/* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_rst_pins>;
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
#phy-cells = <0>;
};
&davinci_emac {
- status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet_pins>;
+ status = "okay";
};
&davinci_mdio {
};
&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
/* User DIP swithes [1:8] / User LEDS [1:2] */
tca6416: gpio@21 {
};
&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
};
};
&usbhshost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_pins>;
port1-mode = "ehci-phy";
};
};
&omap3_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb1_rst_pins>;
+
+ ethernet_pins: pinmux_ethernet_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+ OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+ OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+ OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+ OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+ OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+ OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+ OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+ OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+ OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
};
&omap3_pmx_core2 {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb1_pins>;
hsusb1_pins: pinmux_hsusb1_pins {
pinctrl-single,pins = <
};
&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
s35390a: s35390a@30 {
&omap3_pmx_core {
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */