net: phy: add Marvell 88X2222 transceiver support
authorIvan Bornyakov <i.bornyakov@metrotek.ru>
Mon, 15 Mar 2021 14:19:26 +0000 (17:19 +0300)
committerDavid S. Miller <davem@davemloft.net>
Mon, 15 Mar 2021 21:50:28 +0000 (14:50 -0700)
Add basic support for the Marvell 88X2222 multi-speed ethernet
transceiver.

This PHY provides data transmission over fiber-optic as well as Twinax
copper links. The 88X2222 supports 2 ports of 10GBase-R and 1000Base-X
on the line-side interface. The host-side interface supports 4 ports of
10GBase-R, RXAUI, 1000Base-X and 2 ports of XAUI.

This driver, however, supports only XAUI on the host-side and
1000Base-X/10GBase-R on the line-side, for now. The SGMII is also
supported over 1000Base-X. Interrupts are not supported.

Internal registers access compliant with the Clause 45 specification.

Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/phy/Kconfig
drivers/net/phy/Makefile
drivers/net/phy/marvell-88x2222.c [new file with mode: 0644]
include/linux/marvell_phy.h

index 698bea312adc6bc1c50eac94df3cce1df6fa2f90..a615b3660b05d7ed55981c9645cdc04d0f5c8b40 100644 (file)
@@ -201,6 +201,12 @@ config MARVELL_10G_PHY
        help
          Support for the Marvell Alaska MV88X3310 and compatible PHYs.
 
+config MARVELL_88X2222_PHY
+       tristate "Marvell 88X2222 PHY"
+       help
+         Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet
+         Transceiver.
+
 config MICREL_PHY
        tristate "Micrel PHYs"
        help
index a13e402074cf8fafe75764ad8abab576effc56d1..de683e3abe634d8f2fa25caceb7671ebdb6a4728 100644 (file)
@@ -63,6 +63,7 @@ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
 obj-$(CONFIG_LXT_PHY)          += lxt.o
 obj-$(CONFIG_MARVELL_10G_PHY)  += marvell10g.o
 obj-$(CONFIG_MARVELL_PHY)      += marvell.o
+obj-$(CONFIG_MARVELL_88X2222_PHY)      += marvell-88x2222.o
 obj-$(CONFIG_MESON_GXL_PHY)    += meson-gxl.o
 obj-$(CONFIG_MICREL_KS8995MA)  += spi_ks8995.o
 obj-$(CONFIG_MICREL_PHY)       += micrel.o
diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c
new file mode 100644 (file)
index 0000000..eca8c2f
--- /dev/null
@@ -0,0 +1,519 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Marvell 88x2222 dual-port multi-speed ethernet transceiver.
+ *
+ * Supports:
+ *     XAUI on the host side.
+ *     1000Base-X or 10GBase-R on the line side.
+ *     SGMII over 1000Base-X.
