A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@
ff5c0000:
'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
'clock-names' is not a valid property name for usb_host nodes with
compatible string 'generic-ehci', so remove them.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ehci.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200312171441.21144-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
reg = <0x0 0xff340000 0x0 0x10000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>;
- clock-names = "usbhost";
phys = <&u2phy_host>;
phy-names = "usb";
power-domains = <&power PX30_PD_USB>;
reg = <0x0 0xff5c0000 0x0 0x10000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>, <&u2phy>;
- clock-names = "usbhost", "utmi";
phys = <&u2phy_host>;
phy-names = "usb";
status = "disabled";
reg = <0x0 0xff500000 0x0 0x100>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>;
- clock-names = "usbhost";
status = "disabled";
};
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
<&u2phy0>;
- clock-names = "usbhost", "arbiter",
- "utmi";
phys = <&u2phy0_host>;
phy-names = "usb";
status = "disabled";
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
<&u2phy1>;
- clock-names = "usbhost", "arbiter",
- "utmi";
phys = <&u2phy1_host>;
phy-names = "usb";
status = "disabled";