mtd: spi-nor: nxp-spifi: Use helper function devm_clk_get_enabled()
authorLi Zetao <lizetao1@huawei.com>
Fri, 18 Aug 2023 07:46:41 +0000 (15:46 +0800)
committerTudor Ambarus <tudor.ambarus@linaro.org>
Fri, 18 Aug 2023 10:14:56 +0000 (13:14 +0300)
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enable (and possibly
prepare) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clock explicitly, so drop
the label "dis_clks" and "dis_clk_reg".

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230818074642.308166-12-lizetao1@huawei.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
drivers/mtd/spi-nor/controllers/nxp-spifi.c

index 794c7b7..0c21b76 100644 (file)
@@ -395,30 +395,18 @@ static int nxp_spifi_probe(struct platform_device *pdev)
        if (IS_ERR(spifi->flash_base))
                return PTR_ERR(spifi->flash_base);
 
-       spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi");
+       spifi->clk_spifi = devm_clk_get_enabled(&pdev->dev, "spifi");
        if (IS_ERR(spifi->clk_spifi)) {
-               dev_err(&pdev->dev, "spifi clock not found\n");
+               dev_err(&pdev->dev, "spifi clock not found or unable to enable\n");
                return PTR_ERR(spifi->clk_spifi);
        }
 
-       spifi->clk_reg = devm_clk_get(&pdev->dev, "reg");
+       spifi->clk_reg = devm_clk_get_enabled(&pdev->dev, "reg");
        if (IS_ERR(spifi->clk_reg)) {
-               dev_err(&pdev->dev, "reg clock not found\n");
+               dev_err(&pdev->dev, "reg clock not found or unable to enable\n");
                return PTR_ERR(spifi->clk_reg);
        }
 
-       ret = clk_prepare_enable(spifi->clk_reg);
-       if (ret) {
-               dev_err(&pdev->dev, "unable to enable reg clock\n");
-               return ret;
-       }
-
-       ret = clk_prepare_enable(spifi->clk_spifi);
-       if (ret) {
-               dev_err(&pdev->dev, "unable to enable spifi clock\n");
-               goto dis_clk_reg;
-       }
-
        spifi->dev = &pdev->dev;
        platform_set_drvdata(pdev, spifi);
 
@@ -431,24 +419,17 @@ static int nxp_spifi_probe(struct platform_device *pdev)
        flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
        if (!flash_np) {
                dev_err(&pdev->dev, "no SPI flash device to configure\n");
-               ret = -ENODEV;
-               goto dis_clks;
+               return -ENODEV;
        }
 
        ret = nxp_spifi_setup_flash(spifi, flash_np);
        of_node_put(flash_np);
        if (ret) {
                dev_err(&pdev->dev, "unable to setup flash chip\n");
-               goto dis_clks;
+               return ret;
        }
 
        return 0;
-
-dis_clks:
-       clk_disable_unprepare(spifi->clk_spifi);
-dis_clk_reg:
-       clk_disable_unprepare(spifi->clk_reg);
-       return ret;
 }
 
 static int nxp_spifi_remove(struct platform_device *pdev)
@@ -456,8 +437,6 @@ static int nxp_spifi_remove(struct platform_device *pdev)
        struct nxp_spifi *spifi = platform_get_drvdata(pdev);
 
        mtd_device_unregister(&spifi->nor.mtd);
-       clk_disable_unprepare(spifi->clk_spifi);
-       clk_disable_unprepare(spifi->clk_reg);
 
        return 0;
 }