--- /dev/null
+/* GStreamer
+ * Copyright (C) <1999> Erik Walthinsen <omega@cse.ogi.edu>
+ * Copyright (C) 2005-2012 David Schleef <ds@schleef.org>
+ * Copyright (C) <2019> Seungha Yang <seungha.yang@navercorp.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Library General Public License for more details.
+ *
+ * You should have received a copy of the GNU Library General Public
+ * License along with this library; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+/**
+ * SECTION:element-cudascale
+ * @title: cudascale
+ * @see_also: cudaconvert
+ *
+ * This element resizes video frames. By default the element will try to
+ * negotiate to the same size on the source and sinkpad so that no scaling
+ * is needed. It is therefore safe to insert this element in a pipeline to
+ * get more robust behaviour without any cost if no scaling is needed.
+ *
+ * This element supports some YUV formats which are are also supported by
+ * nvidia encoders and decoders.
+ *
+ * ## Example pipelines
+ * |[
+ * gst-launch-1.0 -v filesrc location=videotestsrc.mp4 ! qtdemux ! h264parse ! nvh264dec ! cudaconvert ! cudascale ! cudaconvert ! cudadownload ! autovideosink
+ * ]|
+ * Decode a mp4/h264 and display the video. If the video sink chosen
+ * cannot perform scaling, the video scaling will be performed by cudascale
+ * |[
+ * gst-launch-1.0 -v filesrc location=videotestsrc.mp4 ! qtdemux ! h264parse ! nvh264dec ! cudaconvert ! cudascale ! cudaconvert ! cudadownload ! video/x-raw,width=100 ! autovideosink
+ * ]|
+ * Decode an mp4/h264 and display the video with a width of 100.
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include "gstcudascale.h"
+#include "gstcudautils.h"
+
+GST_DEBUG_CATEGORY_STATIC (gst_cuda_scale_debug);
+#define GST_CAT_DEFAULT gst_cuda_scale_debug
+
+#define gst_cuda_scale_parent_class parent_class
+G_DEFINE_TYPE (GstCudaScale, gst_cuda_scale, GST_TYPE_CUDA_BASE_FILTER);
+
+static GstCaps *gst_cuda_scale_transform_caps (GstBaseTransform * trans,
+ GstPadDirection direction, GstCaps * caps, GstCaps * filter);
+static GstCaps *gst_cuda_scale_fixate_caps (GstBaseTransform * base,
+ GstPadDirection direction, GstCaps * caps, GstCaps * othercaps);
+static gboolean gst_cuda_scale_set_info (GstCudaBaseTransform * filter,
+ GstCaps * incaps, GstVideoInfo * in_info, GstCaps * outcaps,
+ GstVideoInfo * out_info);
+
+static void
+gst_cuda_scale_class_init (GstCudaScaleClass * klass)
+{
+ GstElementClass *element_class = GST_ELEMENT_CLASS (klass);
+ GstBaseTransformClass *trans_class = GST_BASE_TRANSFORM_CLASS (klass);
+ GstCudaBaseTransformClass *btrans_class =
+ GST_CUDA_BASE_TRANSFORM_CLASS (klass);
+
+ gst_element_class_set_static_metadata (element_class,
+ "CUDA Video scaler",
+ "Filter/Converter/Video/Scaler/Hardware",
+ "Resizes Video using CUDA", "Seungha Yang <seungha.yang@navercorp.com>");
+
+ trans_class->transform_caps =
+ GST_DEBUG_FUNCPTR (gst_cuda_scale_transform_caps);
+ trans_class->fixate_caps = GST_DEBUG_FUNCPTR (gst_cuda_scale_fixate_caps);
+
+ btrans_class->set_info = GST_DEBUG_FUNCPTR (gst_cuda_scale_set_info);
+
+ GST_DEBUG_CATEGORY_INIT (gst_cuda_scale_debug,
+ "cudascale", 0, "Video Resize using CUDA");
+}
+
