XDC_IXR_BD_MASK 0x80UL /* buffer descriptor done */
-
-/**************************** Type Definitions *******************************/
-
-/*
- * the following structure contains data which is on a per instance basis
- * for the XDmaChannel component
- */
-typedef struct XDmaChannelTag {
- XVersion Version; /* version of the driver */
- u32 RegBaseAddress; /* base address of registers */
- u32 IsReady; /* device is initialized and ready */
-
- XBufDescriptor *PutPtr; /* keep track of where to put into list */
- XBufDescriptor *GetPtr; /* keep track of where to get from list */
- XBufDescriptor *CommitPtr; /* keep track of where to commit in list */
- XBufDescriptor *LastPtr; /* keep track of the last put in the list */
- u32 TotalDescriptorCount; /* total # of descriptors in the list */
- u32 ActiveDescriptorCount; /* # of descriptors pointing to buffers
- * in the buffer descriptor list */
-} XDmaChannel;
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-XStatus XDmaChannel_Initialize(XDmaChannel * InstancePtr, u32 BaseAddress);
-u32 XDmaChannel_IsReady(XDmaChannel * InstancePtr);
-XVersion *XDmaChannel_GetVersion(XDmaChannel * InstancePtr);
-XStatus XDmaChannel_SelfTest(XDmaChannel * InstancePtr);
-void XDmaChannel_Reset(XDmaChannel * InstancePtr);
-
-/* Control functions */
-
-u32 XDmaChannel_GetControl(XDmaChannel * InstancePtr);
-void XDmaChannel_SetControl(XDmaChannel * InstancePtr, u32 Control);
-
-/* Status functions */
-
-u32 XDmaChannel_GetStatus(XDmaChannel * InstancePtr);
-void XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status);
-u32 XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr);
-void XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable);
-u32 XDmaChannel_GetIntrEnable(XDmaChannel * InstancePtr);
-
-/* DMA without scatter gather functions */
-
-void XDmaChannel_Transfer(XDmaChannel * InstancePtr,
- u32 * SourcePtr, u32 * DestinationPtr, u32 ByteCount);
-
-/* Scatter gather functions */
-
-XStatus XDmaChannel_SgStart(XDmaChannel * InstancePtr);
-XStatus XDmaChannel_SgStop(XDmaChannel * InstancePtr,
- XBufDescriptor ** BufDescriptorPtr);
-XStatus XDmaChannel_CreateSgList(XDmaChannel * InstancePtr,
- u32 * MemoryPtr, u32 ByteCount);
-u32 XDmaChannel_IsSgListEmpty(XDmaChannel * InstancePtr);
-
-XStatus XDmaChannel_PutDescriptor(XDmaChannel * InstancePtr,
- XBufDescriptor * BufDescriptorPtr);
-XStatus XDmaChannel_CommitPuts(XDmaChannel * InstancePtr);
-XStatus XDmaChannel_GetDescriptor(XDmaChannel * InstancePtr,
- XBufDescriptor ** BufDescriptorPtr);
-
-/* Packet functions for interrupt collescing */
-
-u32 XDmaChannel_GetPktCount(XDmaChannel * InstancePtr);
-void XDmaChannel_DecrementPktCount(XDmaChannel * InstancePtr);
-XStatus XDmaChannel_SetPktThreshold(XDmaChannel * InstancePtr, u8 Threshold);
-u8 XDmaChannel_GetPktThreshold(XDmaChannel * InstancePtr);
-void XDmaChannel_SetPktWaitBound(XDmaChannel * InstancePtr, u32 WaitBound);
-u32 XDmaChannel_GetPktWaitBound(XDmaChannel * InstancePtr);
-
-#endif /* end of protection macro */
+++ /dev/null
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xdma_channel_i.h
-*
-* DESCRIPTION:
-*
-* This file contains data which is shared internal data for the DMA channel
-* component. It is also shared with the buffer descriptor component which is
-* very tightly coupled with the DMA channel component.
-*
-* NOTES:
-*
-* The last buffer descriptor constants must be located here to prevent a
-* circular dependency between the DMA channel component and the buffer
-* descriptor component.
-*
-******************************************************************************/
-
-#ifndef XDMA_CHANNEL_I_H /* prevent circular inclusions */
-#define XDMA_CHANNEL_I_H /* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xstatus.h"
-#include "xversion.h"
-
-/************************** Constant Definitions *****************************/
-
-#define XDC_DMA_CHANNEL_V1_00_A "1.00a"
-
-/* the following constant provides access to the bit fields of the DMA control
- * register (DMACR) which must be shared between the DMA channel component
- * and the buffer descriptor component
- */
-#define XDC_CONTROL_LAST_BD_MASK 0x02000000UL /* last buffer descriptor */
-
-/* the following constant provides access to the bit fields of the DMA status
- * register (DMASR) which must be shared between the DMA channel component
- * and the buffer descriptor component
- */
-#define XDC_STATUS_LAST_BD_MASK 0x10000000UL /* last buffer descriptor */
-
-/* the following constants provide access to each of the registers of a DMA
- * channel
- */
-#define XDC_RST_REG_OFFSET 0 /* reset register */
-#define XDC_MI_REG_OFFSET 0 /* module information register */
-#define XDC_DMAC_REG_OFFSET 4 /* DMA control register */
-#define XDC_SA_REG_OFFSET 8 /* source address register */
-#define XDC_DA_REG_OFFSET 12 /* destination address register */
-#define XDC_LEN_REG_OFFSET 16 /* length register */
-#define XDC_DMAS_REG_OFFSET 20 /* DMA status register */
-#define XDC_BDA_REG_OFFSET 24 /* buffer descriptor address register */
-#define XDC_SWCR_REG_OFFSET 28 /* software control register */
-#define XDC_UPC_REG_OFFSET 32 /* unserviced packet count register */
-#define XDC_PCT_REG_OFFSET 36 /* packet count threshold register */
-#define XDC_PWB_REG_OFFSET 40 /* packet wait bound register */
-#define XDC_IS_REG_OFFSET 44 /* interrupt status register */
-#define XDC_IE_REG_OFFSET 48 /* interrupt enable register */
-
-/* the following constant is written to the reset register to reset the
- * DMA channel
- */
-#define XDC_RESET_MASK 0x0000000AUL
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-#endif /* end of protection macro */
+++ /dev/null
-/* $Id: xdma_channel_sg.c,v 1.6 2003/02/03 19:50:33 moleres Exp $ */
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xdma_channel_sg.c
-*
-* DESCRIPTION:
-*
-* This file contains the implementation of the XDmaChannel component which is
-* related to scatter gather operations.
-*
-* Scatter Gather Operations
-*
-* The DMA channel may support scatter gather operations. A scatter gather
-* operation automates the DMA channel such that multiple buffers can be
-* sent or received with minimal software interaction with the hardware. Buffer
-* descriptors, contained in the XBufDescriptor component, are used by the
-* scatter gather operations of the DMA channel to describe the buffers to be
-* processed.
-*
-* Scatter Gather List Operations
-*
-* A scatter gather list may be supported by each DMA channel. The scatter
-* gather list allows buffer descriptors to be put into the list by a device
-* driver which requires scatter gather. The hardware processes the buffer
-* descriptors which are contained in the list and modifies the buffer
-* descriptors to reflect the status of the DMA operations. The device driver
-* is notified by interrupt that specific DMA events occur including scatter
-* gather events. The device driver removes the completed buffer descriptors
-* from the scatter gather list to evaluate the status of each DMA operation.
-*
-* The scatter gather list is created and buffer descriptors are inserted into
-* the list. Buffer descriptors are never removed from the list after it's
-* creation such that a put operation copies from a temporary buffer descriptor
-* to a buffer descriptor in the list. Get operations don't copy from the list
-* to a temporary, but return a pointer to the buffer descriptor in the list.
-* A buffer descriptor in the list may be locked to prevent it from being
-* overwritten by a put operation. This allows the device driver to get a
-* descriptor from a scatter gather list and prevent it from being overwritten
-* until the buffer associated with the buffer descriptor has been processed.
-*
-* The get and put functions only operate on the list and are asynchronous from
-* the hardware which may be using the list of descriptors. This is important
-* because there are no checks in the get and put functions to ensure that the
-* hardware has processed the descriptors. This must be handled by the driver
-* using the DMA scatter gather channel through the use of the other functions.
-* When a scatter gather operation is started, the start function does ensure
-* that the descriptor to start has not already been processed by the hardware
-* and is not the first of a series of descriptors that have not been committed
-* yet.
-*
-* Descriptors are put into the list but not marked as ready to use by the
-* hardware until a commit operation is done. This allows multiple descriptors
-* which may contain a single packet of information for a protocol to be
-* guaranteed not to cause any underflow conditions during transmission. The
-* hardware design only allows descriptors to cause it to stop after a descriptor
-* has been processed rather than before it is processed. A series of
-* descriptors are put into the list followed by a commit operation, or each
-* descriptor may be commited. A commit operation is performed by changing a
-* single descriptor, the first of the series of puts, to indicate that the
-* hardware may now use all descriptors after it. The last descriptor in the
-* list is always set to cause the hardware to stop after it is processed.
-*
-* Typical Scatter Gather Processing
-*
-* The following steps illustrate the typical processing to use the
-* scatter gather features of a DMA channel.
-*
-* 1. Create a scatter gather list for the DMA channel which puts empty buffer
-* descriptors into the list.
-* 2. Create buffer descriptors which describe the buffers to be filled with
-* receive data or the buffers which contain data to be sent.
-* 3. Put buffer descriptors into the DMA channel scatter list such that scatter
-* gather operations are requested.
-* 4. Commit the buffer descriptors in the list such that they are ready to be
-* used by the DMA channel hardware.
-* 5. Start the scatter gather operations of the DMA channel.
-* 6. Process any interrupts which occur as a result of the scatter gather
-* operations or poll the DMA channel to determine the status. This may
-* be accomplished by getting the packet count for the channel and then
-* getting the appropriate number of descriptors from the list for that
-* number of packets.
-*
-* Minimizing Interrupts
-*
-* The Scatter Gather operating mode is designed to reduce the amount of CPU
-* throughput necessary to manage the hardware for devices. A key to the CPU
-* throughput is the number and rate of interrupts that the CPU must service.
-* Devices with higher data rates can cause larger numbers of interrupts and
-* higher frequency interrupts. Ideally the number of interrupts can be reduced
-* by only generating an interrupt when a specific amount of data has been
-* received from the interface. This design suffers from a lack of interrupts
-* when the amount of data received is less than the specified amount of data
-* to generate an interrupt. In order to help minimize the number of interrupts
-* which the CPU must service, an algorithm referred to as "interrupt coalescing"
-* is utilized.
-*
-* Interrupt Coalescing
-*
-* The principle of interrupt coalescing is to wait before generating an
-* interrupt until a certain number of packets have been received or sent. An
-* interrupt is also generated if a smaller number of packets have been received
-* followed by a certain period of time with no packet reception. This is a
-* trade-off of latency for bandwidth and is accomplished using several
-* mechanisms of the hardware including a counter for packets received or
-* transmitted and a packet timer. These two hardware mechanisms work in
-* combination to allow a reduction in the number of interrupts processed by the
-* CPU for packet reception.
-*
-* Unserviced Packet Count
-*
-* The purpose of the packet counter is to count the number of packets received
-* or transmitted and provide an interrupt when a specific number of packets
-* have been processed by the hardware. An interrupt is generated whenever the
-* counter is greater than or equal to the Packet Count Threshold. This counter
-* contains an accurate count of the number of packets that the hardware has
-* processed, either received or transmitted, and the software has not serviced.
-*
-* The packet counter allows the number of interrupts to be reduced by waiting
-* to generate an interrupt until enough packets are received. For packet
-* reception, packet counts of less than the number to generate an interrupt
-* would not be serviced without the addition of a packet timer. This counter is
-* continuously updated by the hardware, not latched to the value at the time
-* the interrupt occurred.
-*
-* The packet counter can be used within the interrupt service routine for the
-* device to reduce the number of interrupts. The interrupt service routine
-* loops while performing processing for each packet which has been received or
-* transmitted and decrements the counter by a specified value. At the same time,
-* the hardware is possibly continuing to receive or transmit more packets such
-* that the software may choose, based upon the value in the packet counter, to
-* remain in the interrupt service routine rather than exiting and immediately
-* returning. This feature should be used with caution as reducing the number of
-* interrupts is beneficial, but unbounded interrupt processing is not desirable.
-*
-* Since the hardware may be incrementing the packet counter simultaneously
-* with the software decrementing the counter, there is a need for atomic
-* operations. The hardware ensures that the operation is atomic such that
-* simultaneous accesses are properly handled.
-*
-* Packet Wait Bound
-*
-* The purpose of the packet wait bound is to augment the unserviced packet
-* count. Whenever there is no pending interrupt for the channel and the
-* unserviced packet count is non-zero, a timer starts counting timeout at the
-* value contained the the packet wait bound register. If the timeout is
-* reached, an interrupt is generated such that the software may service the
-* data which was buffered.
-*
-* NOTES:
-*
-* Special Test Conditions:
-*
-* The scatter gather list processing must be thoroughly tested if changes are
-* made. Testing should include putting and committing single descriptors and
-* putting multiple descriptors followed by a single commit. There are some
-* conditions in the code which handle the exception conditions.
-*
-* The Put Pointer points to the next location in the descriptor list to copy
-* in a new descriptor. The Get Pointer points to the next location in the
-* list to get a descriptor from. The Get Pointer only allows software to
-* have a traverse the list after the hardware has finished processing some
-* number of descriptors. The Commit Pointer points to the descriptor in the
-* list which is to be committed. It is also used to determine that no
-* descriptor is waiting to be commited (NULL). The Last Pointer points to
-* the last descriptor that was put into the list. It typically points
-* to the previous descriptor to the one pointed to by the Put Pointer.
-* Comparisons are done between these pointers to determine when the following
-* special conditions exist.
-
-* Single Put And Commit
-*
-* The buffer descriptor is ready to be used by the hardware so it is important
-* for the descriptor to not appear to be waiting to be committed. The commit
-* pointer is reset when a commit is done indicating there are no descriptors
-* waiting to be committed. In all cases but this one, the descriptor is
-* changed to cause the hardware to go to the next descriptor after processing
-* this one. But in this case, this is the last descriptor in the list such
-* that it must not be changed.
-*
-* 3 Or More Puts And Commit
-*
-* A series of 3 or more puts followed by a single commit is different in that
-* only the 1st descriptor put into the list is changed when the commit is done.
-* This requires each put starting on the 3rd to change the previous descriptor
-* so that it allows the hardware to continue to the next descriptor in the list.
-*
-* The 1st Put Following A Commit
-*
-* The commit caused the commit pointer to be NULL indicating that there are no
-* descriptors waiting to be committed. It is necessary for the next put to set
-* the commit pointer so that a commit must follow the put for the hardware to
-* use the descriptor.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- ------------------------------------------------------
-* 1.00a rpm 02/03/03 Removed the XST_DMA_SG_COUNT_EXCEEDED return code
-* from SetPktThreshold.
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xdma_channel.h"
-#include "xbasic_types.h"
-#include "xio.h"
-#include "xbuf_descriptor.h"
-#include "xstatus.h"
-
-/************************** Constant Definitions *****************************/
-
-#define XDC_SWCR_SG_ENABLE_MASK 0x80000000UL /* scatter gather enable */
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/* the following macro copies selected fields of a buffer descriptor to another
- * buffer descriptor, this was provided by the buffer descriptor component but
- * was moved here since it is only used internally to this component and since
- * it does not copy all fields
- */
-#define CopyBufferDescriptor(InstancePtr, DestinationPtr) \
-{ \
- *((u32 *)DestinationPtr + XBD_CONTROL_OFFSET) = \
- *((u32 *)InstancePtr + XBD_CONTROL_OFFSET); \
- *((u32 *)DestinationPtr + XBD_SOURCE_OFFSET) = \
- *((u32 *)InstancePtr + XBD_SOURCE_OFFSET); \
- *((u32 *)DestinationPtr + XBD_DESTINATION_OFFSET) = \
- *((u32 *)InstancePtr + XBD_DESTINATION_OFFSET); \
- *((u32 *)DestinationPtr + XBD_LENGTH_OFFSET) = \
- *((u32 *)InstancePtr + XBD_LENGTH_OFFSET); \
- *((u32 *)DestinationPtr + XBD_STATUS_OFFSET) = \
- *((u32 *)InstancePtr + XBD_STATUS_OFFSET); \
- *((u32 *)DestinationPtr + XBD_DEVICE_STATUS_OFFSET) = \
- *((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET); \
- *((u32 *)DestinationPtr + XBD_ID_OFFSET) = \
- *((u32 *)InstancePtr + XBD_ID_OFFSET); \
- *((u32 *)DestinationPtr + XBD_FLAGS_OFFSET) = \
- *((u32 *)InstancePtr + XBD_FLAGS_OFFSET); \
- *((u32 *)DestinationPtr + XBD_RQSTED_LENGTH_OFFSET) = \
- *((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET); \
-}
-
-/************************** Variable Definitions *****************************/
-
-/************************** Function Prototypes ******************************/
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SgStart
-*
-* DESCRIPTION:
-*
-* This function starts a scatter gather operation for a scatter gather
-* DMA channel. The first buffer descriptor in the buffer descriptor list
-* will be started with the scatter gather operation. A scatter gather list
-* should have previously been created for the DMA channel and buffer
-* descriptors put into the scatter gather list such that there are scatter
-* operations ready to be performed.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* A status containing XST_SUCCESS if scatter gather was started successfully
-* for the DMA channel.
-*
-* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not
-* been created.
-*
-* A value of XST_DMA_SG_LIST_EMPTY indicates scatter gather was not started
-* because the scatter gather list of the DMA channel does not contain any
-* buffer descriptors that are ready to be processed by the hardware.
-*
-* A value of XST_DMA_SG_IS_STARTED indicates scatter gather was not started
-* because the scatter gather was not stopped, but was already started.
-*
-* A value of XST_DMA_SG_BD_NOT_COMMITTED indicates the buffer descriptor of
-* scatter gather list which was to be started is not committed to the list.
-* This status is more likely if this function is being called from an ISR
-* and non-ISR processing is putting descriptors into the list.
-*
-* A value of XST_DMA_SG_NO_DATA indicates that the buffer descriptor of the
-* scatter gather list which was to be started had already been used by the
-* hardware for a DMA transfer that has been completed.
-*
-* NOTES:
-*
-* It is the responsibility of the caller to get all the buffer descriptors
-* after performing a stop operation and before performing a start operation.
-* If buffer descriptors are not retrieved between stop and start operations,
-* buffer descriptors may be processed by the hardware more than once.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_SgStart(XDmaChannel * InstancePtr)
-{
- u32 Register;
- XBufDescriptor *LastDescriptorPtr;
-
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* if a scatter gather list has not been created yet, return a status */
-
- if (InstancePtr->TotalDescriptorCount == 0) {
- return XST_DMA_SG_NO_LIST;
- }
-
- /* if the scatter gather list exists but is empty then return a status */
-
- if (XDmaChannel_IsSgListEmpty(InstancePtr)) {
- return XST_DMA_SG_LIST_EMPTY;
- }
-
- /* if scatter gather is busy for the DMA channel, return a status because
- * restarting it could lose data
- */
-
- Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAS_REG_OFFSET);
- if (Register & XDC_DMASR_SG_BUSY_MASK) {
- return XST_DMA_SG_IS_STARTED;
- }
-
- /* get the address of the last buffer descriptor which the DMA hardware
- * finished processing
- */
- LastDescriptorPtr =
- (XBufDescriptor *) XIo_In32(InstancePtr->RegBaseAddress +
- XDC_BDA_REG_OFFSET);
-
- /* setup the first buffer descriptor that will be sent when the scatter
- * gather channel is enabled, this is only necessary one time since
- * the BDA register of the channel maintains the last buffer descriptor
- * processed
- */
- if (LastDescriptorPtr == NULL) {
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_BDA_REG_OFFSET,
- (u32) InstancePtr->GetPtr);
- } else {
- XBufDescriptor *NextDescriptorPtr;
-
- /* get the next descriptor to be started, if the status indicates it
- * hasn't already been used by the h/w, then it's OK to start it,
- * s/w sets the status of each descriptor to busy and then h/w clears
- * the busy when it is complete
- */
- NextDescriptorPtr =
- XBufDescriptor_GetNextPtr(LastDescriptorPtr);
-
- if ((XBufDescriptor_GetStatus(NextDescriptorPtr) &
- XDC_DMASR_BUSY_MASK) == 0) {
- return XST_DMA_SG_NO_DATA;
- }
- /* don't start the DMA SG channel if the descriptor to be processed
- * by h/w is to be committed by the s/w, this function can be called
- * such that it interrupts a thread that was putting into the list
- */
- if (NextDescriptorPtr == InstancePtr->CommitPtr) {
- return XST_DMA_SG_BD_NOT_COMMITTED;
- }
- }
-
- /* start the scatter gather operation by clearing the stop bit in the
- * control register and setting the enable bit in the s/w control register,
- * both of these are necessary to cause it to start, right now the order of
- * these statements is important, the software control register should be
- * set 1st. The other order can cause the CPU to have a loss of sync
- * because it cannot read/write the register while the DMA operation is
- * running
- */
-
- Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET);
-
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET,
- Register | XDC_SWCR_SG_ENABLE_MASK);
-
- Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET);
-
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET,
- Register & ~XDC_DMACR_SG_DISABLE_MASK);
-
- /* indicate the DMA channel scatter gather operation was started
- * successfully
- */
- return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SgStop
-*
-* DESCRIPTION:
-*
-* This function stops a scatter gather operation for a scatter gather
-* DMA channel. This function starts the process of stopping a scatter
-* gather operation that is in progress and waits for the stop to be completed.