+ */
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/mdio.h>
+#include <linux/marvell_phy.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/sfp.h>
+#include <linux/netdevice.h>
+
+/* Port PCS Configuration */
+#define        MV_PCS_CONFIG           0xF002
+#define        MV_PCS_HOST_XAUI        0x73
+#define        MV_PCS_LINE_10GBR       (0x71 << 8)
+#define        MV_PCS_LINE_1GBX_AN     (0x7B << 8)
+#define        MV_PCS_LINE_SGMII_AN    (0x7F << 8)
+
+/* Port Reset and Power Down */
+#define        MV_PORT_RST     0xF003
+#define        MV_LINE_RST_SW  BIT(15)
+#define        MV_HOST_RST_SW  BIT(7)
+#define        MV_PORT_RST_SW  (MV_LINE_RST_SW | MV_HOST_RST_SW)
+
+/* 1000Base-X/SGMII Control Register */
+#define        MV_1GBX_CTRL            (0x2000 + MII_BMCR)
+
+/* 1000BASE-X/SGMII Status Register */
+#define        MV_1GBX_STAT            (0x2000 + MII_BMSR)
+
+/* 1000Base-X Auto-Negotiation Advertisement Register */
+#define        MV_1GBX_ADVERTISE       (0x2000 + MII_ADVERTISE)
+
+/* 1000Base-X PHY Specific Status Register */
+#define        MV_1GBX_PHY_STAT                0xA003
+#define        MV_1GBX_PHY_STAT_AN_RESOLVED    BIT(11)
+#define        MV_1GBX_PHY_STAT_DUPLEX         BIT(13)
+#define        MV_1GBX_PHY_STAT_SPEED100       BIT(14)
+#define        MV_1GBX_PHY_STAT_SPEED1000      BIT(15)
+
+struct mv2222_data {
+       phy_interface_t line_interface;
+       __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
+};
+
+/* SFI PMA transmit enable */
+static int mv2222_tx_enable(struct phy_device *phydev)
+{
+       return phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_TXDIS,
+                                 MDIO_PMD_TXDIS_GLOBAL);
+}
+
+/* SFI PMA transmit disable */
+static int mv2222_tx_disable(struct phy_device *phydev)
+{
+       return phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_TXDIS,
+                               MDIO_PMD_TXDIS_GLOBAL);
+}
+
+static int mv2222_soft_reset(struct phy_device *phydev)
+{
+       int val, ret;
+
+       ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, MV_PORT_RST,
+                           MV_PORT_RST_SW);
+       if (ret < 0)
+               return ret;
+
+       return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND2, MV_PORT_RST,
+                                        val, !(val & MV_PORT_RST_SW),
+                                        5000, 1000000, true);
+}
+
+/* Returns negative on error, 0 if link is down, 1 if link is up */
+static int mv2222_read_status_10g(struct phy_device *phydev)
+{
+       int val, link = 0;
+
+       val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1);
+       if (val < 0)
+               return val;
+
+       if (val & MDIO_STAT1_LSTATUS) {
+               link = 1;
+
+               /* 10GBASE-R do not support auto-negotiation */
+               phydev->autoneg = AUTONEG_DISABLE;
+               phydev->speed = SPEED_10000;
+               phydev->duplex = DUPLEX_FULL;
+       }
+
+       return link;
+}
+
+/* Returns negative on error, 0 if link is down, 1 if link is up */
+static int mv2222_read_status_1g(struct phy_device *phydev)
+{
+       int val, link = 0;
+
+       val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_1GBX_STAT);
+       if (val < 0)
+               return val;
+
+       if (!(val & BMSR_LSTATUS) ||
+           (phydev->autoneg == AUTONEG_ENABLE &&
+            !(val & BMSR_ANEGCOMPLETE)))
+               return 0;
+
+       link = 1;
+
+       val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_1GBX_PHY_STAT);
+       if (val < 0)
+               return val;
+
+       if (val & MV_1GBX_PHY_STAT_AN_RESOLVED) {
+               if (val & MV_1GBX_PHY_STAT_DUPLEX)
+                       phydev->duplex = DUPLEX_FULL;
+               else
+                       phydev->duplex = DUPLEX_HALF;
+
+               if (val & MV_1GBX_PHY_STAT_SPEED1000)
+                       phydev->speed = SPEED_1000;
+               else if (val & MV_1GBX_PHY_STAT_SPEED100)
+                       phydev->speed = SPEED_100;
+               else
+                       phydev->speed = SPEED_10;
+       }
+
+       return link;
+}
+
+static int mv2222_read_status(struct phy_device *phydev)
