MPC85xx: Beautify boot output of L2 cache configuration

The boot output is now aligned poperly with other boot output
lines, e.g.:

  FLASH: 128 MB
  L2:    512 KB enabled

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index d585e87..c64bf10 100644 (file)
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -167,7 +167,7 @@ int checkcpu (void)
        }
 
 #ifdef CONFIG_CPM2
-       printf("CPM:  %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
+       printf("CPM:   %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
 #endif
 
        puts("L1:    D-cache 32 kB enabled\n       I-cache 32 kB enabled\n");

diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index e3240b5..0fb36c4 100644 (file)
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -265,6 +265,8 @@ int cpu_init_r(void)
 #endif
 #endif
 
+       puts ("L2:    ");
+
 #if defined(CONFIG_L2_CACHE)
        volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
        volatile uint cache_ctl;
@@ -281,17 +283,17 @@ int cpu_init_r(void)
        case 0x20000000:
                if (ver == SVR_8548 || ver == SVR_8548_E ||
                    ver == SVR_8544 || ver == SVR_8568_E) {
-                       printf ("L2 cache 512KB:");
+                       puts ("512 KB ");
                        /* set L2E=1, L2I=1, & L2SRAM=0 */
                        cache_ctl = 0xc0000000;
                } else {
-                       printf ("L2 cache 256KB:");
+                       puts("256 KB ");
                        /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
                        cache_ctl = 0xc8000000;
                }
                break;
        case 0x10000000:
-               printf ("L2 cache 256KB:");
+               puts("256 KB ");
                if (ver == SVR_8544 || ver == SVR_8544_E) {
                        cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
                }
@@ -299,18 +301,18 @@ int cpu_init_r(void)
        case 0x30000000:
        case 0x00000000:
        default:
-               printf ("L2 cache unknown size (0x%08x)\n", cache_ctl);
+               printf(" unknown size (0x%08x)\n", cache_ctl);
                return -1;
        }
 
        if (l2cache->l2ctl & 0x80000000) {
-               printf(" already enabled.");
+               puts("already enabled");
                l2srbar = l2cache->l2srbar0;
 #ifdef CFG_INIT_L2_ADDR
                if (l2cache->l2ctl & 0x00010000 && l2srbar >= CFG_FLASH_BASE) {
                        l2srbar = CFG_INIT_L2_ADDR;
                        l2cache->l2srbar0 = l2srbar;
-                       printf("  Moving to 0x%08x", CFG_INIT_L2_ADDR);
+                       printf("moving to 0x%08x", CFG_INIT_L2_ADDR);
                }
 #endif /* CFG_INIT_L2_ADDR */
                puts("\n");
@@ -318,10 +320,10 @@ int cpu_init_r(void)
                asm("msync;isync");
                l2cache->l2ctl = cache_ctl; /* invalidate & enable */
                asm("msync;isync");
-               printf(" enabled\n");
+               puts("enabled\n");
        }
 #else
-       printf("L2 cache: disabled\n");
+       puts("disabled\n");
 #endif
 #ifdef CONFIG_QE
        uint qe_base = CFG_IMMR + 0x00080000; /* QE immr base */