-* Since it waits for the operation to stopped before returning, this function
-* could take an amount of time relative to the size of the DMA scatter gather
-* operation which is in progress. The scatter gather list of the DMA channel
-* is not modified by this function such that starting the scatter gather
-* channel after stopping it will cause it to resume. This operation is
-* considered to be a graceful stop in that the scatter gather operation
-* completes the current buffer descriptor before stopping.
-*
-* If the interrupt is enabled, an interrupt will be generated when the
-* operation is stopped and the caller is responsible for handling the
-* interrupt.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* BufDescriptorPtr is also a return value which contains a pointer to the
-* buffer descriptor which the scatter gather operation completed when it
-* was stopped.
-*
-* RETURN VALUE:
-*
-* A status containing XST_SUCCESS if scatter gather was stopped successfully
-* for the DMA channel.
-*
-* A value of XST_DMA_SG_IS_STOPPED indicates scatter gather was not stoppped
-* because the scatter gather is not started, but was already stopped.
-*
-* BufDescriptorPtr contains a pointer to the buffer descriptor which was
-* completed when the operation was stopped.
-*
-* NOTES:
-*
-* This function implements a loop which polls the hardware for an infinite
-* amount of time. If the hardware is not operating correctly, this function
-* may never return.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_SgStop(XDmaChannel * InstancePtr,
- XBufDescriptor ** BufDescriptorPtr)
-{
- u32 Register;
-
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(BufDescriptorPtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* get the contents of the software control register, if scatter gather is not
- * enabled (started), then return a status because the disable acknowledge
- * would not be generated
- */
- Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET);
-
- if ((Register & XDC_SWCR_SG_ENABLE_MASK) == 0) {
- return XST_DMA_SG_IS_STOPPED;
- }
-
- /* Ensure the interrupt status for the scatter gather is cleared such
- * that this function will wait til the disable has occurred, writing
- * a 1 to only that bit in the register will clear only it
- */
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET,
- XDC_IXR_SG_DISABLE_ACK_MASK);
-
- /* disable scatter gather by writing to the software control register
- * without modifying any other bits of the register
- */
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET,
- Register & ~XDC_SWCR_SG_ENABLE_MASK);
-
- /* scatter gather does not disable immediately, but after the current
- * buffer descriptor is complete, so wait for the DMA channel to indicate
- * the disable is complete
- */
- do {
- Register =
- XIo_In32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET);
- } while ((Register & XDC_IXR_SG_DISABLE_ACK_MASK) == 0);
-
- /* Ensure the interrupt status for the scatter gather disable is cleared,
- * writing a 1 to only that bit in the register will clear only it
- */
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET,
- XDC_IXR_SG_DISABLE_ACK_MASK);
-
- /* set the specified buffer descriptor pointer to point to the buffer
- * descriptor that the scatter gather DMA channel was processing
- */
- *BufDescriptorPtr =
- (XBufDescriptor *) XIo_In32(InstancePtr->RegBaseAddress +
- XDC_BDA_REG_OFFSET);
-
- return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_CreateSgList
-*
-* DESCRIPTION:
-*
-* This function creates a scatter gather list in the DMA channel. A scatter
-* gather list consists of a list of buffer descriptors that are available to
-* be used for scatter gather operations. Buffer descriptors are put into the
-* list to request a scatter gather operation to be performed.
-*
-* A number of buffer descriptors are created from the specified memory and put
-* into a buffer descriptor list as empty buffer descriptors. This function must
-* be called before non-empty buffer descriptors may be put into the DMA channel
-* to request scatter gather operations.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* MemoryPtr contains a pointer to the memory which is to be used for buffer
-* descriptors and must not be cached.
-*
-* ByteCount contains the number of bytes for the specified memory to be used
-* for buffer descriptors.
-*
-* RETURN VALUE:
-*
-* A status contains XST_SUCCESS if the scatter gather list was successfully
-* created.
-*
-* A value of XST_DMA_SG_LIST_EXISTS indicates that the scatter gather list
-* was not created because the list has already been created.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_CreateSgList(XDmaChannel * InstancePtr,
- u32 * MemoryPtr, u32 ByteCount)
-{
- XBufDescriptor *BufferDescriptorPtr = (XBufDescriptor *) MemoryPtr;
- XBufDescriptor *PreviousDescriptorPtr = NULL;
- XBufDescriptor *StartOfListPtr = BufferDescriptorPtr;
- u32 UsedByteCount;
-
- /* assert to verify valid input arguments, alignment for those
- * arguments that have alignment restrictions, and at least enough
- * memory for one buffer descriptor
- */
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(MemoryPtr != NULL);
- XASSERT_NONVOID(((u32) MemoryPtr & 3) == 0);
- XASSERT_NONVOID(ByteCount != 0);
- XASSERT_NONVOID(ByteCount >= sizeof (XBufDescriptor));
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* if the scatter gather list has already been created, then return
- * with a status
- */
- if (InstancePtr->TotalDescriptorCount != 0) {
- return XST_DMA_SG_LIST_EXISTS;
- }
-
- /* loop thru the specified memory block and create as many buffer
- * descriptors as possible putting each into the list which is
- * implemented as a ring buffer, make sure not to use any memory which
- * is not large enough for a complete buffer descriptor
- */
- UsedByteCount = 0;
- while ((UsedByteCount + sizeof (XBufDescriptor)) <= ByteCount) {
- /* setup a pointer to the next buffer descriptor in the memory and
- * update # of used bytes to know when all of memory is used
- */
- BufferDescriptorPtr = (XBufDescriptor *) ((u32) MemoryPtr +
- UsedByteCount);
-
- /* initialize the new buffer descriptor such that it doesn't contain
- * garbage which could be used by the DMA hardware
- */
- XBufDescriptor_Initialize(BufferDescriptorPtr);
-
- /* if this is not the first buffer descriptor to be created,
- * then link it to the last created buffer descriptor
- */
- if (PreviousDescriptorPtr != NULL) {
- XBufDescriptor_SetNextPtr(PreviousDescriptorPtr,
- BufferDescriptorPtr);
- }
-
- /* always keep a pointer to the last created buffer descriptor such
- * that they can be linked together in the ring buffer
- */
- PreviousDescriptorPtr = BufferDescriptorPtr;
-
- /* keep a count of the number of descriptors in the list to allow
- * error processing to be performed
- */
- InstancePtr->TotalDescriptorCount++;
-
- UsedByteCount += sizeof (XBufDescriptor);
- }
-
- /* connect the last buffer descriptor created and inserted in the list
- * to the first such that a ring buffer is created
- */
- XBufDescriptor_SetNextPtr(BufferDescriptorPtr, StartOfListPtr);
-
- /* initialize the ring buffer to indicate that there are no
- * buffer descriptors in the list which point to valid data buffers
- */
- InstancePtr->PutPtr = BufferDescriptorPtr;
- InstancePtr->GetPtr = BufferDescriptorPtr;
- InstancePtr->CommitPtr = NULL;
- InstancePtr->LastPtr = BufferDescriptorPtr;
- InstancePtr->ActiveDescriptorCount = 0;
-
- /* indicate the scatter gather list was successfully created */
-
- return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_IsSgListEmpty
-*
-* DESCRIPTION:
-*
-* This function determines if the scatter gather list of a DMA channel is
-* empty with regard to buffer descriptors which are pointing to buffers to be
-* used for scatter gather operations.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* A value of TRUE if the scatter gather list is empty, otherwise a value of
-* FALSE.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_IsSgListEmpty(XDmaChannel * InstancePtr)
-{
- /* assert to verify valid input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* if the number of descriptors which are being used in the list is zero
- * then the list is empty
- */
- return (InstancePtr->ActiveDescriptorCount == 0);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_PutDescriptor
-*
-* DESCRIPTION:
-*
-* This function puts a buffer descriptor into the DMA channel scatter
-* gather list. A DMA channel maintains a list of buffer descriptors which are
-* to be processed. This function puts the specified buffer descriptor
-* at the next location in the list. Note that since the list is already intact,
-* the information in the parameter is copied into the list (rather than modify
-* list pointers on the fly).
-*
-* After buffer descriptors are put into the list, they must also be committed
-* by calling another function. This allows multiple buffer descriptors which
-* span a single packet to be put into the list while preventing the hardware
-* from starting the first buffer descriptor of the packet.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* BufferDescriptorPtr is a pointer to the buffer descriptor to be put into
-* the next available location of the scatter gather list.
-*
-* RETURN VALUE:
-*
-* A status which indicates XST_SUCCESS if the buffer descriptor was
-* successfully put into the scatter gather list.
-*
-* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not
-* been created.
-*
-* A value of XST_DMA_SG_LIST_FULL indicates the buffer descriptor was not
-* put into the list because the list was full.
-*
-* A value of XST_DMA_SG_BD_LOCKED indicates the buffer descriptor was not
-* put into the list because the buffer descriptor in the list which is to
-* be overwritten was locked. A locked buffer descriptor indicates the higher
-* layered software is still using the buffer descriptor.
-*
-* NOTES:
-*
-* It is necessary to create a scatter gather list for a DMA channel before
-* putting buffer descriptors into it.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_PutDescriptor(XDmaChannel * InstancePtr,
- XBufDescriptor * BufferDescriptorPtr)
-{
- u32 Control;
-
- /* assert to verify valid input arguments and alignment for those
- * arguments that have alignment restrictions
- */
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(BufferDescriptorPtr != NULL);
- XASSERT_NONVOID(((u32) BufferDescriptorPtr & 3) == 0);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* if a scatter gather list has not been created yet, return a status */
-
- if (InstancePtr->TotalDescriptorCount == 0) {
- return XST_DMA_SG_NO_LIST;
- }
-
- /* if the list is full because all descriptors are pointing to valid
- * buffers, then indicate an error, this code assumes no list or an
- * empty list is detected above
- */
- if (InstancePtr->ActiveDescriptorCount ==
- InstancePtr->TotalDescriptorCount) {
- return XST_DMA_SG_LIST_FULL;
- }
-
- /* if the buffer descriptor in the list which is to be overwritten is
- * locked, then don't overwrite it and return a status
- */
- if (XBufDescriptor_IsLocked(InstancePtr->PutPtr)) {
- return XST_DMA_SG_BD_LOCKED;
- }
-
- /* set the scatter gather stop bit in the control word of the descriptor
- * to cause the h/w to stop after it processes this descriptor since it
- * will be the last in the list
- */
- Control = XBufDescriptor_GetControl(BufferDescriptorPtr);
- XBufDescriptor_SetControl(BufferDescriptorPtr,
- Control | XDC_DMACR_SG_DISABLE_MASK);
-
- /* set both statuses in the descriptor so we tell if they are updated with
- * the status of the transfer, the hardware should change the busy in the
- * DMA status to be false when it completes
- */
- XBufDescriptor_SetStatus(BufferDescriptorPtr, XDC_DMASR_BUSY_MASK);
- XBufDescriptor_SetDeviceStatus(BufferDescriptorPtr, 0);
-
- /* copy the descriptor into the next position in the list so it's ready to
- * be used by the h/w, this assumes the descriptor in the list prior to this
- * one still has the stop bit in the control word set such that the h/w
- * use this one yet
- */
- CopyBufferDescriptor(BufferDescriptorPtr, InstancePtr->PutPtr);
-
- /* only the last in the list and the one to be committed have scatter gather
- * disabled in the control word, a commit requires only one descriptor
- * to be changed, when # of descriptors to commit > 2 all others except the
- * 1st and last have scatter gather enabled
- */
- if ((InstancePtr->CommitPtr != InstancePtr->LastPtr) &&
- (InstancePtr->CommitPtr != NULL)) {
- Control = XBufDescriptor_GetControl(InstancePtr->LastPtr);
- XBufDescriptor_SetControl(InstancePtr->LastPtr,
- Control & ~XDC_DMACR_SG_DISABLE_MASK);
- }
-
- /* update the list data based upon putting a descriptor into the list,
- * these operations must be last
- */
- InstancePtr->ActiveDescriptorCount++;
-
- /* only update the commit pointer if it is not already active, this allows
- * it to be deactivated after every commit such that a single descriptor
- * which is committed does not appear to be waiting to be committed
- */
- if (InstancePtr->CommitPtr == NULL) {
- InstancePtr->CommitPtr = InstancePtr->LastPtr;
- }
-
- /* these updates MUST BE LAST after the commit pointer update in order for
- * the commit pointer to track the correct descriptor to be committed
- */
- InstancePtr->LastPtr = InstancePtr->PutPtr;
- InstancePtr->PutPtr = XBufDescriptor_GetNextPtr(InstancePtr->PutPtr);
-
- return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_CommitPuts
-*
-* DESCRIPTION:
-*
-* This function commits the buffer descriptors which have been put into the
-* scatter list for the DMA channel since the last commit operation was
-* performed. This enables the calling functions to put several buffer
-* descriptors into the list (e.g.,a packet's worth) before allowing the scatter
-* gather operations to start. This prevents the DMA channel hardware from
-* starting to use the buffer descriptors in the list before they are ready
-* to be used (multiple buffer descriptors for a single packet).
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* A status indicating XST_SUCCESS if the buffer descriptors of the list were
-* successfully committed.
-*
-* A value of XST_DMA_SG_NOTHING_TO_COMMIT indicates that the buffer descriptors
-* were not committed because there was nothing to commit in the list. All the
-* buffer descriptors which are in the list are commited.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_CommitPuts(XDmaChannel * InstancePtr)
-{
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* if the buffer descriptor to be committed is already committed or
- * the list is empty (none have been put in), then indicate an error
- */
- if ((InstancePtr->CommitPtr == NULL) ||
- XDmaChannel_IsSgListEmpty(InstancePtr)) {
- return XST_DMA_SG_NOTHING_TO_COMMIT;
- }
-
- /* last descriptor in the list must have scatter gather disabled so the end
- * of the list is hit by h/w, if descriptor to commit is not last in list,
- * commit descriptors by enabling scatter gather in the descriptor
- */
- if (InstancePtr->CommitPtr != InstancePtr->LastPtr) {
- u32 Control;
-
- Control = XBufDescriptor_GetControl(InstancePtr->CommitPtr);
- XBufDescriptor_SetControl(InstancePtr->CommitPtr, Control &
- ~XDC_DMACR_SG_DISABLE_MASK);
- }
- /* Update the commit pointer to indicate that there is nothing to be
- * committed, this state is used by start processing to know that the
- * buffer descriptor to start is not waiting to be committed
- */
- InstancePtr->CommitPtr = NULL;
-
- return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetDescriptor
-*
-* DESCRIPTION:
-*
-* This function gets a buffer descriptor from the scatter gather list of the
-* DMA channel. The buffer descriptor is retrieved from the scatter gather list
-* and the scatter gather list is updated to not include the retrieved buffer
-* descriptor. This is typically done after a scatter gather operation
-* completes indicating that a data buffer has been successfully sent or data
-* has been received into the data buffer. The purpose of this function is to
-* allow the device using the scatter gather operation to get the results of the
-* operation.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* BufDescriptorPtr is a pointer to a pointer to the buffer descriptor which
-* was retrieved from the list. The buffer descriptor is not really removed
-* from the list, but it is changed to a state such that the hardware will not
-* use it again until it is put into the scatter gather list of the DMA channel.
-*
-* RETURN VALUE:
-*
-* A status indicating XST_SUCCESS if a buffer descriptor was retrieved from
-* the scatter gather list of the DMA channel.
-*
-* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not
-* been created.
-*
-* A value of XST_DMA_SG_LIST_EMPTY indicates no buffer descriptor was
-* retrieved from the list because there are no buffer descriptors to be
-* processed in the list.
-*
-* BufDescriptorPtr is updated to point to the buffer descriptor which was
-* retrieved from the list if the status indicates success.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_GetDescriptor(XDmaChannel * InstancePtr,
- XBufDescriptor ** BufDescriptorPtr)
-{
- u32 Control;
-
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(BufDescriptorPtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* if a scatter gather list has not been created yet, return a status */
-
- if (InstancePtr->TotalDescriptorCount == 0) {
- return XST_DMA_SG_NO_LIST;
- }
-
- /* if the buffer descriptor list is empty, then indicate an error */
-
- if (XDmaChannel_IsSgListEmpty(InstancePtr)) {
- return XST_DMA_SG_LIST_EMPTY;
- }
-
- /* retrieve the next buffer descriptor which is ready to be processed from
- * the buffer descriptor list for the DMA channel, set the control word
- * such that hardware will stop after the descriptor has been processed
- */
- Control = XBufDescriptor_GetControl(InstancePtr->GetPtr);
- XBufDescriptor_SetControl(InstancePtr->GetPtr,
- Control | XDC_DMACR_SG_DISABLE_MASK);
-
- /* set the input argument, which is also an output, to point to the
- * buffer descriptor which is to be retrieved from the list
- */
- *BufDescriptorPtr = InstancePtr->GetPtr;
-
- /* update the pointer of the DMA channel to reflect the buffer descriptor
- * was retrieved from the list by setting it to the next buffer descriptor
- * in the list and indicate one less descriptor in the list now
- */
- InstancePtr->GetPtr = XBufDescriptor_GetNextPtr(InstancePtr->GetPtr);
- InstancePtr->ActiveDescriptorCount--;
-
- return XST_SUCCESS;
-}
-
-/*********************** Interrupt Collescing Functions **********************/
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetPktCount
-*
-* DESCRIPTION:
-*
-* This function returns the value of the unserviced packet count register of
-* the DMA channel. This count represents the number of packets that have been
-* sent or received by the hardware, but not processed by software.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* The unserviced packet counter register contents for the DMA channel.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetPktCount(XDmaChannel * InstancePtr)
-{
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* get the unserviced packet count from the register and return it */
-
- return XIo_In32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_DecrementPktCount
-*
-* DESCRIPTION:
-*
-* This function decrements the value of the unserviced packet count register.
-* This informs the hardware that the software has processed a packet. The
-* unserviced packet count register may only be decremented by one in the
-* hardware.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_DecrementPktCount(XDmaChannel * InstancePtr)
-{
- u32 Register;
-
- /* assert to verify input arguments */
-
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* if the unserviced packet count register can be decremented (rather
- * than rolling over) decrement it by writing a 1 to the register,
- * this is the only valid write to the register as it serves as an
- * acknowledge that a packet was handled by the software
- */
- Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET);
- if (Register > 0) {
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET,
- 1UL);
- }
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetPktThreshold
-*
-* DESCRIPTION:
-*
-* This function sets the value of the packet count threshold register of the
-* DMA channel. It reflects the number of packets that must be sent or
-* received before generating an interrupt. This value helps implement
-* a concept called "interrupt coalescing", which is used to reduce the number
-* of interrupts from devices with high data rates.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* Threshold is the value that is written to the threshold register of the
-* DMA channel.
-*
-* RETURN VALUE:
-*
-* A status containing XST_SUCCESS if the packet count threshold was
-* successfully set.
-*
-* NOTES:
-*
-* The packet threshold could be set to larger than the number of descriptors
-* allocated to the DMA channel. In this case, the wait bound will take over
-* and always indicate data arrival. There was a check in this function that
-* returned an error if the treshold was larger than the number of descriptors,
-* but that was removed because users would then have to set the threshold
-* only after they set descriptor space, which is an order dependency that
-* caused confustion.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_SetPktThreshold(XDmaChannel * InstancePtr, u8 Threshold)
-{
- /* assert to verify input arguments, don't assert the threshold since
- * it's range is unknown
- */
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* set the packet count threshold in the register such that an interrupt
- * may be generated, if enabled, when the packet count threshold is
- * reached or exceeded
- */
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_PCT_REG_OFFSET,
- (u32) Threshold);
-
- /* indicate the packet count threshold was successfully set */
-
- return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetPktThreshold
-*
-* DESCRIPTION:
-*
-* This function gets the value of the packet count threshold register of the
-* DMA channel. This value reflects the number of packets that must be sent or
-* received before generating an interrupt. This value helps implement a concept
-* called "interrupt coalescing", which is used to reduce the number of
-* interrupts from devices with high data rates.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* The packet threshold register contents for the DMA channel and is a value in
-* the range 0 - 1023. A value of 0 indicates the packet wait bound timer is
-* disabled.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u8
-XDmaChannel_GetPktThreshold(XDmaChannel * InstancePtr)
-{
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* get the packet count threshold from the register and return it,
- * since only 8 bits are used, cast it to return only those bits */
-
- return (u8) XIo_In32(InstancePtr->RegBaseAddress + XDC_PCT_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetPktWaitBound
-*
-* DESCRIPTION:
-*
-* This function sets the value of the packet wait bound register of the
-* DMA channel. This value reflects the timer value used to trigger an
-* interrupt when not enough packets have been received to reach the packet
-* count threshold.
