netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device

Add support for an MDIO bus multiplexer controlled by a simple memory-mapped
device, like an FPGA.  The device must be memory-mapped and contain only
8-bit registers (which keeps things simple).

Tested on a Freescale P5020DS board which uses the "PIXIS" FPGA attached
to the localbus.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt
new file mode 100644 (file)
index 0000000..8516929
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt
@@ -0,0 +1,75 @@
+Properties for an MDIO bus multiplexer controlled by a memory-mapped device
+
+This is a special case of a MDIO bus multiplexer.  A memory-mapped device,
+like an FPGA, is used to control which child bus is connected.  The mdio-mux
+node must be a child of the memory-mapped device.  The driver currently only
+supports devices with eight-bit registers.
+
+Required properties in addition to the generic multiplexer properties:
+
+- compatible : string, must contain "mdio-mux-mmioreg"
+
+- reg : integer, contains the offset of the register that controls the bus
+       multiplexer.  The size field in the 'reg' property is the size of
+       register, and must therefore be 1.
+
+- mux-mask : integer, contains an eight-bit mask that specifies which
+       bits in the register control the actual bus multiplexer.  The
+       'reg' property of each child mdio-mux node must be constrained by
+       this mask.
+
+Example:
+
+The FPGA node defines a memory-mapped FPGA with a register space of 0x30 bytes.
+For the "EMI2" MDIO bus, register 9 (BRDCFG1) controls the mux on that bus.
+A bitmask of 0x6 means that bits 1 and 2 (bit 0 is lsb) are the bits on
+BRDCFG1 that control the actual mux.
+
+       /* The FPGA node */
+       fpga: board-control@3,0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
+               reg = <3 0 0x30>;
+               ranges = <0 3 0 0x30>;
+
+               mdio-mux-emi2 {
+                       compatible = "mdio-mux-mmioreg", "mdio-mux";
+                       mdio-parent-bus = <&xmdio0>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <9 1>; // BRDCFG1
+                       mux-mask = <0x6>; // EMI2
+
+                       emi2_slot1: mdio@0 {    // Slot 1 XAUI (FM2)
+                               reg = <0>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               phy_xgmii_slot1: ethernet-phy@0 {
+                                       compatible = "ethernet-phy-ieee802.3-c45";
+                                       reg = <4>;
+                               };
+                       };
+
+                       emi2_slot2: mdio@2 {    // Slot 2 XAUI (FM1)
+                               reg = <2>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               phy_xgmii_slot2: ethernet-phy@4 {
+                                       compatible = "ethernet-phy-ieee802.3-c45";
+                                       reg = <0>;
+                               };
+                       };
+               };
+       };
+
+       /* The parent MDIO bus. */
+       xmdio0: mdio@f1000 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "fsl,fman-xmdio";
+               reg = <0xf1000 0x1000>;
+               interrupts = <100 1 0 0>;
+       };

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 3090dc6..983bbf4 100644 (file)
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -159,6 +159,19 @@ config MDIO_BUS_MUX_GPIO
          several child MDIO busses to a parent bus.  Child bus
          selection is under the control of GPIO lines.
 
+config MDIO_BUS_MUX_MMIOREG
+       tristate "Support for MMIO device-controlled MDIO bus multiplexers"
+       depends on OF_MDIO
+       select MDIO_BUS_MUX
+       help
+         This module provides a driver for MDIO bus multiplexers that
+         are controlled via a simple memory-mapped device, like an FPGA.
+         The multiplexer connects one of several child MDIO busses to a
+         parent bus.  Child bus selection is under the control of one of
+         the FPGA's registers.
+
+         Currently, only 8-bit registers are supported.
+
 endif # PHYLIB
 
 config MICREL_KS8995MA

diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 6d2dc6c..426674d 100644 (file)
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
 obj-$(CONFIG_AMD_PHY)          += amd.o
 obj-$(CONFIG_MDIO_BUS_MUX)     += mdio-mux.o
 obj-$(CONFIG_MDIO_BUS_MUX_GPIO)        += mdio-mux-gpio.o
+obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o

