Retract #6986.
authorJarkko Hietaniemi <jhi@iki.fi>
Fri, 1 Sep 2000 20:25:26 +0000 (20:25 +0000)
committerJarkko Hietaniemi <jhi@iki.fi>
Fri, 1 Sep 2000 20:25:26 +0000 (20:25 +0000)
p4raw-id: //depot/perl@6990

hints/solaris_2.sh

index 9f86871..22a0324 100644 (file)
@@ -1,17 +1,8 @@
 # hints/solaris_2.sh
-# Last modified: Friday, 2000-09-01
-# Lupe Christoph <lupe@lupe-christoph.de>
-# Based on version by:
+# Last modified:  Tue Apr 13 13:12:49 EDT 1999
 # Andy Dougherty  <doughera@lafayette.edu>
-# Which was based on input from lots of folks, especially
+# Based on input from lots of folks, especially
 # Dean Roehrich <roehrich@ironwood-fddi.cray.com>
-# Additional input from Alan Burlison, Jarkko Hietaniemi,
-# and Richard Soderberg.
-
-# For consistency with gcc, we do not adopt Sun Marketing's
-# removal of the '2.' prefix from the Solaris version number.
-# (Configure tries to detect an old fixincludes and needs
-# this information.)
 
 # If perl fails tests that involve dynamic loading of extensions, and
 # you are using gcc, be sure that you are NOT using GNU as and ld.  One
@@ -32,14 +23,13 @@ d_suidsafe=define
 set `echo $glibpth | sed -e 's@/usr/ucblib@@'`
 glibpth="$*"
 
-# Remove unwanted libraries.  -lucb contains incompatible routines.
-# -lld and -lsec don't do anything useful. -lcrypt does not
-# really provide anything we need over -lc, so we droip it, too.
+# Remove bad libraries.  -lucb contains incompatible routines.
+# -lld doesn't do anything useful.
 # -lmalloc can cause a problem with GNU CC & Solaris.  Specifically,
 # libmalloc.a may allocate memory that is only 4 byte aligned, but
 # GNU CC on the Sparc assumes that doubles are 8 byte aligned.
 # Thanks to  Hallvard B. Furuseth <h.b.furuseth@usit.uio.no>
-set `echo " $libswanted " | sed -e 's@ ld @ @' -e 's@ malloc @ @' -e 's@ ucb @ @' -e 's@ sec @ @' -e 's@ crypt @ @'` 
+set `echo " $libswanted " | sed -e 's@ ld @ @' -e 's@ malloc @ @' -e 's@ ucb @ @'`
 libswanted="$*"
 
 # Look for architecture name.  We want to suggest a useful default.
@@ -61,11 +51,9 @@ case "$ccversion" in
 *) ccversion='' ;;
 esac
 
-if test `uname -p` = "sparc"; then
-    # This is only needed for SPARC V9
-    cat >UU/workshoplibpth.cbu<<'EOCBU'
+cat >UU/workshoplibpth.cbu<<'EOCBU'
 case "$workshoplibpth_done" in
-    '')        case "$use64bitall" in
+'')    case "$use64bitall" in
        "$define"|true|[yY]*)
             loclibpth="$loclibpth /usr/lib/sparcv9"
             if test -n "$workshoplibs"; then
@@ -84,7 +72,6 @@ case "$workshoplibpth_done" in
        ;;
 esac
 EOCBU
-fi
 
 case "$ccname" in
 workshop)
@@ -415,35 +402,16 @@ case "$usemorebits" in
        ;;
 esac
 
-if test `uname -p` = "sparc"; then
-    cat > UU/use64bitint.cbu <<'EOCBU'
-# This script UU/use64bitint.cbu will get 'called-back' by Configure 
-# after it has prompted the user for whether to use 64 bit integers.
-case "$use64bitint" in
-"$define"|true|[yY]*)
-           case "`uname -r`" in
-           5.[0-4])
-               cat >&4 <<EOM
-Solaris `uname -r|sed -e 's/^5\./2./'` does not support 64-bit integers.
-You should upgrade to at least Solaris 2.5.
-EOM
-               exit 1
-               ;;
-           esac
-           ;;
-esac
-EOCBU
-
-    cat > UU/use64bitall.cbu <<'EOCBU'
+cat > UU/use64bitall.cbu <<'EOCBU'
 # This script UU/use64bitall.cbu will get 'called-back' by Configure 
 # after it has prompted the user for whether to be maximally 64 bitty.
 case "$use64bitall-$use64bitall_done" in
 "$define-"|true-|[yY]*-)
            case "`uname -r`" in
-           5.[0-6])
+           5.[1-6])
                cat >&4 <<EOM
-Solaris `uname -r|sed -e 's/^5\./2./'` does not support 64-bit pointers.
-You should upgrade to at least Solaris 2.7.
+Solaris `uname -r|sed -e 's/^5\.\([789]\)$/\1/'` does not support 64-bit pointers.
+You should upgrade to at least Solaris 7.
 EOM
                exit 1
                ;;
@@ -453,12 +421,13 @@ EOM
                cat >&4 <<EOM
 
 I do not see the 64-bit libc, $libc.
+(You are either in an old sparc or in an x86.)
 Cannot continue, aborting.
 
