arm64: dts: ls1028a-rdb: sort nodes alphabetically by label

In preparation for this board's device tree synchronization with U-Boot,
we must find a common node ordering pattern. Alphabetical sounds about
right.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 7719f44..a6f41aa 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -102,6 +102,48 @@
        };
 };
 
+&duart0 {
+       status = "okay";
+};
+
+&duart1 {
+       status = "okay";
+};
+
+&enetc_mdio_pf3 {
+       sgmii_phy0: ethernet-phy@2 {
+               reg = <0x2>;
+       };
+
+       /* VSC8514 QSGMII quad PHY */
+       qsgmii_phy0: ethernet-phy@10 {
+               reg = <0x10>;
+       };
+
+       qsgmii_phy1: ethernet-phy@11 {
+               reg = <0x11>;
+       };
+
+       qsgmii_phy2: ethernet-phy@12 {
+               reg = <0x12>;
+       };
+
+       qsgmii_phy3: ethernet-phy@13 {
+               reg = <0x13>;
+       };
+};
+
+&enetc_port0 {
+       phy-handle = <&sgmii_phy0>;
+       phy-mode = "sgmii";
+       managed = "in-band-status";
+       status = "okay";
+};
+
+&enetc_port2 {
+       status = "okay";
+};
+
 &esdhc {
        sd-uhs-sdr104;
        sd-uhs-sdr50;
@@ -188,48 +230,6 @@
        };
 };
 
-&duart0 {
-       status = "okay";
-};
-
-&duart1 {
-       status = "okay";
-};
-
-&enetc_mdio_pf3 {
-       sgmii_phy0: ethernet-phy@2 {
-               reg = <0x2>;
-       };
-
-       /* VSC8514 QSGMII quad PHY */
-       qsgmii_phy0: ethernet-phy@10 {
-               reg = <0x10>;
-       };
-
-       qsgmii_phy1: ethernet-phy@11 {
-               reg = <0x11>;
-       };
-
-       qsgmii_phy2: ethernet-phy@12 {
-               reg = <0x12>;
-       };
-
-       qsgmii_phy3: ethernet-phy@13 {
-               reg = <0x13>;
-       };
-};
-
-&enetc_port0 {
-       phy-handle = <&sgmii_phy0>;
-       phy-mode = "sgmii";
-       managed = "in-band-status";
-       status = "okay";
-};
-
-&enetc_port2 {
-       status = "okay";
-};
-
 &mscc_felix {
        status = "okay";
 };