+{
+       struct mv2222_data *priv = phydev->priv;
+       int link;
+
+       phydev->link = 0;
+       phydev->speed = SPEED_UNKNOWN;
+       phydev->duplex = DUPLEX_UNKNOWN;
+
+       if (priv->line_interface == PHY_INTERFACE_MODE_10GBASER)
+               link = mv2222_read_status_10g(phydev);
+       else
+               link = mv2222_read_status_1g(phydev);
+
+       if (link < 0)
+               return link;
+
+       phydev->link = link;
+
+       return 0;
+}
+
+static int mv2222_disable_aneg(struct phy_device *phydev)
+{
+       int ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, MV_1GBX_CTRL,
+                                    BMCR_ANENABLE | BMCR_ANRESTART);
+       if (ret < 0)
+               return ret;
+
+       return mv2222_soft_reset(phydev);
+}
+
+static int mv2222_enable_aneg(struct phy_device *phydev)
+{
+       int ret = phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MV_1GBX_CTRL,
+                                  BMCR_ANENABLE | BMCR_RESET);
+       if (ret < 0)
+               return ret;
+
+       return mv2222_soft_reset(phydev);
+}
+
+static int mv2222_set_sgmii_speed(struct phy_device *phydev)
+{
+       struct mv2222_data *priv = phydev->priv;
+
+       switch (phydev->speed) {
+       default:
+       case SPEED_1000:
+               if ((linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+                                      priv->supported) ||
+                    linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+                                      priv->supported)))
+                       return phy_modify_mmd(phydev, MDIO_MMD_PCS,
+                                             MV_1GBX_CTRL,
+                                             BMCR_SPEED1000 | BMCR_SPEED100,
+                                             BMCR_SPEED1000);
+
+               fallthrough;
+       case SPEED_100:
+               if ((linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+                                      priv->supported) ||
+                    linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+                                      priv->supported)))
+                       return phy_modify_mmd(phydev, MDIO_MMD_PCS,
+                                             MV_1GBX_CTRL,
+                                             BMCR_SPEED1000 | BMCR_SPEED100,
+                                             BMCR_SPEED100);
+               fallthrough;
+       case SPEED_10:
+               if ((linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+                                      priv->supported) ||
+                    linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+                                      priv->supported)))
+                       return phy_modify_mmd(phydev, MDIO_MMD_PCS,
+                                             MV_1GBX_CTRL,
+                                             BMCR_SPEED1000 | BMCR_SPEED100,
+                                             BMCR_SPEED10);
+
+               return -EINVAL;
+       }
+}
+
+static bool mv2222_is_10g_capable(struct phy_device *phydev)
+{
+       struct mv2222_data *priv = phydev->priv;
+
+       return (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+                                 priv->supported) ||
+               linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseCR_Full_BIT,
+                                 priv->supported) ||
+               linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT,
+                                 priv->supported) ||
+               linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT,
+                                 priv->supported) ||
+               linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
+                                 priv->supported) ||
+               linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT,
+                                 priv->supported));
+}
+
+static bool mv2222_is_1gbx_capable(struct phy_device *phydev)
+{
+       struct mv2222_data *priv = phydev->priv;
+
+       return linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
+                                priv->supported);
+}
+
