[common][humanactivitymonitor][update TC steps for emulator32 and device]

Change-Id: Icdc87b83775242f0b762bd4daaff2684c186b774
Signed-off-by: chen <chen89.chen@samsung.com>

diff --git a/common/tct-humanactivitymonitor-tizen-tests/tests.full.xml b/common/tct-humanactivitymonitor-tizen-tests/tests.full.xml
index ab049b27b0e0bac1d586f148842f1d9fc778e8b5..5cfc30da715ce26238105ce4ef3a23f6b6bb2500 100755 (executable)
--- a/common/tct-humanactivitymonitor-tizen-tests/tests.full.xml
+++ b/common/tct-humanactivitymonitor-tizen-tests/tests.full.xml
@@ -5318,19 +5318,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -5403,19 +5403,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -5433,19 +5433,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -5463,19 +5463,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -5505,19 +5505,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -5535,19 +5535,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -5565,19 +5565,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -5595,19 +5595,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>

diff --git a/common/tct-humanactivitymonitor-tizen-tests/tests.xml b/common/tct-humanactivitymonitor-tizen-tests/tests.xml
index 25112dd90857069aa1f42dd772cdf730a7681961..fe68d4938929cb180fb5f2c486fe038a154f02ad 100755 (executable)
--- a/common/tct-humanactivitymonitor-tizen-tests/tests.xml
+++ b/common/tct-humanactivitymonitor-tizen-tests/tests.xml
@@ -2772,19 +2772,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -2822,19 +2822,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -2845,19 +2845,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -2868,19 +2868,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -2896,19 +2896,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -2919,19 +2919,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -2942,19 +2942,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>
@@ -2965,19 +2965,19 @@
         <description>
           <steps>
             <step order="1">
-              <step_desc>Check pedometer state in control panel.</step_desc>
-              <expected>Pedometer state is 'Stop'.</expected>
+              <step_desc>Device should be standing still (on emulator, pedometer state should be 'stop').</step_desc>
+              <expected> Pedometer state of device and emulator should be 'stop'.</expected>
             </step>
             <step order="2">
-              <step_desc>Press run button. Pretend walking with the device.</step_desc>
+              <step_desc>Press run button.</step_desc>
               <expected>Test start.</expected>
             </step>
             <step order="3">
-              <step_desc>Change pedometer state in control panel to 'Walk'.</step_desc>
-              <expected>Pedometer state is 'Walk'.</expected>
+              <step_desc>Pretend walking with the device (on emulator, pedometer state should be 'Walk').</step_desc>
+              <expected>Pedometer state of device and emulator should change to other different state than 'stop'.</expected>
             </step>
             <step order="4">
-              <step_desc>Waiting for 1 minutes.</step_desc>
+              <step_desc>Continue walking for about 1 minute until test result is shown.</step_desc>
               <expected>Pass should be shown in the page after 1 minutes.</expected>
             </step>
           </steps>