ARM: dts: lan966x: add MIIM nodes

Add the MDIO controller nodes. The integrated PHYs are connected to the
second controller. This controller also takes care of the resets of the
integrated PHYs, thus it has two memory regions. The first controller
is routed to the external MDIO/MDC pins.

By default, they are disabled.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-10-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>

diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 140bdeb..786655b 100644 (file)
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -418,6 +418,37 @@
                        #interrupt-cells = <2>;
                };
 
+               mdio0: mdio@e2004118 {
+                       compatible = "microchip,lan966x-miim";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0xe2004118 0x24>;
+                       clocks = <&sys_clk>;
+                       status = "disabled";
+               };
+
+               mdio1: mdio@e200413c {
+                       compatible = "microchip,lan966x-miim";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0xe200413c 0x24>,
+                             <0xe2010020 0x4>;
+                       clocks = <&sys_clk>;
+                       status = "disabled";
+
+                       phy0: ethernet-phy@1 {
+                               reg = <1>;
+                               interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+
+                       phy1: ethernet-phy@2 {
+                               reg = <2>;
+                               interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+               };
+
                sgpio: gpio@e2004190 {
                        compatible = "microchip,sparx5-sgpio";
                        reg = <0xe2004190 0x118>;