[ Upstream commit
7173be21ae29ef50ada42fd4464056a9d3f55bb3 ]
While converting to FIELD_PREP() and FIELD_GET(), it was noticed that
some of the RSS defines had *included* the shift in their definitions.
This is completely outside of normal, such that a developer could easily
make a mistake and shift at the usage site (like when using
FIELD_PREP()).
Rename the defines and set them to the "pre-shifted values" so they
match the template the driver normally uses for masks and the member
bits of the mask, which also allows the driver to use FIELD_PREP
correctly with these values. Use GENMASK() for this changed MASK value.
Do the same for the VLAN EMODE defines as well.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
#define ICE_AQ_VSI_INNER_VLAN_INSERT_PVID BIT(2)
#define ICE_AQ_VSI_INNER_VLAN_EMODE_S 3
#define ICE_AQ_VSI_INNER_VLAN_EMODE_M (0x3 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
-#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH (0x0 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
-#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR_UP (0x1 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
-#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR (0x2 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
-#define ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING (0x3 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH 0x0U
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR_UP 0x1U
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR 0x2U
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING 0x3U
u8 inner_vlan_reserved2[3];
/* ingress egress up sections */
__le32 ingress_table; /* bitmap, 3 bits per up */
#define ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_S 2
#define ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_M (0xF << ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_S)
#define ICE_AQ_VSI_Q_OPT_RSS_HASH_S 6
-#define ICE_AQ_VSI_Q_OPT_RSS_HASH_M (0x3 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_HASH_M GENMASK(7, 6)
#define ICE_AQ_VSI_Q_OPT_RSS_HASH_TPLZ 0x0U
#define ICE_AQ_VSI_Q_OPT_RSS_HASH_SYM_TPLZ 0x1U
#define ICE_AQ_VSI_Q_OPT_RSS_HASH_XOR 0x2U
*/
if (ice_is_dvm_ena(hw)) {
ctxt->info.inner_vlan_flags |=
- ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
+ FIELD_PREP(ICE_AQ_VSI_INNER_VLAN_EMODE_M,
+ ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING);
ctxt->info.outer_vlan_flags =
(ICE_AQ_VSI_OUTER_VLAN_TX_MODE_ALL <<
ICE_AQ_VSI_OUTER_VLAN_TX_MODE_S) &
{
struct ice_hw *hw = &vsi->back->hw;
struct ice_vsi_ctx *ctxt;
+ u8 *ivf;
int err;
/* do not allow modifying VLAN stripping when a port VLAN is configured
if (!ctxt)
return -ENOMEM;
+ ivf = &ctxt->info.inner_vlan_flags;
+
/* Here we are configuring what the VSI should do with the VLAN tag in
* the Rx packet. We can either leave the tag in the packet or put it in
* the Rx descriptor.
*/
- if (ena)
+ if (ena) {
/* Strip VLAN tag from Rx packet and put it in the desc */
- ctxt->info.inner_vlan_flags = ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH;
- else
+ *ivf = FIELD_PREP(ICE_AQ_VSI_INNER_VLAN_EMODE_M,
+ ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH);
+ } else {
/* Disable stripping. Leave tag in packet */
- ctxt->info.inner_vlan_flags = ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
+ *ivf = FIELD_PREP(ICE_AQ_VSI_INNER_VLAN_EMODE_M,
+ ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING);
+ }
/* Allow all packets untagged/tagged */
- ctxt->info.inner_vlan_flags |= ICE_AQ_VSI_INNER_VLAN_TX_MODE_ALL;
+ *ivf |= ICE_AQ_VSI_INNER_VLAN_TX_MODE_ALL;
ctxt->info.valid_sections = cpu_to_le16(ICE_AQ_VSI_PROP_VLAN_VALID);