 EOM
                exit 1
            fi 
-           . ./workshoplibpth.cbu
+           . ./UU/workshoplibpth.cbu
            case "$cc -v 2>/dev/null" in
            *gcc*)
                echo 'main() { return 0; }' > try.c
@@ -498,15 +467,14 @@ esac'
            ;;
 esac
 EOCBU
-
-    # Actually, we want to run this already now, if so requested,
-    # because we need to fix up things right now.
-    case "$use64bitall" in
-    "$define"|true|[yY]*)
+# Actually, we want to run this already now, if so requested,
+# because we need to fix up things right now.
+case "$use64bitall" in
+"$define"|true|[yY]*)
        . ./UU/use64bitall.cbu
        ;;
-    esac
-fi
+esac
 
 cat > UU/uselongdouble.cbu <<'EOCBU'
 # This script UU/uselongdouble.cbu will get 'called-back' by Configure 
@@ -612,85 +580,68 @@ roehrich@cray.com
 
 -----------
 
-Archive-name: Solaris2/FAQ
-Version: 1.70
-Last-Modified: 2000/07/06 10:01:14
-Maintained-by: Casper Dik <Casper.Dik@Holland.Sun.COM>
+From: Casper.Dik@Holland.Sun.COM (Casper H.S. Dik - Network Security Engineer)
+Subject: Solaris 2 Frequently Asked Questions (FAQ) 1.48
+Date: 25 Jul 1995 12:20:18 GMT
 
-5.9) Why do I get __builtin_va_alist or __builtin_va_arg_incr undefined? 
+5.7) Why do I get __builtin_va_alist or __builtin_va_arg_incr undefined?
 
     You're using gcc without properly installing the gcc fixed
-    include files. Or you ran fixincludes after installing gcc
-    w/o moving the gcc supplied varargs.h and stdarg.h files out
-    of the way and moving them back again later. This often
-    happens when people install gcc from a binary
-    distribution. If there's a tmp directory in gcc's include
-    directory, fixincludes didn't complete. You should have run
-    "just-fixinc" instead.
+    include files.  Or you ran fixincludes after installing gcc
+    w/o moving the gcc supplied varargs.h and stdarg.h files
+    out of the way and moving them back again later.  This often
+    happens when people install gcc from a binary distribution.
+    If there's a tmp directory in gcc's include directory, fixincludes
+    didn't complete.  You should have run "just-fixinc" instead.
 
-    Another possible cause is that you're using ``gcc -I/usr/include.''
-
-    Reinstall gcc or upgrade to gcc 2.8.0 or later, which
-    doesn't require a reinstallation after every OS upgrade, if
-    you run Solaris 2.5 or later.
+    Another possible cause is using ``gcc -I/usr/include.''
 
 6.1) Where is the C compiler or where can I get one?
 
     [...]
 
-    4) Gcc. 
-
-    Gcc is available from the GNU archives in source form. You
-    need gcc 2.3.3 or later, and you should prefer gcc 2.8.0 or
-    later as it works better with Solaris 2.x include files. You
-    should not use GNU as or GNU ld. Make sure you run
-    just-fixinc if you use a binary distribution. Better is to
-    get a binary version and use that to bootstrap gcc from
-    source.
+    3) Gcc.
 
-    GNU software is available from: 
+    Gcc is available from the GNU archives in source and binary
+    form.  Look in a directory called sparc-sun-solaris2 for
+    binaries.  You need gcc 2.3.3 or later.  You should not use
+    GNU as or GNU ld.  Make sure you run just-fixinc if you use
+    a binary distribution.  Better is to get a binary version and
+    use that to bootstrap gcc from source.
 
-    prep.ai.mit.edu:/pub/gnu
-    gatekeeper.dec.com:/pub/GNU
-    ftp.uu.net:/systems/gnu
-    wuarchive.wustl.edu:/mirrors/gnu
-    nic.funet.fi:/pub/gnu
+    [...]
 
     When you install gcc, don't make the mistake of installing
     GNU binutils or GNU libc, they are not as capable as their
     counterparts you get with Solaris 2.x.
 
-6.11) I can't get perl 4.036 to compile or run. 
+6.9) I can't get perl 4.036 to compile or run.
 
-    Run Configure, and use the solaris_2_0 hints, don't use the
-    solaris_2_1 hints and don't use the config.sh you may
-    already have. First you must make sure Configure and make
-    don't find /usr/ucb/cc. (It must use gcc or the native C
+    Run Configure, and use the solaris_2_0 hints, *don't* use
+    the solaris_2_1 hints and don't use the config.sh you may
+    already have.  First you must make sure Configure and make
+    don't find /usr/ucb/cc.  (It must use gcc or the native C
     compiler: /opt/SUNWspro/bin/cc)
 
-    Some questions need a special answer. 
+    Some questions need a special answer.
 
-    Are your system (especially dbm) libraries compiled with
-    gcc? [y] y
+    Are your system (especially dbm) libraries compiled with gcc? [y] y
 
     yes: gcc 2.3.3 or later uses the standard calling
     conventions, same as Sun's C.
 
     Any additional cc flags? [ -traditional -Dvolatile=__volatile__
     -I/usr/ucbinclude] -traditional -Dvolatile=__volatile__
-
-    Remove /usr/ucbinclude. 
+    Remove /usr/ucbinclude.
 
     Any additional libraries? [-lsocket -lnsl -ldbm -lmalloc -lm
     -lucb] -lsocket -lnsl  -lm
 
-    Don't include -ldbm, -lmalloc and -lucb. 
-
-    Perl 5 compiles out of the box. 
+    Don't include -ldbm, -lmalloc and -lucb.
 
-----------------------------------------------------------------
+    Perl 5 compiled out of the box.
 
-64-bitness, from Alan Burlison (added by jhi 2000-02-21)
+7.0) 64-bitness, from Alan Burlison (added by jhi 2000-02-21)
 
   You need a machine running Solaris 2.7 or above.
 
@@ -737,3 +688,4 @@ Maintained-by: Casper Dik <Casper.Dik@Holland.Sun.COM>
   > to build 64 bit apps unless they need the address space.
 
 End_of_Solaris_Notes
+