The platform is removed, so there are no users of this driver.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Cc: Carolyn Wyborny <carolyn.wyborny@intel.com>
Cc: Don Skidmore <donald.c.skidmore@intel.com>
Cc: Greg Rose <gregory.v.rose@intel.com>
Cc: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Cc: Alex Duyck <alexander.h.duyck@intel.com>
Cc: John Ronciak <john.ronciak@intel.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
S: Maintained
F: drivers/char/hw_random/ixp4xx-rng.c
-INTEL IXP2000 ETHERNET DRIVER
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: netdev@vger.kernel.org
-S: Maintained
-F: drivers/net/ethernet/xscale/ixp2000/
-
INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
M: Jesse Brandeburg <jesse.brandeburg@intel.com>
default y
depends on PCI || PCI_MSI || ISA || ISA_DMA_API || ARM || \
ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \
- GSC || BVME6000 || MVME16x || ARCH_ENP2611 || \
+ GSC || BVME6000 || MVME16x || \
(ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR) || \
EXPERIMENTAL
---help---
config NET_VENDOR_XSCALE
bool "Intel XScale IXP devices"
default y
- depends on NET_VENDOR_INTEL && ((ARM && ARCH_IXP4XX && \
- IXP4XX_NPE && IXP4XX_QMGR) || ARCH_ENP2611)
+ depends on NET_VENDOR_INTEL && (ARM && ARCH_IXP4XX && \
+ IXP4XX_NPE && IXP4XX_QMGR)
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
Say Y here if you want to use built-in Ethernet ports
on IXP4xx processor.
-source "drivers/net/ethernet/xscale/ixp2000/Kconfig"
-
endif # NET_VENDOR_XSCALE
# Makefile for the Intel XScale IXP device drivers.
#
-obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
+++ /dev/null
-config ENP2611_MSF_NET
- tristate "Radisys ENP2611 MSF network interface support"
- depends on ARCH_ENP2611
- ---help---
- This is a driver for the MSF network interface unit in
- the IXP2400 on the Radisys ENP2611 platform.
+++ /dev/null
-obj-$(CONFIG_ENP2611_MSF_NET) += enp2611_mod.o
-
-enp2611_mod-objs := caleb.o enp2611.o ixp2400-msf.o ixpdev.o pm3386.o
+++ /dev/null
-/*
- * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include "caleb.h"
-
-#define CALEB_IDLO 0x00
-#define CALEB_IDHI 0x01
-#define CALEB_RID 0x02
-#define CALEB_RESET 0x03
-#define CALEB_INTREN0 0x04
-#define CALEB_INTREN1 0x05
-#define CALEB_INTRSTAT0 0x06
-#define CALEB_INTRSTAT1 0x07
-#define CALEB_PORTEN 0x08
-#define CALEB_BURST 0x09
-#define CALEB_PORTPAUS 0x0A
-#define CALEB_PORTPAUSD 0x0B
-#define CALEB_PHY0RX 0x10
-#define CALEB_PHY1RX 0x11
-#define CALEB_PHY0TX 0x12
-#define CALEB_PHY1TX 0x13
-#define CALEB_IXPRX_HI_CNTR 0x15
-#define CALEB_PHY0RX_HI_CNTR 0x16
-#define CALEB_PHY1RX_HI_CNTR 0x17
-#define CALEB_IXPRX_CNTR 0x18
-#define CALEB_PHY0RX_CNTR 0x19
-#define CALEB_PHY1RX_CNTR 0x1A
-#define CALEB_IXPTX_CNTR 0x1B
-#define CALEB_PHY0TX_CNTR 0x1C
-#define CALEB_PHY1TX_CNTR 0x1D
-#define CALEB_DEBUG0 0x1E
-#define CALEB_DEBUG1 0x1F
-
-
-static u8 caleb_reg_read(int reg)
-{
- u8 value;
-
- value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg));
-
-// printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value);
-
- return value;
-}
-
-static void caleb_reg_write(int reg, u8 value)
-{
- u8 dummy;
-
-// printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value);
-
- *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value;
-
- dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE);
- __asm__ __volatile__("mov %0, %0" : "+r" (dummy));
-}
-
-
-void caleb_reset(void)
-{
- /*
- * Perform a chip reset.
- */
- caleb_reg_write(CALEB_RESET, 0x02);
- udelay(1);
-
- /*
- * Enable all interrupt sources. This is needed to get
- * meaningful results out of the status bits (register 6
- * and 7.)
- */
- caleb_reg_write(CALEB_INTREN0, 0xff);
- caleb_reg_write(CALEB_INTREN1, 0x07);
-
- /*
- * Set RX and TX FIFO thresholds to 1.5kb.
- */
- caleb_reg_write(CALEB_PHY0RX, 0x11);
- caleb_reg_write(CALEB_PHY1RX, 0x11);
- caleb_reg_write(CALEB_PHY0TX, 0x11);
- caleb_reg_write(CALEB_PHY1TX, 0x11);
-
- /*
- * Program SPI-3 burst size.
