}
/**
+ * i40e_aq_config_vsi_bw_limit - Configure VSI BW Limit
+ * @hw: pointer to the hw struct
+ * @seid: VSI seid
+ * @credit: BW limit credits (0 = disabled)
+ * @max_credit: Max BW limit credits
+ * @cmd_details: pointer to command details structure or NULL
+ **/
+i40e_status i40e_aq_config_vsi_bw_limit(struct i40e_hw *hw,
+ u16 seid, u16 credit, u8 max_credit,
+ struct i40e_asq_cmd_details *cmd_details)
+{
+ struct i40e_aq_desc desc;
+ struct i40e_aqc_configure_vsi_bw_limit *cmd =
+ (struct i40e_aqc_configure_vsi_bw_limit *)&desc.params.raw;
+ i40e_status status;
+
+ i40e_fill_default_direct_cmd_desc(&desc,
+ i40e_aqc_opc_configure_vsi_bw_limit);
+
+ cmd->vsi_seid = cpu_to_le16(seid);
+ cmd->credit = cpu_to_le16(credit);
+ cmd->max_credit = max_credit;
+
+ status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
+
+ return status;
+}
+
+/**
* i40e_aq_config_vsi_tc_bw - Config VSI BW Allocation per TC
* @hw: pointer to the hw struct
* @seid: VSI seid
i40e_status i40e_aq_mac_address_write(struct i40e_hw *hw,
u16 flags, u8 *mac_addr,
struct i40e_asq_cmd_details *cmd_details);
+i40e_status i40e_aq_config_vsi_bw_limit(struct i40e_hw *hw,
+ u16 seid, u16 credit, u8 max_credit,
+ struct i40e_asq_cmd_details *cmd_details);
i40e_status i40e_aq_dcb_updated(struct i40e_hw *hw,
struct i40e_asq_cmd_details *cmd_details);
i40e_status i40e_aq_set_hmc_resource_profile(struct i40e_hw *hw,
if (ret)
dev_err(&pf->pdev->dev, "Unable to program ucast filters\n");
+ /* Set VF bandwidth if specified */
+ if (vf->tx_rate) {
+ ret = i40e_aq_config_vsi_bw_limit(&pf->hw, vsi->seid,
+ vf->tx_rate / 50, 0, NULL);
+ if (ret)
+ dev_err(&pf->pdev->dev, "Unable to set tx rate, VF %d, error code %d.\n",
+ vf->vf_id, ret);
+ }
+
error_alloc_vsi_res:
return ret;
}
**/
int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int tx_rate)
{
- return -EOPNOTSUPP;
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_pf *pf = np->vsi->back;
+ struct i40e_vsi *vsi;
+ struct i40e_vf *vf;
+ int speed = 0;
+ int ret = 0;
+
+ /* validate the request */
+ if (vf_id >= pf->num_alloc_vfs) {
+ dev_err(&pf->pdev->dev, "Invalid VF Identifier %d.\n", vf_id);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ vf = &(pf->vf[vf_id]);
+ vsi = pf->vsi[vf->lan_vsi_index];
+ if (!test_bit(I40E_VF_STAT_INIT, &vf->vf_states)) {
+ dev_err(&pf->pdev->dev, "Uninitialized VF %d.\n", vf_id);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ switch (pf->hw.phy.link_info.link_speed) {
+ case I40E_LINK_SPEED_40GB:
+ speed = 40000;
+ break;
+ case I40E_LINK_SPEED_10GB:
+ speed = 10000;
+ break;
+ case I40E_LINK_SPEED_1GB:
+ speed = 1000;
+ break;
+ default:
+ break;
+ }
+
+ if (tx_rate > speed) {
+ dev_err(&pf->pdev->dev, "Invalid tx rate %d specified for vf %d.",
+ tx_rate, vf->vf_id);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ /* Tx rate credits are in values of 50Mbps, 0 is disabled*/
+ ret = i40e_aq_config_vsi_bw_limit(&pf->hw, vsi->seid, tx_rate / 50, 0,
+ NULL);
+ if (ret) {
+ dev_err(&pf->pdev->dev, "Unable to set tx rate, error code %d.\n",
+ ret);
+ ret = -EIO;
+ goto error;
+ }
+ vf->tx_rate = tx_rate;
+error:
+ return ret;
}
/**
memcpy(&ivi->mac, vf->default_lan_addr.addr, ETH_ALEN);
- ivi->tx_rate = 0;
+ ivi->tx_rate = vf->tx_rate;
ivi->vlan = le16_to_cpu(vsi->info.pvid) & I40E_VLAN_MASK;
ivi->qos = (le16_to_cpu(vsi->info.pvid) & I40E_PRIORITY_MASK) >>
I40E_VLAN_PRIORITY_SHIFT;