-*
-* The timer is in millisecond units with +/- 33% accuracy.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* WaitBound is the value, in milliseconds, to be stored in the wait bound
-* register of the DMA channel and is a value in the range 0 - 1023. A value
-* of 0 disables the packet wait bound timer.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_SetPktWaitBound(XDmaChannel * InstancePtr, u32 WaitBound)
-{
- /* assert to verify input arguments */
-
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(WaitBound < 1024);
- XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* set the packet wait bound in the register such that interrupt may be
- * generated, if enabled, when packets have not been handled for a specific
- * amount of time
- */
- XIo_Out32(InstancePtr->RegBaseAddress + XDC_PWB_REG_OFFSET, WaitBound);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetPktWaitBound
-*
-* DESCRIPTION:
-*
-* This function gets the value of the packet wait bound register of the
-* DMA channel. This value contains the timer value used to trigger an
-* interrupt when not enough packets have been received to reach the packet
-* count threshold.
-*
-* The timer is in millisecond units with +/- 33% accuracy.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* The packet wait bound register contents for the DMA channel.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetPktWaitBound(XDmaChannel * InstancePtr)
-{
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* get the packet wait bound from the register and return it */
-
- return XIo_In32(InstancePtr->RegBaseAddress + XDC_PWB_REG_OFFSET);
-}
+++ /dev/null
-/*
- * xio.h
- *
- * Defines XIo functions for Xilinx OCP in terms of Linux primitives
- *
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef XIO_H
-#define XIO_H
-
-#include "xbasic_types.h"
-#include <asm/io.h>
-
-typedef u32 XIo_Address;
-
-extern inline u8
-XIo_In8(XIo_Address InAddress)
-{
- return (u8) in_8((volatile unsigned char *) InAddress);
-}
-extern inline u16
-XIo_In16(XIo_Address InAddress)
-{
- return (u16) in_be16((volatile unsigned short *) InAddress);
-}
-extern inline u32
-XIo_In32(XIo_Address InAddress)
-{
- return (u32) in_be32((volatile unsigned *) InAddress);
-}
-extern inline void
-XIo_Out8(XIo_Address OutAddress, u8 Value)
-{
- out_8((volatile unsigned char *) OutAddress, Value);
-}
-extern inline void
-XIo_Out16(XIo_Address OutAddress, u16 Value)
-{
- out_be16((volatile unsigned short *) OutAddress, Value);
-}
-extern inline void
-XIo_Out32(XIo_Address OutAddress, u32 Value)
-{
- out_be32((volatile unsigned *) OutAddress, Value);
-}
-
-#define XIo_ToLittleEndian16(s,d) (*(u16*)(d) = cpu_to_le16((u16)(s)))
-#define XIo_ToLittleEndian32(s,d) (*(u32*)(d) = cpu_to_le32((u32)(s)))
-#define XIo_ToBigEndian16(s,d) (*(u16*)(d) = cpu_to_be16((u16)(s)))
-#define XIo_ToBigEndian32(s,d) (*(u32*)(d) = cpu_to_be32((u32)(s)))
-
-#define XIo_FromLittleEndian16(s,d) (*(u16*)(d) = le16_to_cpu((u16)(s)))
-#define XIo_FromLittleEndian32(s,d) (*(u32*)(d) = le32_to_cpu((u32)(s)))
-#define XIo_FromBigEndian16(s,d) (*(u16*)(d) = be16_to_cpu((u16)(s)))
-#define XIo_FromBigEndian32(s,d) (*(u32*)(d) = be32_to_cpu((u32)(s)))
-
-#endif /* XIO_H */
+++ /dev/null
-/* $Id: xipif_v1_23_b.c,v 1.1 2002/03/18 23:24:52 linnj Exp $ */
-/******************************************************************************
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
-* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
-* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE.
-*
-* (c) Copyright 2002 Xilinx Inc.
-* All rights reserved.
-*
-******************************************************************************/
-/******************************************************************************
-*
-* FILENAME:
-*
-* xipif.c
-*
-* DESCRIPTION:
-*
-* This file contains the implementation of the XIpIf component. The
-* XIpIf component encapsulates the IPIF, which is the standard interface
-* that IP must adhere to when connecting to a bus. The purpose of this
-* component is to encapsulate the IPIF processing such that maintainability
-* is increased. This component does not provide a lot of abstraction from
-* from the details of the IPIF as it is considered a building block for
-* device drivers. A device driver designer must be familiar with the
-* details of the IPIF hardware to use this component.
-*
-* The IPIF hardware provides a building block for all hardware devices such
-* that each device does not need to reimplement these building blocks. The
-* IPIF contains other building blocks, such as FIFOs and DMA channels, which
-* are also common to many devices. These blocks are implemented as separate
-* hardware blocks and instantiated within the IPIF. The primary hardware of
-* the IPIF which is implemented by this software component is the interrupt
-* architecture. Since there are many blocks of a device which may generate
-* interrupts, all the interrupt processing is contained in the common part
-* of the device, the IPIF. This interrupt processing is for the device level
-* only and does not include any processing for the interrupt controller.
-*
-* A device is a mechanism such as an Ethernet MAC. The device is made
-* up of several parts which include an IPIF and the IP. The IPIF contains most
-* of the device infrastructure which is common to all devices, such as
-* interrupt processing, DMA channels, and FIFOs. The infrastructure may also
-* be referred to as IPIF internal blocks since they are part of the IPIF and
-* are separate blocks that can be selected based upon the needs of the device.
-* The IP of the device is the logic that is unique to the device and interfaces
-* to the IPIF of the device.
-*
-* In general, there are two levels of registers within the IPIF. The first
-* level, referred to as the device level, contains registers which are for the
-* entire device. The second level, referred to as the IP level, contains
-* registers which are specific to the IP of the device. The two levels of
-* registers are designed to be hierarchical such that the device level is
-* is a more general register set above the more specific registers of the IP.
-* The IP level of registers provides functionality which is typically common
-* across all devices and allows IP designers to focus on the unique aspects
-* of the IP.
-*
-* The interrupt registers of the IPIF are parameterizable such that the only
-* the number of bits necessary for the device are implemented. The functions
-* of this component do not attempt to validate that the passed in arguments are
-* valid based upon the number of implemented bits. This is necessary to
-* maintain the level of performance required for the common components. Bits
-* of the registers are assigned starting at the least significant bit of the
-* registers.
-*
-* Critical Sections
-*
-* It is the responsibility of the device driver designer to use critical
-* sections as necessary when calling functions of the IPIF. This component
-* does not use critical sections and it does access registers using
-* read-modify-write operations. Calls to IPIF functions from a main thread
-* and from an interrupt context could produce unpredictable behavior such that
-* the caller must provide the appropriate critical sections.
-*
-* Mutual Exclusion
-*
-* The functions of the IPIF are not thread safe such that the caller of all
-* functions is responsible for ensuring mutual exclusion for an IPIF. Mutual
-* exclusion across multiple IPIF components is not necessary.
-*
-* NOTES:
-*
-* None.
-*
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.23b jhl 02/27/01 Repartioned to reduce size
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xipif_v1_23_b.h"
-#include "xio.h"
-
-/************************** Constant Definitions *****************************/
-
-/* the following constant is used to generate bit masks for register testing
- * in the self test functions, it defines the starting bit mask that is to be
- * shifted from the LSB to MSB in creating a register test mask
- */
-#define XIIF_V123B_FIRST_BIT_MASK 1UL
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Variable Definitions *****************************/
-
-/************************** Function Prototypes ******************************/
-
-static XStatus IpIntrSelfTest(u32 RegBaseAddress, u32 IpRegistersWidth);
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XIpIf_SelfTest
-*
-* DESCRIPTION:
-*
-* This function performs a self test on the specified IPIF component. Many
-* of the registers in the IPIF are tested to ensure proper operation. This
-* function is destructive because the IPIF is reset at the start of the test
-* and at the end of the test to ensure predictable results. The IPIF reset
-* also resets the entire device that uses the IPIF. This function exits with
-* all interrupts for the device disabled.
-*
-* ARGUMENTS:
-*
-* InstancePtr points to the XIpIf to operate on.
-*
-* DeviceRegistersWidth contains the number of bits in the device interrupt
-* registers. The hardware is parameterizable such that only the number of bits
-* necessary to support a device are implemented. This value must be between 0
-* and 32 with 0 indicating there are no device interrupt registers used.
-*
-* IpRegistersWidth contains the number of bits in the IP interrupt registers
-* of the device. The hardware is parameterizable such that only the number of
-* bits necessary to support a device are implemented. This value must be
-* between 0 and 32 with 0 indicating there are no IP interrupt registers used.
-*
-* RETURN VALUE:
-*
-* A value of XST_SUCCESS indicates the test was successful with no errors.
-* Any one of the following error values may also be returned.
-*
-* XST_IPIF_RESET_REGISTER_ERROR The value of a register at reset was
-* not valid
-* XST_IPIF_IP_STATUS_ERROR A write to the IP interrupt status
-* register did not read back correctly
-* XST_IPIF_IP_ACK_ERROR One or more bits in the IP interrupt
-* status register did not reset when acked
-* XST_IPIF_IP_ENABLE_ERROR The IP interrupt enable register
-* did not read back correctly based upon
-* what was written to it
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-
-/* the following constant defines the maximum number of bits which may be
- * used in the registers at the device and IP levels, this is based upon the
- * number of bits available in the registers
- */
-#define XIIF_V123B_MAX_REG_BIT_COUNT 32
-
-XStatus
-XIpIfV123b_SelfTest(u32 RegBaseAddress, u8 IpRegistersWidth)
-{
- XStatus Status;
-
- /* assert to verify arguments are valid */
-
- XASSERT_NONVOID(IpRegistersWidth <= XIIF_V123B_MAX_REG_BIT_COUNT);
-
- /* reset the IPIF such that it's in a known state before the test
- * and interrupts are globally disabled
- */
- XIIF_V123B_RESET(RegBaseAddress);
-
- /* perform the self test on the IP interrupt registers, if
- * it is not successful exit with the status
- */
- Status = IpIntrSelfTest(RegBaseAddress, IpRegistersWidth);
- if (Status != XST_SUCCESS) {
- return Status;
- }
-
- /* reset the IPIF such that it's in a known state before exiting test */
-
- XIIF_V123B_RESET(RegBaseAddress);
-
- /* reaching this point means there were no errors, return success */
-
- return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* IpIntrSelfTest
-*
-* DESCRIPTION:
-*
-* Perform a self test on the IP interrupt registers of the IPIF. This
-* function modifies registers of the IPIF such that they are not guaranteed
-* to be in the same state when it returns. Any bits in the IP interrupt
-* status register which are set are assumed to be set by default after a reset
-* and are not tested in the test.
-*
-* ARGUMENTS:
-*
-* InstancePtr points to the XIpIf to operate on.
-*
-* IpRegistersWidth contains the number of bits in the IP interrupt registers
-* of the device. The hardware is parameterizable such that only the number of
-* bits necessary to support a device are implemented. This value must be
-* between 0 and 32 with 0 indicating there are no IP interrupt registers used.
-*
-* RETURN VALUE:
-*
-* A status indicating XST_SUCCESS if the test was successful. Otherwise, one
-* of the following values is returned.
-*
-* XST_IPIF_RESET_REGISTER_ERROR The value of a register at reset was
-* not valid
-* XST_IPIF_IP_STATUS_ERROR A write to the IP interrupt status
-* register did not read back correctly
-* XST_IPIF_IP_ACK_ERROR One or more bits in the IP status
-* register did not reset when acked
-* XST_IPIF_IP_ENABLE_ERROR The IP interrupt enable register
-* did not read back correctly based upon
-* what was written to it
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-static XStatus
-IpIntrSelfTest(u32 RegBaseAddress, u32 IpRegistersWidth)
-{
- /* ensure that the IP interrupt interrupt enable register is zero
- * as it should be at reset, the interrupt status is dependent upon the
- * IP such that it's reset value is not known
- */
- if (XIIF_V123B_READ_IIER(RegBaseAddress) != 0) {
- return XST_IPIF_RESET_REGISTER_ERROR;
- }
-
- /* if there are any used IP interrupts, then test all of the interrupt
- * bits in all testable registers
- */
- if (IpRegistersWidth > 0) {
- u32 BitCount;
- u32 IpInterruptMask = XIIF_V123B_FIRST_BIT_MASK;
- u32 Mask = XIIF_V123B_FIRST_BIT_MASK; /* bits assigned MSB to LSB */
- u32 InterruptStatus;
-
- /* generate the register masks to be used for IP register tests, the
- * number of bits supported by the hardware is parameterizable such
- * that only that number of bits are implemented in the registers, the
- * bits are allocated starting at the MSB of the registers
- */
- for (BitCount = 1; BitCount < IpRegistersWidth; BitCount++) {
- Mask = Mask << 1;
- IpInterruptMask |= Mask;
- }
-
- /* get the current IP interrupt status register contents, any bits
- * already set must default to 1 at reset in the device and these
- * bits can't be tested in the following test, remove these bits from
- * the mask that was generated for the test
- */
- InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
- IpInterruptMask &= ~InterruptStatus;
-
- /* set the bits in the device status register and verify them by reading
- * the register again, all bits of the register are latched
- */
- XIIF_V123B_WRITE_IISR(RegBaseAddress, IpInterruptMask);
- InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
- if ((InterruptStatus & IpInterruptMask) != IpInterruptMask)
- {
- return XST_IPIF_IP_STATUS_ERROR;
- }
-
- /* test to ensure that the bits set in the IP interrupt status register
- * can be cleared by acknowledging them in the IP interrupt status
- * register then read it again and verify it was cleared
- */
- XIIF_V123B_WRITE_IISR(RegBaseAddress, IpInterruptMask);
- InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
- if ((InterruptStatus & IpInterruptMask) != 0) {
- return XST_IPIF_IP_ACK_ERROR;
- }
-
- /* set the IP interrupt enable set register and then read the IP
- * interrupt enable register and verify the interrupts were enabled
- */
- XIIF_V123B_WRITE_IIER(RegBaseAddress, IpInterruptMask);
- if (XIIF_V123B_READ_IIER(RegBaseAddress) != IpInterruptMask) {
- return XST_IPIF_IP_ENABLE_ERROR;
- }
-
- /* clear the IP interrupt enable register and then read the
- * IP interrupt enable register and verify the interrupts were disabled
- */
- XIIF_V123B_WRITE_IIER(RegBaseAddress, 0);
- if (XIIF_V123B_READ_IIER(RegBaseAddress) != 0) {
- return XST_IPIF_IP_ENABLE_ERROR;
- }
- }
- return XST_SUCCESS;
-}
+++ /dev/null
-/* $Id: xipif_v1_23_b.h,v 1.1 2002/03/18 23:24:52 linnj Exp $ */
-/******************************************************************************
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
-* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
-* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE.
-*
-* (c) Copyright 2002 Xilinx Inc.
-* All rights reserved.
-*
-******************************************************************************/
-/******************************************************************************
-*
-* FILENAME:
-*
-* xipif.h
-*
-* DESCRIPTION:
-*
-* The XIpIf component encapsulates the IPIF, which is the standard interface
-* that IP must adhere to when connecting to a bus. The purpose of this
-* component is to encapsulate the IPIF processing such that maintainability
-* is increased. This component does not provide a lot of abstraction from
-* from the details of the IPIF as it is considered a building block for
-* device drivers. A device driver designer must be familiar with the
-* details of the IPIF hardware to use this component.
-*
-* The IPIF hardware provides a building block for all hardware devices such
-* that each device does not need to reimplement these building blocks. The
-* IPIF contains other building blocks, such as FIFOs and DMA channels, which
-* are also common to many devices. These blocks are implemented as separate
-* hardware blocks and instantiated within the IPIF. The primary hardware of
-* the IPIF which is implemented by this software component is the interrupt
-* architecture. Since there are many blocks of a device which may generate
-* interrupts, all the interrupt processing is contained in the common part
-* of the device, the IPIF. This interrupt processing is for the device level
-* only and does not include any processing for the interrupt controller.
-*
-* A device is a mechanism such as an Ethernet MAC. The device is made
-* up of several parts which include an IPIF and the IP. The IPIF contains most
-* of the device infrastructure which is common to all devices, such as
-* interrupt processing, DMA channels, and FIFOs. The infrastructure may also
-* be referred to as IPIF internal blocks since they are part of the IPIF and
-* are separate blocks that can be selected based upon the needs of the device.
-* The IP of the device is the logic that is unique to the device and interfaces
-* to the IPIF of the device.
-*
-* In general, there are two levels of registers within the IPIF. The first
-* level, referred to as the device level, contains registers which are for the
-* entire device. The second level, referred to as the IP level, contains
-* registers which are specific to the IP of the device. The two levels of
-* registers are designed to be hierarchical such that the device level is
-* is a more general register set above the more specific registers of the IP.
-* The IP level of registers provides functionality which is typically common
-* across all devices and allows IP designers to focus on the unique aspects
-* of the IP.
-*
-* Critical Sections
-*
-* It is the responsibility of the device driver designer to use critical
-* sections as necessary when calling functions of the IPIF. This component
-* does not use critical sections and it does access registers using
-* read-modify-write operations. Calls to IPIF functions from a main thread
-* and from an interrupt context could produce unpredictable behavior such that
-* the caller must provide the appropriate critical sections.
-*
-* Mutual Exclusion
-*
-* The functions of the IPIF are not thread safe such that the caller of all
-* functions is responsible for ensuring mutual exclusion for an IPIF. Mutual
-* exclusion across multiple IPIF components is not necessary.
-*
-* NOTES:
-*
-* None.
-*
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.23b jhl 02/27/01 Repartioned to minimize size
-*
-******************************************************************************/
-
-#ifndef XIPIF_H /* prevent circular inclusions */
-#define XIPIF_H /* by using protection macros */
-
-/***************************** Include Files *********************************/
-#include "xbasic_types.h"
-#include "xstatus.h"
-#include "xversion.h"
-
-/************************** Constant Definitions *****************************/
-
-/* the following constants define the register offsets for the registers of the
- * IPIF, there are some holes in the memory map for reserved addresses to allow
- * other registers to be added and still match the memory map of the interrupt
- * controller registers
- */
-#define XIIF_V123B_DISR_OFFSET 0UL /* device interrupt status register */
-#define XIIF_V123B_DIPR_OFFSET 4UL /* device interrupt pending register */
-#define XIIF_V123B_DIER_OFFSET 8UL /* device interrupt enable register */
-#define XIIF_V123B_DIIR_OFFSET 24UL /* device interrupt ID register */
-#define XIIF_V123B_DGIER_OFFSET 28UL /* device global interrupt enable reg */
-#define XIIF_V123B_IISR_OFFSET 32UL /* IP interrupt status register */
-#define XIIF_V123B_IIER_OFFSET 40UL /* IP interrupt enable register */
-#define XIIF_V123B_RESETR_OFFSET 64UL /* reset register */
-
-#define XIIF_V123B_RESET_MASK 0xAUL
-
-/* the following constant is used for the device global interrupt enable
- * register, to enable all interrupts for the device, this is the only bit
- * in the register
- */
-#define XIIF_V123B_GINTR_ENABLE_MASK 0x80000000UL
-
-/* the following constants contain the masks to identify each internal IPIF
- * condition in the device registers of the IPIF, interrupts are assigned
- * in the register from LSB to the MSB
- */
-#define XIIF_V123B_ERROR_MASK 1UL /* LSB of the register */
-
-/* The following constants contain interrupt IDs which identify each internal
- * IPIF condition, this value must correlate with the mask constant for the
- * error
- */
-#define XIIF_V123B_ERROR_INTERRUPT_ID 0 /* interrupt bit #, (LSB = 0) */
-#define XIIF_V123B_NO_INTERRUPT_ID 128 /* no interrupts are pending */
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_RESET
-*
-* DESCRIPTION:
-*
-* Reset the IPIF component and hardware. This is a destructive operation that
-* could cause the loss of data since resetting the IPIF of a device also
-* resets the device using the IPIF and any blocks, such as FIFOs or DMA
-* channels, within the IPIF. All registers of the IPIF will contain their
-* reset value when this function returns.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-
-/* the following constant is used in the reset register to cause the IPIF to
- * reset
- */
-#define XIIF_V123B_RESET(RegBaseAddress) \
- XIo_Out32(RegBaseAddress + XIIF_V123B_RESETR_OFFSET, XIIF_V123B_RESET_MASK)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_WRITE_DISR
-*
-* DESCRIPTION:
-*
-* This function sets the device interrupt status register to the value.
