b43: LP-PHY: use new pointers path to access ssb_device

LP-PHY code is SSB specific, add check for bus type.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 2606c25..daec1d9 100644 (file)
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -214,7 +214,7 @@ static void lpphy_table_init(struct b43_wldev *dev)
 
 static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
 {
-       struct ssb_bus *bus = dev->sdev->bus;
+       struct ssb_bus *bus = dev->dev->sdev->bus;
        struct ssb_sprom *sprom = dev->dev->bus_sprom;
        struct b43_phy_lp *lpphy = dev->phy.lp;
        u16 tmp, tmp2;
@@ -519,7 +519,7 @@ struct b2062_freqdata {
 static void lpphy_2062_init(struct b43_wldev *dev)
 {
        struct b43_phy_lp *lpphy = dev->phy.lp;
-       struct ssb_bus *bus = dev->sdev->bus;
+       struct ssb_bus *bus = dev->dev->sdev->bus;
        u32 crystalfreq, tmp, ref;
        unsigned int i;
        const struct b2062_freqdata *fd = NULL;
@@ -1289,7 +1289,7 @@ finish:
 
 static void lpphy_rev2plus_rc_calib(struct b43_wldev *dev)
 {
-       struct ssb_bus *bus = dev->sdev->bus;
+       struct ssb_bus *bus = dev->dev->sdev->bus;
        u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
        u8 tmp = b43_radio_read(dev, B2063_RX_BB_SP8) & 0xFF;
        int i;
@@ -2428,7 +2428,7 @@ static int lpphy_b2062_tune(struct b43_wldev *dev,
                            unsigned int channel)
 {
        struct b43_phy_lp *lpphy = dev->phy.lp;
-       struct ssb_bus *bus = dev->sdev->bus;
+       struct ssb_bus *bus = dev->dev->sdev->bus;
        const struct b206x_channel *chandata = NULL;
        u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
        u32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7, tmp8, tmp9;
@@ -2518,7 +2518,7 @@ static void lpphy_b2063_vco_calib(struct b43_wldev *dev)
 static int lpphy_b2063_tune(struct b43_wldev *dev,
                            unsigned int channel)
 {
-       struct ssb_bus *bus = dev->sdev->bus;
+       struct ssb_bus *bus = dev->dev->sdev->bus;
 
        static const struct b206x_channel *chandata = NULL;
        u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
@@ -2666,6 +2666,11 @@ static int b43_lpphy_op_init(struct b43_wldev *dev)
 {
        int err;
 
+       if (dev->dev->bus_type != B43_BUS_SSB) {
+               b43err(dev->wl, "LP-PHY is supported only on SSB!\n");
+               return -EOPNOTSUPP;
+       }
+
        lpphy_read_band_sprom(dev); //FIXME should this be in prepare_structs?
        lpphy_baseband_init(dev);
        lpphy_radio_init(dev);