- */
- caleb_reg_write(CALEB_BURST, 0); // 64-byte RBUF mpackets
-// caleb_reg_write(CALEB_BURST, 1); // 128-byte RBUF mpackets
-// caleb_reg_write(CALEB_BURST, 2); // 256-byte RBUF mpackets
-}
-
-void caleb_enable_rx(int port)
-{
- u8 temp;
-
- temp = caleb_reg_read(CALEB_PORTEN);
- temp |= 1 << port;
- caleb_reg_write(CALEB_PORTEN, temp);
-}
-
-void caleb_disable_rx(int port)
-{
- u8 temp;
-
- temp = caleb_reg_read(CALEB_PORTEN);
- temp &= ~(1 << port);
- caleb_reg_write(CALEB_PORTEN, temp);
-}
-
-void caleb_enable_tx(int port)
-{
- u8 temp;
-
- temp = caleb_reg_read(CALEB_PORTEN);
- temp |= 1 << (port + 4);
- caleb_reg_write(CALEB_PORTEN, temp);
-}
-
-void caleb_disable_tx(int port)
-{
- u8 temp;
-
- temp = caleb_reg_read(CALEB_PORTEN);
- temp &= ~(1 << (port + 4));
- caleb_reg_write(CALEB_PORTEN, temp);
-}
+++ /dev/null
-/*
- * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __CALEB_H
-#define __CALEB_H
-
-void caleb_reset(void);
-void caleb_enable_rx(int port);
-void caleb_disable_rx(int port);
-void caleb_enable_tx(int port);
-void caleb_disable_tx(int port);
-
-
-#endif
+++ /dev/null
-/*
- * IXP2400 MSF network device driver for the Radisys ENP2611
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/moduleparam.h>
-#include <asm/hardware/uengine.h>
-#include <asm/mach-types.h>
-#include <asm/io.h>
-#include "ixpdev.h"
-#include "caleb.h"
-#include "ixp2400-msf.h"
-#include "pm3386.h"
-
-/***********************************************************************
- * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC
- * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA
- * to the IXP2400.
- *
- * +-------------+
- * SFP GBIC #0 ---+ | +---------+
- * | PM3386 #0 +-------+ |
- * SFP GBIC #1 ---+ | | "Caleb" | +---------+
- * +-------------+ | | | |
- * | SPI-3 +---------+ IXP2400 |
- * +-------------+ | bridge | | |
- * SFP GBIC #2 ---+ | | FPGA | +---------+
- * | PM3386 #1 +-------+ |
- * | | +---------+
- * +-------------+
- * ^ ^ ^
- * | 1.25Gbaud | 104MHz | 104MHz
- * | SERDES ea. | SPI-3 ea. | SPI-3
- *
- ***********************************************************************/
-static struct ixp2400_msf_parameters enp2611_msf_parameters =
-{
- .rx_mode = IXP2400_RX_MODE_UTOPIA_POS |
- IXP2400_RX_MODE_1x32 |
- IXP2400_RX_MODE_MPHY |
- IXP2400_RX_MODE_MPHY_32 |
- IXP2400_RX_MODE_MPHY_POLLED_STATUS |
- IXP2400_RX_MODE_MPHY_LEVEL3 |
- IXP2400_RX_MODE_RBUF_SIZE_64,
-
- .rxclk01_multiplier = IXP2400_PLL_MULTIPLIER_16,
-
- .rx_poll_ports = 3,
-
- .rx_channel_mode = {
- IXP2400_PORT_RX_MODE_MASTER |
- IXP2400_PORT_RX_MODE_POS_PHY |
- IXP2400_PORT_RX_MODE_POS_PHY_L3 |
- IXP2400_PORT_RX_MODE_ODD_PARITY |
- IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
-
- IXP2400_PORT_RX_MODE_MASTER |
- IXP2400_PORT_RX_MODE_POS_PHY |
- IXP2400_PORT_RX_MODE_POS_PHY_L3 |
- IXP2400_PORT_RX_MODE_ODD_PARITY |
- IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
-
- IXP2400_PORT_RX_MODE_MASTER |
- IXP2400_PORT_RX_MODE_POS_PHY |
- IXP2400_PORT_RX_MODE_POS_PHY_L3 |
- IXP2400_PORT_RX_MODE_ODD_PARITY |
- IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
-
- IXP2400_PORT_RX_MODE_MASTER |
- IXP2400_PORT_RX_MODE_POS_PHY |
- IXP2400_PORT_RX_MODE_POS_PHY_L3 |
- IXP2400_PORT_RX_MODE_ODD_PARITY |
- IXP2400_PORT_RX_MODE_2_CYCLE_DECODE
- },
-
- .tx_mode = IXP2400_TX_MODE_UTOPIA_POS |
- IXP2400_TX_MODE_1x32 |
- IXP2400_TX_MODE_MPHY |
- IXP2400_TX_MODE_MPHY_32 |
- IXP2400_TX_MODE_MPHY_POLLED_STATUS |
- IXP2400_TX_MODE_MPHY_LEVEL3 |
- IXP2400_TX_MODE_TBUF_SIZE_64,
-
- .txclk01_multiplier = IXP2400_PLL_MULTIPLIER_16,
-
- .tx_poll_ports = 3,
-
- .tx_channel_mode = {
- IXP2400_PORT_TX_MODE_MASTER |
- IXP2400_PORT_TX_MODE_POS_PHY |
- IXP2400_PORT_TX_MODE_ODD_PARITY |
- IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
