i2o debug output cleanup

Fix output of i2o debug messages, extra KERN_ are removed.

Signed-off-by: Vasily Averin <vvs@sw.ru>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Acked-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/message/i2o/debug.c b/drivers/message/i2o/debug.c
index 8abe45e..ce62d8b 100644 (file)
--- a/drivers/message/i2o/debug.c
+++ b/drivers/message/i2o/debug.c
@@ -24,7 +24,7 @@ void i2o_report_status(const char *severity, const char *str,
        if (cmd == I2O_CMD_UTIL_EVT_REGISTER)
                return;         // No status in this reply
 
-       printk(KERN_DEBUG "%s%s: ", severity, str);
+       printk("%s%s: ", severity, str);
 
        if (cmd < 0x1F)         // Utility cmd
                i2o_report_util_cmd(cmd);
@@ -32,7 +32,7 @@ void i2o_report_status(const char *severity, const char *str,
        else if (cmd >= 0xA0 && cmd <= 0xEF)    // Executive cmd
                i2o_report_exec_cmd(cmd);
        else
-               printk(KERN_DEBUG "Cmd = %0#2x, ", cmd);        // Other cmds
+               printk("Cmd = %0#2x, ", cmd);   // Other cmds
 
        if (msg[0] & MSG_FAIL) {
                i2o_report_fail_status(req_status, msg);
@@ -44,7 +44,7 @@ void i2o_report_status(const char *severity, const char *str,
        if (cmd < 0x1F || (cmd >= 0xA0 && cmd <= 0xEF))
                i2o_report_common_dsc(detailed_status);
        else
-               printk(KERN_DEBUG " / DetailedStatus = %0#4x.\n",
+               printk(" / DetailedStatus = %0#4x.\n",
                       detailed_status);
 }
 
@@ -89,10 +89,10 @@ static void i2o_report_fail_status(u8 req_status, u32 * msg)
        };
 
        if (req_status == I2O_FSC_TRANSPORT_UNKNOWN_FAILURE)
-               printk(KERN_DEBUG "TRANSPORT_UNKNOWN_FAILURE (%0#2x).\n",
+               printk("TRANSPORT_UNKNOWN_FAILURE (%0#2x).\n",
                       req_status);
        else
-               printk(KERN_DEBUG "TRANSPORT_%s.\n",
+               printk("TRANSPORT_%s.\n",
                       FAIL_STATUS[req_status & 0x0F]);
 
        /* Dump some details */
@@ -104,7 +104,7 @@ static void i2o_report_fail_status(u8 req_status, u32 * msg)
        printk(KERN_ERR "  FailingHostUnit = 0x%04X,  FailingIOP = 0x%03X\n",
               msg[5] >> 16, msg[5] & 0xFFF);
 
-       printk(KERN_ERR "  Severity:  0x%02X ", (msg[4] >> 16) & 0xFF);
+       printk(KERN_ERR "  Severity:  0x%02X\n", (msg[4] >> 16) & 0xFF);
        if (msg[4] & (1 << 16))
                printk(KERN_DEBUG "(FormatError), "
                       "this msg can never be delivered/processed.\n");
@@ -142,9 +142,9 @@ static void i2o_report_common_status(u8 req_status)
        };
 
        if (req_status >= ARRAY_SIZE(REPLY_STATUS))
-               printk(KERN_DEBUG "RequestStatus = %0#2x", req_status);
+               printk("RequestStatus = %0#2x", req_status);
        else
-               printk(KERN_DEBUG "%s", REPLY_STATUS[req_status]);
+               printk("%s", REPLY_STATUS[req_status]);
 }
 
 /*
@@ -187,10 +187,10 @@ static void i2o_report_common_dsc(u16 detailed_status)
        };
 
        if (detailed_status > I2O_DSC_DEVICE_NOT_AVAILABLE)
-               printk(KERN_DEBUG " / DetailedStatus = %0#4x.\n",
+               printk(" / DetailedStatus = %0#4x.\n",
                       detailed_status);
        else
-               printk(KERN_DEBUG " / %s.\n", COMMON_DSC[detailed_status]);
+               printk(" / %s.\n", COMMON_DSC[detailed_status]);
 }
 
