ARM: dts: at91: add CalAmp LMU5000 board

Add CalAmp LMU5000 board. The base device tree is from OpenWrt tree and
with the addition of this patch there will be no need to maintain it
separatelly in OpenWrt.

[porter.adam: original author of patch in OpenWrt]
[claudiu.beznea: fixed compilation warnings, use &<lable> syntax,
 sorted nodes in alphabetical order, adapted flash to new support
 in kernel 5.14, use proper compatibles according to kernel 5.14,
 use macros instead of hard coded numbers for pinctrl phandles and
 for all pinctrl references, add pinctrl-names, pinctrl-X where
 necessary]

Signed-off-by: Adam Porter <porter.adam@gmail.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210816064416.1630674-5-claudiu.beznea@microchip.com

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e0934180724d86c704768e46600daaa828dc2c9..46d49fdfe8ad6b101e64270af608db9adde53e72 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -25,6 +25,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
        usb_a9263.dtb \
        at91-foxg20.dtb \
        at91-kizbox.dtb \
+       at91-lmu5000.dtb \
        at91sam9g20ek.dtb \
        at91sam9g20ek_2mmc.dtb \
        tny_a9g20.dtb \

diff --git a/arch/arm/boot/dts/at91-lmu5000.dts b/arch/arm/boot/dts/at91-lmu5000.dts
new file mode 100644 (file)
index 0000000..f8863d7
--- /dev/null
+++ b/arch/arm/boot/dts/at91-lmu5000.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for CalAmp LMU5000 board
+ *
+ * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+       model = "CalAmp LMU5000";
+       compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
+
+       chosen {
+               bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
+       };
+
+       memory {
+               reg = <0x20000000 0x4000000>;
+       };
+
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               main_clock: clock@0 {
+                       compatible = "atmel,osc", "fixed-clock";
+                       clock-frequency = <18432000>;
+               };
+       };
+};
+
+&dbgu {
+       status = "okay";
+};
+
+&ebi {
+       status = "okay";
+
+       nand_controller: nand-controller {
+               pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+               pinctrl-names = "default";
+               status = "okay";
+
+               nand@3 {
+                       reg = <0x3 0x0 0x800000>;
+                       rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+                       cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+                       nand-bus-width = <8>;
+                       nand-ecc-mode = "soft";
+                       nand-on-flash-bbt;
+                       label = "atmel_nand";
+                       status = "okay";
+
+                       partitions {
+                               compatible = "fixed-partitions";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               kernel@0 {
+                                       label = "kernel";
+                                       reg = <0x0 0x400000>;
+                               };
+
+                               rootfs@400000 {
+                                       label = "rootfs";
+                                       reg = <0x400000 0x3C00000>;
+                               };
+
+                               user1@4000000 {
+                                       label = "user1";
+                                       reg = <0x4000000 0x2000000>;
+                               };
+
+                               user2@6000000 {
+                                       label = "user2";
+                                       reg = <0x6000000 0x2000000>;
+                               };
+                       };
+               };
+       };
+};
+
+&macb0 {
+       phy-mode = "mii";
+       status = "okay";
+};
+
+&pinctrl {
+       board {
+               pinctrl_pck0_as_mck: pck0_as_mck {
+                       atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+               };
+       };
+
+       usb0 {
+               pinctrl_usb1_vbus_gpio: usb0_vbus_gpio {
+                       atmel,pins = <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+               };
+       };
+};
+
+&ssc0 {
+       status = "okay";
+       pinctrl-0 = <&pinctrl_ssc0_tx>;
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&usart0 {
+       pinctrl-0 =
+               <&pinctrl_usart0
+                &pinctrl_usart0_rts
+                &pinctrl_usart0_cts
+                &pinctrl_usart0_dtr_dsr
+                &pinctrl_usart0_dcd
+                &pinctrl_usart0_ri>;
+       status = "okay";
+};
+
+&usart2 {
+       status = "okay";
+};
+
+&usb0 {
+       num-ports = <2>;
+       status = "okay";
+};
+
+&usb1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+       atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
+
+&watchdog {
+       status = "okay";
+};