diff --git a/drivers/net/phy/mdio-mux-mmioreg.c b/drivers/net/phy/mdio-mux-mmioreg.c
new file mode 100644 (file)
index 0000000..098239a
--- /dev/null
+++ b/drivers/net/phy/mdio-mux-mmioreg.c
@@ -0,0 +1,170 @@
+/*
+ * Simple memory-mapped device MDIO MUX driver
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/phy.h>
+#include <linux/mdio-mux.h>
+
+struct mdio_mux_mmioreg_state {
+       void *mux_handle;
+       phys_addr_t phys;
+       uint8_t mask;
+};
+
+/*
+ * MDIO multiplexing switch function
+ *
+ * This function is called by the mdio-mux layer when it thinks the mdio bus
+ * multiplexer needs to switch.
+ *
+ * 'current_child' is the current value of the mux register (masked via
+ * s->mask).
+ *
+ * 'desired_child' is the value of the 'reg' property of the target child MDIO
+ * node.
+ *
+ * The first time this function is called, current_child == -1.
+ *
+ * If current_child == desired_child, then the mux is already set to the
+ * correct bus.
+ */
+static int mdio_mux_mmioreg_switch_fn(int current_child, int desired_child,
+                                     void *data)
+{
+       struct mdio_mux_mmioreg_state *s = data;
+
+       if (current_child ^ desired_child) {
+               void *p = ioremap(s->phys, 1);
+               uint8_t x, y;
+
+               if (!p)
+                       return -ENOMEM;
+
+               x = ioread8(p);
+               y = (x & ~s->mask) | desired_child;
+               if (x != y) {
+                       iowrite8((x & ~s->mask) | desired_child, p);
+                       pr_debug("%s: %02x -> %02x\n", __func__, x, y);
+               }
+
+               iounmap(p);
+       }
+
+       return 0;
+}
+
+static int __devinit mdio_mux_mmioreg_probe(struct platform_device *pdev)
+{
+       struct device_node *np2, *np = pdev->dev.of_node;
+       struct mdio_mux_mmioreg_state *s;
+       struct resource res;
+       const __be32 *iprop;
+       int len, ret;
+
+       dev_dbg(&pdev->dev, "probing node %s\n", np->full_name);
+
+       s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
+       if (!s)
+               return -ENOMEM;
+
+       ret = of_address_to_resource(np, 0, &res);
+       if (ret) {
+               dev_err(&pdev->dev, "could not obtain memory map for node %s\n",
+                       np->full_name);
+               return ret;
+       }
+       s->phys = res.start;
+
+       if (resource_size(&res) != sizeof(uint8_t)) {
+               dev_err(&pdev->dev, "only 8-bit registers are supported\n");
+               return -EINVAL;
+       }
+
+       iprop = of_get_property(np, "mux-mask", &len);
+       if (!iprop || len != sizeof(uint32_t)) {
+               dev_err(&pdev->dev, "missing or invalid mux-mask property\n");
+               return -ENODEV;
+       }
+       if (be32_to_cpup(iprop) > 255) {
+               dev_err(&pdev->dev, "only 8-bit registers are supported\n");
+               return -EINVAL;
+       }
+       s->mask = be32_to_cpup(iprop);
+
+       /*
+        * Verify that the 'reg' property of each child MDIO bus does not
+        * set any bits outside of the 'mask'.
+        */
+       for_each_available_child_of_node(np, np2) {
+               iprop = of_get_property(np2, "reg", &len);
+               if (!iprop || len != sizeof(uint32_t)) {
+                       dev_err(&pdev->dev, "mdio-mux child node %s is "
+                               "missing a 'reg' property\n", np2->full_name);
+                       return -ENODEV;
+               }
+               if (be32_to_cpup(iprop) & ~s->mask) {
+                       dev_err(&pdev->dev, "mdio-mux child node %s has "
+                               "a 'reg' value with unmasked bits\n",
+                               np2->full_name);
+                       return -ENODEV;
+               }
+       }
+
+       ret = mdio_mux_init(&pdev->dev, mdio_mux_mmioreg_switch_fn,
+                           &s->mux_handle, s);
+       if (ret) {
+               dev_err(&pdev->dev, "failed to register mdio-mux bus %s\n",
+                       np->full_name);
+               return ret;
+       }
+
+       pdev->dev.platform_data = s;
+
+       return 0;
+}
+
+static int __devexit mdio_mux_mmioreg_remove(struct platform_device *pdev)
+{
+       struct mdio_mux_mmioreg_state *s = dev_get_platdata(&pdev->dev);
+
+       mdio_mux_uninit(s->mux_handle);
+
+       return 0;
+}
+
+static struct of_device_id mdio_mux_mmioreg_match[] = {
+       {
+               .compatible = "mdio-mux-mmioreg",
+       },
+       {},
+};
+MODULE_DEVICE_TABLE(of, mdio_mux_mmioreg_match);
+
+static struct platform_driver mdio_mux_mmioreg_driver = {
+       .driver = {
+               .name           = "mdio-mux-mmioreg",
+               .owner          = THIS_MODULE,
+               .of_match_table = mdio_mux_mmioreg_match,
+       },
+       .probe          = mdio_mux_mmioreg_probe,
+       .remove         = __devexit_p(mdio_mux_mmioreg_remove),
+};
+
+module_platform_driver(mdio_mux_mmioreg_driver);
+
+MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
+MODULE_DESCRIPTION("Memory-mapped device MDIO MUX driver");
+MODULE_LICENSE("GPL v2");