+static void
+gst_cuda_scale_init (GstCudaScale * cuda)
+{
+}
+
+static GstCaps *
+gst_cuda_scale_transform_caps (GstBaseTransform * trans,
+ GstPadDirection direction, GstCaps * caps, GstCaps * filter)
+{
+ GstCaps *ret;
+ GstStructure *structure;
+ GstCapsFeatures *features;
+ gint i, n;
+
+ GST_DEBUG_OBJECT (trans,
+ "Transforming caps %" GST_PTR_FORMAT " in direction %s", caps,
+ (direction == GST_PAD_SINK) ? "sink" : "src");
+
+ ret = gst_caps_new_empty ();
+ n = gst_caps_get_size (caps);
+ for (i = 0; i < n; i++) {
+ structure = gst_caps_get_structure (caps, i);
+ features = gst_caps_get_features (caps, i);
+
+ /* If this is already expressed by the existing caps
+ * skip this structure */
+ if (i > 0 && gst_caps_is_subset_structure_full (ret, structure, features))
+ continue;
+
+ /* make copy */
+ structure = gst_structure_copy (structure);
+
+ gst_structure_set (structure, "width", GST_TYPE_INT_RANGE, 1, G_MAXINT,
+ "height", GST_TYPE_INT_RANGE, 1, G_MAXINT, NULL);
+
+ /* if pixel aspect ratio, make a range of it */
+ if (gst_structure_has_field (structure, "pixel-aspect-ratio")) {
+ gst_structure_set (structure, "pixel-aspect-ratio",
+ GST_TYPE_FRACTION_RANGE, 1, G_MAXINT, G_MAXINT, 1, NULL);
+ }
+
+ gst_caps_append_structure_full (ret, structure,
+ gst_caps_features_copy (features));
+ }
+
+ if (filter) {
+ GstCaps *intersection;
+
+ intersection =
+ gst_caps_intersect_full (filter, ret, GST_CAPS_INTERSECT_FIRST);
+ gst_caps_unref (ret);
+ ret = intersection;
+ }
+
+ GST_DEBUG_OBJECT (trans, "returning caps: %" GST_PTR_FORMAT, ret);
+
+ return ret;
+}
+
+/* fork of gstvideoscale */
+static GstCaps *
+gst_cuda_scale_fixate_caps (GstBaseTransform * base, GstPadDirection direction,
+ GstCaps * caps, GstCaps * othercaps)
+{
+ GstStructure *ins, *outs;
+ const GValue *from_par, *to_par;
+ GValue fpar = { 0, }, tpar = {
+ 0,};
+
+ othercaps = gst_caps_truncate (othercaps);
+ othercaps = gst_caps_make_writable (othercaps);
+
+ GST_DEBUG_OBJECT (base, "trying to fixate othercaps %" GST_PTR_FORMAT
+ " based on caps %" GST_PTR_FORMAT, othercaps, caps);
+
+ ins = gst_caps_get_structure (caps, 0);
+ outs = gst_caps_get_structure (othercaps, 0);
+
+ from_par = gst_structure_get_value (ins, "pixel-aspect-ratio");
+ to_par = gst_structure_get_value (outs, "pixel-aspect-ratio");
+
+ /* If we're fixating from the sinkpad we always set the PAR and
+ * assume that missing PAR on the sinkpad means 1/1 and
+ * missing PAR on the srcpad means undefined
+ */
+ if (direction == GST_PAD_SINK) {
+ if (!from_par) {
+ g_value_init (&fpar, GST_TYPE_FRACTION);
+ gst_value_set_fraction (&fpar, 1, 1);
+ from_par = &fpar;
+ }
+ if (!to_par) {
+ g_value_init (&tpar, GST_TYPE_FRACTION_RANGE);
+ gst_value_set_fraction_range_full (&tpar, 1, G_MAXINT, G_MAXINT, 1);
+ to_par = &tpar;
+ }
+ } else {
+ if (!to_par) {
+ g_value_init (&tpar, GST_TYPE_FRACTION);
+ gst_value_set_fraction (&tpar, 1, 1);
+ to_par = &tpar;
+
+ gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION, 1, 1,
+ NULL);
+ }
+ if (!from_par) {
+ g_value_init (&fpar, GST_TYPE_FRACTION);
+ gst_value_set_fraction (&fpar, 1, 1);
+ from_par = &fpar;
+ }
+ }
+
+ /* we have both PAR but they might not be fixated */
+ {
+ gint from_w, from_h, from_par_n, from_par_d, to_par_n, to_par_d;
+ gint w = 0, h = 0;
+ gint from_dar_n, from_dar_d;
+ gint num, den;
+
+ /* from_par should be fixed */
+ g_return_val_if_fail (gst_value_is_fixed (from_par), othercaps);
+
+ from_par_n = gst_value_get_fraction_numerator (from_par);
+ from_par_d = gst_value_get_fraction_denominator (from_par);
+
+ gst_structure_get_int (ins, "width", &from_w);
+ gst_structure_get_int (ins, "height", &from_h);
+
+ gst_structure_get_int (outs, "width", &w);
+ gst_structure_get_int (outs, "height", &h);
+
+ /* if both width and height are already fixed, we can't do anything
+ * about it anymore */
+ if (w && h) {
+ guint n, d;
+
+ GST_DEBUG_OBJECT (base, "dimensions already set to %dx%d, not fixating",
+ w, h);
+ if (!gst_value_is_fixed (to_par)) {
+ if (gst_video_calculate_display_ratio (&n, &d, from_w, from_h,
+ from_par_n, from_par_d, w, h)) {
+ GST_DEBUG_OBJECT (base, "fixating to_par to %dx%d", n, d);
+ if (gst_structure_has_field (outs, "pixel-aspect-ratio"))
+ gst_structure_fixate_field_nearest_fraction (outs,
+ "pixel-aspect-ratio", n, d);
+ else if (n != d)
+ gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
+ n, d, NULL);
+ }
+ }
+ goto done;
+ }
+
+ /* Calculate input DAR */
+ if (!gst_util_fraction_multiply (from_w, from_h, from_par_n, from_par_d,
+ &from_dar_n, &from_dar_d)) {
+ GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
+ ("Error calculating the output scaled size - integer overflow"));
+ goto done;
+ }
+
+ GST_DEBUG_OBJECT (base, "Input DAR is %d/%d", from_dar_n, from_dar_d);
+
+ /* If either width or height are fixed there's not much we
+ * can do either except choosing a height or width and PAR
+ * that matches the DAR as good as possible
+ */
+ if (h) {
+ GstStructure *tmp;
+ gint set_w, set_par_n, set_par_d;
+
+ GST_DEBUG_OBJECT (base, "height is fixed (%d)", h);
+
+ /* If the PAR is fixed too, there's not much to do
+ * except choosing the width that is nearest to the
+ * width with the same DAR */
+ if (gst_value_is_fixed (to_par)) {
+ to_par_n = gst_value_get_fraction_numerator (to_par);
+ to_par_d = gst_value_get_fraction_denominator (to_par);
+
+ GST_DEBUG_OBJECT (base, "PAR is fixed %d/%d", to_par_n, to_par_d);
+
+ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, to_par_d,
+ to_par_n, &num, &den)) {
+ GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
+ ("Error calculating the output scaled size - integer overflow"));
+ goto done;
+ }
+
+ w = (guint) gst_util_uint64_scale_int_round (h, num, den);
+ gst_structure_fixate_field_nearest_int (outs, "width", w);
+
+ goto done;
+ }
+
+ /* The PAR is not fixed and it's quite likely that we can set
+ * an arbitrary PAR. */
+
+ /* Check if we can keep the input width */
+ tmp = gst_structure_copy (outs);
+ gst_structure_fixate_field_nearest_int (tmp, "width", from_w);
+ gst_structure_get_int (tmp, "width", &set_w);
+
+ /* Might have failed but try to keep the DAR nonetheless by
+ * adjusting the PAR */
+ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, h, set_w,
+ &to_par_n, &to_par_d)) {
+ GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
+ ("Error calculating the output scaled size - integer overflow"));
