include: configs: am62x_evm: Add .env file for Am62x

Use .env file for setting board related environment variables,
in place of am62x_evm.h file. Except for BOOTENV settings, as
config_distro_boot.env file doesn't exist.

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

diff --git a/board/ti/am62x/am62x.env b/board/ti/am62x/am62x.env
new file mode 100644 (file)
index 0000000..e465d00
--- /dev/null
+++ b/board/ti/am62x/am62x.env
@@ -0,0 +1,103 @@
+loadaddr=0x82000000
+kernel_addr_r=0x82000000
+fdtaddr=0x88000000
+dtboaddr=0x89000000
+fdt_addr_r=0x88000000
+fdtoverlay_addr_r=0x89000000
+rdaddr=0x88080000
+ramdisk_addr_r=0x88080000
+scriptaddr=0x80000000
+pxefile_addr_r=0x80100000
+bootm_size=0x10000000
+boot_fdt=try
+
+mmcrootfstype=ext4 rootwait
+finduuid=part uuid ${boot} ${bootpart} uuid
+args_mmc=run finduuid;setenv bootargs console=${console}
+       ${optargs}
+       root=PARTUUID=${uuid} rw
+       rootfstype=${mmcrootfstype}
+loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr
+bootscript=echo Running bootscript from mmc${mmcdev} ...;
+       source ${loadaddr}
+bootenvfile=uEnv.txt
+importbootenv=echo Importing environment from mmc${mmcdev} ...;
+       env import -t ${loadaddr} ${filesize}
+loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
+loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
+loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
+envboot=mmc dev ${mmcdev};
+       if mmc rescan; then
+               echo SD/MMC found on device ${mmcdev};
+               if run loadbootscript; then
+                       run bootscript;
+               else
+                       if run loadbootenv; then
+                               echo Loaded env from ${bootenvfile};
+                               run importbootenv;
+                       fi;
+                       if test -n $uenvcmd; then
+                               echo Running uenvcmd ...;
+                               run uenvcmd;
+                       fi;
+               fi;
+       fi;
+mmcloados=
+       if test ${boot_fdt} = yes || test ${boot_fdt} = try; then
+               if run loadfdt; then
+                       bootz ${loadaddr} - ${fdtaddr};
+               else
+                       if test ${boot_fdt} = try; then
+                               bootz;
+                       else
+                               echo WARN: Cannot load the DT;
+                       fi;
+               fi;
+       else
+               bootz;
+       fi;
+mmcboot=mmc dev ${mmcdev};
+       devnum=${mmcdev};
+       devtype=mmc;
+       if mmc rescan; then
+               echo SD/MMC found on device ${mmcdev};
+               if run loadimage; then
+                       run args_mmc;
+                       if test ${boot_fit} -eq 1; then
+                               run run_fit;
+                       else
+                               run mmcloados;
+                       fi;
+               fi;
+       fi;
+
+default_device_tree=k3-am625-sk.dtb
+findfdt=
+       setenv name_fdt ${default_device_tree};
+       setenv fdtfile ${name_fdt}
+name_kern=Image
+console=ttyS2,115200n8
+args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000
+       ${mtdparts}
+run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
+
+boot=mmc
+mmcdev=1
+bootpart=1:2
+bootdir=/boot
+rd_spec=-
+init_mmc=run args_all args_mmc
+get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}
+get_overlay_mmc=
+       fdt address ${fdtaddr};
+       fdt resize 0x100000;
+       for overlay in $name_overlays;
+       do;
+       load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} &&
+       fdt apply ${dtboaddr};
+       done;
+get_kern_mmc=load mmc ${bootpart} ${loadaddr}
+       ${bootdir}/${name_kern}
+get_fit_mmc=load mmc ${bootpart} ${addr_fit}
+       ${bootdir}/${name_fit}
+partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}

diff --git a/include/configs/am62x_evm.h b/include/configs/am62x_evm.h
index 7fbefde..7bf0780 100644 (file)
--- a/include/configs/am62x_evm.h
+++ b/include/configs/am62x_evm.h
@@ -38,51 +38,8 @@
        DISTRO_BOOT_DEV_PXE(func) \
        DISTRO_BOOT_DEV_DHCP(func)
 
-#define PARTS_DEFAULT \
-       /* Linux partitions */ \
-       "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
-
-/* U-Boot general configuration */
-#define EXTRA_ENV_AM625_BOARD_SETTINGS                                 \
-       "default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"      \
-       "findfdt="                                                      \
-               "setenv name_fdt ${default_device_tree};"               \
-               "setenv fdtfile ${name_fdt}\0"                          \
-       "name_kern=Image\0"                                             \
-       "console=ttyS2,115200n8\0"                                      \
-       "args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000 " \
-               "${mtdparts}\0"                                         \
-       "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
-
-/* U-Boot MMC-specific configuration */
-#define EXTRA_ENV_AM625_BOARD_SETTINGS_MMC                             \
-       "boot=mmc\0"                                                    \
-       "mmcdev=1\0"                                                    \
-       "bootpart=1:2\0"                                                \
-       "bootdir=/boot\0"                                               \
-       "rd_spec=-\0"                                                   \
-       "init_mmc=run args_all args_mmc\0"                              \
-       "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
-       "get_overlay_mmc="                                              \
-               "fdt address ${fdtaddr};"                               \
-               "fdt resize 0x100000;"                                  \
-               "for overlay in $name_overlays;"                        \
-               "do;"                                                   \
-               "load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && "    \
-               "fdt apply ${dtboaddr};"                                \
-               "done;\0"                                               \
-       "get_kern_mmc=load mmc ${bootpart} ${loadaddr} "                \
-               "${bootdir}/${name_kern}\0"                             \
-       "get_fit_mmc=load mmc ${bootpart} ${addr_fit} "                 \
-               "${bootdir}/${name_fit}\0"                              \
-       "partitions=" PARTS_DEFAULT
-
 /* Incorporate settings into the U-Boot environment */
 #define CFG_EXTRA_ENV_SETTINGS                                 \
-       DEFAULT_LINUX_BOOT_ENV                                          \
-       DEFAULT_MMC_TI_ARGS                                             \
-       EXTRA_ENV_AM625_BOARD_SETTINGS                                  \
-       EXTRA_ENV_AM625_BOARD_SETTINGS_MMC                              \
        BOOTENV
 
 /* Now for the remaining common defines */