-
- IXP2400_PORT_TX_MODE_MASTER |
- IXP2400_PORT_TX_MODE_POS_PHY |
- IXP2400_PORT_TX_MODE_ODD_PARITY |
- IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
-
- IXP2400_PORT_TX_MODE_MASTER |
- IXP2400_PORT_TX_MODE_POS_PHY |
- IXP2400_PORT_TX_MODE_ODD_PARITY |
- IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
-
- IXP2400_PORT_TX_MODE_MASTER |
- IXP2400_PORT_TX_MODE_POS_PHY |
- IXP2400_PORT_TX_MODE_ODD_PARITY |
- IXP2400_PORT_TX_MODE_2_CYCLE_DECODE
- }
-};
-
-static struct net_device *nds[3];
-static struct timer_list link_check_timer;
-
-/* @@@ Poll the SFP moddef0 line too. */
-/* @@@ Try to use the pm3386 DOOL interrupt as well. */
-static void enp2611_check_link_status(unsigned long __dummy)
-{
- int i;
-
- for (i = 0; i < 3; i++) {
- struct net_device *dev;
- int status;
-
- dev = nds[i];
- if (dev == NULL)
- continue;
-
- status = pm3386_is_link_up(i);
- if (status && !netif_carrier_ok(dev)) {
- /* @@@ Should report autonegotiation status. */
- printk(KERN_INFO "%s: NIC Link is Up\n", dev->name);
-
- pm3386_enable_tx(i);
- caleb_enable_tx(i);
- netif_carrier_on(dev);
- } else if (!status && netif_carrier_ok(dev)) {
- printk(KERN_INFO "%s: NIC Link is Down\n", dev->name);
-
- netif_carrier_off(dev);
- caleb_disable_tx(i);
- pm3386_disable_tx(i);
- }
- }
-
- link_check_timer.expires = jiffies + HZ / 10;
- add_timer(&link_check_timer);
-}
-
-static void enp2611_set_port_admin_status(int port, int up)
-{
- if (up) {
- caleb_enable_rx(port);
-
- pm3386_set_carrier(port, 1);
- pm3386_enable_rx(port);
- } else {
- caleb_disable_tx(port);
- pm3386_disable_tx(port);
- /* @@@ Flush out pending packets. */
- pm3386_set_carrier(port, 0);
-
- pm3386_disable_rx(port);
- caleb_disable_rx(port);
- }
-}
-
-static int __init enp2611_init_module(void)
-{
- int ports;
- int i;
-
- if (!machine_is_enp2611())
- return -ENODEV;
-
- caleb_reset();
- pm3386_reset();
-
- ports = pm3386_port_count();
- for (i = 0; i < ports; i++) {
- nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv));
- if (nds[i] == NULL) {
- while (--i >= 0)
- free_netdev(nds[i]);
- return -ENOMEM;
- }
-
- pm3386_init_port(i);
- pm3386_get_mac(i, nds[i]->dev_addr);
- }
-
- ixp2400_msf_init(&enp2611_msf_parameters);
-
- if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) {
- for (i = 0; i < ports; i++)
- if (nds[i])
- free_netdev(nds[i]);
- return -EINVAL;
- }
-
- init_timer(&link_check_timer);
- link_check_timer.function = enp2611_check_link_status;
- link_check_timer.expires = jiffies;
- add_timer(&link_check_timer);
-
- return 0;
-}
-
-static void __exit enp2611_cleanup_module(void)
-{
- int i;
-
- del_timer_sync(&link_check_timer);
-
- ixpdev_deinit();
- for (i = 0; i < 3; i++)
- free_netdev(nds[i]);
-}
-
-module_init(enp2611_init_module);
-module_exit(enp2611_cleanup_module);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Generic library functions for the MSF (Media and Switch Fabric) unit
- * found on the Intel IXP2400 network processor.
- *
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of the
- * License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <mach/hardware.h>
-#include <mach/ixp2000-regs.h>
-#include <asm/delay.h>
-#include <asm/io.h>
-#include "ixp2400-msf.h"
-
-/*
- * This is the Intel recommended PLL init procedure as described on
- * page 340 of the IXP2400/IXP2800 Programmer's Reference Manual.
- */
-static void ixp2400_pll_init(struct ixp2400_msf_parameters *mp)
-{
- int rx_dual_clock;
- int tx_dual_clock;
- u32 value;
-
- /*
- * If the RX mode is not 1x32, we have to enable both RX PLLs
- * (#0 and #1.) The same thing for the TX direction.
- */
- rx_dual_clock = !!(mp->rx_mode & IXP2400_RX_MODE_WIDTH_MASK);
- tx_dual_clock = !!(mp->tx_mode & IXP2400_TX_MODE_WIDTH_MASK);
-
- /*
- * Read initial value.
