net: pcnet: Wrap name and enetaddr into private data
authorMarek Vasut <marek.vasut@gmail.com>
Sun, 17 May 2020 16:24:22 +0000 (18:24 +0200)
committerDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
Mon, 29 Jun 2020 20:36:35 +0000 (22:36 +0200)
Instead of using the non-DM-only name and enetaddr in struct eth_device,
add pointers into the private data which can either point to that non-DM
name or a DM one later on.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
drivers/net/pcnet.c

index b0bd4af..669b256 100644 (file)
@@ -84,6 +84,8 @@ struct pcnet_priv {
        struct pcnet_uncached_priv *uc;
        pci_dev_t dev;
        void __iomem *iobase;
+       char *name;
+       u8 *enetaddr;
        int cur_rx;
        int cur_tx;
 };
@@ -153,7 +155,7 @@ static int pcnet_probe(struct eth_device *dev, bd_t *bis, int dev_nr)
 
        /* Check if register access is working */
        if (pcnet_read_csr(lp, 0) != 4 || !pcnet_check(lp)) {
-               printf("%s: CSR register access check failed\n", dev->name);
+               printf("%s: CSR register access check failed\n", lp->name);
                return -1;
        }
 
@@ -174,7 +176,7 @@ static int pcnet_probe(struct eth_device *dev, bd_t *bis, int dev_nr)
                break;
        default:
                printf("%s: PCnet version %#x not supported\n",
-                      dev->name, chip_version);
+                      lp->name, chip_version);
                return -1;
        }
 
@@ -190,8 +192,8 @@ static int pcnet_probe(struct eth_device *dev, bd_t *bis, int dev_nr)
 
                val = pcnet_read_csr(lp, i + 12) & 0x0ffff;
                /* There may be endianness issues here. */
-               dev->enetaddr[2 * i] = val & 0x0ff;
-               dev->enetaddr[2 * i + 1] = (val >> 8) & 0x0ff;
+               lp->enetaddr[2 * i] = val & 0x0ff;
+               lp->enetaddr[2 * i + 1] = (val >> 8) & 0x0ff;
        }
 
        return 0;
@@ -204,7 +206,7 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
        int i, val;
        unsigned long addr;
 
-       PCNET_DEBUG1("%s: pcnet_init...\n", dev->name);
+       PCNET_DEBUG1("%s: %s...\n", lp->name, __func__);
 
        /* Switch pcnet to 32bit mode */
        pcnet_write_bcr(lp, 20, 2);
@@ -271,7 +273,7 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
        PCNET_DEBUG1("Init block at 0x%p: MAC", &lp->uc->init_block);
 
        for (i = 0; i < 6; i++) {
-               lp->uc->init_block.phys_addr[i] = dev->enetaddr[i];
+               lp->uc->init_block.phys_addr[i] = lp->enetaddr[i];
                PCNET_DEBUG1(" %02x", lp->uc->init_block.phys_addr[i]);
        }
 
@@ -304,7 +306,7 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
                udelay(10);
        }
        if (i <= 0) {
-               printf("%s: TIMEOUT: controller init failed\n", dev->name);
+               printf("%s: TIMEOUT: controller init failed\n", lp->name);
                pcnet_reset(lp);
                return -1;
        }
@@ -340,7 +342,7 @@ static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len)
        }
        if (i <= 0) {
                printf("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
-                      dev->name, lp->cur_tx, status);
+                      lp->name, lp->cur_tx, status);
                pkt_len = 0;
                goto failure;
        }
@@ -385,7 +387,7 @@ static int pcnet_recv (struct eth_device *dev)
                err_status = status >> 8;
 
                if (err_status != 0x03) {       /* There was an error. */
-                       printf("%s: Rx%d", dev->name, lp->cur_rx);
+                       printf("%s: Rx%d", lp->name, lp->cur_rx);
                        PCNET_DEBUG1(" (status=0x%x)", err_status);
                        if (err_status & 0x20)
                                printf(" Frame");
@@ -402,7 +404,7 @@ static int pcnet_recv (struct eth_device *dev)
                        pkt_len = (readl(&entry->msg_length) & 0xfff) - 4;
                        if (pkt_len < 60) {
                                printf("%s: Rx%d: invalid packet length %d\n",
-                                      dev->name, lp->cur_rx, pkt_len);
+                                      lp->name, lp->cur_rx, pkt_len);
                        } else {
                                buf = lp->rx_buf[lp->cur_rx];
                                invalidate_dcache_range((unsigned long)buf,
@@ -427,7 +429,7 @@ static void pcnet_halt(struct eth_device *dev)
        struct pcnet_priv *lp = dev->priv;
        int i;
 
-       PCNET_DEBUG1("%s: pcnet_halt...\n", dev->name);
+       PCNET_DEBUG1("%s: %s...\n", lp->name, __func__);
 
        /* Reset the PCnet controller */
        pcnet_reset(lp);
@@ -439,7 +441,7 @@ static void pcnet_halt(struct eth_device *dev)
                udelay(10);
        }
        if (i <= 0)
-               printf("%s: TIMEOUT: controller reset failed\n", dev->name);
+               printf("%s: TIMEOUT: controller reset failed\n", lp->name);
 }
 
 int pcnet_initialize(bd_t *bis)
@@ -451,7 +453,7 @@ int pcnet_initialize(bd_t *bis)
        int dev_nr = 0;
        u32 bar;
 
-       PCNET_DEBUG1("\npcnet_initialize...\n");
+       PCNET_DEBUG1("\n%s...\n", __func__);
 
        for (dev_nr = 0; ; dev_nr++) {
                /*
@@ -483,6 +485,8 @@ int pcnet_initialize(bd_t *bis)
                                   (unsigned long)lp + sizeof(*lp));
                dev->priv = lp;
                sprintf(dev->name, "pcnet#%d", dev_nr);
+               lp->name = dev->name;
+               lp->enetaddr = dev->enetaddr;
 
                /*
                 * Setup the PCI device.
@@ -491,14 +495,14 @@ int pcnet_initialize(bd_t *bis)
                lp->iobase = (void *)(pci_mem_to_phys(devbusfn, bar) & ~0xf);
 
                PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%p: ",
-                            dev->name, devbusfn, lp->iobase);
+                            lp->name, devbusfn, lp->iobase);
 
                command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
                pci_write_config_word(devbusfn, PCI_COMMAND, command);
                pci_read_config_word(devbusfn, PCI_COMMAND, &status);
                if ((status & command) != command) {
                        printf("%s: Couldn't enable IO access or Bus Mastering\n",
-                              dev->name);
+                              lp->name);
                        free(dev);
                        continue;
                }