 /*
@@ -200,49 +200,49 @@ static void i2o_report_util_cmd(u8 cmd)
 {
        switch (cmd) {
        case I2O_CMD_UTIL_NOP:
-               printk(KERN_DEBUG "UTIL_NOP, ");
+               printk("UTIL_NOP, ");
                break;
        case I2O_CMD_UTIL_ABORT:
-               printk(KERN_DEBUG "UTIL_ABORT, ");
+               printk("UTIL_ABORT, ");
                break;
        case I2O_CMD_UTIL_CLAIM:
-               printk(KERN_DEBUG "UTIL_CLAIM, ");
+               printk("UTIL_CLAIM, ");
                break;
        case I2O_CMD_UTIL_RELEASE:
-               printk(KERN_DEBUG "UTIL_CLAIM_RELEASE, ");
+               printk("UTIL_CLAIM_RELEASE, ");
                break;
        case I2O_CMD_UTIL_CONFIG_DIALOG:
-               printk(KERN_DEBUG "UTIL_CONFIG_DIALOG, ");
+               printk("UTIL_CONFIG_DIALOG, ");
                break;
        case I2O_CMD_UTIL_DEVICE_RESERVE:
-               printk(KERN_DEBUG "UTIL_DEVICE_RESERVE, ");
+               printk("UTIL_DEVICE_RESERVE, ");
                break;
        case I2O_CMD_UTIL_DEVICE_RELEASE:
-               printk(KERN_DEBUG "UTIL_DEVICE_RELEASE, ");
+               printk("UTIL_DEVICE_RELEASE, ");
                break;
        case I2O_CMD_UTIL_EVT_ACK:
-               printk(KERN_DEBUG "UTIL_EVENT_ACKNOWLEDGE, ");
+               printk("UTIL_EVENT_ACKNOWLEDGE, ");
                break;
        case I2O_CMD_UTIL_EVT_REGISTER:
-               printk(KERN_DEBUG "UTIL_EVENT_REGISTER, ");
+               printk("UTIL_EVENT_REGISTER, ");
                break;
        case I2O_CMD_UTIL_LOCK:
-               printk(KERN_DEBUG "UTIL_LOCK, ");
+               printk("UTIL_LOCK, ");
                break;
        case I2O_CMD_UTIL_LOCK_RELEASE:
-               printk(KERN_DEBUG "UTIL_LOCK_RELEASE, ");
+               printk("UTIL_LOCK_RELEASE, ");
                break;
        case I2O_CMD_UTIL_PARAMS_GET:
-               printk(KERN_DEBUG "UTIL_PARAMS_GET, ");
+               printk("UTIL_PARAMS_GET, ");
                break;
        case I2O_CMD_UTIL_PARAMS_SET:
-               printk(KERN_DEBUG "UTIL_PARAMS_SET, ");
+               printk("UTIL_PARAMS_SET, ");
                break;
        case I2O_CMD_UTIL_REPLY_FAULT_NOTIFY:
-               printk(KERN_DEBUG "UTIL_REPLY_FAULT_NOTIFY, ");
+               printk("UTIL_REPLY_FAULT_NOTIFY, ");
                break;
        default:
-               printk(KERN_DEBUG "Cmd = %0#2x, ", cmd);
+               printk("Cmd = %0#2x, ", cmd);
        }
 }
 
