Fix typo in various Kconfig file

Correct spelling typo in various Kconfig file.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 8a9c767..51b3274 100644 (file)
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -7,7 +7,7 @@ choice
        help
          The Freescale (was Motorola) M68K family of processors implements
          the full 68000 processor instruction set.
-         The Freescale ColdFire family of processors is a modern derivitive
+         The Freescale ColdFire family of processors is a modern derivative
          of the 68000 processor family. They are mainly targeted at embedded
          applications, and are all System-On-Chip (SOC) devices, as opposed
          to stand alone CPUs. They implement a subset of the original 68000

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ce30e2f..923a6c3 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1001,12 +1001,12 @@ config HOLES_IN_ZONE
        bool
 
 #
-# Endianess selection.  Sufficiently obscure so many users don't know what to
+# Endianness selection.  Sufficiently obscure so many users don't know what to
 # answer,so we try hard to limit the available choices.  Also the use of a
 # choice statement should be more obvious to the user.
 #
 choice
-       prompt "Endianess selection"
+       prompt "Endianness selection"
        help
          Some MIPS machines can be configured for either little or big endian
          byte order. These modes require different kernels and a different

diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 83ed00a..5a43aa0 100644 (file)
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -57,7 +57,7 @@ config CMDLINE
          options.
 
 config CMDLINE_OVERRIDE
-       bool "Built-in command line overrides firware arguments"
+       bool "Built-in command line overrides firmware arguments"
        default n
        depends on CMDLINE_BOOL
        help

diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index a478719..66dff20 100644 (file)
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -141,7 +141,7 @@ config DEBUG_STACKOVERFLOW
        bool "Check for kernel stack overflow"
        default y
        help
-         Make extra checks for space avaliable on stack in some
+         Make extra checks for space available on stack in some
           critical functions. This will cause kernel to run a bit slower,
          but will catch most of kernel stack overruns and exit gracefuly.
 

diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 425db18..9c80fc0 100644 (file)
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -258,7 +258,7 @@ config PPC_ICSWX_PID
        default y
        ---help---
          The PID register in server is used explicitly for ICSWX.  In
-         embedded systems PID managment is done by the system.
+         embedded systems PID management is done by the system.
 
 config PPC_ICSWX_USE_SIGILL
        bool "Should a bad CT cause a SIGILL?"
@@ -266,7 +266,7 @@ config PPC_ICSWX_USE_SIGILL
        default n
        ---help---
          Should a bad CT used for "non-record form ICSWX" cause an
-         illegal intruction signal or should it be silent as
+         illegal instruction signal or should it be silent as
          architected.
 
          If in doubt, say N here.

diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index aadbe4f..10ad207 100644 (file)
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -67,7 +67,7 @@ config IO_EVENT_IRQ
 
          This option will only enable the IO event platform code. You
          will still need to enable or compile the actual drivers
-         that use this infrastruture to handle IO event interrupts.
+         that use this infrastructure to handle IO event interrupts.
 
          Say Y if you are unsure.
 

diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index ddf096c..770ff2d 100644 (file)
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -1,7 +1,7 @@
 menu "Processor features"
 
 choice
-       prompt "Endianess selection" 
+       prompt "Endianness selection" 
        default CPU_LITTLE_ENDIAN
        help
          Some SuperH machines can be configured for either little or big

diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 464fa21..f6b0a6e 100644 (file)
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -16,7 +16,7 @@ menuconfig PM_DEVFREQ
          is attached to a single device and returns a "representative"
          clock frequency of the device, which is also attached
          to a device by 1-to-1. The device registering devfreq takes the
-         responsiblity to "interpret" the representative frequency and
+         responsibility to "interpret" the representative frequency and
          to set its every clock accordingly with the "target" callback
          given to devfreq.
 

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index a3d0332..478eb4a 100644 (file)
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -448,7 +448,7 @@ config HID_PICOLCD_FB
        select FB_SYS_FOPS
        ---help---
          Provide access to PicoLCD's 256x64 monochrome display via a
-         frambuffer device.
+         framebuffer device.
 
 config HID_PICOLCD_BACKLIGHT
        bool "Backlight control" if EXPERT

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 8deedc1..e466ecb 100644 (file)
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -318,7 +318,7 @@ config SENSORS_EXYNOS4_TMU
        tristate "Temperature sensor on Samsung EXYNOS4"
        depends on ARCH_EXYNOS4
        help
-         If you say yes here you get support for TMU (Thermal Managment
+         If you say yes here you get support for TMU (Thermal Management
          Unit) on SAMSUNG EXYNOS4 series of SoC.
 
          This driver can also be built as a module. If so, the module

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d2c5095..94468a6 100644 (file)
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -351,7 +351,7 @@ config I2C_DAVINCI
          For details please see http://www.ti.com/davinci
 
 config I2C_DESIGNWARE_PLATFORM
-       tristate "Synopsys DesignWare Platfrom"
+       tristate "Synopsys DesignWare Platform"
        depends on HAVE_CLK
        help
          If you say yes to this option, support will be included for the

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 29f463c..639e1fc 100644 (file)
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -407,7 +407,7 @@ config MFD_MAX8925
        select MFD_CORE
        help
          Say yes here to support for Maxim Semiconductor MAX8925. This is
-         a Power Management IC. This driver provies common support for
+         a Power Management IC. This driver provides common support for
          accessing the device, additional drivers must be enabled in order
          to use the functionality of the device.
 
@@ -430,7 +430,7 @@ config MFD_MAX8998
        help
          Say yes here to support for Maxim Semiconductor MAX8998 and
          National Semiconductor LP3974. This is a Power Management IC.
-         This driver provies common support for accessing the device,
+         This driver provides common support for accessing the device,
          additional drivers must be enabled in order to use the functionality
          of the device.
 
@@ -441,7 +441,7 @@ config MFD_S5M_CORE
        select REGMAP_I2C
        help
         Support for the Samsung Electronics S5M MFD series.
-        This driver provies common support for accessing the device,
+        This driver provides common support for accessing the device,
         additional drivers must be enabled in order to use the functionality
         of the device
 

diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index cd9bc3b..b4b918a 100644 (file)
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -70,7 +70,7 @@ config DP83640_PHY
          using the SO_TIMESTAMPING API.
 
          In order for this to work, your MAC driver must also
-         implement the skb_tx_timetamp() function.
+         implement the skb_tx_timestamp() function.
 
 config PTP_1588_CLOCK_PCH
        tristate "Intel PCH EG20T as PTP clock"

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 3709624..eeea76f 100644 (file)
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -937,7 +937,7 @@ config BCM47XX_WDT
        tristate "Broadcom BCM47xx Watchdog Timer"
        depends on BCM47XX
        help
-         Hardware driver for the Broadcom BCM47xx Watchog Timer.
+         Hardware driver for the Broadcom BCM47xx Watchdog Timer.
 
 config RC32434_WDT
        tristate "IDT RC32434 SoC Watchdog Timer"

diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 9424313..73f1c99 100644 (file)
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -71,7 +71,7 @@ config XEN_DEV_EVTCHN
        tristate "Xen /dev/xen/evtchn device"
        default y
        help
-         The evtchn driver allows a userspace process to triger event
+         The evtchn driver allows a userspace process to trigger event
          channels and to receive notification of an event channel
          firing.
          If in doubt, say yes.