* @dev: Pointer to device structure
* @phy_node: Pointer to device node structure
* @mii_bus: Pointer to MII bus structure
+ * @mii_clk_div: MII bus clock divider value
* @regs_start: Resource start for axienet device addresses
* @regs: Base address for the axienet_local device address space
* @dma_regs: Base address for the axidma device address space
/* MDIO bus data */
struct mii_bus *mii_bus; /* MII bus reference */
+ u8 mii_clk_div; /* MII bus clock divider value */
/* IO registers, dma functions and IRQs */
resource_size_t regs_start;
1, 20000);
}
+/* Enable the MDIO MDC. Called prior to a read/write operation */
+static void axienet_mdio_mdc_enable(struct axienet_local *lp)
+{
+ axienet_iow(lp, XAE_MDIO_MC_OFFSET,
+ ((u32)lp->mii_clk_div | XAE_MDIO_MC_MDIOEN_MASK));
+}
+
+/* Disable the MDIO MDC. Called after a read/write operation*/
+static void axienet_mdio_mdc_disable(struct axienet_local *lp)
+{
+ u32 mc_reg;
+
+ mc_reg = axienet_ior(lp, XAE_MDIO_MC_OFFSET);
+ axienet_iow(lp, XAE_MDIO_MC_OFFSET,
+ (mc_reg & ~XAE_MDIO_MC_MDIOEN_MASK));
+}
+
/**
* axienet_mdio_read - MDIO interface read function
* @bus: Pointer to mii bus structure
**/
int axienet_mdio_enable(struct axienet_local *lp)
{
- u32 clk_div, host_clock;
+ u32 host_clock;
+
+ lp->mii_clk_div = 0;
if (lp->clk) {
host_clock = clk_get_rate(lp->clk);
* "clock-frequency" from the CPU
*/
- clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1;
+ lp->mii_clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1;
/* If there is any remainder from the division of
* fHOST / (MAX_MDIO_FREQ * 2), then we need to add
* 1 to the clock divisor or we will surely be above 2.5 MHz
*/
if (host_clock % (MAX_MDIO_FREQ * 2))
- clk_div++;
+ lp->mii_clk_div++;
netdev_dbg(lp->ndev,
"Setting MDIO clock divisor to %u/%u Hz host clock.\n",
- clk_div, host_clock);
+ lp->mii_clk_div, host_clock);
- axienet_iow(lp, XAE_MDIO_MC_OFFSET, clk_div | XAE_MDIO_MC_MDIOEN_MASK);
+ axienet_iow(lp, XAE_MDIO_MC_OFFSET, lp->mii_clk_div | XAE_MDIO_MC_MDIOEN_MASK);
return axienet_mdio_wait_until_ready(lp);
}