@@ -253,106 +253,106 @@ static void i2o_report_exec_cmd(u8 cmd)
 {
        switch (cmd) {
        case I2O_CMD_ADAPTER_ASSIGN:
-               printk(KERN_DEBUG "EXEC_ADAPTER_ASSIGN, ");
+               printk("EXEC_ADAPTER_ASSIGN, ");
                break;
        case I2O_CMD_ADAPTER_READ:
-               printk(KERN_DEBUG "EXEC_ADAPTER_READ, ");
+               printk("EXEC_ADAPTER_READ, ");
                break;
        case I2O_CMD_ADAPTER_RELEASE:
-               printk(KERN_DEBUG "EXEC_ADAPTER_RELEASE, ");
+               printk("EXEC_ADAPTER_RELEASE, ");
                break;
        case I2O_CMD_BIOS_INFO_SET:
-               printk(KERN_DEBUG "EXEC_BIOS_INFO_SET, ");
+               printk("EXEC_BIOS_INFO_SET, ");
                break;
        case I2O_CMD_BOOT_DEVICE_SET:
-               printk(KERN_DEBUG "EXEC_BOOT_DEVICE_SET, ");
+               printk("EXEC_BOOT_DEVICE_SET, ");
                break;
        case I2O_CMD_CONFIG_VALIDATE:
-               printk(KERN_DEBUG "EXEC_CONFIG_VALIDATE, ");
+               printk("EXEC_CONFIG_VALIDATE, ");
                break;
        case I2O_CMD_CONN_SETUP:
-               printk(KERN_DEBUG "EXEC_CONN_SETUP, ");
+               printk("EXEC_CONN_SETUP, ");
                break;
        case I2O_CMD_DDM_DESTROY:
-               printk(KERN_DEBUG "EXEC_DDM_DESTROY, ");
+               printk("EXEC_DDM_DESTROY, ");
                break;
        case I2O_CMD_DDM_ENABLE:
-               printk(KERN_DEBUG "EXEC_DDM_ENABLE, ");
+               printk("EXEC_DDM_ENABLE, ");
                break;
        case I2O_CMD_DDM_QUIESCE:
-               printk(KERN_DEBUG "EXEC_DDM_QUIESCE, ");
+               printk("EXEC_DDM_QUIESCE, ");
                break;
        case I2O_CMD_DDM_RESET:
-               printk(KERN_DEBUG "EXEC_DDM_RESET, ");
+               printk("EXEC_DDM_RESET, ");
                break;
        case I2O_CMD_DDM_SUSPEND:
-               printk(KERN_DEBUG "EXEC_DDM_SUSPEND, ");
+               printk("EXEC_DDM_SUSPEND, ");
                break;
        case I2O_CMD_DEVICE_ASSIGN:
-               printk(KERN_DEBUG "EXEC_DEVICE_ASSIGN, ");
+               printk("EXEC_DEVICE_ASSIGN, ");
                break;
        case I2O_CMD_DEVICE_RELEASE:
-               printk(KERN_DEBUG "EXEC_DEVICE_RELEASE, ");
+               printk("EXEC_DEVICE_RELEASE, ");
                break;
        case I2O_CMD_HRT_GET:
-               printk(KERN_DEBUG "EXEC_HRT_GET, ");
+               printk("EXEC_HRT_GET, ");
                break;
        case I2O_CMD_ADAPTER_CLEAR:
-               printk(KERN_DEBUG "EXEC_IOP_CLEAR, ");
+               printk("EXEC_IOP_CLEAR, ");
                break;
        case I2O_CMD_ADAPTER_CONNECT:
-               printk(KERN_DEBUG "EXEC_IOP_CONNECT, ");
+               printk("EXEC_IOP_CONNECT, ");
                break;
        case I2O_CMD_ADAPTER_RESET:
-               printk(KERN_DEBUG "EXEC_IOP_RESET, ");
+               printk("EXEC_IOP_RESET, ");
                break;
        case I2O_CMD_LCT_NOTIFY:
-               printk(KERN_DEBUG "EXEC_LCT_NOTIFY, ");
+               printk("EXEC_LCT_NOTIFY, ");
                break;
        case I2O_CMD_OUTBOUND_INIT:
-               printk(KERN_DEBUG "EXEC_OUTBOUND_INIT, ");
+               printk("EXEC_OUTBOUND_INIT, ");
                break;
        case I2O_CMD_PATH_ENABLE:
-               printk(KERN_DEBUG "EXEC_PATH_ENABLE, ");
+               printk("EXEC_PATH_ENABLE, ");
                break;
        case I2O_CMD_PATH_QUIESCE:
-               printk(KERN_DEBUG "EXEC_PATH_QUIESCE, ");
+               printk("EXEC_PATH_QUIESCE, ");
                break;
        case I2O_CMD_PATH_RESET:
-               printk(KERN_DEBUG "EXEC_PATH_RESET, ");
+               printk("EXEC_PATH_RESET, ");
                break;
        case I2O_CMD_STATIC_MF_CREATE:
-               printk(KERN_DEBUG "EXEC_STATIC_MF_CREATE, ");
+               printk("EXEC_STATIC_MF_CREATE, ");
                break;
        case I2O_CMD_STATIC_MF_RELEASE:
-               printk(KERN_DEBUG "EXEC_STATIC_MF_RELEASE, ");
+               printk("EXEC_STATIC_MF_RELEASE, ");
                break;
        case I2O_CMD_STATUS_GET:
-               printk(KERN_DEBUG "EXEC_STATUS_GET, ");
+               printk("EXEC_STATUS_GET, ");
                break;
        case I2O_CMD_SW_DOWNLOAD:
-               printk(KERN_DEBUG "EXEC_SW_DOWNLOAD, ");
+               printk("EXEC_SW_DOWNLOAD, ");
                break;
        case I2O_CMD_SW_UPLOAD:
-               printk(KERN_DEBUG "EXEC_SW_UPLOAD, ");
+               printk("EXEC_SW_UPLOAD, ");
                break;
        case I2O_CMD_SW_REMOVE:
-               printk(KERN_DEBUG "EXEC_SW_REMOVE, ");
+               printk("EXEC_SW_REMOVE, ");
                break;
        case I2O_CMD_SYS_ENABLE:
-               printk(KERN_DEBUG "EXEC_SYS_ENABLE, ");
+               printk("EXEC_SYS_ENABLE, ");
                break;
        case I2O_CMD_SYS_MODIFY:
-               printk(KERN_DEBUG "EXEC_SYS_MODIFY, ");
+               printk("EXEC_SYS_MODIFY, ");
                break;
        case I2O_CMD_SYS_QUIESCE:
-               printk(KERN_DEBUG "EXEC_SYS_QUIESCE, ");
+               printk("EXEC_SYS_QUIESCE, ");
                break;
        case I2O_CMD_SYS_TAB_SET:
-               printk(KERN_DEBUG "EXEC_SYS_TAB_SET, ");
+               printk("EXEC_SYS_TAB_SET, ");
                break;
        default:
-               printk(KERN_DEBUG "Cmd = %#02x, ", cmd);
+               printk("Cmd = %#02x, ", cmd);
        }
 }
 
