PCI: qcom: Fix IPQ8074 enumeration

PARF_SLV_ADDR_SPACE_SIZE_2_3_3 is used by qcom_pcie_post_init_2_3_3().
This PCIe slave address space size register offset is 0x358 but was
incorrectly changed to 0x16c by 39171b33f652 ("PCI: qcom: Remove PCIE20_
prefix from register definitions").

This prevented access to slave address space registers like iATU, etc.,
so the IPQ8074 PCIe controller was not enumerated.

Revert back to the correct 0x358 offset and remove the unused
PARF_SLV_ADDR_SPACE_SIZE_2_3_3.

Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
Link: https://lore.kernel.org/r/20230919102948.1844909-1-quic_srichara@quicinc.com
Tested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: stable@vger.kernel.org	# v6.4+

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index e2f2940..64420ec 100644 (file)
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -43,7 +43,6 @@
 #define PARF_PHY_REFCLK                                0x4c
 #define PARF_CONFIG_BITS                       0x50
 #define PARF_DBI_BASE_ADDR                     0x168
-#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3         0x16c /* Register offset specific to IP ver 2.3.3 */
 #define PARF_MHI_CLOCK_RESET_CTRL              0x174
 #define PARF_AXI_MSTR_WR_ADDR_HALT             0x178
 #define PARF_AXI_MSTR_WR_ADDR_HALT_V2          0x1a8
@@ -797,8 +796,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
        u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
        u32 val;
 
-       writel(SLV_ADDR_SPACE_SZ,
-               pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3);
+       writel(SLV_ADDR_SPACE_SZ, pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
 
        val = readl(pcie->parf + PARF_PHY_CTRL);
        val &= ~PHY_TEST_PWR_DOWN;