watchdog: rzg2l_wdt: Issue a reset before we put the PM clocks

On RZ/Five SoC it was observed that setting timeout (to say 1 sec) wouldn't
reset the system.

The procedure described in the HW manual (Procedure for Activating Modules)
for activating the target module states we need to start supply of the
clock module before applying the reset signal. This patch makes sure we
follow the same procedure to clear the registers of the WDT module, fixing
the issues seen on RZ/Five SoC.

While at it re-used rzg2l_wdt_stop() in rzg2l_wdt_set_timeout() as it has
the same function calls.

Fixes: 4055ee81009e ("watchdog: rzg2l_wdt: Add set_timeout callback")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20221117114907.138583-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

diff --git a/drivers/watchdog/rzg2l_wdt.c b/drivers/watchdog/rzg2l_wdt.c
index 974a4194a8fd67b940ef47263e4cb190b5a0e863..ceca42db083747d76c52e2d67c58647809775fc5 100644 (file)
--- a/drivers/watchdog/rzg2l_wdt.c
+++ b/drivers/watchdog/rzg2l_wdt.c
@@ -115,25 +115,23 @@ static int rzg2l_wdt_stop(struct watchdog_device *wdev)
 {
        struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
 
-       pm_runtime_put(wdev->parent);
        reset_control_reset(priv->rstc);
+       pm_runtime_put(wdev->parent);
 
        return 0;
 }
 
 static int rzg2l_wdt_set_timeout(struct watchdog_device *wdev, unsigned int timeout)
 {
-       struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
-
        wdev->timeout = timeout;
 
        /*
         * If the watchdog is active, reset the module for updating the WDTSET
-        * register so that it is updated with new timeout values.
+        * register by calling rzg2l_wdt_stop() (which internally calls reset_control_reset()
+        * to reset the module) so that it is updated with new timeout values.
         */
        if (watchdog_active(wdev)) {
-               pm_runtime_put(wdev->parent);
-               reset_control_reset(priv->rstc);
+               rzg2l_wdt_stop(wdev);
                rzg2l_wdt_start(wdev);
        }