@@ -361,28 +361,28 @@ void i2o_debug_state(struct i2o_controller *c)
        printk(KERN_INFO "%s: State = ", c->name);
        switch (((i2o_status_block *) c->status_block.virt)->iop_state) {
        case 0x01:
-               printk(KERN_DEBUG "INIT\n");
+               printk("INIT\n");
                break;
        case 0x02:
-               printk(KERN_DEBUG "RESET\n");
+               printk("RESET\n");
                break;
        case 0x04:
-               printk(KERN_DEBUG "HOLD\n");
+               printk("HOLD\n");
                break;
        case 0x05:
-               printk(KERN_DEBUG "READY\n");
+               printk("READY\n");
                break;
        case 0x08:
-               printk(KERN_DEBUG "OPERATIONAL\n");
+               printk("OPERATIONAL\n");
                break;
        case 0x10:
-               printk(KERN_DEBUG "FAILED\n");
+               printk("FAILED\n");
                break;
        case 0x11:
-               printk(KERN_DEBUG "FAULTED\n");
+               printk("FAULTED\n");
                break;
        default:
-               printk(KERN_DEBUG "%x (unknown !!)\n",
+               printk("%x (unknown !!)\n",
                       ((i2o_status_block *) c->status_block.virt)->iop_state);
        }
 };