moved to ../include/curl/

diff --git a/lib/multi.h b/lib/multi.h
deleted file mode 100644 (file)
index 42fa1dd..0000000
--- a/lib/multi.h
+++ /dev/null
@@ -1,189 +0,0 @@
-#ifndef __CURL_MULTI_H
-#define __CURL_MULTI_H
-/*****************************************************************************
- *                                  _   _ ____  _     
- *  Project                     ___| | | |  _ \| |    
- *                             / __| | | | |_) | |    
- *                            | (__| |_| |  _ <| |___ 
- *                             \___|\___/|_| \_\_____|
- *
- * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
- *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
- * You may opt to use, copy, modify, merge, publish, distribute and/or sell
- * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- * $Id$
- *****************************************************************************/
-/*
-  This is meant to be the "external" header file. Don't give away any
-  internals here!
-
-  This document presents a mixture of ideas from at least:
-  - Daniel Stenberg
-  - Steve Dekorte
-  - Sterling Hughes
-  - Ben Greear
-
-  -------------------------------------------
-  GOALS
-
-  o Enable a "pull" interface. The application that uses libcurl decides where
-    and when to ask libcurl to get/send data.
-
-  o Enable multiple simultaneous transfers in the same thread without making it
-    complicated for the application.
-
-  o Enable the application to select() on its own file descriptors and curl's
-    file descriptors simultaneous easily.
-  
-  Example sources using this interface is here: ../multi/
-
-*/
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#if defined(WIN32) && !defined(__GNUC__) || defined(__MINGW32__)
-#include <winsock.h>
-#endif
-
-#include <curl/curl.h>
-
-typedef void CURLM;
-
-typedef enum {
-  CURLM_CALL_MULTI_PERFORM=-1, /* please call curl_multi_perform() soon */
-  CURLM_OK,
-  CURLM_BAD_HANDLE,      /* the passed-in handle is not a valid CURLM handle */
-  CURLM_BAD_EASY_HANDLE, /* an easy handle was not good/valid */
-  CURLM_OUT_OF_MEMORY,   /* if you ever get this, you're in deep sh*t */
-  CURLM_INTERNAL_ERROR,  /* this is a libcurl bug */
-  CURLM_LAST
-} CURLMcode;
-
-typedef enum {
-  CURLMSG_NONE, /* first, not used */
-  CURLMSG_DONE, /* This easy handle has completed. 'whatever' points to
-                   the CURLcode of the transfer */
-  CURLMSG_LAST /* last, not used */
-} CURLMSG;
-
-struct CURLMsg {
-  CURLMSG msg;       /* what this message means */
-  CURL *easy_handle; /* the handle it concerns */
-  union {
-    void *whatever;    /* message-specific data */
-    CURLcode result;   /* return code for transfer */
-  } data;
-};
-typedef struct CURLMsg CURLMsg;
-
-/*
- * Name:    curl_multi_init()
- *
- * Desc:    inititalize multi-style curl usage
- * Returns: a new CURLM handle to use in all 'curl_multi' functions.
- */
-CURLM *curl_multi_init(void);
-
-/*
- * Name:    curl_multi_add_handle()
- *
- * Desc:    add a standard curl handle to the multi stack
- * Returns: CURLMcode type, general multi error code.
- */
-CURLMcode curl_multi_add_handle(CURLM *multi_handle,
-                                CURL *curl_handle);
-
- /*
-  * Name:    curl_multi_remove_handle()
-  *
-  * Desc:    removes a curl handle from the multi stack again
-  * Returns: CURLMcode type, general multi error code.
-  */
-CURLMcode curl_multi_remove_handle(CURLM *multi_handle,
-                                   CURL *curl_handle);
-
- /*
-  * Name:    curl_multi_fdset()
-  *
-  * Desc:    Ask curl for its fd_set sets. The app can use these to select() or
-  *          poll() on. We want curl_multi_perform() called as soon as one of
-  *          them are ready.
-  * Returns: CURLMcode type, general multi error code.
-  */
-CURLMcode curl_multi_fdset(CURLM *multi_handle,
-                           fd_set *read_fd_set,
-                           fd_set *write_fd_set,
-                           fd_set *exc_fd_set,
-                           int *max_fd);
-
- /*
-  * Name:    curl_multi_perform()
-  *
-  * Desc:    When the app thinks there's data available for curl it calls this
-  *          function to read/write whatever there is right now. This returns
-  *          as soon as the reads and writes are done. This function does not
-  *          require that there actually is data available for reading or that
-  *          data can be written, it can be called just in case. It returns
-  *          the number of handles that still transfer data in the second
-  *          argument's integer-pointer.
-  *
-  * Returns: CURLMcode type, general multi error code. *NOTE* that this only
-  *          returns errors etc regarding the whole multi stack. There might
-  *          still have occurred problems on invidual transfers even when this
-  *          returns OK.
-  */
-CURLMcode curl_multi_perform(CURLM *multi_handle,
-                             int *running_handles);
-
- /*
-  * Name:    curl_multi_cleanup()
-  *
-  * Desc:    Cleans up and removes a whole multi stack. It does not free or
-  *          touch any individual easy handles in any way. We need to define
-  *          in what state those handles will be if this function is called
-  *          in the middle of a transfer.
-  * Returns: CURLMcode type, general multi error code.
-  */
-CURLMcode curl_multi_cleanup(CURLM *multi_handle);
-
-/*
- * Name:    curl_multi_info_read()
- *
- * Desc:    Ask the multi handle if there's any messages/informationals from
- *          the individual transfers. Messages include informationals such as
- *          error code from the transfer or just the fact that a transfer is
- *          completed. More details on these should be written down as well.
- *
- *          Repeated calls to this function will return a new struct each
- *          time, until a special "end of msgs" struct is returned as a signal
- *          that there is no more to get at this point.
- *
- *          The data the returned pointer points to will not survive calling
- *          curl_multi_cleanup().
- *
- *          The 'CURLMsg' struct is meant to be very simple and only contain
- *          very basic informations. If more involved information is wanted,
- *          we will provide the particular "transfer handle" in that struct
- *          and that should/could/would be used in subsequent
- *          curl_easy_getinfo() calls (or similar). The point being that we
- *          must never expose complex structs to applications, as then we'll
- *          undoubtably get backwards compatibility problems in the future.
- *
- * Returns: A pointer to a filled-in struct, or NULL if it failed or ran out
- *          of structs. It also writes the number of messages left in the
- *          queue (after this read) in the integer the second argument points
- *          to.
- */
-CURLMsg *curl_multi_info_read(CURLM *multi_handle,
-                              int *msgs_in_queue);
-
-#endif