+ gst_structure_free (tmp);
+ goto done;
+ }
+
+ if (!gst_structure_has_field (tmp, "pixel-aspect-ratio"))
+ gst_structure_set_value (tmp, "pixel-aspect-ratio", to_par);
+ gst_structure_fixate_field_nearest_fraction (tmp, "pixel-aspect-ratio",
+ to_par_n, to_par_d);
+ gst_structure_get_fraction (tmp, "pixel-aspect-ratio", &set_par_n,
+ &set_par_d);
+ gst_structure_free (tmp);
+
+ /* Check if the adjusted PAR is accepted */
+ if (set_par_n == to_par_n && set_par_d == to_par_d) {
+ if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
+ set_par_n != set_par_d)
+ gst_structure_set (outs, "width", G_TYPE_INT, set_w,
+ "pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d,
+ NULL);
+ goto done;
+ }
+
+ /* Otherwise scale the width to the new PAR and check if the
+ * adjusted with is accepted. If all that fails we can't keep
+ * the DAR */
+ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_par_d,
+ set_par_n, &num, &den)) {
+ GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
+ ("Error calculating the output scaled size - integer overflow"));
+ goto done;
+ }
+
+ w = (guint) gst_util_uint64_scale_int_round (h, num, den);
+ gst_structure_fixate_field_nearest_int (outs, "width", w);
+ if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
+ set_par_n != set_par_d)
+ gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
+ set_par_n, set_par_d, NULL);
+
+ goto done;
+ } else if (w) {
+ GstStructure *tmp;
+ gint set_h, set_par_n, set_par_d;
+
+ GST_DEBUG_OBJECT (base, "width is fixed (%d)", w);
+
+ /* If the PAR is fixed too, there's not much to do
+ * except choosing the height that is nearest to the
+ * height with the same DAR */
+ if (gst_value_is_fixed (to_par)) {
+ to_par_n = gst_value_get_fraction_numerator (to_par);
+ to_par_d = gst_value_get_fraction_denominator (to_par);
+
+ GST_DEBUG_OBJECT (base, "PAR is fixed %d/%d", to_par_n, to_par_d);
+
+ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, to_par_d,
+ to_par_n, &num, &den)) {
+ GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
+ ("Error calculating the output scaled size - integer overflow"));
+ goto done;
+ }
+
+ h = (guint) gst_util_uint64_scale_int_round (w, den, num);
+ gst_structure_fixate_field_nearest_int (outs, "height", h);
+
+ goto done;
+ }
+
+ /* The PAR is not fixed and it's quite likely that we can set
+ * an arbitrary PAR. */
+
+ /* Check if we can keep the input height */
+ tmp = gst_structure_copy (outs);
+ gst_structure_fixate_field_nearest_int (tmp, "height", from_h);
+ gst_structure_get_int (tmp, "height", &set_h);
+
+ /* Might have failed but try to keep the DAR nonetheless by
+ * adjusting the PAR */
+ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_h, w,
+ &to_par_n, &to_par_d)) {
+ GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
+ ("Error calculating the output scaled size - integer overflow"));
+ gst_structure_free (tmp);
+ goto done;
+ }
+ if (!gst_structure_has_field (tmp, "pixel-aspect-ratio"))
+ gst_structure_set_value (tmp, "pixel-aspect-ratio", to_par);
+ gst_structure_fixate_field_nearest_fraction (tmp, "pixel-aspect-ratio",
+ to_par_n, to_par_d);
+ gst_structure_get_fraction (tmp, "pixel-aspect-ratio", &set_par_n,
