Updated auto_build.sh for continuous integration improvements.

This commit effectively adds a new mode of building in the build
script. This new mode can be referenced as "parallel". Before all
builds occurred in sequence and could take a long time. Now an
individual contributor may build just a shim of the entire build
list. This will allow the Jenkins CI system to build each of the
shims in parallel to better utilize the several executors found
across the many build servers we have available for CI.

Change-Id: I945bc45201d8c3d4a5c754de02eaa623f59c8449
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/1818
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Erich Keane <erich.keane@intel.com>

diff --git a/auto_build.sh b/auto_build.sh
index d85a6523c2cff473e89183fc1d664ea2856a7ab8..69627278bd21c89196de47277e63b624382e3e28 100755 (executable)
--- a/auto_build.sh
+++ b/auto_build.sh
@@ -4,31 +4,62 @@
 # the build script.  For now, use set -e and fail the build at first failure.
 set -e
 
-function clean()
-{
-       echo "*********** Clean build *************"
-       scons -c
-       scons -f resource/csdk/connectivity/build/tizen/SConscript TARGET_OS=tizen -c
-       rm -rf out
-}
-
-function build()
+function build_all()
 {
        if [ $(uname -s) = "Linux" ]
         then
-               echo "*********** Build for linux ************"
-               scons RELEASE=$3
+               build_linux_unsecured $1 $2
+               build_linux_secured $1 $2
+               build_linux_unsecured_with_ra $1 $2
+               build_linux_secured_with_ra $1 $2
+       fi
 
-               echo "*********** Build for linux with Security *************"
-               scons RELEASE=$3 SECURED=1
+       build_android $1 $2
 
-               echo "*********** Build for linux With Remote Access *************"
-               scons RELEASE=$3 WITH_RA=1
+       build_arduino $1 $2
 
-               echo "*********** Build for linux With Remote Access & Security ************"
-               scons RELEASE=$3 WITH_RA=1 SECURED=1
+       build_tizen $1 $2
+
+       if [ $(uname -s) = "Darwin" ]
+       then
+               build_darwin $1 $2
        fi
+}
+
+function build_linux()
+{
+       build_linux_unsecured $1 $2
 
+       build_linux_secured $1 $2
+}
+
+function build_linux_unsecured()
+{
+       echo "*********** Build for linux ************"
+       scons RELEASE=$1 $2
+}
+
+function build_linux_secured()
+{
+       echo "*********** Build for linux with Security *************"
+       scons RELEASE=$1 SECURED=1 $2
+}
+
+function build_linux_unsecured_with_ra()
+{
+
+       echo "*********** Build for linux With Remote Access *************"
+       scons RELEASE=$1 WITH_RA=1 $2
+}
+
+function build_linux_secured_with_ra()
+{
+       echo "*********** Build for linux With Remote Access & Security ************"
+       scons RELEASE=$1 WITH_RA=1 SECURED=1 $2
+}
+
+function build_android()
+{
        # Note: for android, as oic-resource uses C++11 feature stoi and to_string,
        # it requires gcc-4.9, currently only android-ndk-r10(for linux)
        # and windows android-ndk-r10(64bit target version) support these features.
@@ -37,82 +68,150 @@ function build()
        export SCONSFLAGS="-Q"
 
        echo "*********** Build for android x86 *************"
-       scons TARGET_OS=android TARGET_ARCH=x86 RELEASE=$3 TARGET_TRANSPORT=IP
+       scons TARGET_OS=android TARGET_ARCH=x86 RELEASE=$1 TARGET_TRANSPORT=IP $2
 
        echo "*********** Build for android armeabi *************"
-       scons TARGET_OS=android TARGET_ARCH=armeabi RELEASE=$3 TARGET_TRANSPORT=IP
+       scons TARGET_OS=android TARGET_ARCH=armeabi RELEASE=$1 TARGET_TRANSPORT=IP $2
 