- */
- value = ixp2000_reg_read(IXP2000_MSF_CLK_CNTRL);
-
- /*
- * Put PLLs in powerdown and bypass mode.
- */
- value |= 0x0000f0f0;
- ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
-
- /*
- * Set single or dual clock mode bits.
- */
- value &= ~0x03000000;
- value |= (rx_dual_clock << 24) | (tx_dual_clock << 25);
-
- /*
- * Set multipliers.
- */
- value &= ~0x00ff0000;
- value |= mp->rxclk01_multiplier << 16;
- value |= mp->rxclk23_multiplier << 18;
- value |= mp->txclk01_multiplier << 20;
- value |= mp->txclk23_multiplier << 22;
-
- /*
- * And write value.
- */
- ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
-
- /*
- * Disable PLL bypass mode.
- */
- value &= ~(0x00005000 | rx_dual_clock << 13 | tx_dual_clock << 15);
- ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
-
- /*
- * Turn on PLLs.
- */
- value &= ~(0x00000050 | rx_dual_clock << 5 | tx_dual_clock << 7);
- ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
-
- /*
- * Wait for PLLs to lock. There are lock status bits, but IXP2400
- * erratum #65 says that these lock bits should not be relied upon
- * as they might not accurately reflect the true state of the PLLs.
- */
- udelay(100);
-}
-
-/*
- * Needed according to p480 of Programmer's Reference Manual.
- */
-static void ixp2400_msf_free_rbuf_entries(struct ixp2400_msf_parameters *mp)
-{
- int size_bits;
- int i;
-
- /*
- * Work around IXP2400 erratum #69 (silent RBUF-to-DRAM transfer
- * corruption) in the Intel-recommended way: do not add the RBUF
- * elements susceptible to corruption to the freelist.
- */
- size_bits = mp->rx_mode & IXP2400_RX_MODE_RBUF_SIZE_MASK;
- if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_64) {
- for (i = 1; i < 128; i++) {
- if (i == 9 || i == 18 || i == 27)
- continue;
- ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
- }
- } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_128) {
- for (i = 1; i < 64; i++) {
- if (i == 4 || i == 9 || i == 13)
- continue;
- ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
- }
- } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_256) {
- for (i = 1; i < 32; i++) {
- if (i == 2 || i == 4 || i == 6)
- continue;
- ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
- }
- }
-}
-
-static u32 ixp2400_msf_valid_channels(u32 reg)
-{
- u32 channels;
-
- channels = 0;
- switch (reg & IXP2400_RX_MODE_WIDTH_MASK) {
- case IXP2400_RX_MODE_1x32:
- channels = 0x1;
- if (reg & IXP2400_RX_MODE_MPHY &&
- !(reg & IXP2400_RX_MODE_MPHY_32))
- channels = 0xf;
- break;
-
- case IXP2400_RX_MODE_2x16:
- channels = 0x5;
- break;
-
- case IXP2400_RX_MODE_4x8:
- channels = 0xf;
- break;
-
- case IXP2400_RX_MODE_1x16_2x8:
- channels = 0xd;
- break;
- }
-
- return channels;
-}
-
-static void ixp2400_msf_enable_rx(struct ixp2400_msf_parameters *mp)
-{
- u32 value;
-
- value = ixp2000_reg_read(IXP2000_MSF_RX_CONTROL) & 0x0fffffff;
- value |= ixp2400_msf_valid_channels(mp->rx_mode) << 28;
- ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, value);
-}
-
-static void ixp2400_msf_enable_tx(struct ixp2400_msf_parameters *mp)
-{
- u32 value;
-
- value = ixp2000_reg_read(IXP2000_MSF_TX_CONTROL) & 0x0fffffff;
- value |= ixp2400_msf_valid_channels(mp->tx_mode) << 28;
- ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, value);
-}
-
-
-void ixp2400_msf_init(struct ixp2400_msf_parameters *mp)
-{
- u32 value;
- int i;
-
- /*
- * Init the RX/TX PLLs based on the passed parameter block.
- */
- ixp2400_pll_init(mp);
-
- /*
- * Reset MSF. Bit 7 in IXP_RESET_0 resets the MSF.
- */
- value = ixp2000_reg_read(IXP2000_RESET0);
- ixp2000_reg_write(IXP2000_RESET0, value | 0x80);
- ixp2000_reg_write(IXP2000_RESET0, value & ~0x80);
-
- /*
- * Initialise the RX section.
- */
- ixp2000_reg_write(IXP2000_MSF_RX_MPHY_POLL_LIMIT, mp->rx_poll_ports - 1);
- ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, mp->rx_mode);
- for (i = 0; i < 4; i++) {
- ixp2000_reg_write(IXP2000_MSF_RX_UP_CONTROL_0 + i,
- mp->rx_channel_mode[i]);
- }
- ixp2400_msf_free_rbuf_entries(mp);
- ixp2400_msf_enable_rx(mp);
-
- /*
- * Initialise the TX section.