-* This register indicates the status of interrupt sources for a device
-* which contains the IPIF. The status is independent of whether interrupts
-* are enabled and could be used for polling a device at a higher level rather
-* than a more detailed level.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device which contains the IPIF. With the exception of some internal IPIF
-* conditions, the contents of this register are not latched but indicate
-* the live status of the interrupt sources within the device. Writing any of
-* the non-latched bits of the register will have no effect on the register.
-*
-* For the latched bits of this register only, setting a bit which is zero
-* within this register causes an interrupt to generated. The device global
-* interrupt enable register and the device interrupt enable register must be set
-* appropriately to allow an interrupt to be passed out of the device. The
-* interrupt is cleared by writing to this register with the bits to be
-* cleared set to a one and all others to zero. This register implements a
-* toggle on write functionality meaning any bits which are set in the value
-* written cause the bits in the register to change to the opposite state.
-*
-* This function writes the specified value to the register such that
-* some bits may be set and others cleared. It is the caller's responsibility
-* to get the value of the register prior to setting the value to prevent a
-* destructive behavior.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* Status contains the value to be written to the interrupt status register of
-* the device. The only bits which can be written are the latched bits which
-* contain the internal IPIF conditions. The following values may be used to
-* set the status register or clear an interrupt condition.
-*
-* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_WRITE_DISR(RegBaseAddress, Status) \
- XIo_Out32((RegBaseAddress) + XIIF_V123B_DISR_OFFSET, (Status))
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_DISR
-*
-* DESCRIPTION:
-*
-* This function gets the device interrupt status register contents.
-* This register indicates the status of interrupt sources for a device
-* which contains the IPIF. The status is independent of whether interrupts
-* are enabled and could be used for polling a device at a higher level.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device which contains the IPIF. With the exception of some internal IPIF
-* conditions, the contents of this register are not latched but indicate
-* the live status of the interrupt sources within the device.
-*
-* For only the latched bits of this register, the interrupt may be cleared by
-* writing to these bits in the status register.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* A status which contains the value read from the interrupt status register of
-* the device. The bit definitions are specific to the device with
-* the exception of the latched internal IPIF condition bits. The following
-* values may be used to detect internal IPIF conditions in the status.
-*
-* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_DISR(RegBaseAddress) \
- XIo_In32((RegBaseAddress) + XIIF_V123B_DISR_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_WRITE_DIER
-*
-* DESCRIPTION:
-*
-* This function sets the device interrupt enable register contents.
-* This register controls which interrupt sources of the device are allowed to
-* generate an interrupt. The device global interrupt enable register must also
-* be set appropriately for an interrupt to be passed out of the device.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device which contains the IPIF. Setting a bit in this register enables that
-* interrupt source to generate an interrupt. Clearing a bit in this register
-* disables interrupt generation for that interrupt source.
-*
-* This function writes only the specified value to the register such that
-* some interrupts source may be enabled and others disabled. It is the
-* caller's responsibility to get the value of the interrupt enable register
-* prior to setting the value to prevent an destructive behavior.
-*
-* An interrupt source may not be enabled to generate an interrupt, but can
-* still be polled in the interrupt status register.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* Enable contains the value to be written to the interrupt enable register
-* of the device. The bit definitions are specific to the device with
-* the exception of the internal IPIF conditions. The following
-* values may be used to enable the internal IPIF conditions interrupts.
-*
-* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* Signature: u32 XIIF_V123B_WRITE_DIER(u32 RegBaseAddress,
-* u32 Enable)
-*
-******************************************************************************/
-#define XIIF_V123B_WRITE_DIER(RegBaseAddress, Enable) \
- XIo_Out32((RegBaseAddress) + XIIF_V123B_DIER_OFFSET, (Enable))
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_DIER
-*
-* DESCRIPTION:
-*
-* This function gets the device interrupt enable register contents.
-* This register controls which interrupt sources of the device
-* are allowed to generate an interrupt. The device global interrupt enable
-* register and the device interrupt enable register must also be set
-* appropriately for an interrupt to be passed out of the device.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device which contains the IPIF. Setting a bit in this register enables that
-* interrupt source to generate an interrupt if the global enable is set
-* appropriately. Clearing a bit in this register disables interrupt generation
-* for that interrupt source regardless of the global interrupt enable.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* The value read from the interrupt enable register of the device. The bit
-* definitions are specific to the device with the exception of the internal
-* IPIF conditions. The following values may be used to determine from the
-* value if the internal IPIF conditions interrupts are enabled.
-*
-* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_DIER(RegBaseAddress) \
- XIo_In32((RegBaseAddress) + XIIF_V123B_DIER_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_DIPR
-*
-* DESCRIPTION:
-*
-* This function gets the device interrupt pending register contents.
-* This register indicates the pending interrupt sources, those that are waiting
-* to be serviced by the software, for a device which contains the IPIF.
-* An interrupt must be enabled in the interrupt enable register of the IPIF to
-* be pending.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* the device which contains the IPIF. With the exception of some internal IPIF
-* conditions, the contents of this register are not latched since the condition
-* is latched in the IP interrupt status register, by an internal block of the
-* IPIF such as a FIFO or DMA channel, or by the IP of the device. This register
-* is read only and is not latched, but it is necessary to acknowledge (clear)
-* the interrupt condition by performing the appropriate processing for the IP
-* or block within the IPIF.
-*
-* This register can be thought of as the contents of the interrupt status
-* register ANDed with the contents of the interrupt enable register.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* The value read from the interrupt pending register of the device. The bit
-* definitions are specific to the device with the exception of the latched
-* internal IPIF condition bits. The following values may be used to detect
-* internal IPIF conditions in the value.
-*
-* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_DIPR(RegBaseAddress) \
- XIo_In32((RegBaseAddress) + XIIF_V123B_DIPR_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_DIIR
-*
-* DESCRIPTION:
-*
-* This function gets the device interrupt ID for the highest priority interrupt
-* which is pending from the interrupt ID register. This function provides
-* priority resolution such that faster interrupt processing is possible.
-* Without priority resolution, it is necessary for the software to read the
-* interrupt pending register and then check each interrupt source to determine
-* if an interrupt is pending. Priority resolution becomes more important as the
-* number of interrupt sources becomes larger.
-*
-* Interrupt priorities are based upon the bit position of the interrupt in the
-* interrupt pending register with bit 0 being the highest priority. The
-* interrupt ID is the priority of the interrupt, 0 - 31, with 0 being the
-* highest priority. The interrupt ID register is live rather than latched such
-* that multiple calls to this function may not yield the same results. A
-* special value, outside of the interrupt priority range of 0 - 31, is
-* contained in the register which indicates that no interrupt is pending. This
-* may be useful for allowing software to continue processing interrupts in a
-* loop until there are no longer any interrupts pending.
-*
-* The interrupt ID is designed to allow a function pointer table to be used
-* in the software such that the interrupt ID is used as an index into that
-* table. The function pointer table could contain an instance pointer, such
-* as to DMA channel, and a function pointer to the function which handles
-* that interrupt. This design requires the interrupt processing of the device
-* driver to be partitioned into smaller more granular pieces based upon
-* hardware used by the device, such as DMA channels and FIFOs.
-*
-* It is not mandatory that this function be used by the device driver software.
-* It may choose to read the pending register and resolve the pending interrupt
-* priorities on it's own.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* An interrupt ID, 0 - 31, which identifies the highest priority interrupt
-* which is pending. A value of XIIF_NO_INTERRUPT_ID indicates that there is
-* no interrupt pending. The following values may be used to identify the
-* interrupt ID for the internal IPIF interrupts.
-*
-* XIIF_V123B_ERROR_INTERRUPT_ID Indicates a device error in the IPIF
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_DIIR(RegBaseAddress) \
- XIo_In32((RegBaseAddress) + XIIF_V123B_DIIR_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_GLOBAL_INTR_DISABLE
-*
-* DESCRIPTION:
-*
-* This function disables all interrupts for the device by writing to the global
-* interrupt enable register. This register provides the ability to disable
-* interrupts without any modifications to the interrupt enable register such
-* that it is minimal effort to restore the interrupts to the previous enabled
-* state. The corresponding function, XIpIf_GlobalIntrEnable, is provided to
-* restore the interrupts to the previous enabled state. This function is
-* designed to be used in critical sections of device drivers such that it is
-* not necessary to disable other device interrupts.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_GINTR_DISABLE(RegBaseAddress) \
- XIo_Out32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET, 0)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_GINTR_ENABLE
-*
-* DESCRIPTION:
-*
-* This function writes to the global interrupt enable register to enable
-* interrupts from the device. This register provides the ability to enable
-* interrupts without any modifications to the interrupt enable register such
-* that it is minimal effort to restore the interrupts to the previous enabled
-* state. This function does not enable individual interrupts as the interrupt
-* enable register must be set appropriately. This function is designed to be
-* used in critical sections of device drivers such that it is not necessary to
-* disable other device interrupts.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_GINTR_ENABLE(RegBaseAddress) \
- XIo_Out32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET, \
- XIIF_V123B_GINTR_ENABLE_MASK)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_IS_GINTR_ENABLED
-*
-* DESCRIPTION:
-*
-* This function determines if interrupts are enabled at the global level by
-* reading the gloabl interrupt register. This register provides the ability to
-* disable interrupts without any modifications to the interrupt enable register
-* such that it is minimal effort to restore the interrupts to the previous
-* enabled state.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* XTRUE if interrupts are enabled for the IPIF, XFALSE otherwise.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_IS_GINTR_ENABLED(RegBaseAddress) \
- (XIo_In32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET) == \
- XIIF_V123B_GINTR_ENABLE_MASK)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_WRITE_IISR
-*
-* DESCRIPTION:
-*
-* This function sets the IP interrupt status register to the specified value.
-* This register indicates the status of interrupt sources for the IP of the
-* device. The IP is defined as the part of the device that connects to the
-* IPIF. The status is independent of whether interrupts are enabled such that
-* the status register may also be polled when interrupts are not enabled.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* IP. All bits of this register are latched. Setting a bit which is zero
-* within this register causes an interrupt to be generated. The device global
-* interrupt enable register and the device interrupt enable register must be set
-* appropriately to allow an interrupt to be passed out of the device. The
-* interrupt is cleared by writing to this register with the bits to be
-* cleared set to a one and all others to zero. This register implements a
-* toggle on write functionality meaning any bits which are set in the value
-* written cause the bits in the register to change to the opposite state.
-*
-* This function writes only the specified value to the register such that
-* some status bits may be set and others cleared. It is the caller's
-* responsibility to get the value of the register prior to setting the value
-* to prevent an destructive behavior.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* Status contains the value to be written to the IP interrupt status
-* register. The bit definitions are specific to the device IP.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_WRITE_IISR(RegBaseAddress, Status) \
- XIo_Out32((RegBaseAddress) + XIIF_V123B_IISR_OFFSET, (Status))
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_IISR
-*
-* DESCRIPTION:
-*
-* This function gets the contents of the IP interrupt status register.
-* This register indicates the status of interrupt sources for the IP of the
-* device. The IP is defined as the part of the device that connects to the
-* IPIF. The status is independent of whether interrupts are enabled such
-* that the status register may also be polled when interrupts are not enabled.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device. All bits of this register are latched. Writing a 1 to a bit within
-* this register causes an interrupt to be generated if enabled in the interrupt
-* enable register and the global interrupt enable is set. Since the status is
-* latched, each status bit must be acknowledged in order for the bit in the
-* status register to be updated. Each bit can be acknowledged by writing a
-* 0 to the bit in the status register.
-
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* A status which contains the value read from the IP interrupt status register.
-* The bit definitions are specific to the device IP.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_IISR(RegBaseAddress) \
- XIo_In32((RegBaseAddress) + XIIF_V123B_IISR_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_WRITE_IIER
-*
-* DESCRIPTION:
-*
-* This function sets the IP interrupt enable register contents. This register
-* controls which interrupt sources of the IP are allowed to generate an
-* interrupt. The global interrupt enable register and the device interrupt
-* enable register must also be set appropriately for an interrupt to be
-* passed out of the device containing the IPIF and the IP.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* IP. Setting a bit in this register enables the interrupt source to generate
-* an interrupt. Clearing a bit in this register disables interrupt generation
-* for that interrupt source.
-*
-* This function writes only the specified value to the register such that
-* some interrupt sources may be enabled and others disabled. It is the
-* caller's responsibility to get the value of the interrupt enable register
-* prior to setting the value to prevent an destructive behavior.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* Enable contains the value to be written to the IP interrupt enable register.
-* The bit definitions are specific to the device IP.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_WRITE_IIER(RegBaseAddress, Enable) \
- XIo_Out32((RegBaseAddress) + XIIF_V123B_IIER_OFFSET, (Enable))
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_IIER
-*
-* DESCRIPTION:
-*
-*
-* This function gets the IP interrupt enable register contents. This register
-* controls which interrupt sources of the IP are allowed to generate an
-* interrupt. The global interrupt enable register and the device interrupt
-* enable register must also be set appropriately for an interrupt to be
-* passed out of the device containing the IPIF and the IP.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* IP. Setting a bit in this register enables the interrupt source to generate
-* an interrupt. Clearing a bit in this register disables interrupt generation
-* for that interrupt source.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* The contents read from the IP interrupt enable register. The bit definitions
-* are specific to the device IP.
-*
-* NOTES:
-*
-* Signature: u32 XIIF_V123B_READ_IIER(u32 RegBaseAddress)
-*
-******************************************************************************/
-#define XIIF_V123B_READ_IIER(RegBaseAddress) \
- XIo_In32((RegBaseAddress) + XIIF_V123B_IIER_OFFSET)
-
-/************************** Function Prototypes ******************************/
-
-/*
- * Initialization Functions
- */
-XStatus XIpIfV123b_SelfTest(u32 RegBaseAddress, u8 IpRegistersWidth);
-
-#endif /* end of protection macro */
+++ /dev/null
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/*
-*
-* @file xpacket_fifo_v1_00_b.c
-*
-* Contains functions for the XPacketFifoV100b component. See xpacket_fifo_v1_00_b.h
-* for more information about the component.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b rpm 03/26/02 First release
-* </pre>
-*
-*****************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xio.h"
-#include "xstatus.h"
-#include "xpacket_fifo_v1_00_b.h"
-
-/************************** Constant Definitions *****************************/
-
-/* width of a FIFO word */
-
-#define XPF_FIFO_WIDTH_BYTE_COUNT 4UL
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************* Variable Definitions ******************************/
-
-/************************** Function Prototypes ******************************/
-
-/*****************************************************************************/
-/*
-*
-* This function initializes a packet FIFO. Initialization resets the
-* FIFO such that it's empty and ready to use.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-* @param RegBaseAddress contains the base address of the registers for
-* the packet FIFO.
-* @param DataBaseAddress contains the base address of the data for
-* the packet FIFO.
-*
-* @return
-*
-* Always returns XST_SUCCESS.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XPacketFifoV100b_Initialize(XPacketFifoV100b * InstancePtr,
- u32 RegBaseAddress, u32 DataBaseAddress)
-{
- /* assert to verify input argument are valid */
-
- XASSERT_NONVOID(InstancePtr != NULL);
-
- /* initialize the component variables to the specified state */
-
- InstancePtr->RegBaseAddress = RegBaseAddress;
- InstancePtr->DataBaseAddress = DataBaseAddress;
- InstancePtr->IsReady = XCOMPONENT_IS_READY;
-
- /* reset the FIFO such that it's empty and ready to use and indicate the
- * initialization was successful, note that the is ready variable must be
- * set prior to calling the reset function to prevent an assert
- */
- XPF_V100B_RESET(InstancePtr);
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/*
-*
-* This function performs a self-test on the specified packet FIFO. The self
-* test resets the FIFO and reads a register to determine if it is the correct
-* reset value. This test is destructive in that any data in the FIFO will
-* be lost.
-*
-* @param InstancePtr is a pointer to the packet FIFO to be operated on.
-*
-* @param FifoType specifies the type of FIFO, read or write, for the self test.
-* The FIFO type is specified by the values XPF_READ_FIFO_TYPE or
-* XPF_WRITE_FIFO_TYPE.
-*
-* @return
-*
-* XST_SUCCESS is returned if the selftest is successful, or
-* XST_PFIFO_BAD_REG_VALUE indicating that the value readback from the
-* occupancy/vacancy count register after a reset does not match the
-* specified reset value.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XPacketFifoV100b_SelfTest(XPacketFifoV100b * InstancePtr, u32 FifoType)
-{
- u32 Register;
-
- /* assert to verify valid input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID((FifoType == XPF_READ_FIFO_TYPE) ||
- (FifoType == XPF_WRITE_FIFO_TYPE));
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* reset the fifo and then check to make sure the occupancy/vacancy
- * register contents are correct for a reset condition
- */
- XPF_V100B_RESET(InstancePtr);
-
- Register = XIo_In32(InstancePtr->RegBaseAddress +
- XPF_COUNT_STATUS_REG_OFFSET);
-
- /* check the value of the register to ensure that it's correct for the
- * specified FIFO type since both FIFO types reset to empty, but a bit
- * in the register changes definition based upon FIFO type
- */
-
- if (FifoType == XPF_READ_FIFO_TYPE) {
- /* check the regiser value for a read FIFO which should be empty */
-
- if (Register != XPF_EMPTY_FULL_MASK) {
- return XST_PFIFO_BAD_REG_VALUE;
- }
- } else {
- /* check the register value for a write FIFO which should not be full
- * on reset
- */
- if ((Register & XPF_EMPTY_FULL_MASK) != 0) {
- return XST_PFIFO_BAD_REG_VALUE;
- }
- }
-
- /* the test was successful */
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/*
-*
-* Read data from a FIFO and puts it into a specified buffer. The packet FIFO is
-* currently 32 bits wide such that an input buffer which is a series of bytes
-* is filled from the FIFO a word at a time. If the requested byte count is not
-* a multiple of 32 bit words, it is necessary for this function to format the
-* remaining 32 bit word from the FIFO into a series of bytes in the buffer.
-* There may be up to 3 extra bytes which must be extracted from the last word
-* of the FIFO and put into the buffer.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-* @param BufferPtr points to the memory buffer to write the data into. This
-* buffer must be 32 bit aligned or an alignment exception could be
-* generated. Since this buffer is a byte buffer, the data is assumed to
-* be endian independent.
-* @param ByteCount contains the number of bytes to read from the FIFO. This
-* number of bytes must be present in the FIFO or an error will be
-* returned.
-*
-* @return
-*
-* XST_SUCCESS indicates the operation was successful. If the number of
-* bytes specified by the byte count is not present in the FIFO
-* XST_PFIFO_LACK_OF_DATA is returned.
-*
-* If the function was successful, the specified buffer is modified to contain
-* the bytes which were removed from the FIFO.
-*
-* @note
-*
-* Note that the exact number of bytes which are present in the FIFO is
-* not known by this function. It can only check for a number of 32 bit
-* words such that if the byte count specified is incorrect, but is still
-* possible based on the number of words in the FIFO, up to 3 garbage bytes
-* may be present at the end of the buffer.
-* <br><br>
-* This function assumes that if the device consuming data from the FIFO is
-* a byte device, the order of the bytes to be consumed is from the most
-* significant byte to the least significant byte of a 32 bit word removed
-* from the FIFO.