+static int mv2222_config_line(struct phy_device *phydev)
+{
+       struct mv2222_data *priv = phydev->priv;
+
+       switch (priv->line_interface) {
+       case PHY_INTERFACE_MODE_10GBASER:
+               return phy_write_mmd(phydev, MDIO_MMD_VEND2, MV_PCS_CONFIG,
+                                    MV_PCS_HOST_XAUI | MV_PCS_LINE_10GBR);
+       case PHY_INTERFACE_MODE_1000BASEX:
+               return phy_write_mmd(phydev, MDIO_MMD_VEND2, MV_PCS_CONFIG,
+                                    MV_PCS_HOST_XAUI | MV_PCS_LINE_1GBX_AN);
+       case PHY_INTERFACE_MODE_SGMII:
+               return phy_write_mmd(phydev, MDIO_MMD_VEND2, MV_PCS_CONFIG,
+                                    MV_PCS_HOST_XAUI | MV_PCS_LINE_SGMII_AN);
+       default:
+               return -EINVAL;
+       }
+}
+
+static int mv2222_setup_forced(struct phy_device *phydev)
+{
+       struct mv2222_data *priv = phydev->priv;
+       bool changed = false;
+       int ret;
+
+       switch (priv->line_interface) {
+       case PHY_INTERFACE_MODE_10GBASER:
+               if (phydev->speed == SPEED_1000 &&
+                   mv2222_is_1gbx_capable(phydev)) {
+                       priv->line_interface = PHY_INTERFACE_MODE_1000BASEX;
+                       changed = true;
+               }
+
+               break;
+       case PHY_INTERFACE_MODE_1000BASEX:
+               if (phydev->speed == SPEED_10000 &&
+                   mv2222_is_10g_capable(phydev)) {
+                       priv->line_interface = PHY_INTERFACE_MODE_10GBASER;
+                       changed = true;
+               }
+
+               break;
+       case PHY_INTERFACE_MODE_SGMII:
+               ret = mv2222_set_sgmii_speed(phydev);
+               if (ret < 0)
+                       return ret;
+
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       if (changed) {
+               ret = mv2222_config_line(phydev);
+               if (ret < 0)
+                       return ret;
+       }
+
+       return mv2222_disable_aneg(phydev);
+}
+
+static int mv2222_config_aneg(struct phy_device *phydev)
+{
+       struct mv2222_data *priv = phydev->priv;
+       int ret, adv;
+
+       /* SFP is not present, do nothing */
+       if (priv->line_interface == PHY_INTERFACE_MODE_NA)
+               return 0;
+
+       if (phydev->autoneg == AUTONEG_DISABLE ||
+           phydev->speed == SPEED_10000)
+               return mv2222_setup_forced(phydev);
+
+       if (priv->line_interface == PHY_INTERFACE_MODE_10GBASER &&
+           mv2222_is_1gbx_capable(phydev)) {
+               priv->line_interface = PHY_INTERFACE_MODE_1000BASEX;
+               ret = mv2222_config_line(phydev);
+               if (ret < 0)
+                       return ret;
+       }
+
+       adv = linkmode_adv_to_mii_adv_x(priv->supported,
+                                       ETHTOOL_LINK_MODE_1000baseX_Full_BIT);
+
+       ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_1GBX_ADVERTISE,
+                            ADVERTISE_1000XFULL |
+                            ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM,
+                            adv);
+       if (ret < 0)
+               return ret;
+
+       return mv2222_enable_aneg(phydev);
+}
+
+static int mv2222_aneg_done(struct phy_device *phydev)
+{
+       int ret;
+
+       if (mv2222_is_10g_capable(phydev)) {
+               ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1);
+               if (ret < 0)
+                       return ret;
+
+               if (ret & MDIO_STAT1_LSTATUS)
+                       return 1;
+       }
+
+       ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_1GBX_STAT);
+       if (ret < 0)
+               return ret;
+
+       return (ret & BMSR_ANEGCOMPLETE);
+}
+
+static int mv2222_resume(struct phy_device *phydev)
+{
+       return mv2222_tx_enable(phydev);
+}
+
+static int mv2222_suspend(struct phy_device *phydev)
+{
+       return mv2222_tx_disable(phydev);
+}
+
+static int mv2222_get_features(struct phy_device *phydev)
+{
+       /* All supported linkmodes are set at probe */
+
+       return 0;
+}
+
+static int mv2222_config_init(struct phy_device *phydev)
+{
+       if (phydev->interface != PHY_INTERFACE_MODE_XAUI)