- */
- ixp2000_reg_write(IXP2000_MSF_TX_MPHY_POLL_LIMIT, mp->tx_poll_ports - 1);
- ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, mp->tx_mode);
- for (i = 0; i < 4; i++) {
- ixp2000_reg_write(IXP2000_MSF_TX_UP_CONTROL_0 + i,
- mp->tx_channel_mode[i]);
- }
- ixp2400_msf_enable_tx(mp);
-}
+++ /dev/null
-/*
- * Generic library functions for the MSF (Media and Switch Fabric) unit
- * found on the Intel IXP2400 network processor.
- *
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of the
- * License, or (at your option) any later version.
- */
-
-#ifndef __IXP2400_MSF_H
-#define __IXP2400_MSF_H
-
-struct ixp2400_msf_parameters
-{
- u32 rx_mode;
- unsigned rxclk01_multiplier:2;
- unsigned rxclk23_multiplier:2;
- unsigned rx_poll_ports:6;
- u32 rx_channel_mode[4];
-
- u32 tx_mode;
- unsigned txclk01_multiplier:2;
- unsigned txclk23_multiplier:2;
- unsigned tx_poll_ports:6;
- u32 tx_channel_mode[4];
-};
-
-void ixp2400_msf_init(struct ixp2400_msf_parameters *mp);
-
-#define IXP2400_PLL_MULTIPLIER_48 0x00
-#define IXP2400_PLL_MULTIPLIER_24 0x01
-#define IXP2400_PLL_MULTIPLIER_16 0x02
-#define IXP2400_PLL_MULTIPLIER_12 0x03
-
-#define IXP2400_RX_MODE_CSIX 0x00400000
-#define IXP2400_RX_MODE_UTOPIA_POS 0x00000000
-#define IXP2400_RX_MODE_WIDTH_MASK 0x00300000
-#define IXP2400_RX_MODE_1x16_2x8 0x00300000
-#define IXP2400_RX_MODE_4x8 0x00200000
-#define IXP2400_RX_MODE_2x16 0x00100000
-#define IXP2400_RX_MODE_1x32 0x00000000
-#define IXP2400_RX_MODE_MPHY 0x00080000
-#define IXP2400_RX_MODE_SPHY 0x00000000
-#define IXP2400_RX_MODE_MPHY_32 0x00040000
-#define IXP2400_RX_MODE_MPHY_4 0x00000000
-#define IXP2400_RX_MODE_MPHY_POLLED_STATUS 0x00020000
-#define IXP2400_RX_MODE_MPHY_DIRECT_STATUS 0x00000000
-#define IXP2400_RX_MODE_CBUS_FULL_DUPLEX 0x00010000
-#define IXP2400_RX_MODE_CBUS_SIMPLEX 0x00000000
-#define IXP2400_RX_MODE_MPHY_LEVEL2 0x00004000
-#define IXP2400_RX_MODE_MPHY_LEVEL3 0x00000000
-#define IXP2400_RX_MODE_CBUS_8BIT 0x00002000
-#define IXP2400_RX_MODE_CBUS_4BIT 0x00000000
-#define IXP2400_RX_MODE_CSIX_SINGLE_FREELIST 0x00000200
-#define IXP2400_RX_MODE_CSIX_SPLIT_FREELISTS 0x00000000
-#define IXP2400_RX_MODE_RBUF_SIZE_MASK 0x0000000c
-#define IXP2400_RX_MODE_RBUF_SIZE_256 0x00000008
-#define IXP2400_RX_MODE_RBUF_SIZE_128 0x00000004
-#define IXP2400_RX_MODE_RBUF_SIZE_64 0x00000000
-
-#define IXP2400_PORT_RX_MODE_SLAVE 0x00000040
-#define IXP2400_PORT_RX_MODE_MASTER 0x00000000
-#define IXP2400_PORT_RX_MODE_POS_PHY_L3 0x00000020
-#define IXP2400_PORT_RX_MODE_POS_PHY_L2 0x00000000
-#define IXP2400_PORT_RX_MODE_POS_PHY 0x00000010
-#define IXP2400_PORT_RX_MODE_UTOPIA 0x00000000
-#define IXP2400_PORT_RX_MODE_EVEN_PARITY 0x0000000c
-#define IXP2400_PORT_RX_MODE_ODD_PARITY 0x00000008
-#define IXP2400_PORT_RX_MODE_NO_PARITY 0x00000000
-#define IXP2400_PORT_RX_MODE_UTOPIA_BIG_CELLS 0x00000002
-#define IXP2400_PORT_RX_MODE_UTOPIA_NORMAL_CELLS 0x00000000
-#define IXP2400_PORT_RX_MODE_2_CYCLE_DECODE 0x00000001
-#define IXP2400_PORT_RX_MODE_1_CYCLE_DECODE 0x00000000
-
-#define IXP2400_TX_MODE_CSIX 0x00400000
-#define IXP2400_TX_MODE_UTOPIA_POS 0x00000000
-#define IXP2400_TX_MODE_WIDTH_MASK 0x00300000
-#define IXP2400_TX_MODE_1x16_2x8 0x00300000
-#define IXP2400_TX_MODE_4x8 0x00200000
-#define IXP2400_TX_MODE_2x16 0x00100000
-#define IXP2400_TX_MODE_1x32 0x00000000
-#define IXP2400_TX_MODE_MPHY 0x00080000
-#define IXP2400_TX_MODE_SPHY 0x00000000