-*
-******************************************************************************/
-XStatus
-XPacketFifoV100b_Read(XPacketFifoV100b * InstancePtr,
- u8 * BufferPtr, u32 ByteCount)
-{
- u32 FifoCount;
- u32 WordCount;
- u32 ExtraByteCount;
- u32 *WordBuffer = (u32 *) BufferPtr;
-
- /* assert to verify valid input arguments including 32 bit alignment of
- * the buffer pointer
- */
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(BufferPtr != NULL);
- XASSERT_NONVOID(((u32) BufferPtr &
- (XPF_FIFO_WIDTH_BYTE_COUNT - 1)) == 0);
- XASSERT_NONVOID(ByteCount != 0);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* get the count of how many 32 bit words are in the FIFO, if there aren't
- * enought words to satisfy the request, return an error
- */
-
- FifoCount = XIo_In32(InstancePtr->RegBaseAddress +
- XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
-
- if ((FifoCount * XPF_FIFO_WIDTH_BYTE_COUNT) < ByteCount) {
- return XST_PFIFO_LACK_OF_DATA;
- }
-
- /* calculate the number of words to read from the FIFO before the word
- * containing the extra bytes, and calculate the number of extra bytes
- * the extra bytes are defined as those at the end of the buffer when
- * the buffer does not end on a 32 bit boundary
- */
- WordCount = ByteCount / XPF_FIFO_WIDTH_BYTE_COUNT;
- ExtraByteCount = ByteCount % XPF_FIFO_WIDTH_BYTE_COUNT;
-
- /* Read the 32 bit words from the FIFO for all the buffer except the
- * last word which contains the extra bytes, the following code assumes
- * that the buffer is 32 bit aligned, otherwise an alignment exception could
- * be generated
- */
- for (FifoCount = 0; FifoCount < WordCount; FifoCount++) {
- WordBuffer[FifoCount] = XIo_In32(InstancePtr->DataBaseAddress);
- }
-
- /* if there are extra bytes to handle, read the last word from the FIFO
- * and insert the extra bytes into the buffer
- */
- if (ExtraByteCount > 0) {
- u32 LastWord;
- u8 *ExtraBytesBuffer = (u8 *) (WordBuffer + WordCount);
-
- /* get the last word from the FIFO for the extra bytes */
-
- LastWord = XIo_In32(InstancePtr->DataBaseAddress);
-
- /* one extra byte in the last word, put the byte into the next location
- * of the buffer, bytes in a word of the FIFO are ordered from most
- * significant byte to least
- */
- if (ExtraByteCount == 1) {
- ExtraBytesBuffer[0] = (u8) (LastWord >> 24);
- }
-
- /* two extra bytes in the last word, put each byte into the next two
- * locations of the buffer
- */
- else if (ExtraByteCount == 2) {
- ExtraBytesBuffer[0] = (u8) (LastWord >> 24);
- ExtraBytesBuffer[1] = (u8) (LastWord >> 16);
- }
- /* three extra bytes in the last word, put each byte into the next three
- * locations of the buffer
- */
- else if (ExtraByteCount == 3) {
- ExtraBytesBuffer[0] = (u8) (LastWord >> 24);
- ExtraBytesBuffer[1] = (u8) (LastWord >> 16);
- ExtraBytesBuffer[2] = (u8) (LastWord >> 8);
- }
- }
- return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/*
-*
-* Write data into a packet FIFO. The packet FIFO is currently 32 bits wide
-* such that an input buffer which is a series of bytes must be written into the
-* FIFO a word at a time. If the buffer is not a multiple of 32 bit words, it is
-* necessary for this function to format the remaining bytes into a single 32
-* bit word to be inserted into the FIFO. This is necessary to avoid any
-* accesses past the end of the buffer.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-* @param BufferPtr points to the memory buffer that data is to be read from
-* and written into the FIFO. Since this buffer is a byte buffer, the data
-* is assumed to be endian independent. This buffer must be 32 bit aligned
-* or an alignment exception could be generated.
-* @param ByteCount contains the number of bytes to read from the buffer and to
-* write to the FIFO.
-*
-* @return
-*
-* XST_SUCCESS is returned if the operation succeeded. If there is not enough
-* room in the FIFO to hold the specified bytes, XST_PFIFO_NO_ROOM is
-* returned.
-*
-* @note
-*
-* This function assumes that if the device inserting data into the FIFO is
-* a byte device, the order of the bytes in each 32 bit word is from the most
-* significant byte to the least significant byte.
-*
-******************************************************************************/
-XStatus
-XPacketFifoV100b_Write(XPacketFifoV100b * InstancePtr,
- u8 * BufferPtr, u32 ByteCount)
-{
- u32 FifoCount;
- u32 WordCount;
- u32 ExtraByteCount;
- u32 *WordBuffer = (u32 *) BufferPtr;
-
- /* assert to verify valid input arguments including 32 bit alignment of
- * the buffer pointer
- */
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(BufferPtr != NULL);
- XASSERT_NONVOID(((u32) BufferPtr &
- (XPF_FIFO_WIDTH_BYTE_COUNT - 1)) == 0);
- XASSERT_NONVOID(ByteCount != 0);
- XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
- /* get the count of how many words may be inserted into the FIFO */
-
- FifoCount = XIo_In32(InstancePtr->RegBaseAddress +
- XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
-
- /* Calculate the number of 32 bit words required to insert the specified
- * number of bytes in the FIFO and determine the number of extra bytes
- * if the buffer length is not a multiple of 32 bit words
- */
-
- WordCount = ByteCount / XPF_FIFO_WIDTH_BYTE_COUNT;
- ExtraByteCount = ByteCount % XPF_FIFO_WIDTH_BYTE_COUNT;
-
- /* take into account the extra bytes in the total word count */
-
- if (ExtraByteCount > 0) {
- WordCount++;
- }
-
- /* if there's not enough room in the FIFO to hold the specified
- * number of bytes, then indicate an error,
- */
- if (FifoCount < WordCount) {
- return XST_PFIFO_NO_ROOM;
- }
-
- /* readjust the word count to not take into account the extra bytes */
-
- if (ExtraByteCount > 0) {
- WordCount--;
- }
-
- /* Write all the bytes of the buffer which can be written as 32 bit
- * words into the FIFO, waiting to handle the extra bytes seperately
- */
- for (FifoCount = 0; FifoCount < WordCount; FifoCount++) {
- XIo_Out32(InstancePtr->DataBaseAddress, WordBuffer[FifoCount]);
- }
-
- /* if there are extra bytes to handle, extract them from the buffer
- * and create a 32 bit word and write it to the FIFO
- */
- if (ExtraByteCount > 0) {
- u32 LastWord = 0;
- u8 *ExtraBytesBuffer = (u8 *) (WordBuffer + WordCount);
-
- /* one extra byte in the buffer, put the byte into the last word
- * to be inserted into the FIFO, perform this processing inline rather
- * than in a loop to help performance
- */
- if (ExtraByteCount == 1) {
- LastWord = ExtraBytesBuffer[0] << 24;
- }
-
- /* two extra bytes in the buffer, put each byte into the last word
- * to be inserted into the FIFO
- */
- else if (ExtraByteCount == 2) {
- LastWord = ExtraBytesBuffer[0] << 24 |
- ExtraBytesBuffer[1] << 16;
- }
-
- /* three extra bytes in the buffer, put each byte into the last word
- * to be inserted into the FIFO
- */
- else if (ExtraByteCount == 3) {
- LastWord = ExtraBytesBuffer[0] << 24 |
- ExtraBytesBuffer[1] << 16 |
- ExtraBytesBuffer[2] << 8;
- }
-
- /* write the last 32 bit word to the FIFO and return with no errors */
-
- XIo_Out32(InstancePtr->DataBaseAddress, LastWord);
- }
-
- return XST_SUCCESS;
-}
+++ /dev/null
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/*
-*
-* @file xpacket_fifo_v1_00_b.h
-*
-* This component is a common component because it's primary purpose is to
-* prevent code duplication in drivers. A driver which must handle a packet
-* FIFO uses this component rather than directly manipulating a packet FIFO.
-*
-* A FIFO is a device which has dual port memory such that one user may be
-* inserting data into the FIFO while another is consuming data from the FIFO.
-* A packet FIFO is designed for use with packet protocols such as Ethernet and
-* ATM. It is typically only used with devices when DMA and/or Scatter Gather
-* is used. It differs from a nonpacket FIFO in that it does not provide any
-* interrupts for thresholds of the FIFO such that it is less useful without
-* DMA.
-*
-* @note
-*
-* This component has the capability to generate an interrupt when an error
-* condition occurs. It is the user's responsibility to provide the interrupt
-* processing to handle the interrupt. This component provides the ability to
-* determine if that interrupt is active, a deadlock condition, and the ability
-* to reset the FIFO to clear the condition. In this condition, the device which
-* is using the FIFO should also be reset to prevent other problems. This error
-* condition could occur as a normal part of operation if the size of the FIFO
-* is not setup correctly. See the hardware IP specification for more details.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b rpm 03/26/02 First release
-* </pre>
-*
-*****************************************************************************/
-#ifndef XPACKET_FIFO_H /* prevent circular inclusions */
-#define XPACKET_FIFO_H /* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xstatus.h"
-
-/************************** Constant Definitions *****************************/
-
-/*
- * These constants specify the FIFO type and are mutually exclusive
- */
-#define XPF_READ_FIFO_TYPE 0 /* a read FIFO */
-#define XPF_WRITE_FIFO_TYPE 1 /* a write FIFO */
-
-/*
- * These constants define the offsets to each of the registers from the
- * register base address, each of the constants are a number of bytes
- */
-#define XPF_RESET_REG_OFFSET 0UL
-#define XPF_MODULE_INFO_REG_OFFSET 0UL
-#define XPF_COUNT_STATUS_REG_OFFSET 4UL
-
-/*
- * This constant is used with the Reset Register
- */
-#define XPF_RESET_FIFO_MASK 0x0000000A
-
-/*
- * These constants are used with the Occupancy/Vacancy Count Register. This
- * register also contains FIFO status
- */
-#define XPF_COUNT_MASK 0x0000FFFF
-#define XPF_DEADLOCK_MASK 0x20000000
-#define XPF_ALMOST_EMPTY_FULL_MASK 0x40000000
-#define XPF_EMPTY_FULL_MASK 0x80000000
-
-/**************************** Type Definitions *******************************/
-
-/*
- * The XPacketFifo driver instance data. The driver is required to allocate a
- * variable of this type for every packet FIFO in the device.
- */
-typedef struct {
- u32 RegBaseAddress; /* Base address of registers */
- u32 IsReady; /* Device is initialized and ready */
- u32 DataBaseAddress; /* Base address of data for FIFOs */
-} XPacketFifoV100b;
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************/
-/*
-*
-* Reset the specified packet FIFO. Resetting a FIFO will cause any data
-* contained in the FIFO to be lost.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XPF_V100B_RESET(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_RESET(InstancePtr) \
- XIo_Out32((InstancePtr)->RegBaseAddress + XPF_RESET_REG_OFFSET, XPF_RESET_FIFO_MASK);
-
-/*****************************************************************************/
-/*
-*
-* Get the occupancy count for a read packet FIFO and the vacancy count for a
-* write packet FIFO. These counts indicate the number of 32-bit words
-* contained (occupancy) in the FIFO or the number of 32-bit words available
-* to write (vacancy) in the FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* The occupancy or vacancy count for the specified packet FIFO.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_GET_COUNT(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_GET_COUNT(InstancePtr) \
- (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
- XPF_COUNT_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is almost empty. Almost empty is
-* defined for a read FIFO when there is only one data word in the FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is almost empty, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_ALMOST_EMPTY(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_ALMOST_EMPTY(InstancePtr) \
- (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
- XPF_ALMOST_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is almost full. Almost full is
-* defined for a write FIFO when there is only one available data word in the
-* FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is almost full, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_ALMOST_FULL(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_ALMOST_FULL(InstancePtr) \
- (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
- XPF_ALMOST_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is empty. This applies only to a
-* read FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is empty, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_EMPTY(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_EMPTY(InstancePtr) \
- (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
- XPF_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is full. This applies only to a
-* write FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is full, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_FULL(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_FULL(InstancePtr) \
- (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
- XPF_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is deadlocked. This condition occurs
-* when the FIFO is full and empty at the same time and is caused by a packet
-* being written to the FIFO which exceeds the total data capacity of the FIFO.
-* It occurs because of the mark/restore features of the packet FIFO which allow
-* retransmission of a packet. The software should reset the FIFO and any devices
-* using the FIFO when this condition occurs.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is deadlocked, FALSE otherwise.
-*
-* @note
-*
-* This component has the capability to generate an interrupt when an error
-* condition occurs. It is the user's responsibility to provide the interrupt
-* processing to handle the interrupt. This function provides the ability to
-* determine if a deadlock condition, and the ability to reset the FIFO to
-* clear the condition.
-*
-* In this condition, the device which is using the FIFO should also be reset
-* to prevent other problems. This error condition could occur as a normal part
-* of operation if the size of the FIFO is not setup correctly.
-*
-* Signature: u32 XPF_V100B_IS_DEADLOCKED(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_DEADLOCKED(InstancePtr) \
- (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
- XPF_DEADLOCK_MASK)
-
-/************************** Function Prototypes ******************************/
-
-/* Standard functions */
-
-XStatus XPacketFifoV100b_Initialize(XPacketFifoV100b * InstancePtr,
- u32 RegBaseAddress, u32 DataBaseAddress);
-XStatus XPacketFifoV100b_SelfTest(XPacketFifoV100b * InstancePtr, u32 FifoType);
-
-/* Data functions */
-
-XStatus XPacketFifoV100b_Read(XPacketFifoV100b * InstancePtr,
- u8 * ReadBufferPtr, u32 ByteCount);
-XStatus XPacketFifoV100b_Write(XPacketFifoV100b * InstancePtr,
- u8 * WriteBufferPtr, u32 ByteCount);
-
-#endif /* end of protection macro */
+++ /dev/null
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xstatus.h
-*
-* This file contains Xilinx software status codes. Status codes have their
-* own data type called XStatus. These codes are used throughout the Xilinx
-* device drivers.
-*
-******************************************************************************/
-
-#ifndef XSTATUS_H /* prevent circular inclusions */
-#define XSTATUS_H /* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-
-/************************** Constant Definitions *****************************/
-
-/*********************** Common statuses 0 - 500 *****************************/
-
-#define XST_SUCCESS 0L
-#define XST_FAILURE 1L
-#define XST_DEVICE_NOT_FOUND 2L
-#define XST_DEVICE_BLOCK_NOT_FOUND 3L
-#define XST_INVALID_VERSION 4L
-#define XST_DEVICE_IS_STARTED 5L
-#define XST_DEVICE_IS_STOPPED 6L
-#define XST_FIFO_ERROR 7L /* an error occurred during an
- operation with a FIFO such as
- an underrun or overrun, this
- error requires the device to
- be reset */
-#define XST_RESET_ERROR 8L /* an error occurred which requires
- the device to be reset */
-#define XST_DMA_ERROR 9L /* a DMA error occurred, this error
- typically requires the device
- using the DMA to be reset */
-#define XST_NOT_POLLED 10L /* the device is not configured for
- polled mode operation */
-#define XST_FIFO_NO_ROOM 11L /* a FIFO did not have room to put
- the specified data into */
-#define XST_BUFFER_TOO_SMALL 12L /* the buffer is not large enough
- to hold the expected data */
-#define XST_NO_DATA 13L /* there was no data available */
-#define XST_REGISTER_ERROR 14L /* a register did not contain the
- expected value */
-#define XST_INVALID_PARAM 15L /* an invalid parameter was passed
- into the function */
-#define XST_NOT_SGDMA 16L /* the device is not configured for
- scatter-gather DMA operation */
-#define XST_LOOPBACK_ERROR 17L /* a loopback test failed */
-#define XST_NO_CALLBACK 18L /* a callback has not yet been
- * registered */
-#define XST_NO_FEATURE 19L /* device is not configured with
- * the requested feature */
-#define XST_NOT_INTERRUPT 20L /* device is not configured for
- * interrupt mode operation */
-#define XST_DEVICE_BUSY 21L /* device is busy */
-#define XST_ERROR_COUNT_MAX 22L /* the error counters of a device
- * have maxed out */
-#define XST_IS_STARTED 23L /* used when part of device is
- * already started i.e.
- * sub channel */
-#define XST_IS_STOPPED 24L /* used when part of device is
- * already stopped i.e.
- * sub channel */
-
-/***************** Utility Component statuses 401 - 500 *********************/
-
-#define XST_MEMTEST_FAILED 401L /* memory test failed */
-
-/***************** Common Components statuses 501 - 1000 *********************/
-
-/********************* Packet Fifo statuses 501 - 510 ************************/
-
-#define XST_PFIFO_LACK_OF_DATA 501L /* not enough data in FIFO */
-#define XST_PFIFO_NO_ROOM 502L /* not enough room in FIFO */
-#define XST_PFIFO_BAD_REG_VALUE 503L /* self test, a register value
- was invalid after reset */
-
-/************************** DMA statuses 511 - 530 ***************************/
-
-#define XST_DMA_TRANSFER_ERROR 511L /* self test, DMA transfer
- failed */
-#define XST_DMA_RESET_REGISTER_ERROR 512L /* self test, a register value
- was invalid after reset */
-#define XST_DMA_SG_LIST_EMPTY 513L /* scatter gather list contains
- no buffer descriptors ready
- to be processed */
-#define XST_DMA_SG_IS_STARTED 514L /* scatter gather not stopped */
-#define XST_DMA_SG_IS_STOPPED 515L /* scatter gather not running */
-#define XST_DMA_SG_LIST_FULL 517L /* all the buffer desciptors of
- the scatter gather list are
- being used */
-#define XST_DMA_SG_BD_LOCKED 518L /* the scatter gather buffer
- descriptor which is to be
- copied over in the scatter
- list is locked */
-#define XST_DMA_SG_NOTHING_TO_COMMIT 519L /* no buffer descriptors have been
- put into the scatter gather
- list to be commited */
-#define XST_DMA_SG_COUNT_EXCEEDED 521L /* the packet count threshold
- specified was larger than the
- total # of buffer descriptors
- in the scatter gather list */
-#define XST_DMA_SG_LIST_EXISTS 522L /* the scatter gather list has
- already been created */
-#define XST_DMA_SG_NO_LIST 523L /* no scatter gather list has
- been created */
-#define XST_DMA_SG_BD_NOT_COMMITTED 524L /* the buffer descriptor which was
- being started was not committed
- to the list */
-#define XST_DMA_SG_NO_DATA 525L /* the buffer descriptor to start
- has already been used by the
- hardware so it can't be reused
- */
-
-/************************** IPIF statuses 531 - 550 ***************************/
-
-#define XST_IPIF_REG_WIDTH_ERROR 531L /* an invalid register width
- was passed into the function */
-#define XST_IPIF_RESET_REGISTER_ERROR 532L /* the value of a register at
- reset was not valid */
-#define XST_IPIF_DEVICE_STATUS_ERROR 533L /* a write to the device interrupt
- status register did not read
- back correctly */
-#define XST_IPIF_DEVICE_ACK_ERROR 534L /* the device interrupt status
- register did not reset when
- acked */
-#define XST_IPIF_DEVICE_ENABLE_ERROR 535L /* the device interrupt enable
- register was not updated when
- other registers changed */
-#define XST_IPIF_IP_STATUS_ERROR 536L /* a write to the IP interrupt
- status register did not read
- back correctly */
-#define XST_IPIF_IP_ACK_ERROR 537L /* the IP interrupt status register
- did not reset when acked */
-#define XST_IPIF_IP_ENABLE_ERROR 538L /* IP interrupt enable register was
- not updated correctly when other
- registers changed */
-#define XST_IPIF_DEVICE_PENDING_ERROR 539L /* The device interrupt pending
- register did not indicate the
- expected value */
-#define XST_IPIF_DEVICE_ID_ERROR 540L /* The device interrupt ID register
- did not indicate the expected
- value */
-
-/****************** Device specific statuses 1001 - 4095 *********************/
-
-/********************* Ethernet statuses 1001 - 1050 *************************/
-
-#define XST_EMAC_MEMORY_SIZE_ERROR 1001L /* Memory space is not big enough
- * to hold the minimum number of
- * buffers or descriptors */
-#define XST_EMAC_MEMORY_ALLOC_ERROR 1002L /* Memory allocation failed */
-#define XST_EMAC_MII_READ_ERROR 1003L /* MII read error */
-#define XST_EMAC_MII_BUSY 1004L /* An MII operation is in progress */
-#define XST_EMAC_OUT_OF_BUFFERS 1005L /* Adapter is out of buffers */
-#define XST_EMAC_PARSE_ERROR 1006L /* Invalid adapter init string */
-#define XST_EMAC_COLLISION_ERROR 1007L /* Excess deferral or late
- * collision on polled send */
-
-/*********************** UART statuses 1051 - 1075 ***************************/
-#define XST_UART
-
-#define XST_UART_INIT_ERROR 1051L
-#define XST_UART_START_ERROR 1052L
-#define XST_UART_CONFIG_ERROR 1053L
-#define XST_UART_TEST_FAIL 1054L
-#define XST_UART_BAUD_ERROR 1055L
-#define XST_UART_BAUD_RANGE 1056L
-
-/************************ IIC statuses 1076 - 1100 ***************************/
-
-#define XST_IIC_SELFTEST_FAILED 1076 /* self test failed */
-#define XST_IIC_BUS_BUSY 1077 /* bus found busy */
-#define XST_IIC_GENERAL_CALL_ADDRESS 1078 /* mastersend attempted with */
- /* general call address */
-#define XST_IIC_STAND_REG_RESET_ERROR 1079 /* A non parameterizable reg */
- /* value after reset not valid */
-#define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080 /* Tx fifo included in design */
- /* value after reset not valid */
-#define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081 /* Rx fifo included in design */
- /* value after reset not valid */
-#define XST_IIC_TBA_REG_RESET_ERROR 1082 /* 10 bit addr incl in design */
- /* value after reset not valid */
-#define XST_IIC_CR_READBACK_ERROR 1083 /* Read of the control register */
- /* didn't return value written */
-#define XST_IIC_DTR_READBACK_ERROR 1084 /* Read of the data Tx reg */
- /* didn't return value written */
-#define XST_IIC_DRR_READBACK_ERROR 1085 /* Read of the data Receive reg */
- /* didn't return value written */
-#define XST_IIC_ADR_READBACK_ERROR 1086 /* Read of the data Tx reg */
- /* didn't return value written */
-#define XST_IIC_TBA_READBACK_ERROR 1087 /* Read of the 10 bit addr reg */
- /* didn't return written value */
-#define XST_IIC_NOT_SLAVE 1088 /* The device isn't a slave */
-
-/*********************** ATMC statuses 1101 - 1125 ***************************/
-
-#define XST_ATMC_ERROR_COUNT_MAX 1101L /* the error counters in the ATM
- controller hit the max value
- which requires the statistics
- to be cleared */
-
-/*********************** Flash statuses 1126 - 1150 **************************/
-
-#define XST_FLASH_BUSY 1126L /* Flash is erasing or programming */
-#define XST_FLASH_READY 1127L /* Flash is ready for commands */
-#define XST_FLASH_ERROR 1128L /* Flash had detected an internal
- error. Use XFlash_DeviceControl
- to retrieve device specific codes */
-#define XST_FLASH_ERASE_SUSPENDED 1129L /* Flash is in suspended erase state */
-#define XST_FLASH_WRITE_SUSPENDED 1130L /* Flash is in suspended write state */
-#define XST_FLASH_PART_NOT_SUPPORTED 1131L /* Flash type not supported by
- driver */
-#define XST_FLASH_NOT_SUPPORTED 1132L /* Operation not supported */
-#define XST_FLASH_TOO_MANY_REGIONS 1133L /* Too many erase regions */
-#define XST_FLASH_TIMEOUT_ERROR 1134L /* Programming or erase operation
- aborted due to a timeout */
-#define XST_FLASH_ADDRESS_ERROR 1135L /* Accessed flash outside its
- addressible range */
-#define XST_FLASH_ALIGNMENT_ERROR 1136L /* Write alignment error */
-#define XST_FLASH_BLOCKING_CALL_ERROR 1137L /* Couldn't return immediately from
- write/erase function with
- XFL_NON_BLOCKING_WRITE/ERASE
- option cleared */
-#define XST_FLASH_CFI_QUERY_ERROR 1138L /* Failed to query the device */
-
-/*********************** SPI statuses 1151 - 1175 ****************************/
-
-#define XST_SPI_MODE_FAULT 1151 /* master was selected as slave */
-#define XST_SPI_TRANSFER_DONE 1152 /* data transfer is complete */
-#define XST_SPI_TRANSMIT_UNDERRUN 1153 /* slave underruns transmit register */
-#define XST_SPI_RECEIVE_OVERRUN 1154 /* device overruns receive register */
-#define XST_SPI_NO_SLAVE 1155 /* no slave has been selected yet */
-#define XST_SPI_TOO_MANY_SLAVES 1156 /* more than one slave is being
- * selected */
-#define XST_SPI_NOT_MASTER 1157 /* operation is valid only as master */
-#define XST_SPI_SLAVE_ONLY 1158 /* device is configured as slave-only */
-#define XST_SPI_SLAVE_MODE_FAULT 1159 /* slave was selected while disabled */
-
-/********************** OPB Arbiter statuses 1176 - 1200 *********************/
-
-#define XST_OPBARB_INVALID_PRIORITY 1176 /* the priority registers have either
- * one master assigned to two or more
- * priorities, or one master not
- * assigned to any priority
- */
-#define XST_OPBARB_NOT_SUSPENDED 1177 /* an attempt was made to modify the
- * priority levels without first
- * suspending the use of priority
- * levels
- */
-#define XST_OPBARB_PARK_NOT_ENABLED 1178 /* bus parking by id was enabled but
- * bus parking was not enabled
- */
-#define XST_OPBARB_NOT_FIXED_PRIORITY 1179 /* the arbiter must be in fixed
- * priority mode to allow the
- * priorities to be changed
- */
-
-/************************ Intc statuses 1201 - 1225 **************************/
-
-#define XST_INTC_FAIL_SELFTEST 1201 /* self test failed */
-#define XST_INTC_CONNECT_ERROR 1202 /* interrupt already in use */
-
-/********************** TmrCtr statuses 1226 - 1250 **************************/
-
-#define XST_TMRCTR_TIMER_FAILED 1226 /* self test failed */
-
-/********************** WdtTb statuses 1251 - 1275 ***************************/
-
-#define XST_WDTTB_TIMER_FAILED 1251L
-
-/********************** PlbArb statuses 1276 - 1300 **************************/
-
-#define XST_PLBARB_FAIL_SELFTEST 1276L
-
-/********************** Plb2Opb statuses 1301 - 1325 *************************/
-
-#define XST_PLB2OPB_FAIL_SELFTEST 1301L
-
-/********************** Opb2Plb statuses 1326 - 1350 *************************/
-
-#define XST_OPB2PLB_FAIL_SELFTEST 1326L
-
-/********************** SysAce statuses 1351 - 1360 **************************/
-
-#define XST_SYSACE_NO_LOCK 1351L /* No MPU lock has been granted */
-
-/********************** PCI Bridge statuses 1361 - 1375 **********************/
-
-#define XST_PCI_INVALID_ADDRESS 1361L
-
-/**************************** Type Definitions *******************************/
-
-/**
- * The status typedef.
