* @IEEE80211_TX_CTRL_PS_RESPONSE: This frame is a response to a poll
* frame (PS-Poll or uAPSD).
* @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information
+ * @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame
*
* These flags are used in tx_info->control.flags.
*/
IEEE80211_TX_CTRL_PORT_CTRL_PROTO = BIT(0),
IEEE80211_TX_CTRL_PS_RESPONSE = BIT(1),
IEEE80211_TX_CTRL_RATE_INJECT = BIT(2),
+ IEEE80211_TX_CTRL_AMSDU = BIT(3),
};
/*
* Both additional HT limits must be enforced by the low level driver.
* This is defined by the spec (IEEE 802.11-2012 section 8.3.2.2 NOTE 2).
* @support_p2p_ps: indicates whether the STA supports P2P PS mechanism or not.
+ * @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by rate control.
* @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
*/
struct ieee80211_sta {
u8 max_amsdu_subframes;
u16 max_amsdu_len;
bool support_p2p_ps;
+ u16 max_rc_amsdu_len;
struct ieee80211_txq *txq[IEEE80211_NUM_TIDS];
* @IEEE80211_HW_USES_RSS: The device uses RSS and thus requires parallel RX,
* which implies using per-CPU station statistics.
*
+ * @IEEE80211_HW_TX_AMSDU: Hardware (or driver) supports software aggregated
+ * A-MSDU frames. Requires software tx queueing and fast-xmit support.
+ * When not using minstrel/minstrel_ht rate control, the driver must
+ * limit the maximum A-MSDU size based on the current tx rate by setting
+ * max_rc_amsdu_len in struct ieee80211_sta.
+ *
+ * @IEEE80211_HW_TX_FRAG_LIST: Hardware (or driver) supports sending frag_list
+ * skbs, needed for zero-copy software A-MSDU.
+ *
* @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
IEEE80211_HW_NEEDS_UNIQUE_STA_ADDR,
IEEE80211_HW_SUPPORTS_REORDERING_BUFFER,
IEEE80211_HW_USES_RSS,
+ IEEE80211_HW_TX_AMSDU,
+ IEEE80211_HW_TX_FRAG_LIST,
/* keep last, obviously */
NUM_IEEE80211_HW_FLAGS
* size is smaller (an example is LinkSys WRT120N with FW v1.0.07
* build 002 Jun 18 2012).
*
+ * @max_tx_fragments: maximum number of tx buffers per (A)-MSDU, sum
+ * of 1 + skb_shinfo(skb)->nr_frags for each skb in the frag_list.
+ *
* @offchannel_tx_hw_queue: HW queue ID to use for offchannel TX
* (if %IEEE80211_HW_QUEUE_CONTROL is set)
*
u8 max_rate_tries;
u8 max_rx_aggregation_subframes;
u8 max_tx_aggregation_subframes;
+ u8 max_tx_fragments;
u8 offchannel_tx_hw_queue;
u8 radiotap_mcs_details;
u16 radiotap_vht_details;
out:
spin_unlock_bh(&txqi->queue.lock);
+ if (skb && skb_has_frag_list(skb) &&
+ !ieee80211_hw_check(&local->hw, TX_FRAG_LIST))
+ skb_linearize(skb);
+
return skb;
}
EXPORT_SYMBOL(ieee80211_tx_dequeue);
kfree_rcu(fast_tx, rcu_head);
}
+static bool ieee80211_amsdu_realloc_pad(struct ieee80211_local *local,
+ struct sk_buff *skb, int headroom,
+ int *subframe_len)
+{
+ int amsdu_len = *subframe_len + sizeof(struct ethhdr);
+ int padding = (4 - amsdu_len) & 3;
+
+ if (skb_headroom(skb) < headroom || skb_tailroom(skb) < padding) {
+ I802_DEBUG_INC(local->tx_expand_skb_head);
+
+ if (pskb_expand_head(skb, headroom, padding, GFP_ATOMIC)) {
+ wiphy_debug(local->hw.wiphy,
+ "failed to reallocate TX buffer\n");
+ return false;
+ }
+ }
+
+ if (padding) {
+ *subframe_len += padding;
+ memset(skb_put(skb, padding), 0, padding);
+ }
+
+ return true;
+}
+
+static bool ieee80211_amsdu_prepare_head(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_fast_tx *fast_tx,
+ struct sk_buff *skb)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr;
+ struct ethhdr amsdu_hdr;