-#define IXP2400_TX_MODE_MPHY_32 0x00040000
-#define IXP2400_TX_MODE_MPHY_4 0x00000000
-#define IXP2400_TX_MODE_MPHY_POLLED_STATUS 0x00020000
-#define IXP2400_TX_MODE_MPHY_DIRECT_STATUS 0x00000000
-#define IXP2400_TX_MODE_CBUS_FULL_DUPLEX 0x00010000
-#define IXP2400_TX_MODE_CBUS_SIMPLEX 0x00000000
-#define IXP2400_TX_MODE_MPHY_LEVEL2 0x00004000
-#define IXP2400_TX_MODE_MPHY_LEVEL3 0x00000000
-#define IXP2400_TX_MODE_CBUS_8BIT 0x00002000
-#define IXP2400_TX_MODE_CBUS_4BIT 0x00000000
-#define IXP2400_TX_MODE_TBUF_SIZE_MASK 0x0000000c
-#define IXP2400_TX_MODE_TBUF_SIZE_256 0x00000008
-#define IXP2400_TX_MODE_TBUF_SIZE_128 0x00000004
-#define IXP2400_TX_MODE_TBUF_SIZE_64 0x00000000
-
-#define IXP2400_PORT_TX_MODE_SLAVE 0x00000040
-#define IXP2400_PORT_TX_MODE_MASTER 0x00000000
-#define IXP2400_PORT_TX_MODE_POS_PHY 0x00000010
-#define IXP2400_PORT_TX_MODE_UTOPIA 0x00000000
-#define IXP2400_PORT_TX_MODE_EVEN_PARITY 0x0000000c
-#define IXP2400_PORT_TX_MODE_ODD_PARITY 0x00000008
-#define IXP2400_PORT_TX_MODE_NO_PARITY 0x00000000
-#define IXP2400_PORT_TX_MODE_UTOPIA_BIG_CELLS 0x00000002
-#define IXP2400_PORT_TX_MODE_2_CYCLE_DECODE 0x00000001
-#define IXP2400_PORT_TX_MODE_1_CYCLE_DECODE 0x00000000
-
-
-#endif
+++ /dev/null
-/*
- * RX ucode for the Intel IXP2400 in POS-PHY mode.
- * Copyright (C) 2004, 2005 Lennert Buytenhek
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Assumptions made in this code:
- * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
- * only one full element list is used. This includes, for example,
- * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This
- * is not an exhaustive list.)
- * - The RBUF uses 64-byte mpackets.
- * - RX descriptors reside in SRAM, and have the following format:
- * struct rx_desc
- * {
- * // to uengine
- * u32 buf_phys_addr;
- * u32 buf_length;
- *
- * // from uengine
- * u32 channel;
- * u32 pkt_length;
- * };
- * - Packet data resides in DRAM.
- * - Packet buffer addresses are 8-byte aligned.
- * - Scratch ring 0 is rx_pending.
- * - Scratch ring 1 is rx_done, and has status condition 'full'.
- * - The host triggers rx_done flush and rx_pending refill on seeing INTA.
- * - This code is run on all eight threads of the microengine it runs on.
- *
- * Local memory is used for per-channel RX state.
- */
-
-#define RX_THREAD_FREELIST_0 0x0030
-#define RBUF_ELEMENT_DONE 0x0044
-
-#define CHANNEL_FLAGS *l$index0[0]
-#define CHANNEL_FLAG_RECEIVING 1
-#define PACKET_LENGTH *l$index0[1]
-#define PACKET_CHECKSUM *l$index0[2]
-#define BUFFER_HANDLE *l$index0[3]
-#define BUFFER_START *l$index0[4]
-#define BUFFER_LENGTH *l$index0[5]
-
-#define CHANNEL_STATE_SIZE 24 // in bytes
-#define CHANNEL_STATE_SHIFT 5 // ceil(log2(state size))
-
-
- .sig volatile sig1
- .sig volatile sig2
- .sig volatile sig3
-
- .sig mpacket_arrived
- .reg add_to_rx_freelist
- .reg read $rsw0, $rsw1
- .xfer_order $rsw0 $rsw1
-
- .reg zero
-
- /*
- * Initialise add_to_rx_freelist.
- */
- .begin
- .reg temp
- .reg temp2
-
- immed[add_to_rx_freelist, RX_THREAD_FREELIST_0]
- immed_w1[add_to_rx_freelist, (&$rsw0 | (&mpacket_arrived << 12))]
-
- local_csr_rd[ACTIVE_CTX_STS]
- immed[temp, 0]
- alu[temp2, temp, and, 0x1f]
- alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<20]
- alu[temp2, temp, and, 0x80]
- alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<18]
- .end
-
- immed[zero, 0]
-
- /*
- * Skip context 0 initialisation?