+ &set_par_d);
+ gst_structure_free (tmp);
+
+ /* Check if the adjusted PAR is accepted */
+ if (set_par_n == to_par_n && set_par_d == to_par_d) {
+ if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
+ set_par_n != set_par_d)
+ gst_structure_set (outs, "height", G_TYPE_INT, set_h,
+ "pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d,
+ NULL);
+ goto done;
+ }
+
+ /* Otherwise scale the height to the new PAR and check if the
+ * adjusted with is accepted. If all that fails we can't keep
+ * the DAR */
+ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_par_d,
+ set_par_n, &num, &den)) {
+ GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
+ ("Error calculating the output scaled size - integer overflow"));
+ goto done;
+ }
+
+ h = (guint) gst_util_uint64_scale_int_round (w, den, num);
+ gst_structure_fixate_field_nearest_int (outs, "height", h);
+ if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
+ set_par_n != set_par_d)
+ gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
+ set_par_n, set_par_d, NULL);
+
+ goto done;
+ } else if (gst_value_is_fixed (to_par)) {
+ GstStructure *tmp;
+ gint set_h, set_w, f_h, f_w;
+
+ to_par_n = gst_value_get_fraction_numerator (to_par);
+ to_par_d = gst_value_get_fraction_denominator (to_par);
+
+ /* Calculate scale factor for the PAR change */
+ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, to_par_n,
+ to_par_d, &num, &den)) {
+ GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
+ ("Error calculating the output scaled size - integer overflow"));
+ goto done;
+ }
+
+ /* Try to keep the input height (because of interlacing) */
+ tmp = gst_structure_copy (outs);
+ gst_structure_fixate_field_nearest_int (tmp, "height", from_h);
+ gst_structure_get_int (tmp, "height", &set_h);
+
+ /* This might have failed but try to scale the width
+ * to keep the DAR nonetheless */
+ w = (guint) gst_util_uint64_scale_int_round (set_h, num, den);
+ gst_structure_fixate_field_nearest_int (tmp, "width", w);
+ gst_structure_get_int (tmp, "width", &set_w);
+ gst_structure_free (tmp);
+
+ /* We kept the DAR and the height is nearest to the original height */
+ if (set_w == w) {
+ gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
+ G_TYPE_INT, set_h, NULL);
+ goto done;
+ }
+
+ f_h = set_h;
+ f_w = set_w;
+
+ /* If the former failed, try to keep the input width at least */
+ tmp = gst_structure_copy (outs);
+ gst_structure_fixate_field_nearest_int (tmp, "width", from_w);
+ gst_structure_get_int (tmp, "width", &set_w);
+
+ /* This might have failed but try to scale the width
+ * to keep the DAR nonetheless */
+ h = (guint) gst_util_uint64_scale_int_round (set_w, den, num);
+ gst_structure_fixate_field_nearest_int (tmp, "height", h);
+ gst_structure_get_int (tmp, "height", &set_h);
+ gst_structure_free (tmp);
+
+ /* We kept the DAR and the width is nearest to the original width */
+ if (set_h == h) {
+ gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
+ G_TYPE_INT, set_h, NULL);
+ goto done;
+ }
+
+ /* If all this failed, keep the dimensions with the DAR that was closest
+ * to the correct DAR. This changes the DAR but there's not much else to
+ * do here.