        # enable parallel build
        export SCONSFLAGS="-Q -j 4"
+}
 
+function build_arduino()
+{
        echo "*********** Build for arduino avr *************"
-       scons resource TARGET_OS=arduino UPLOAD=false BOARD=mega TARGET_ARCH=avr TARGET_TRANSPORT=IP SHIELD=ETH RELEASE=$3
-       scons resource TARGET_OS=arduino UPLOAD=false BOARD=mega TARGET_ARCH=avr TARGET_TRANSPORT=IP SHIELD=WIFI RELEASE=$3
+       scons resource TARGET_OS=arduino UPLOAD=false BOARD=mega TARGET_ARCH=avr TARGET_TRANSPORT=IP SHIELD=ETH RELEASE=$1 $2
+       scons resource TARGET_OS=arduino UPLOAD=false BOARD=mega TARGET_ARCH=avr TARGET_TRANSPORT=IP SHIELD=WIFI RELEASE=$1 $2
 
        echo "*********** Build for arduino arm *************"
-       scons resource TARGET_OS=arduino UPLOAD=false BOARD=arduino_due_x TARGET_ARCH=arm TARGET_TRANSPORT=IP SHIELD=ETH RELEASE=$3
-       scons resource TARGET_OS=arduino UPLOAD=false BOARD=arduino_due_x TARGET_ARCH=arm TARGET_TRANSPORT=IP SHIELD=WIFI RELEASE=$3
+       scons resource TARGET_OS=arduino UPLOAD=false BOARD=arduino_due_x TARGET_ARCH=arm TARGET_TRANSPORT=IP SHIELD=ETH RELEASE=$1 $2
+       scons resource TARGET_OS=arduino UPLOAD=false BOARD=arduino_due_x TARGET_ARCH=arm TARGET_TRANSPORT=IP SHIELD=WIFI RELEASE=$1 $2
+}
 
+function build_tizen()
+{
        echo "*********** Build for Tizen CA lib and sample *************"
-    scons -f resource/csdk/connectivity/build/tizen/SConscript TARGET_OS=tizen TARGET_TRANSPORT=IP LOGGING=true RELEASE=$3
+       scons -f resource/csdk/connectivity/build/tizen/SConscript TARGET_OS=tizen TARGET_TRANSPORT=IP LOGGING=true RELEASE=$1 $2
 
        echo "*********** Build for Tizen CA lib and sample with Security *************"
-    scons -f resource/csdk/connectivity/build/tizen/SConscript TARGET_OS=tizen TARGET_TRANSPORT=IP LOGGING=true SECURED=1 RELEASE=$3
+       scons -f resource/csdk/connectivity/build/tizen/SConscript TARGET_OS=tizen TARGET_TRANSPORT=IP LOGGING=true SECURED=1 RELEASE=$1 $2
+}
 
-       if [ $(uname -s) = "Darwin" ]
-       then
-               echo "*********** Build for OSX *************"
-               scons TARGET_OS=darwin SYS_VERSION=10.9 RELEASE=$3
+function build_darwin() # Mac OSx and iOS
+{
+       echo "*********** Build for OSX *************"
+       scons TARGET_OS=darwin SYS_VERSION=10.9 RELEASE=$1 $2
 
-               echo "*********** Build for IOS i386 *************"
-               scons TARGET_OS=ios TARGET_ARCH=i386 SYS_VERSION=7.0 RELEASE=$3
+       echo "*********** Build for IOS i386 *************"
+       scons TARGET_OS=ios TARGET_ARCH=i386 SYS_VERSION=7.0 RELEASE=$1 $2
 
-               echo "*********** Build for IOS x86_64 *************"
-               scons TARGET_OS=ios TARGET_ARCH=x86_64 SYS_VERSION=7.0 RELEASE=$3
+       echo "*********** Build for IOS x86_64 *************"
+       scons TARGET_OS=ios TARGET_ARCH=x86_64 SYS_VERSION=7.0 RELEASE=$1 $2
 
-               echo "*********** Build for IOS armv7 *************"
-               scons TARGET_OS=ios TARGET_ARCH=armv7 SYS_VERSION=7.0 RELEASE=$3
+       echo "*********** Build for IOS armv7 *************"
+       scons TARGET_OS=ios TARGET_ARCH=armv7 SYS_VERSION=7.0 RELEASE=$1 $2
 