- */
- .begin
- br!=ctx[0, mpacket_receive_loop#]
- .end
-
- /*
- * Initialise local memory.
- */
- .begin
- .reg addr
- .reg temp
-
- immed[temp, 0]
- init_local_mem_loop#:
- alu_shf[addr, --, b, temp, <<CHANNEL_STATE_SHIFT]
- local_csr_wr[ACTIVE_LM_ADDR_0, addr]
- nop
- nop
- nop
-
- immed[CHANNEL_FLAGS, 0]
-
- alu[temp, temp, +, 1]
- alu[--, temp, and, 0x20]
- beq[init_local_mem_loop#]
- .end
-
- /*
- * Initialise signal pipeline.
- */
- .begin
- local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
- .set_sig sig1
-
- local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
- .set_sig sig2
-
- local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
- .set_sig sig3
- .end
-
-mpacket_receive_loop#:
- /*
- * Synchronise and wait for mpacket.
- */
- .begin
- ctx_arb[sig1]
- local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]
-
- msf[fast_wr, --, add_to_rx_freelist, 0]
- .set_sig mpacket_arrived
- ctx_arb[mpacket_arrived]
- .set $rsw0 $rsw1
- .end
-
- /*
- * We halt if we see {inbparerr,parerr,null,soperror}.
- */
- .begin
- alu_shf[--, 0x1b, and, $rsw0, >>8]
- bne[abort_rswerr#]
- .end
-
- /*
- * Point local memory pointer to this channel's state area.
- */
- .begin
- .reg chanaddr
-
- alu[chanaddr, $rsw0, and, 0x1f]
- alu_shf[chanaddr, --, b, chanaddr, <<CHANNEL_STATE_SHIFT]
- local_csr_wr[ACTIVE_LM_ADDR_0, chanaddr]
- nop
- nop
- nop
- .end
-
- /*
- * Check whether we received a SOP mpacket while we were already
- * working on a packet, or a non-SOP mpacket while there was no
- * packet pending. (SOP == RECEIVING -> abort) If everything's
- * okay, update the RECEIVING flag to reflect our new state.
- */
- .begin
- .reg temp
- .reg eop
-
- #if CHANNEL_FLAG_RECEIVING != 1
- #error CHANNEL_FLAG_RECEIVING is not 1
- #endif
-
- alu_shf[temp, 1, and, $rsw0, >>15]
- alu[temp, temp, xor, CHANNEL_FLAGS]
- alu[--, temp, and, CHANNEL_FLAG_RECEIVING]
- beq[abort_proterr#]
-
- alu_shf[eop, 1, and, $rsw0, >>14]
- alu[CHANNEL_FLAGS, temp, xor, eop]
- .end
-
- /*
- * Copy the mpacket into the right spot, and in case of EOP,
- * write back the descriptor and pass the packet on.
- */
- .begin
- .reg buffer_offset
- .reg _packet_length
- .reg _packet_checksum
- .reg _buffer_handle
- .reg _buffer_start
- .reg _buffer_length
-
- /*
- * Determine buffer_offset, _packet_length and
- * _packet_checksum.
- */
- .begin
- .reg temp
-
- alu[--, 1, and, $rsw0, >>15]
- beq[not_sop#]
-
- immed[PACKET_LENGTH, 0]
- immed[PACKET_CHECKSUM, 0]
-
- not_sop#:
- alu[buffer_offset, --, b, PACKET_LENGTH]
- alu_shf[temp, 0xff, and, $rsw0, >>16]
- alu[_packet_length, buffer_offset, +, temp]
- alu[PACKET_LENGTH, --, b, _packet_length]
-
- immed[temp, 0xffff]
- alu[temp, $rsw1, and, temp]
- alu[_packet_checksum, PACKET_CHECKSUM, +, temp]
- alu[PACKET_CHECKSUM, --, b, _packet_checksum]
- .end
-
- /*
- * Allocate buffer in case of SOP.
- */
- .begin
- .reg temp
-
- alu[temp, 1, and, $rsw0, >>15]
- beq[skip_buffer_alloc#]
-
- .begin
- .sig zzz
- .reg read $stemp $stemp2
- .xfer_order $stemp $stemp2
-
- rx_nobufs#:
- scratch[get, $stemp, zero, 0, 1], ctx_swap[zzz]
- alu[_buffer_handle, --, b, $stemp]
- beq[rx_nobufs#]
-
- sram[read, $stemp, _buffer_handle, 0, 2],
- ctx_swap[zzz]
- alu[_buffer_start, --, b, $stemp]
- alu[_buffer_length, --, b, $stemp2]
- .end
-
- skip_buffer_alloc#:
- .end
-
- /*
- * Resynchronise.
- */
- .begin
- ctx_arb[sig2]
- local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
- .end
-
- /*
- * Synchronise buffer state.
