ath10k: add QCA9377 sdio hw_param item

Add hardware parameters for QCA9377 sdio devices, it's now properly supported.

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index f561b8b..70f3bae 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -541,6 +541,33 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
                .tx_stats_over_pktlog = false,
        },
        {
+               .id = QCA9377_HW_1_1_DEV_VERSION,
+               .dev_id = QCA9377_1_0_DEVICE_ID,
+               .bus = ATH10K_BUS_SDIO,
+               .name = "qca9377 hw1.1 sdio",
+               .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
+               .uart_pin = 19,
+               .otp_exe_param = 0,
+               .channel_counters_freq_hz = 88000,
+               .max_probe_resp_desc_thres = 0,
+               .cal_data_len = 8124,
+               .fw = {
+                       .dir = QCA9377_HW_1_0_FW_DIR,
+                       .board = QCA9377_HW_1_0_BOARD_DATA_FILE,
+                       .board_size = QCA9377_BOARD_DATA_SZ,
+                       .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
+               },
+               .hw_ops = &qca6174_ops,
+               .hw_clk = qca6174_clk,
+               .target_cpu_freq = 176000000,
+               .decap_align_bytes = 4,
+               .n_cipher_suites = 8,
+               .num_peers = TARGET_QCA9377_HL_NUM_PEERS,
+               .ast_skid_limit = 0x10,
+               .num_wds_entries = 0x20,
+               .uart_pin_workaround = true,
+       },
+       {
                .id = QCA4019_HW_1_0_DEV_VERSION,
                .dev_id = 0,
                .bus = ATH10K_BUS_AHB,

diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 775fd62..970c736 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -774,6 +774,9 @@ ath10k_is_rssi_enable(struct ath10k_hw_params *hw,
 #define TARGET_HL_TLV_AST_SKID_LIMIT           16
 #define TARGET_HL_TLV_NUM_WDS_ENTRIES          2
 
+/* Target specific defines for QCA9377 high latency firmware */
+#define TARGET_QCA9377_HL_NUM_PEERS            15
+
 /* Diagnostic Window */
 #define CE_DIAG_PIPE   7