- */
-typedef u32 XStatus;
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-#endif /* end of protection macro */
+++ /dev/null
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************
-*
-* This file contains the implementation of the XVersion component. This
-* component represents a version ID. It is encapsulated within a component
-* so that it's type and implementation can change without affecting users of
-* it.
-*
-* The version is formatted as X.YYZ where X = 0 - 9, Y = 00 - 99, Z = a - z
-* X is the major revision, YY is the minor revision, and Z is the
-* compatability revision.
-*
-* Packed versions are also utilized for the configuration ROM such that
-* memory is minimized. A packed version consumes only 16 bits and is
-* formatted as follows.
-*
-* <pre>
-* Revision Range Bit Positions
-*
-* Major Revision 0 - 9 Bits 15 - 12
-* Minor Revision 0 - 99 Bits 11 - 5
-* Compatability Revision a - z Bits 4 - 0
-</pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xversion.h"
-
-/************************** Constant Definitions *****************************/
-
-/* the following constants define the masks and shift values to allow the
- * revisions to be packed and unpacked, a packed version is packed into a 16
- * bit value in the following format, XXXXYYYYYYYZZZZZ, where XXXX is the
- * major revision, YYYYYYY is the minor revision, and ZZZZZ is the compatability
- * revision
- */
-#define XVE_MAJOR_SHIFT_VALUE 12
-#define XVE_MINOR_ONLY_MASK 0x0FE0
-#define XVE_MINOR_SHIFT_VALUE 5
-#define XVE_COMP_ONLY_MASK 0x001F
-
-/* the following constants define the specific characters of a version string
- * for each character of the revision, a version string is in the following
- * format, "X.YYZ" where X is the major revision (0 - 9), YY is the minor
- * revision (00 - 99), and Z is the compatability revision (a - z)
- */
-#define XVE_MAJOR_CHAR 0 /* major revision 0 - 9 */
-#define XVE_MINOR_TENS_CHAR 2 /* minor revision tens 0 - 9 */
-#define XVE_MINOR_ONES_CHAR 3 /* minor revision ones 0 - 9 */
-#define XVE_COMP_CHAR 4 /* compatability revision a - z */
-#define XVE_END_STRING_CHAR 5
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-static u32 IsVersionStringValid(s8 * StringPtr);
-
-/*****************************************************************************
-*
-* Unpacks a packed version into the specified version. Versions are packed
-* into the configuration ROM to reduce the amount storage. A packed version
-* is a binary format as oppossed to a non-packed version which is implemented
-* as a string.
-*
-* @param InstancePtr points to the version to unpack the packed version into.
-* @param PackedVersion contains the packed version to unpack.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XVersion_UnPack(XVersion * InstancePtr, u16 PackedVersion)
-{
- /* not implemented yet since CROM related */
-}
-
-/*****************************************************************************
-*
-* Packs a version into the specified packed version. Versions are packed into
-* the configuration ROM to reduce the amount storage.
-*
-* @param InstancePtr points to the version to pack.
-* @param PackedVersionPtr points to the packed version which will receive
-* the new packed version.
-*
-* @return
-*
-* A status, XST_SUCCESS, indicating the packing was accomplished
-* successfully, or an error, XST_INVALID_VERSION, indicating the specified
-* input version was not valid such that the pack did not occur
-* <br><br>
-* The packed version pointed to by PackedVersionPtr is modified with the new
-* packed version if the status indicates success.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XVersion_Pack(XVersion * InstancePtr, u16 * PackedVersionPtr)
-{
- /* not implemented yet since CROM related */
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************
-*
-* Determines if two versions are equal.
-*
-* @param InstancePtr points to the first version to be compared.
-* @param VersionPtr points to a second version to be compared.
-*
-* @return
-*
-* TRUE if the versions are equal, FALSE otherwise.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-u32
-XVersion_IsEqual(XVersion * InstancePtr, XVersion * VersionPtr)
-{
- u8 *Version1 = (u8 *) InstancePtr;
- u8 *Version2 = (u8 *) VersionPtr;
- int Index;
-
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(VersionPtr != NULL);
-
- /* check each byte of the versions to see if they are the same,
- * return at any point a byte differs between them
- */
- for (Index = 0; Index < sizeof (XVersion); Index++) {
- if (Version1[Index] != Version2[Index]) {
- return FALSE;
- }
- }
-
- /* No byte was found to be different between the versions, so indicate
- * the versions are equal
- */
- return TRUE;
-}
-
-/*****************************************************************************
-*
-* Converts a version to a null terminated string.
-*
-* @param InstancePtr points to the version to convert.
-* @param StringPtr points to the string which will be the result of the
-* conversion. This does not need to point to a null terminated
-* string as an input, but must point to storage which is an adequate
-* amount to hold the result string.
-*
-* @return
-*
-* The null terminated string is inserted at the location pointed to by
-* StringPtr if the status indicates success.
-*
-* @note
-*
-* It is necessary for the caller to have already allocated the storage to
-* contain the string. The amount of memory necessary for the string is
-* specified in the version header file.
-*
-******************************************************************************/
-void
-XVersion_ToString(XVersion * InstancePtr, s8 * StringPtr)
-{
- /* assert to verify input arguments */
-
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(StringPtr != NULL);
-
- /* since version is implemented as a string, just copy the specified
- * input into the specified output
- */
- XVersion_Copy(InstancePtr, (XVersion *) StringPtr);
-}
-
-/*****************************************************************************
-*
-* Initializes a version from a null terminated string. Since the string may not
-* be a format which is compatible with the version, an error could occur.
-*
-* @param InstancePtr points to the version which is to be initialized.
-* @param StringPtr points to a null terminated string which will be
-* converted to a version. The format of the string must match the
-* version string format which is X.YYX where X = 0 - 9, YY = 00 - 99,
-* Z = a - z.
-*
-* @return
-*
-* A status, XST_SUCCESS, indicating the conversion was accomplished
-* successfully, or XST_INVALID_VERSION indicating the version string format
-* was not valid.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XVersion_FromString(XVersion * InstancePtr, s8 * StringPtr)
-{
- /* assert to verify input arguments */
-
- XASSERT_NONVOID(InstancePtr != NULL);
- XASSERT_NONVOID(StringPtr != NULL);
-
- /* if the version string specified is not valid, return an error */
-
- if (!IsVersionStringValid(StringPtr)) {
- return XST_INVALID_VERSION;
- }
-
- /* copy the specified string into the specified version and indicate the
- * conversion was successful
- */
- XVersion_Copy((XVersion *) StringPtr, InstancePtr);
-
- return XST_SUCCESS;
-}
-
-/*****************************************************************************
-*
-* Copies the contents of a version to another version.
-*
-* @param InstancePtr points to the version which is the source of data for
-* the copy operation.
-* @param VersionPtr points to another version which is the destination of
-* the copy operation.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XVersion_Copy(XVersion * InstancePtr, XVersion * VersionPtr)
-{
- u8 *Source = (u8 *) InstancePtr;
- u8 *Destination = (u8 *) VersionPtr;
- int Index;
-
- /* assert to verify input arguments */
-
- XASSERT_VOID(InstancePtr != NULL);
- XASSERT_VOID(VersionPtr != NULL);
-
- /* copy each byte of the source version to the destination version */
-
- for (Index = 0; Index < sizeof (XVersion); Index++) {
- Destination[Index] = Source[Index];
- }
-}
-
-/*****************************************************************************
-*
-* Determines if the specified version is valid.
-*
-* @param StringPtr points to the string to be validated.
-*
-* @return
-*
-* TRUE if the version string is a valid format, FALSE otherwise.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static u32
-IsVersionStringValid(s8 * StringPtr)
-{
- /* if the input string is not a valid format, "X.YYZ" where X = 0 - 9,
- * YY = 00 - 99, and Z = a - z, then indicate it's not valid
- */
- if ((StringPtr[XVE_MAJOR_CHAR] < '0') ||
- (StringPtr[XVE_MAJOR_CHAR] > '9') ||
- (StringPtr[XVE_MINOR_TENS_CHAR] < '0') ||
- (StringPtr[XVE_MINOR_TENS_CHAR] > '9') ||
- (StringPtr[XVE_MINOR_ONES_CHAR] < '0') ||
- (StringPtr[XVE_MINOR_ONES_CHAR] > '9') ||
- (StringPtr[XVE_COMP_CHAR] < 'a') ||
- (StringPtr[XVE_COMP_CHAR] > 'z')) {
- return FALSE;
- }
-
- return TRUE;
-}
+++ /dev/null
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************
-*
-* This file contains the interface for the XVersion component. This
-* component represents a version ID. It is encapsulated within a component
-* so that it's type and implementation can change without affecting users of
-* it.
-*
-* The version is formatted as X.YYZ where X = 0 - 9, Y = 00 - 99, Z = a - z
-* X is the major revision, YY is the minor revision, and Z is the
-* compatability revision.
-*
-* Packed versions are also utilized for the configuration ROM such that
-* memory is minimized. A packed version consumes only 16 bits and is
-* formatted as follows.
-*
-* <pre>
-* Revision Range Bit Positions
-*
-* Major Revision 0 - 9 Bits 15 - 12
-* Minor Revision 0 - 99 Bits 11 - 5
-* Compatability Revision a - z Bits 4 - 0
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XVERSION_H /* prevent circular inclusions */
-#define XVERSION_H /* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xstatus.h"
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/* the following data type is used to hold a null terminated version string
- * consisting of the following format, "X.YYX"
- */
-typedef s8 XVersion[6];
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-void XVersion_UnPack(XVersion * InstancePtr, u16 PackedVersion);
-
-XStatus XVersion_Pack(XVersion * InstancePtr, u16 * PackedVersion);
-
-u32 XVersion_IsEqual(XVersion * InstancePtr, XVersion * VersionPtr);
-
-void XVersion_ToString(XVersion * InstancePtr, s8 * StringPtr);
-
-XStatus XVersion_FromString(XVersion * InstancePtr, s8 * StringPtr);
-
-void XVersion_Copy(XVersion * InstancePtr, XVersion * VersionPtr);
-
-#endif /* end of protection macro */
return 0;
}
-#ifdef CONFIG_SYS_FSL_2
-void fsl_isr2 (void *arg) {
- volatile int num;
- *((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4)) =
- ++(*((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4)));
- GET (num, 2);
- NGET (num, 2);
- puts("*");
-}
-
-int fsl_init2 (void) {
- puts("fsl_init2\n");
- install_interrupt_handler (FSL_INTR_2, fsl_isr2, NULL);
- return 0;
-}
-#endif
-
void board_init(void)
{
gpio_init();
-#ifdef CONFIG_SYS_FSL_2
- fsl_init2();
-#endif
}
int board_eth_init(bd_t *bis)
+++ /dev/null
-/* $Id: xiic_l.c,v 1.2 2002/12/05 19:32:40 meinelte Exp $ */
-/******************************************************************************
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
-* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
-* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE.
-*
-* (c) Copyright 2002 Xilinx Inc.
-* All rights reserved.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xiic_l.c
-*
-* This file contains low-level driver functions that can be used to access the
-* device. The user should refer to the hardware device specification for more
-* details of the device operation.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- --- ------- -----------------------------------------------
-* 1.01b jhl 5/13/02 First release
-* 1.01b jhl 10/14/02 Corrected bug in the receive function, the setup of the
-* interrupt status mask was not being done in the loop such
-* that a read would sometimes fail on the last byte because
-* the transmit error which should have been ignored was
-* being used. This would leave an extra byte in the FIFO
-* and the bus throttled such that the next operation would
-* also fail. Also updated the receive function to not
-* disable the device after the last byte until after the
-* bus transitions to not busy which is more consistent
-* with the expected behavior.
-* 1.01c ecm 12/05/02 new rev
-* </pre>
-*
-****************************************************************************/
-
-/***************************** Include Files *******************************/
-
-#include "xbasic_types.h"
-#include "xio.h"
-#include "xipif_v1_23_b.h"
-#include "xiic_l.h"
-
-/************************** Constant Definitions ***************************/
-
-/**************************** Type Definitions *****************************/
-
-
-/***************** Macros (Inline Functions) Definitions *******************/
-
-
-/******************************************************************************
-*
-* This macro clears the specified interrupt in the IPIF interrupt status
-* register. It is non-destructive in that the register is read and only the
-* interrupt specified is cleared. Clearing an interrupt acknowledges it.
-*
-* @param BaseAddress contains the IPIF registers base address.
-*
-* @param InterruptMask contains the interrupts to be disabled
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XIic_mClearIisr(u32 BaseAddress,
-* u32 InterruptMask);
-*
-******************************************************************************/
-#define XIic_mClearIisr(BaseAddress, InterruptMask) \
- XIIF_V123B_WRITE_IISR((BaseAddress), \
- XIIF_V123B_READ_IISR(BaseAddress) & (InterruptMask))
-
-/******************************************************************************
-*
-* This macro sends the address for a 7 bit address during both read and write
-* operations. It takes care of the details to format the address correctly.
-* This macro is designed to be called internally to the drivers.
-*
-* @param SlaveAddress contains the address of the slave to send to.
-*
-* @param Operation indicates XIIC_READ_OPERATION or XIIC_WRITE_OPERATION
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XIic_mSend7BitAddr(u16 SlaveAddress, u8 Operation);
-*
-******************************************************************************/
-#define XIic_mSend7BitAddress(BaseAddress, SlaveAddress, Operation) \
-{ \
- u8 LocalAddr = (u8)(SlaveAddress << 1); \
- LocalAddr = (LocalAddr & 0xFE) | (Operation); \
- XIo_Out8(BaseAddress + XIIC_DTR_REG_OFFSET, LocalAddr); \
-}
-
-/************************** Function Prototypes ****************************/
-
-static unsigned RecvData (u32 BaseAddress, u8 * BufferPtr,
- unsigned ByteCount);
-static unsigned SendData (u32 BaseAddress, u8 * BufferPtr,
- unsigned ByteCount);
-
-/************************** Variable Definitions **************************/
-
-
-/****************************************************************************/
-/**
-* Receive data as a master on the IIC bus. This function receives the data
-* using polled I/O and blocks until the data has been received. It only
-* supports 7 bit addressing and non-repeated start modes of operation. The
-* user is responsible for ensuring the bus is not busy if multiple masters
-* are present on the bus.
-*
-* @param BaseAddress contains the base address of the IIC device.
-* @param Address contains the 7 bit IIC address of the device to send the
-* specified data to.
-* @param BufferPtr points to the data to be sent.
-* @param ByteCount is the number of bytes to be sent.
-*
-* @return
-*
-* The number of bytes received.
-*
-* @note
-*
-* None
-*
-******************************************************************************/
-unsigned XIic_Recv (u32 BaseAddress, u8 Address,
- u8 * BufferPtr, unsigned ByteCount)
-{
- u8 CntlReg;
- unsigned RemainingByteCount;
-
- /* Tx error is enabled incase the address (7 or 10) has no device to answer
- * with Ack. When only one byte of data, must set NO ACK before address goes
- * out therefore Tx error must not be enabled as it will go off immediately
- * and the Rx full interrupt will be checked. If full, then the one byte
- * was received and the Tx error will be disabled without sending an error
- * callback msg.