+ */
+ if (set_w * ABS (set_h - h) < ABS (f_w - w) * f_h) {
+ f_h = set_h;
+ f_w = set_w;
+ }
+ gst_structure_set (outs, "width", G_TYPE_INT, f_w, "height", G_TYPE_INT,
+ f_h, NULL);
+ goto done;
+ } else {
+ GstStructure *tmp;
+ gint set_h, set_w, set_par_n, set_par_d, tmp2;
+
+ /* width, height and PAR are not fixed but passthrough is not possible */
+
+ /* First try to keep the height and width as good as possible
+ * and scale PAR */
+ tmp = gst_structure_copy (outs);
+ gst_structure_fixate_field_nearest_int (tmp, "height", from_h);
+ gst_structure_get_int (tmp, "height", &set_h);
+ gst_structure_fixate_field_nearest_int (tmp, "width", from_w);
+ gst_structure_get_int (tmp, "width", &set_w);
+
+ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_h, set_w,
+ &to_par_n, &to_par_d)) {
+ GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
+ ("Error calculating the output scaled size - integer overflow"));
+ gst_structure_free (tmp);
+ goto done;
+ }
+
+ if (!gst_structure_has_field (tmp, "pixel-aspect-ratio"))
+ gst_structure_set_value (tmp, "pixel-aspect-ratio", to_par);
+ gst_structure_fixate_field_nearest_fraction (tmp, "pixel-aspect-ratio",
+ to_par_n, to_par_d);
+ gst_structure_get_fraction (tmp, "pixel-aspect-ratio", &set_par_n,
+ &set_par_d);
+ gst_structure_free (tmp);
+
+ if (set_par_n == to_par_n && set_par_d == to_par_d) {
+ gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
+ G_TYPE_INT, set_h, NULL);
+
+ if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
+ set_par_n != set_par_d)
+ gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
+ set_par_n, set_par_d, NULL);
+ goto done;
+ }
+
+ /* Otherwise try to scale width to keep the DAR with the set
+ * PAR and height */
+ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_par_d,
+ set_par_n, &num, &den)) {
+ GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
+ ("Error calculating the output scaled size - integer overflow"));
+ goto done;
+ }
+
+ w = (guint) gst_util_uint64_scale_int_round (set_h, num, den);
+ tmp = gst_structure_copy (outs);
+ gst_structure_fixate_field_nearest_int (tmp, "width", w);
+ gst_structure_get_int (tmp, "width", &tmp2);
+ gst_structure_free (tmp);
+
+ if (tmp2 == w) {
+ gst_structure_set (outs, "width", G_TYPE_INT, tmp2, "height",
+ G_TYPE_INT, set_h, NULL);
+ if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
+ set_par_n != set_par_d)
+ gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
+ set_par_n, set_par_d, NULL);
+ goto done;
+ }
+
+ /* ... or try the same with the height */
+ h = (guint) gst_util_uint64_scale_int_round (set_w, den, num);
+ tmp = gst_structure_copy (outs);
+ gst_structure_fixate_field_nearest_int (tmp, "height", h);
+ gst_structure_get_int (tmp, "height", &tmp2);
+ gst_structure_free (tmp);
+
+ if (tmp2 == h) {
+ gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
+ G_TYPE_INT, tmp2, NULL);
+ if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
+ set_par_n != set_par_d)
+ gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
+ set_par_n, set_par_d, NULL);
+ goto done;
+ }
+
+ /* If all fails we can't keep the DAR and take the nearest values
+ * for everything from the first try */
+ gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
+ G_TYPE_INT, set_h, NULL);
+ if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
+ set_par_n != set_par_d)
+ gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
+ set_par_n, set_par_d, NULL);
+ }
+ }
+
+done:
+ GST_DEBUG_OBJECT (base, "fixated othercaps to %" GST_PTR_FORMAT, othercaps);
+
+ if (from_par == &fpar)
+ g_value_unset (&fpar);
+ if (to_par == &tpar)
+ g_value_unset (&tpar);
+
+ return othercaps;
+}
+
+static gboolean
+gst_cuda_scale_set_info (GstCudaBaseTransform * btrans, GstCaps * incaps,
+ GstVideoInfo * in_info, GstCaps * outcaps, GstVideoInfo * out_info)
+{
+ if (GST_VIDEO_INFO_WIDTH (in_info) == GST_VIDEO_INFO_WIDTH (out_info) &&
+ GST_VIDEO_INFO_HEIGHT (in_info) == GST_VIDEO_INFO_HEIGHT (out_info) &&
+ GST_VIDEO_INFO_FORMAT (in_info) == GST_VIDEO_INFO_FORMAT (out_info)) {
+ gst_base_transform_set_passthrough (GST_BASE_TRANSFORM (btrans), TRUE);
+ }
+
+ return GST_CUDA_BASE_TRANSFORM_CLASS (parent_class)->set_info (btrans,
+ incaps, in_info, outcaps, out_info);
+}