+               return -EINVAL;
+
+       phydev->autoneg = AUTONEG_DISABLE;
+
+       return 0;
+}
+
+static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+{
+       struct phy_device *phydev = upstream;
+       phy_interface_t sfp_interface;
+       struct mv2222_data *priv;
+       struct device *dev;
+       int ret;
+
+       __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_supported) = { 0, };
+
+       priv = (struct mv2222_data *)phydev->priv;
+       dev = &phydev->mdio.dev;
+
+       sfp_parse_support(phydev->sfp_bus, id, sfp_supported);
+       sfp_interface = sfp_select_interface(phydev->sfp_bus, sfp_supported);
+
+       dev_info(dev, "%s SFP module inserted\n", phy_modes(sfp_interface));
+
+       if (sfp_interface != PHY_INTERFACE_MODE_10GBASER &&
+           sfp_interface != PHY_INTERFACE_MODE_1000BASEX &&
+           sfp_interface != PHY_INTERFACE_MODE_SGMII) {
+               dev_err(dev, "Incompatible SFP module inserted\n");
+
+               return -EINVAL;
+       }
+
+       priv->line_interface = sfp_interface;
+       linkmode_and(priv->supported, phydev->supported, sfp_supported);
+
+       ret = mv2222_config_line(phydev);
+       if (ret < 0)
+               return ret;
+
+       if (mutex_trylock(&phydev->lock)) {
+               if (priv->line_interface == PHY_INTERFACE_MODE_10GBASER)
+                       ret = mv2222_setup_forced(phydev);
+               else
+                       ret = mv2222_config_aneg(phydev);
+
+               mutex_unlock(&phydev->lock);
+       }
+
+       return ret;
+}
+
+static void mv2222_sfp_remove(void *upstream)
+{
+       struct phy_device *phydev = upstream;
+       struct mv2222_data *priv;
+
+       priv = (struct mv2222_data *)phydev->priv;
+
+       priv->line_interface = PHY_INTERFACE_MODE_NA;
+       linkmode_zero(priv->supported);
+}
+
+static const struct sfp_upstream_ops sfp_phy_ops = {
+       .module_insert = mv2222_sfp_insert,
+       .module_remove = mv2222_sfp_remove,
+       .attach = phy_sfp_attach,
+       .detach = phy_sfp_detach,
+};
+
+static int mv2222_probe(struct phy_device *phydev)
+{
+       struct device *dev = &phydev->mdio.dev;
+       struct mv2222_data *priv = NULL;
+
+       __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
+
+       linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseCR_Full_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT, supported);
+       linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, supported);
+
+       linkmode_copy(phydev->supported, supported);
+
+       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+       if (!priv)
+               return -ENOMEM;
+
+       priv->line_interface = PHY_INTERFACE_MODE_NA;
+       phydev->priv = priv;
+
+       return phy_sfp_probe(phydev, &sfp_phy_ops);
+}
+
+static struct phy_driver mv2222_drivers[] = {
+       {
+               .phy_id = MARVELL_PHY_ID_88X2222,
+               .phy_id_mask = MARVELL_PHY_ID_MASK,
+               .name = "Marvell 88X2222",
+               .get_features = mv2222_get_features,
+               .soft_reset = mv2222_soft_reset,
+               .config_init = mv2222_config_init,
+               .config_aneg = mv2222_config_aneg,
+               .aneg_done = mv2222_aneg_done,
+               .probe = mv2222_probe,
+               .suspend = mv2222_suspend,
+               .resume = mv2222_resume,
+               .read_status = mv2222_read_status,
+       },
+};
+module_phy_driver(mv2222_drivers);
+
+static struct mdio_device_id __maybe_unused mv2222_tbl[] = {
+       { MARVELL_PHY_ID_88X2222, MARVELL_PHY_ID_MASK },
+       { }
+};
+MODULE_DEVICE_TABLE(mdio, mv2222_tbl);
+
+MODULE_DESCRIPTION("Marvell 88x2222 ethernet transceiver driver");
+MODULE_LICENSE("GPL");
index 52b1610eae68bf3d074600977f19cd5ae970ae72..274abd5fbac312a4502ec83140054e0c43889829 100644 (file)
@@ -24,6 +24,7 @@
 #define MARVELL_PHY_ID_88E3016         0x01410e60
 #define MARVELL_PHY_ID_88X3310         0x002b09a0
 #define MARVELL_PHY_ID_88E2110         0x002b09b0
+#define MARVELL_PHY_ID_88X2222         0x01410f10
 
 /* Marvel 88E1111 in Finisar SFP module with modified PHY ID */
 #define MARVELL_PHY_ID_88E1111_FINISAR 0x01ff0cc0