- */
- XIic_mClearIisr (BaseAddress,
- XIIC_INTR_RX_FULL_MASK | XIIC_INTR_TX_ERROR_MASK |
- XIIC_INTR_ARB_LOST_MASK);
-
- /* Set receive FIFO occupancy depth for 1 byte (zero based)
- */
- XIo_Out8 (BaseAddress + XIIC_RFD_REG_OFFSET, 0);
-
- /* 7 bit slave address, send the address for a read operation
- * and set the state to indicate the address has been sent
- */
- XIic_mSend7BitAddress (BaseAddress, Address, XIIC_READ_OPERATION);
-
- /* MSMS gets set after putting data in FIFO. Start the master receive
- * operation by setting CR Bits MSMS to Master, if the buffer is only one
- * byte, then it should not be acknowledged to indicate the end of data
- */
- CntlReg = XIIC_CR_MSMS_MASK | XIIC_CR_ENABLE_DEVICE_MASK;
- if (ByteCount == 1) {
- CntlReg |= XIIC_CR_NO_ACK_MASK;
- }
-
- /* Write out the control register to start receiving data and call the
- * function to receive each byte into the buffer
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET, CntlReg);
-
- /* Clear the latched interrupt status for the bus not busy bit which must
- * be done while the bus is busy
- */
- XIic_mClearIisr (BaseAddress, XIIC_INTR_BNB_MASK);
-
- /* Try to receive the data from the IIC bus */
-
- RemainingByteCount = RecvData (BaseAddress, BufferPtr, ByteCount);
- /*
- * The receive is complete, disable the IIC device and return the number of
- * bytes that was received
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET, 0);
-
- /* Return the number of bytes that was received */
-
- return ByteCount - RemainingByteCount;
-}
-
-/******************************************************************************
-*
-* Receive the specified data from the device that has been previously addressed
-* on the IIC bus. This function assumes that the 7 bit address has been sent
-* and it should wait for the transmit of the address to complete.
-*
-* @param BaseAddress contains the base address of the IIC device.
-* @param BufferPtr points to the buffer to hold the data that is received.
-* @param ByteCount is the number of bytes to be received.
-*
-* @return
-*
-* The number of bytes remaining to be received.
-*
-* @note
-*
-* This function does not take advantage of the receive FIFO because it is
-* designed for minimal code space and complexity. It contains loops that
-* that could cause the function not to return if the hardware is not working.
-*
-* This function assumes that the calling function will disable the IIC device
-* after this function returns.
-*
-******************************************************************************/
-static unsigned RecvData (u32 BaseAddress, u8 * BufferPtr, unsigned ByteCount)
-{
- u8 CntlReg;
- u32 IntrStatusMask;
- u32 IntrStatus;
-
- /* Attempt to receive the specified number of bytes on the IIC bus */
-
- while (ByteCount > 0) {
- /* Setup the mask to use for checking errors because when receiving one
- * byte OR the last byte of a multibyte message an error naturally
- * occurs when the no ack is done to tell the slave the last byte
- */
- if (ByteCount == 1) {
- IntrStatusMask =
- XIIC_INTR_ARB_LOST_MASK | XIIC_INTR_BNB_MASK;
- } else {
- IntrStatusMask =
- XIIC_INTR_ARB_LOST_MASK |
- XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_BNB_MASK;
- }
-
- /* Wait for the previous transmit and the 1st receive to complete
- * by checking the interrupt status register of the IPIF
- */
- while (1) {
- IntrStatus = XIIF_V123B_READ_IISR (BaseAddress);
- if (IntrStatus & XIIC_INTR_RX_FULL_MASK) {
- break;
- }
- /* Check the transmit error after the receive full because when
- * sending only one byte transmit error will occur because of the
- * no ack to indicate the end of the data
- */
- if (IntrStatus & IntrStatusMask) {
- return ByteCount;
- }
- }
-
- CntlReg = XIo_In8 (BaseAddress + XIIC_CR_REG_OFFSET);
-
- /* Special conditions exist for the last two bytes so check for them
- * Note that the control register must be setup for these conditions
- * before the data byte which was already received is read from the
- * receive FIFO (while the bus is throttled
- */
- if (ByteCount == 1) {
- /* For the last data byte, it has already been read and no ack
- * has been done, so clear MSMS while leaving the device enabled
- * so it can get off the IIC bus appropriately with a stop.
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
- XIIC_CR_ENABLE_DEVICE_MASK);
- }
-
- /* Before the last byte is received, set NOACK to tell the slave IIC
- * device that it is the end, this must be done before reading the byte
- * from the FIFO
- */
- if (ByteCount == 2) {
- /* Write control reg with NO ACK allowing last byte to
- * have the No ack set to indicate to slave last byte read.
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
- CntlReg | XIIC_CR_NO_ACK_MASK);
- }
-
- /* Read in data from the FIFO and unthrottle the bus such that the
- * next byte is read from the IIC bus
- */
- *BufferPtr++ = XIo_In8 (BaseAddress + XIIC_DRR_REG_OFFSET);
-
- /* Clear the latched interrupt status so that it will be updated with
- * the new state when it changes, this must be done after the receive
- * register is read
- */
- XIic_mClearIisr (BaseAddress, XIIC_INTR_RX_FULL_MASK |
- XIIC_INTR_TX_ERROR_MASK |
- XIIC_INTR_ARB_LOST_MASK);
- ByteCount--;
- }
-
- /* Wait for the bus to transition to not busy before returning, the IIC
- * device cannot be disabled until this occurs. It should transition as
- * the MSMS bit of the control register was cleared before the last byte
- * was read from the FIFO.
- */
- while (1) {
- if (XIIF_V123B_READ_IISR (BaseAddress) & XIIC_INTR_BNB_MASK) {
- break;
- }
- }
-
- return ByteCount;
-}
-
-/****************************************************************************/
-/**
-* Send data as a master on the IIC bus. This function sends the data
-* using polled I/O and blocks until the data has been sent. It only supports
-* 7 bit addressing and non-repeated start modes of operation. The user is
-* responsible for ensuring the bus is not busy if multiple masters are present
-* on the bus.
-*
-* @param BaseAddress contains the base address of the IIC device.
-* @param Address contains the 7 bit IIC address of the device to send the
-* specified data to.
-* @param BufferPtr points to the data to be sent.
-* @param ByteCount is the number of bytes to be sent.
-*
-* @return
-*
-* The number of bytes sent.
-*
-* @note
-*
-* None
-*
-******************************************************************************/
-unsigned XIic_Send (u32 BaseAddress, u8 Address,
- u8 * BufferPtr, unsigned ByteCount)
-{
- unsigned RemainingByteCount;
-
- /* Put the address into the FIFO to be sent and indicate that the operation
- * to be performed on the bus is a write operation
- */
- XIic_mSend7BitAddress (BaseAddress, Address, XIIC_WRITE_OPERATION);
-
- /* Clear the latched interrupt status so that it will be updated with the
- * new state when it changes, this must be done after the address is put
- * in the FIFO
- */
- XIic_mClearIisr (BaseAddress, XIIC_INTR_TX_EMPTY_MASK |
- XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_ARB_LOST_MASK);
-
- /* MSMS must be set after putting data into transmit FIFO, indicate the
- * direction is transmit, this device is master and enable the IIC device
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
- XIIC_CR_MSMS_MASK | XIIC_CR_DIR_IS_TX_MASK |
- XIIC_CR_ENABLE_DEVICE_MASK);
-
- /* Clear the latched interrupt
- * status for the bus not busy bit which must be done while the bus is busy
- */
- XIic_mClearIisr (BaseAddress, XIIC_INTR_BNB_MASK);
-
- /* Send the specified data to the device on the IIC bus specified by the
- * the address
- */
- RemainingByteCount = SendData (BaseAddress, BufferPtr, ByteCount);
-
- /*
- * The send is complete, disable the IIC device and return the number of
- * bytes that was sent
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET, 0);
-
- return ByteCount - RemainingByteCount;
-}
-
-/******************************************************************************
-*
-* Send the specified buffer to the device that has been previously addressed
-* on the IIC bus. This function assumes that the 7 bit address has been sent
-* and it should wait for the transmit of the address to complete.
-*
-* @param BaseAddress contains the base address of the IIC device.
-* @param BufferPtr points to the data to be sent.
-* @param ByteCount is the number of bytes to be sent.
-*
-* @return
-*
-* The number of bytes remaining to be sent.
-*
-* @note
-*
-* This function does not take advantage of the transmit FIFO because it is
-* designed for minimal code space and complexity. It contains loops that
-* that could cause the function not to return if the hardware is not working.
-*
-******************************************************************************/
-static unsigned SendData (u32 BaseAddress, u8 * BufferPtr, unsigned ByteCount)
-{
- u32 IntrStatus;
-
- /* Send the specified number of bytes in the specified buffer by polling
- * the device registers and blocking until complete
- */
- while (ByteCount > 0) {
- /* Wait for the transmit to be empty before sending any more data
- * by polling the interrupt status register
- */
- while (1) {
- IntrStatus = XIIF_V123B_READ_IISR (BaseAddress);
-
- if (IntrStatus & (XIIC_INTR_TX_ERROR_MASK |
- XIIC_INTR_ARB_LOST_MASK |
- XIIC_INTR_BNB_MASK)) {
- return ByteCount;
- }
-
- if (IntrStatus & XIIC_INTR_TX_EMPTY_MASK) {
- break;
- }
- }
- /* If there is more than one byte to send then put the next byte to send
- * into the transmit FIFO
- */
- if (ByteCount > 1) {
- XIo_Out8 (BaseAddress + XIIC_DTR_REG_OFFSET,
- *BufferPtr++);
- } else {
- /* Set the stop condition before sending the last byte of data so that
- * the stop condition will be generated immediately following the data
- * This is done by clearing the MSMS bit in the control register.
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
- XIIC_CR_ENABLE_DEVICE_MASK |
- XIIC_CR_DIR_IS_TX_MASK);
-
- /* Put the last byte to send in the transmit FIFO */
-
- XIo_Out8 (BaseAddress + XIIC_DTR_REG_OFFSET,
- *BufferPtr++);
- }
-
- /* Clear the latched interrupt status register and this must be done after
- * the transmit FIFO has been written to or it won't clear
- */
- XIic_mClearIisr (BaseAddress, XIIC_INTR_TX_EMPTY_MASK);
-
- /* Update the byte count to reflect the byte sent and clear the latched
- * interrupt status so it will be updated for the new state
- */
- ByteCount--;
- }
-
- /* Wait for the bus to transition to not busy before returning, the IIC
- * device cannot be disabled until this occurs.
- * Note that this is different from a receive operation because the stop
- * condition causes the bus to go not busy.
- */
- while (1) {
- if (XIIF_V123B_READ_IISR (BaseAddress) & XIIC_INTR_BNB_MASK) {
- break;
- }
- }
-
- return ByteCount;
-}
+++ /dev/null
-/* $Id: xiic_l.h,v 1.2 2002/12/05 19:32:40 meinelte Exp $ */
-/*****************************************************************************
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
-* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
-* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE.
-*
-* (c) Copyright 2002 Xilinx Inc.
-* All rights reserved.
-*
-*****************************************************************************/
-/****************************************************************************/
-/**
-*
-* @file xiic_l.h
-*
-* This header file contains identifiers and low-level driver functions (or
-* macros) that can be used to access the device. High-level driver functions
-* are defined in xiic.h.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b jhl 05/07/02 First release
-* 1.01c ecm 12/05/02 new rev
-* </pre>
-*
-*****************************************************************************/
-
-#ifndef XIIC_L_H /* prevent circular inclusions */
-#define XIIC_L_H /* by using protection macros */
-
-/***************************** Include Files ********************************/
-
-#include "xbasic_types.h"
-
-/************************** Constant Definitions ****************************/
-
-#define XIIC_MSB_OFFSET 3
-
-#define XIIC_REG_OFFSET 0x100 + XIIC_MSB_OFFSET
-
-/*
- * Register offsets in bytes from RegisterBase. Three is added to the
- * base offset to access LSB (IBM style) of the word
- */
-#define XIIC_CR_REG_OFFSET 0x00+XIIC_REG_OFFSET /* Control Register */
-#define XIIC_SR_REG_OFFSET 0x04+XIIC_REG_OFFSET /* Status Register */
-#define XIIC_DTR_REG_OFFSET 0x08+XIIC_REG_OFFSET /* Data Tx Register */
-#define XIIC_DRR_REG_OFFSET 0x0C+XIIC_REG_OFFSET /* Data Rx Register */
-#define XIIC_ADR_REG_OFFSET 0x10+XIIC_REG_OFFSET /* Address Register */
-#define XIIC_TFO_REG_OFFSET 0x14+XIIC_REG_OFFSET /* Tx FIFO Occupancy */
-#define XIIC_RFO_REG_OFFSET 0x18+XIIC_REG_OFFSET /* Rx FIFO Occupancy */
-#define XIIC_TBA_REG_OFFSET 0x1C+XIIC_REG_OFFSET /* 10 Bit Address reg */
-#define XIIC_RFD_REG_OFFSET 0x20+XIIC_REG_OFFSET /* Rx FIFO Depth reg */
-
-/* Control Register masks */
-
-#define XIIC_CR_ENABLE_DEVICE_MASK 0x01 /* Device enable = 1 */
-#define XIIC_CR_TX_FIFO_RESET_MASK 0x02 /* Transmit FIFO reset=1 */
-#define XIIC_CR_MSMS_MASK 0x04 /* Master starts Txing=1 */
-#define XIIC_CR_DIR_IS_TX_MASK 0x08 /* Dir of tx. Txing=1 */
-#define XIIC_CR_NO_ACK_MASK 0x10 /* Tx Ack. NO ack = 1 */
-#define XIIC_CR_REPEATED_START_MASK 0x20 /* Repeated start = 1 */
-#define XIIC_CR_GENERAL_CALL_MASK 0x40 /* Gen Call enabled = 1 */
-
-/* Status Register masks */
-
-#define XIIC_SR_GEN_CALL_MASK 0x01 /* 1=a mstr issued a GC */
-#define XIIC_SR_ADDR_AS_SLAVE_MASK 0x02 /* 1=when addr as slave */
-#define XIIC_SR_BUS_BUSY_MASK 0x04 /* 1 = bus is busy */
-#define XIIC_SR_MSTR_RDING_SLAVE_MASK 0x08 /* 1=Dir: mstr <-- slave */
-#define XIIC_SR_TX_FIFO_FULL_MASK 0x10 /* 1 = Tx FIFO full */
-#define XIIC_SR_RX_FIFO_FULL_MASK 0x20 /* 1 = Rx FIFO full */
-#define XIIC_SR_RX_FIFO_EMPTY_MASK 0x40 /* 1 = Rx FIFO empty */
-
-/* IPIF Interrupt Status Register masks Interrupt occurs when... */
-
-#define XIIC_INTR_ARB_LOST_MASK 0x01 /* 1 = arbitration lost */
-#define XIIC_INTR_TX_ERROR_MASK 0x02 /* 1=Tx error/msg complete*/
-#define XIIC_INTR_TX_EMPTY_MASK 0x04 /* 1 = Tx FIFO/reg empty */
-#define XIIC_INTR_RX_FULL_MASK 0x08 /* 1=Rx FIFO/reg=OCY level*/
-#define XIIC_INTR_BNB_MASK 0x10 /* 1 = Bus not busy */
-#define XIIC_INTR_AAS_MASK 0x20 /* 1 = when addr as slave */
-#define XIIC_INTR_NAAS_MASK 0x40 /* 1 = not addr as slave */
-#define XIIC_INTR_TX_HALF_MASK 0x80 /* 1 = TX FIFO half empty */
-
-/* IPIF Device Interrupt Register masks */
-
-#define XIIC_IPIF_IIC_MASK 0x00000004UL /* 1=inter enabled */
-#define XIIC_IPIF_ERROR_MASK 0x00000001UL /* 1=inter enabled */
-#define XIIC_IPIF_INTER_ENABLE_MASK (XIIC_IPIF_IIC_MASK | \
- XIIC_IPIF_ERROR_MASK)
-
-#define XIIC_TX_ADDR_SENT 0x00
-#define XIIC_TX_ADDR_MSTR_RECV_MASK 0x02
-
-/* The following constants specify the depth of the FIFOs */
-
-#define IIC_RX_FIFO_DEPTH 16 /* Rx fifo capacity */
-#define IIC_TX_FIFO_DEPTH 16 /* Tx fifo capacity */
-
-/* The following constants specify groups of interrupts that are typically
- * enabled or disables at the same time
- */
-#define XIIC_TX_INTERRUPTS \
- (XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_TX_EMPTY_MASK | \
- XIIC_INTR_TX_HALF_MASK)
-
-#define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS)
-
-/* The following constants are used with the following macros to specify the
- * operation, a read or write operation.
- */
-#define XIIC_READ_OPERATION 1
-#define XIIC_WRITE_OPERATION 0
-
-/* The following constants are used with the transmit FIFO fill function to
- * specify the role which the IIC device is acting as, a master or a slave.
- */
-#define XIIC_MASTER_ROLE 1
-#define XIIC_SLAVE_ROLE 0
-
-/**************************** Type Definitions ******************************/
-
-
-/***************** Macros (Inline Functions) Definitions ********************/
-
-
-/************************** Function Prototypes *****************************/
-
-unsigned XIic_Recv(u32 BaseAddress, u8 Address,
- u8 *BufferPtr, unsigned ByteCount);
-
-unsigned XIic_Send(u32 BaseAddress, u8 Address,
- u8 *BufferPtr, unsigned ByteCount);
-
-#endif /* end of protection macro */
#
include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
LIB = $(obj)lib$(BOARD).o
}
__maybe_unused
+static void print_eths(void)
+{
+ struct eth_device *dev;
+ int i = 0;
+
+ do {
+ dev = eth_get_dev_by_index(i);
+ if (dev) {
+ printf("eth%dname = %s\n", i, dev->name);
+ print_eth(i);
+ i++;
+ }
+ } while (dev);
+
+ printf("current eth = %s\n", eth_get_name());
+ printf("ip_addr = %s\n", getenv("ipaddr"));
+}
+
+__maybe_unused
static void print_lnum(const char *name, unsigned long long value)
{
printf("%-12s= 0x%.8llX\n", name, value);
print_num("sram size ", (ulong)bd->bi_sramsize);
#endif
#if defined(CONFIG_CMD_NET)
- print_eth(0);
- printf("ip_addr = %s\n", getenv("ipaddr"));
+ print_eths();
#endif
- printf("baudrate = %u bps\n", (ulong)bd->bi_baudrate);
+ printf("baudrate = %u bps\n", bd->bi_baudrate);
return 0;
}
}
#if defined(CONFIG_CMD_NET)
- print_eth(0);
- printf("ip_addr = %s\n", getenv("ipaddr"));
+ print_eths();
#endif
printf("baudrate = %u bps\n", bd->bi_baudrate);
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
- print_num("TLB addr", gd->tlb_addr);
+ print_num("TLB addr", gd->arch.tlb_addr);
#endif
print_num("relocaddr", gd->relocaddr);
print_num("reloc off", gd->reloc_off);
print_num("irq_sp", gd->irq_sp); /* irq stack pointer */
print_num("sp start ", gd->start_addr_sp);
+#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
print_num("FB base ", gd->fb_base);
+#endif
/*
* TODO: Currently only support for davinci SOC's is added.
* Remove this check once all the board implement this.
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
+#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
print_num("FB base ", gd->fb_base);
+#endif
return 0;
}
return CMD_RET_USAGE;
}
- if (images.state >= state) {
+ if (images.state < BOOTM_STATE_START ||
+ images.state >= state) {
printf("Trying to execute a command out of order\n");
return CMD_RET_USAGE;
}
#if defined(CONFIG_8xx)
ulong clock = gd->cpu_clk;
#elif defined(CONFIG_8260)
- ulong clock = gd->brg_clk;
+ ulong clock = gd->arch.brg_clk;
#endif
printf ("BRG%d:", n);
#include <common.h>
#include <command.h>
-/*
- * TODO(clchiou): This function actually minics the bottom-half of the
- * run_command() function. Since this function has ARM-dependent timer
- * codes, we cannot merge it with the run_command() for now.
- */
-static int run_command_and_time_it(int flag, int argc, char * const argv[],
- ulong *cycles)
-{
- cmd_tbl_t *cmdtp = find_cmd(argv[0]);
- int retval = 0;
-
- if (!cmdtp) {
- printf("%s: command not found\n", argv[0]);
- return 1;
- }
- if (argc > cmdtp->maxargs)
- return CMD_RET_USAGE;
-
- /*
- * TODO(clchiou): get_timer_masked() is only defined in certain ARM
- * boards. We could use the new timer API that Graeme is proposing
- * so that this piece of code would be arch-independent.