+ int hdr_len = fast_tx->hdr_len - sizeof(rfc1042_header);
+ int subframe_len = skb->len - hdr_len;
+ void *data;
+ u8 *qc;
+
+ if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)
+ return false;
+
+ if (info->control.flags & IEEE80211_TX_CTRL_AMSDU)
+ return true;
+
+ if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(amsdu_hdr),
+ &subframe_len))
+ return false;
+
+ amsdu_hdr.h_proto = cpu_to_be16(subframe_len);
+ memcpy(amsdu_hdr.h_source, skb->data + fast_tx->sa_offs, ETH_ALEN);
+ memcpy(amsdu_hdr.h_dest, skb->data + fast_tx->da_offs, ETH_ALEN);
+
+ data = skb_push(skb, sizeof(amsdu_hdr));
+ memmove(data, data + sizeof(amsdu_hdr), hdr_len);
+ memcpy(data + hdr_len, &amsdu_hdr, sizeof(amsdu_hdr));
+
+ hdr = data;
+ qc = ieee80211_get_qos_ctl(hdr);
+ *qc |= IEEE80211_QOS_CTL_A_MSDU_PRESENT;
+
+ info->control.flags |= IEEE80211_TX_CTRL_AMSDU;
+
+ return true;
+}
+
+static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata,
+ struct sta_info *sta,
+ struct ieee80211_fast_tx *fast_tx,
+ struct sk_buff *skb)
+{
+ struct ieee80211_local *local = sdata->local;
+ u8 tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
+ struct ieee80211_txq *txq = sta->sta.txq[tid];
+ struct txq_info *txqi;
+ struct sk_buff **frag_tail, *head;
+ int subframe_len = skb->len - ETH_ALEN;
+ u8 max_subframes = sta->sta.max_amsdu_subframes;
+ int max_frags = local->hw.max_tx_fragments;
+ int max_amsdu_len = sta->sta.max_amsdu_len;
+ __be16 len;
+ void *data;
+ bool ret = false;
+ int n = 1, nfrags;
+
+ if (!ieee80211_hw_check(&local->hw, TX_AMSDU))
+ return false;
+
+ if (!txq)
+ return false;
+
+ txqi = to_txq_info(txq);
+ if (test_bit(IEEE80211_TXQ_NO_AMSDU, &txqi->flags))
+ return false;
+
+ if (sta->sta.max_rc_amsdu_len)
+ max_amsdu_len = min_t(int, max_amsdu_len,
+ sta->sta.max_rc_amsdu_len);
+
+ spin_lock_bh(&txqi->queue.lock);
+
+ head = skb_peek_tail(&txqi->queue);
+ if (!head)
+ goto out;
+
+ if (skb->len + head->len > max_amsdu_len)
+ goto out;
+
+ if (!ieee80211_amsdu_prepare_head(sdata, fast_tx, head))
+ goto out;
+
+ nfrags = 1 + skb_shinfo(skb)->nr_frags;
+ nfrags += 1 + skb_shinfo(head)->nr_frags;
+ frag_tail = &skb_shinfo(head)->frag_list;
+ while (*frag_tail) {
+ nfrags += 1 + skb_shinfo(*frag_tail)->nr_frags;
+ frag_tail = &(*frag_tail)->next;
+ n++;
+ }
+
+ if (max_subframes && n > max_subframes)
+ goto out;
+
+ if (max_frags && nfrags > max_frags)
+ goto out;
+
+ if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(rfc1042_header) + 2,
+ &subframe_len))
+ goto out;
+
+ ret = true;
+ data = skb_push(skb, ETH_ALEN + 2);
+ memmove(data, data + ETH_ALEN + 2, 2 * ETH_ALEN);
+
+ data += 2 * ETH_ALEN;
+ len = cpu_to_be16(subframe_len);
+ memcpy(data, &len, 2);
+ memcpy(data + 2, rfc1042_header, sizeof(rfc1042_header));
+
+ head->len += skb->len;
+ head->data_len += skb->len;
+ *frag_tail = skb;
+
+out:
+ spin_unlock_bh(&txqi->queue.lock);
+
+ return ret;
+}
+
static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata,
struct net_device *dev, struct sta_info *sta,
struct ieee80211_fast_tx *fast_tx,
ieee80211_tx_stats(dev, skb->len + extra_head);
+ if ((hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) &&
+ ieee80211_amsdu_aggregate(sdata, sta, fast_tx, skb))
+ return true;
+
/* will not be crypto-handled beyond what we do here, so use false
* as the may-encrypt argument for the resize to not account for
* more room than we already have in 'extra_head'
projects / platform / kernel / linux-exynos.git / commitdiff