-               echo "*********** Build for IOS armv7s *************"
-               scons TARGET_OS=ios TARGET_ARCH=armv7s SYS_VERSION=7.0 RELEASE=$3
+       echo "*********** Build for IOS armv7s *************"
+       scons TARGET_OS=ios TARGET_ARCH=armv7s SYS_VERSION=7.0 RELEASE=$1 $2
 
-               echo "*********** Build for IOS arm64 *************"
-               scons TARGET_OS=ios TARGET_ARCH=arm64 SYS_VERSION=7.0 RELEASE=$3
-       fi
+       echo "*********** Build for IOS arm64 *************"
+       scons TARGET_OS=ios TARGET_ARCH=arm64 SYS_VERSION=7.0 RELEASE=$1 $2
+}
+
+function unit_tests()
+{
+       scons resource RELEASE=false -c
+       scons resource LOGGING=false RELEASE=false
+       scons resource TEST=1 RELEASE=false
 }
 
 function  help()
 {
        echo "Usage:"
         echo "  build:"
-        echo "     `basename $0` <path-to-android-ndk> <path-to-arduino-sdk>"
+        echo "     `basename $0` <target_build>"
+       echo "      Allowed values for <target_build>: all, linux_unsecured, linux_secured, linux_unsecured_with_ra, linux_secured_with_ra, android, arduino, tizen, darwin"
+       echo "      Note: \"linux\" will build \"linux_unsecured\", \"linux_secured\", \"linux_unsecured_with_ra\" & \"linux_secured_with_ra\"."
+       echo "      Any selection will build both debug and release versions of all available targets in the scope you've"
+       echo "      selected. To choose any specific command, please use the SCons commandline directly. Please refer"
+       echo "      to [IOTIVITY_REPO]/Readme.scons.txt."
         echo "  clean:"
         echo "     `basename $0` -c"
 }
 
+# Suppress "Reading ..." message and enable parallel build
+export SCONSFLAGS="-Q -j 4"
+
 if [ $# -eq 1 ]
 then
        if [ $1 = '-c' ]
        then
-               clean
+               build_all true $1
+               build_all false $1
                exit 0
+       elif [ $1 = 'all' ]
+       then
+               build_all true
+               build_all false
+               unit_tests
+       elif [ $1 = 'linux' ]
+       then
+               build_linux true
+               build_linux false
+       elif [ $1 = 'linux_unsecured' ]
+       then
+               build_linux_unsecured true
+               build_linux_unsecured false
+       elif [ $1 = 'linux_secured' ]
+       then
+               build_linux_secured true
+               build_linux_secured false
+       elif [ $1 = 'linux_unsecured_with_ra' ]
+       then
+               build_linux_unsecured_with_ra true
+               build_linux_unsecured_with_ra false
+       elif [ $1 = 'linux_secured_with_ra' ]
+       then
+               build_linux_secured_with_ra true
+               build_linux_secured_with_ra false
+       elif [ $1 = 'android' ]
+       then
+               build_android true
+               build_android false
+       elif [ $1 = 'arduino' ]
+       then
+               build_arduino true
+               build_arduino false
+       elif [ $1 = 'tizen' ]
+       then
+               build_tizen true
+               build_tizen false
+       elif [ $1 = 'darwin' ]
+       then
+               build_darwin true
+               build_darwin false
+       elif [ $1 = 'unit_tests' ]
+       then
+               unit_tests
        else
                help
                exit -1
        fi
-elif [ $# -ne 2 ]
+elif [ $# -eq 0 ]
 then
+       build_all true
+       build_all false
+       unit_tests
+else
        help
-       exit -1
+#This is temporarily changed to support the transition on the Jenkins Build Server so that current work is not hindered.
+#      exit -1
+####DELETE THE FOLLOWING 3 LINES!! And uncomment the line directly above this line!
+       build_all true
+       build_all false
+       unit_tests
 fi
 
-# Suppress "Reading ..." message and enable parallel build
-export SCONSFLAGS="-Q -j 4"
-build $1 $2 true
-build $1 $2 false
-scons resource RELEASE=false -c
-scons resource LOGGING=false RELEASE=false
-scons resource TEST=1 RELEASE=false
 echo "===================== done ====================="