- */
- *cycles = get_timer_masked();
- retval = cmdtp->cmd(cmdtp, flag, argc, argv);
- *cycles = get_timer_masked() - *cycles;
-
- return retval;
-}
-
static void report_time(ulong cycles)
{
ulong minutes, seconds, milliseconds;
{
ulong cycles = 0;
int retval = 0;
+ int repeatable;
if (argc == 1)
return CMD_RET_USAGE;
- retval = run_command_and_time_it(0, argc - 1, argv + 1, &cycles);
+ retval = cmd_process(0, argc - 1, argv + 1, &repeatable, &cycles);
report_time(cycles);
return retval;
}
enum command_ret_t cmd_process(int flag, int argc, char * const argv[],
- int *repeatable)
+ int *repeatable, ulong *ticks)
{
enum command_ret_t rc = CMD_RET_SUCCESS;
cmd_tbl_t *cmdtp;
/* If OK so far, then do the command */
if (!rc) {
+ if (ticks)
+ *ticks = get_timer(0);
rc = cmd_call(cmdtp, flag, argc, argv);
+ if (ticks)
+ *ticks = get_timer(*ticks);
*repeatable &= cmdtp->repeatable;
}
if (rc == CMD_RET_USAGE)
#define CONFIG_ENV_OFFSET 0
#endif
-static int __mmc_get_env_addr(struct mmc *mmc, u32 *env_addr)
+__weak int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr)
{
*env_addr = CONFIG_ENV_OFFSET;
return 0;
}
-int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr)
- __attribute__((weak, alias("__mmc_get_env_addr")));
int env_init(void)
{
}
/* Process the command */
return cmd_process(flag, child->argc, child->argv,
- &flag_repeat);
+ &flag_repeat, NULL);
#endif
}
#ifndef __U_BOOT__
int abortboot(int bootdelay)
{
int abort = 0;
+ unsigned long ts;
#ifdef CONFIG_MENUPROMPT
printf(CONFIG_MENUPROMPT);
#endif
while ((bootdelay > 0) && (!abort)) {
- int i;
-
--bootdelay;
- /* delay 100 * 10ms */
- for (i=0; !abort && i<100; ++i) {
+ /* delay 1000 ms */
+ ts = get_timer(0);
+ do {
if (tstc()) { /* we got a key press */
abort = 1; /* don't auto boot */
bootdelay = 0; /* no more delay */
break;
}
udelay(10000);
- }
+ } while (!abort && get_timer(ts) < 1000);
printf("\b\b\b%2d ", bootdelay);
}
continue;
}
- if (cmd_process(flag, argc, argv, &repeatable))
+ if (cmd_process(flag, argc, argv, &repeatable, NULL))
rc = -1;
/* Did the user stop this? */
/* Initialize the list */
INIT_LIST_HEAD(&(devs.list));
-#ifdef CONFIG_ARM_DCC_MULTI
+#ifdef CONFIG_ARM_DCC
drv_arm_dcc_init ();
#endif
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
writeb(val, base + off);
writeb(val >> 8, base + off + 1);
#endif
- }
- out16(base + off, val);
+ } else
+ out16(base + off, val);
}
static u16 ace_readw(unsigned off)
}
static unsigned long systemace_read(int dev, unsigned long start,
- unsigned long blkcnt, void *buffer);
+ lbaint_t blkcnt, void *buffer);
static block_dev_desc_t systemace_dev = { 0 };
* number of blocks read. A zero return indicates an error.
*/
static unsigned long systemace_read(int dev, unsigned long start,
- unsigned long blkcnt, void *buffer)
+ lbaint_t blkcnt, void *buffer)
{
int retry;
unsigned blk_countdown;
static unsigned int get_i2c_clock(int bus)
{
if (bus)
- return gd->i2c2_clk; /* I2C2 clock */
+ return gd->arch.i2c2_clk; /* I2C2 clock */
else
- return gd->i2c1_clk; /* I2C1 clock */
+ return gd->arch.i2c1_clk; /* I2C1 clock */
}
void
int i2c_set_bus_speed(unsigned int speed)
{
- unsigned int i2c_clk = (i2c_bus_num == 1) ? gd->i2c2_clk : gd->i2c1_clk;
+ unsigned int i2c_clk = (i2c_bus_num == 1)
+ ? gd->arch.i2c2_clk : gd->arch.i2c1_clk;
writeb(0, &i2c_dev[i2c_bus_num]->cr); /* stop controller */
i2c_bus_speed[i2c_bus_num] =
/* select clock sources */
psc->psc_clock_select = 0;
- baseclk = (gd->ipb_clk + 16) / 32;
+ baseclk = (gd->arch.ipb_clk + 16) / 32;
/* switch to UART mode */
psc->sicr = 0;
mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
mmc->f_min = 400000;
- mmc->f_max = MIN(gd->sdhc_clk, 52000000);
+ mmc->f_max = MIN(gd->arch.sdhc_clk, 52000000);
mmc->b_max = 0;
mmc_register(mmc);
cfg = malloc(sizeof(struct fsl_esdhc_cfg));
memset(cfg, 0, sizeof(struct fsl_esdhc_cfg));
cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
- cfg->sdhc_clk = gd->sdhc_clk;
+ cfg->sdhc_clk = gd->arch.sdhc_clk;
return fsl_esdhc_initialize(bis, cfg);
}
#endif
do_fixup_by_compat_u32(blob, compat, "clock-frequency",
- gd->sdhc_clk, 1);
+ gd->arch.sdhc_clk, 1);
do_fixup_by_compat(blob, compat, "status", "okay",
4 + 1, 1);
.name = "M25P128",
},
{
+ .id = 0xba17,
+ .pages_per_sector = 256,
+ .nr_sectors = 128,
+ .name = "N25Q064",
+ },
+ {
.id = 0xba18,
.pages_per_sector = 256,
.nr_sectors = 256,
* and do not drop the Preamble.
*/
out_be32(&fec->eth->mii_speed,
- (((gd->ips_clk / 1000000) / 5) + 1) << 1);
+ (((gd->arch.ips_clk / 1000000) / 5) + 1) << 1);
/*
* Reset PHY, then delay 300ns
/*
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
+ * No MII for 7-wire mode
*/
- fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */
+ fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
}
if (fec->xcv_type != SEVENWIRE) {
/*
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
+ * No MII for 7-wire mode
*/
- fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */
+ fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
}
#if (DEBUG & 0x3)
/*
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
+ * No MII for 7-wire mode
*/
- fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */
+ fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
}
dev->priv = (void *)fec;
void ft_qe_setup(void *blob)
{
do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
- "bus-frequency", gd->qe_clk, 1);
+ "bus-frequency", gd->arch.qe_clk, 1);
do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
- "brg-frequency", gd->brg_clk, 1);
+ "brg-frequency", gd->arch.brg_clk, 1);
do_fixup_by_compat_u32(blob, "fsl,qe",
- "clock-frequency", gd->qe_clk, 1);
+ "clock-frequency", gd->arch.qe_clk, 1);
do_fixup_by_compat_u32(blob, "fsl,qe",
- "bus-frequency", gd->qe_clk, 1);
+ "bus-frequency", gd->arch.qe_clk, 1);
do_fixup_by_compat_u32(blob, "fsl,qe",
- "brg-frequency", gd->brg_clk, 1);
+ "brg-frequency", gd->arch.brg_clk, 1);
do_fixup_by_compat_u32(blob, "fsl,qe-gtm",
- "clock-frequency", gd->qe_clk / 2, 1);
+ "clock-frequency", gd->arch.qe_clk / 2, 1);
fdt_fixup_qe_firmware(blob);
}
uint savebase;
align_mask = align - 1;
- savebase = gd->mp_alloc_base;
+ savebase = gd->arch.mp_alloc_base;
- if ((off = (gd->mp_alloc_base & align_mask)) != 0)
- gd->mp_alloc_base += (align - off);
+ off = gd->arch.mp_alloc_base & align_mask;
+ if (off != 0)
+ gd->arch.mp_alloc_base += (align - off);
if ((off = size & align_mask) != 0)
size += (align - off);
- if ((gd->mp_alloc_base + size) >= gd->mp_alloc_top) {
- gd->mp_alloc_base = savebase;
+ if ((gd->arch.mp_alloc_base + size) >= gd->arch.mp_alloc_top) {
+ gd->arch.mp_alloc_base = savebase;
printf("%s: ran out of ram.\n", __FUNCTION__);
}
- retloc = gd->mp_alloc_base;
- gd->mp_alloc_base += size;
+ retloc = gd->arch.mp_alloc_base;
+ gd->arch.mp_alloc_base += size;
memset((void *)&qe_immr->muram[retloc], 0, size);
out_be32(&qe_immr->iram.iready,QE_IRAM_READY);
#endif
- gd->mp_alloc_base = QE_DATAONLY_BASE;
- gd->mp_alloc_top = gd->mp_alloc_base + QE_DATAONLY_SIZE;
+ gd->arch.mp_alloc_base = QE_DATAONLY_BASE;
+ gd->arch.mp_alloc_top = gd->arch.mp_alloc_base + QE_DATAONLY_SIZE;
qe_sdma_init();
qe_snums_init();
from CLKn pin, we have te change the function.
*/
-#define BRG_CLK (gd->brg_clk)
+#define BRG_CLK (gd->arch.brg_clk)
int qe_set_brg(uint brg, uint rate)
{
#define TIMEOUT_COUNT 0x4000000
-#ifndef CONFIG_ARM_DCC_MULTI
-#define arm_dcc_init serial_init
-void serial_setbrg(void) {}
-#define arm_dcc_getc serial_getc
-#define arm_dcc_putc serial_putc
-#define arm_dcc_puts serial_puts
-#define arm_dcc_tstc serial_tstc
-#endif
-
int arm_dcc_init(void)
{
return 0;
return reg;
}
-#ifdef CONFIG_ARM_DCC_MULTI
static struct stdio_dev arm_dcc_dev;
int drv_arm_dcc_init(void)
{
- int rc;
-
- /* Device initialization */
- memset(&arm_dcc_dev, 0, sizeof(arm_dcc_dev));
-
strcpy(arm_dcc_dev.name, "dcc");
arm_dcc_dev.ext = 0; /* No extensions */
arm_dcc_dev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_OUTPUT;
return stdio_register(&arm_dcc_dev);
}
-#endif
+
+__weak struct serial_device *default_serial_console(void)
+{
+ return NULL;
+}
debug("%s: bus:%i cs:%i base:%p mode:%x max_hz:%d\n", __func__,
bus, cs, xilspi->regs, xilspi->mode, xilspi->freq);
+ writel(SPISSR_RESET_VALUE, &xilspi->regs->srr);
+
return &xilspi->slave;
}
#define SPIRFOR_OCYVAL_POS 0
#define SPIRFOR_OCYVAL_MASK (0xf << SPIRFOR_OCYVAL_POS)
+/* SPI Software Reset Register (ssr) */
+#define SPISSR_RESET_VALUE 0x0a
+
struct xilinx_spi_slave {
struct spi_slave slave;
struct xilinx_spi_reg *regs;
/* Pointer to initial global data area */
if (dpinit_done == 0) {
- dpbase = gd->dp_alloc_base;
+ dpbase = gd->arch.dp_alloc_base;
dpinit_done = 1;
}
if ((off = size & align_mask) != 0)
size += align - off;
- if ((dpbase + size) >= gd->dp_alloc_top) {
+ if ((dpbase + size) >= gd->arch.dp_alloc_top) {
dpbase = savebase;
printf ("dpalloc: ran out of dual port ram!");
return 0;
#include <part.h>
#include <malloc.h>
#include <linux/compiler.h>
+#include <linux/ctype.h>
+
+#ifdef CONFIG_SUPPORT_VFAT
+static const int vfat_enabled = 1;
+#else
+static const int vfat_enabled = 0;
+#endif
/*
* Convert a string to lowercase.
static void downcase(char *str)
{
while (*str != '\0') {
- TOLOWER(*str);
+ *str = tolower(*str);
str++;
}
}
} while (1);
}
-#ifdef CONFIG_SUPPORT_VFAT
/*
* Extract the file name information from 'slotptr' into 'l_name',
* starting at l_name[*idx].
return ret;
}
-#endif /* CONFIG_SUPPORT_VFAT */
/*
* Get the directory entry associated with 'filename' from the directory
continue;
}
if ((dentptr->attr & ATTR_VOLUME)) {
-#ifdef CONFIG_SUPPORT_VFAT
- if ((dentptr->attr & ATTR_VFAT) == ATTR_VFAT &&
+ if (vfat_enabled &&
+ (dentptr->attr & ATTR_VFAT) == ATTR_VFAT &&
(dentptr->name[0] & LAST_LONG_ENTRY_MASK)) {
prevcksum = ((dir_slot *)dentptr)->alias_checksum;
get_vfatname(mydata, curclust,
continue;
}
debug("vfatname: |%s|\n", l_name);
- } else
-#endif
- {
+ } else {
/* Volume label or VFAT entry */
dentptr++;
continue;
debug("Dentname == NULL - %d\n", i);
return NULL;
}
-#ifdef CONFIG_SUPPORT_VFAT
- __u8 csum = mkcksum(dentptr->name, dentptr->ext);
- if (dols && csum == prevcksum) {
- prevcksum = 0xffff;
- dentptr++;
- continue;
+ if (vfat_enabled) {
+ __u8 csum = mkcksum(dentptr->name, dentptr->ext);
+ if (dols && csum == prevcksum) {
+ prevcksum = 0xffff;
+ dentptr++;
+ continue;
+ }
}
-#endif
+
get_name(dentptr, s_name);
if (dols) {
int isdir = (dentptr->attr & ATTR_DIR);
return -1;
}
-#ifdef CONFIG_SUPPORT_VFAT
- debug("VFAT Support enabled\n");
-#endif
+ if (vfat_enabled)
+ debug("VFAT Support enabled\n");
+
debug("FAT%d, fat_sect: %d, fatlength: %d\n",
mydata->fatsize, mydata->fat_sect, mydata->fatlength);
debug("Rootdir begins at cluster: %d, sector: %d, offset: %x\n"
continue;
}
- csum = mkcksum(dentptr->name, dentptr->ext);
+ if (vfat_enabled)
+ csum = mkcksum(dentptr->name, dentptr->ext);
+
if (dentptr->attr & ATTR_VOLUME) {
-#ifdef CONFIG_SUPPORT_VFAT
- if ((dentptr->attr & ATTR_VFAT) == ATTR_VFAT &&
+ if (vfat_enabled &&
+ (dentptr->attr & ATTR_VFAT) == ATTR_VFAT &&
(dentptr->name[0] & LAST_LONG_ENTRY_MASK)) {
prevcksum =
((dir_slot *)dentptr)->alias_checksum;
}
debug("Rootvfatname: |%s|\n",
l_name);
- } else
-#endif
- {
+ } else {
/* Volume label or VFAT entry */
dentptr++;
continue;
}
goto exit;
}
-#ifdef CONFIG_SUPPORT_VFAT
- else if (dols == LS_ROOT && csum == prevcksum) {
+ else if (vfat_enabled &&
+ dols == LS_ROOT && csum == prevcksum) {
prevcksum = 0xffff;
dentptr++;
continue;
}
-#endif
+
get_name(dentptr, s_name);
if (dols == LS_ROOT) {
#include <fat.h>
#include <asm/byteorder.h>
#include <part.h>
+#include <linux/ctype.h>
#include "fat.c"
static void uppercase(char *str, int len)
int i;
for (i = 0; i < len; i++) {
- TOUPPER(*str);
+ *str = toupper(*str);
str++;
}
}
return ret;
}
-#ifdef CONFIG_SUPPORT_VFAT
/*
* Set the file name information from 'name' into 'slotptr',
*/
return 0;
}
-#endif
-
/*
* Set the entry at index 'entry' in a FAT (16/32) table.
*/
continue;
}
if ((dentptr->attr & ATTR_VOLUME)) {
-#ifdef CONFIG_SUPPORT_VFAT
- if ((dentptr->attr & ATTR_VFAT) &&
+ if (vfat_enabled &&
+ (dentptr->attr & ATTR_VFAT) &&
(dentptr->name[0] & LAST_LONG_ENTRY_MASK)) {
get_long_file_name(mydata, curclust,
get_dentfromdir_block,
&dentptr, l_name);
debug("vfatname: |%s|\n", l_name);
- } else
-#endif
- {
+ } else {
/* Volume label or VFAT entry */
dentptr++;
if (is_next_clust(mydata, dentptr))
--- /dev/null
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ * (C) Copyright 2002-2010
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_GENERIC_GBL_DATA_H
+#define __ASM_GENERIC_GBL_DATA_H
+/*
+ * The following data structure is placed in some memory which is
+ * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
+ * some locked parts of the data cache) to allow for a minimum set of
+ * global variables during system initialization (until we have set
+ * up the memory controller so that we can use RAM).
+ *
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
+ *
+ * Each architecture has its own private fields. For now all are private
+ */
+
+#ifndef __ASSEMBLY__
+typedef struct global_data {
+ bd_t *bd;
+ unsigned long flags;
+ unsigned long baudrate;
+ unsigned long cpu_clk; /* CPU clock in Hz! */
+ unsigned long bus_clk;
+ /* We cannot bracket this with CONFIG_PCI due to mpc5xxx */
+ unsigned long pci_clk;
+ unsigned long mem_clk;
+#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
+ unsigned long fb_base; /* Base address of framebuffer mem */
+#endif
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+ unsigned long post_log_word; /* Record POST activities */
+ unsigned long post_log_res; /* success of POST test */
+ unsigned long post_init_f_time; /* When post_init_f started */
+#endif
+#ifdef CONFIG_BOARD_TYPES
+ unsigned long board_type;
+#endif
+ unsigned long have_console; /* serial_init() was called */
+#ifdef CONFIG_PRE_CONSOLE_BUFFER
+ unsigned long precon_buf_idx; /* Pre-Console buffer index */
+#endif
+#ifdef CONFIG_MODEM_SUPPORT
+ unsigned long do_mdm_init;
+ unsigned long be_quiet;
+#endif
+ unsigned long env_addr; /* Address of Environment struct */
+ unsigned long env_valid; /* Checksum of Environment valid? */
+
+ /* TODO: is this the same as relocaddr, or something else? */
+ unsigned long dest_addr; /* Post-relocation address of U-Boot */
+ unsigned long dest_addr_sp;
+ unsigned long ram_top; /* Top address of RAM used by U-Boot */
+
+ unsigned long relocaddr; /* Start address of U-Boot in RAM */
+ phys_size_t ram_size; /* RAM size */
+ unsigned long mon_len; /* monitor len */
+ unsigned long irq_sp; /* irq stack pointer */
+ unsigned long start_addr_sp; /* start_addr_stackpointer */
+ unsigned long reloc_off;
+ struct global_data *new_gd; /* relocated global data */
+ const void *fdt_blob; /* Our device tree, NULL if none */
+ void **jt; /* jump table */
+ char env_buf[32]; /* buffer for getenv() before reloc. */
+ struct arch_global_data arch; /* architecture-specific data */
+} gd_t;
+#endif
+
+/*
+ * Global Data Flags
+ */
+#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
+#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
+#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
+#define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */
+#define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */
+#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
+#define GD_FLG_ENV_READY 0x00080 /* Env. imported into hash table */
+
+#endif /* __ASM_GENERIC_GBL_DATA_H */
* @param repeatable This function sets this to 0 if the command is not
* repeatable. If the command is repeatable, the value
* is left unchanged.
+ * @param ticks If ticks is not null, this function set it to the
+ * number of ticks the command took to complete.
* @return 0 if the command succeeded, 1 if it failed
*/
int cmd_process(int flag, int argc, char * const argv[],
- int *repeatable);
+ int *repeatable, unsigned long *ticks);
#endif /* __ASSEMBLY__ */
#define CONFIG_FEC_MXC_PHYADDR 0
#define IMX_FEC_BASE MXS_ENET0_BASE
#define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
#define CONFIG_FEC_XCV_TYPE RMII
#endif
# define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
#endif
-/* FSL */
-/* #define CONFIG_SYS_FSL_2 */
-/* #define FSL_INTR_2 1 */
-
/*
* memory layout - Example
* CONFIG_SYS_TEXT_BASE = 0x1200_0000; defined in config.mk
#define CONFIG_FEC_MXC
#define CONFIG_FEC_MXC_MULTI
#define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_PHYLIB
#define CONFIG_PHY_SMSC
#endif
#endif
-#define TOLOWER(c) if((c) >= 'A' && (c) <= 'Z'){(c)+=('a' - 'A');}
-#define TOUPPER(c) if ((c) >= 'a' && (c) <= 'z') \
- (c) -= ('a' - 'A');
#define START(dent) (FAT2CPU16((dent)->start) \
+ (mydata->fatsize != 32 ? 0 : \
(FAT2CPU16((dent)->starthi) << 16)))
struct stdio_dev* stdio_get_by_name(const char* name);
struct stdio_dev* stdio_clone(struct stdio_dev *dev);
-#ifdef CONFIG_ARM_DCC_MULTI
+#ifdef CONFIG_ARM_DCC
int drv_arm_dcc_init(void);
#endif
#ifdef CONFIG_LCD