void spi_init_f(void)
{
-#ifdef CONFIG_SC520_CDP_USE_SPI
+#ifdef CONFIG_SYS_SC520_CDP_USE_SPI
spi_eeprom_probe(1);
#endif
-#ifdef CONFIG_SC520_CDP_USE_MW
+#ifdef CONFIG_SYS_SC520_CDP_USE_MW
mw_eeprom_probe(2);
#endif
}
offset |= addr[i];
}
-#ifdef CONFIG_SC520_CDP_USE_SPI
+#ifdef CONFIG_SYS_SC520_CDP_USE_SPI
res = spi_eeprom_read(1, offset, buffer, len);
#endif
-#ifdef CONFIG_SC520_CDP_USE_MW
+#ifdef CONFIG_SYS_SC520_CDP_USE_MW
res = mw_eeprom_read(2, offset, buffer, len);
#endif
-#if !defined(CONFIG_SC520_CDP_USE_SPI) && !defined(CONFIG_SC520_CDP_USE_MW)
+#if !defined(CONFIG_SYS_SC520_CDP_USE_SPI) && !defined(CONFIG_SYS_SC520_CDP_USE_MW)
res = 0;
#endif
return res;
offset |= addr[i];
}
-#ifdef CONFIG_SC520_CDP_USE_SPI
+#ifdef CONFIG_SYS_SC520_CDP_USE_SPI
res = spi_eeprom_write(1, offset, buffer, len);
#endif
-#ifdef CONFIG_SC520_CDP_USE_MW
+#ifdef CONFIG_SYS_SC520_CDP_USE_MW
res = mw_eeprom_write(2, offset, buffer, len);
#endif
-#if !defined(CONFIG_SC520_CDP_USE_SPI) && !defined(CONFIG_SC520_CDP_USE_MW)
+#if !defined(CONFIG_SYS_SC520_CDP_USE_SPI) && !defined(CONFIG_SYS_SC520_CDP_USE_MW)
res = 0;
#endif
return res;
#include <common.h>
#include <config.h>
#include <pci.h>
-#ifdef CONFIG_SC520_SSI
+#ifdef CONFIG_SYS_SC520_SSI
#include <asm/ic/ssi.h>
#endif
#include <asm/io.h>
#endif
-#ifdef CONFIG_SYS_TIMER_SC520
+#ifdef CONFIG_SYS_SC520_TIMER
void reset_timer(void)
return read_mmcr_byte(SC520_SSIRCV);
}
-#ifdef CONFIG_SYS_RESET_SC520
+#ifdef CONFIG_SYS_SC520_RESET
void reset_cpu(ulong addr)
{
printf("Resetting using SC520 MMCR\n");
}
-#ifdef CONFIG_SYS_TIMER_GENERIC
+#ifdef CONFIG_SYS_GENERIC_TIMER
/* the unit for these is CONFIG_SYS_HZ */
#define DEBUG_PARSER
#define CONFIG_X86 1 /* Intel X86 CPU */
-#define CONFIG_SC520 1 /* AMD SC520 */
-#define CONFIG_SC520_SSI
+#define CONFIG_SYS_SC520 1 /* AMD SC520 */
+#define CONFIG_SYS_SC520_SSI
#define CONFIG_SHOW_BOOT_PROGRESS 1
#define CONFIG_LAST_STAGE_INIT 1
* CPU Features
*/
#define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */
-#undef CONFIG_SYS_RESET_SC520 /* use SC520 MMCR's to reset cpu */
-#define CONFIG_SYS_TIMER_SC520 /* use SC520 swtimers */
-#undef CONFIG_SYS_TIMER_GENERIC /* use the i8254 PIT timers */
-#undef CONFIG_SYS_TIMER_TSC /* use the Pentium TSC timers */
+#undef CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */
+#define CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */
+#undef CONFIG_SYS_GENERIC_TIMER /* use the i8254 PIT timers */
+#undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */
#define CONFIG_SYS_USE_SIO_UART 0 /* prefer the uarts on the SIO to those
* in the SC520 on the CDP */
*/
#define CONFIG_X86 1 /* This is a X86 CPU */
-#define CONFIG_SC520 1 /* Include support for AMD SC520 */
+#define CONFIG_SYS_SC520 1 /* Include support for AMD SC520 */
#define CONFIG_ALI152X 1 /* Include support for Ali 152x SIO */
#define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6 /* 6T */
#define CONFIG_SYS_SDRAM_CAS_LATENCY_3T
#define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */
-#undef CONFIG_SYS_RESET_SC520 /* use SC520 MMCR's to reset cpu */
-#undef CONFIG_SYS_TIMER_SC520 /* use SC520 swtimers */
-#define CONFIG_SYS_TIMER_GENERIC 1 /* use the i8254 PIT timers */
-#undef CONFIG_SYS_TIMER_TSC /* use the Pentium TSC timers */
+#undef CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */
+#undef CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */
+#define CONFIG_SYS_GENERIC_TIMER 1 /* use the i8254 PIT timers */
+#undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */
#define CONFIG_SYS_USE_SIO_UART 0 /* prefer the uarts on the SIO to those
* in the SC520 on the CDP */
#define CONFIG_SPI
#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment EEPROM 16k is SPI is used or 128 bytes if MW is used*/
#define CONFIG_ENV_OFFSET 0
-#define CONFIG_SC520_CDP_USE_SPI /* Store configuration in the SPI part */
-#undef CONFIG_SC520_CDP_USE_MW /* Store configuration in the MicroWire part */
+#define CONFIG_SYS_SC520_CDP_USE_SPI /* Store configuration in the SPI part */
+#undef CONFIG_SYS_SC520_CDP_USE_MW /* Store configuration in the MicroWire part */
#define CONFIG_SPI_X 1
/*
*/
#define CONFIG_X86 1 /* This is a X86 CPU */
-#define CONFIG_SC520 1 /* Include support for AMD SC520 */
+#define CONFIG_SYS_SC520 1 /* Include support for AMD SC520 */
#define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6 /* 6T */
#define CONFIG_SYS_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
#define CONFIG_SYS_SDRAM_CAS_LATENCY_3T
#define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */
-#undef CONFIG_SYS_RESET_SC520 /* use SC520 MMCR's to reset cpu */
-#undef CONFIG_SYS_TIMER_SC520 /* use SC520 swtimers */
-#define CONFIG_SYS_TIMER_GENERIC 1 /* use the i8254 PIT timers */
-#undef CONFIG_SYS_TIMER_TSC /* use the Pentium TSC timers */
+#undef CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */
+#undef CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */
+#define CONFIG_SYS_GENERIC_TIMER 1 /* use the i8254 PIT timers */
+#undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */
#define CONFIG_SYS_STACK_SIZE 0x8000 /* Size of bootloader stack */