- */
- .begin
- .reg temp
-
- alu[temp, 1, and, $rsw0, >>15]
- beq[copy_from_local_mem#]
-
- alu[BUFFER_HANDLE, --, b, _buffer_handle]
- alu[BUFFER_START, --, b, _buffer_start]
- alu[BUFFER_LENGTH, --, b, _buffer_length]
- br[sync_state_done#]
-
- copy_from_local_mem#:
- alu[_buffer_handle, --, b, BUFFER_HANDLE]
- alu[_buffer_start, --, b, BUFFER_START]
- alu[_buffer_length, --, b, BUFFER_LENGTH]
-
- sync_state_done#:
- .end
-
-#if 0
- /*
- * Debug buffer state management.
- */
- .begin
- .reg temp
-
- alu[temp, 1, and, $rsw0, >>14]
- beq[no_poison#]
- immed[BUFFER_HANDLE, 0xdead]
- immed[BUFFER_START, 0xdead]
- immed[BUFFER_LENGTH, 0xdead]
- no_poison#:
-
- immed[temp, 0xdead]
- alu[--, _buffer_handle, -, temp]
- beq[state_corrupted#]
- alu[--, _buffer_start, -, temp]
- beq[state_corrupted#]
- alu[--, _buffer_length, -, temp]
- beq[state_corrupted#]
- .end
-#endif
-
- /*
- * Check buffer length.
- */
- .begin
- alu[--, _buffer_length, -, _packet_length]
- blo[buffer_overflow#]
- .end
-
- /*
- * Copy the mpacket and give back the RBUF element.
- */
- .begin
- .reg element
- .reg xfer_size
- .reg temp
- .sig copy_sig
-
- alu_shf[element, 0x7f, and, $rsw0, >>24]
- alu_shf[xfer_size, 0xff, and, $rsw0, >>16]
-
- alu[xfer_size, xfer_size, -, 1]
- alu_shf[xfer_size, 0x10, or, xfer_size, >>3]
- alu_shf[temp, 0x10, or, xfer_size, <<21]
- alu_shf[temp, temp, or, element, <<11]
- alu_shf[--, temp, or, 1, <<18]
-
- dram[rbuf_rd, --, _buffer_start, buffer_offset, max_8],
- indirect_ref, sig_done[copy_sig]
- ctx_arb[copy_sig]
-
- alu[temp, RBUF_ELEMENT_DONE, or, element, <<16]
- msf[fast_wr, --, temp, 0]
- .end
-
- /*
- * If EOP, write back the packet descriptor.
- */
- .begin
- .reg write $stemp $stemp2
- .xfer_order $stemp $stemp2
- .sig zzz
-
- alu_shf[--, 1, and, $rsw0, >>14]
- beq[no_writeback#]
-
- alu[$stemp, $rsw0, and, 0x1f]
- alu[$stemp2, --, b, _packet_length]
- sram[write, $stemp, _buffer_handle, 8, 2], ctx_swap[zzz]
-
- no_writeback#:
- .end
-
- /*
- * Resynchronise.
- */
- .begin
- ctx_arb[sig3]
- local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
- .end
-
- /*
- * If EOP, put the buffer back onto the scratch ring.
- */
- .begin
- .reg write $stemp
- .sig zzz
-
- br_inp_state[SCR_Ring1_Status, rx_done_ring_overflow#]
-
- alu_shf[--, 1, and, $rsw0, >>14]
- beq[mpacket_receive_loop#]
-
- alu[--, 1, and, $rsw0, >>10]
- bne[rxerr#]
-
- alu[$stemp, --, b, _buffer_handle]
- scratch[put, $stemp, zero, 4, 1], ctx_swap[zzz]
- cap[fast_wr, 0, XSCALE_INT_A]
- br[mpacket_receive_loop#]
-
- rxerr#:
- alu[$stemp, --, b, _buffer_handle]
- scratch[put, $stemp, zero, 0, 1], ctx_swap[zzz]
- br[mpacket_receive_loop#]
- .end
- .end
-
-
-abort_rswerr#:
- halt
-
-abort_proterr#:
- halt
-
-state_corrupted#:
- halt
-
-buffer_overflow#:
- halt
-
-rx_done_ring_overflow#:
- halt
-
-
+++ /dev/null
-static struct ixp2000_uengine_code ixp2400_rx =
-{
- .cpu_model_bitmask = 0x000003fe,
- .cpu_min_revision = 0,
- .cpu_max_revision = 255,
-
- .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS |
- IXP2000_UENGINE_PRN_UPDATE_EVERY |
- IXP2000_UENGINE_NN_FROM_PREVIOUS |
- IXP2000_UENGINE_ASSERT_EMPTY_AT_0 |
- IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT |
- IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT,
-
- .initial_reg_values = (struct ixp2000_reg_value []) {
- { -1, -1 }
- },
-
- .num_insns = 109,
- .insns = (u8 []) {
- 0xf0, 0x00, 0x0c, 0xc0, 0x05,
- 0xf4, 0x44, 0x0c, 0x00, 0x05,
- 0xfc, 0x04, 0x4c, 0x00, 0x00,
- 0xf0, 0x00, 0x00, 0x3b, 0x00,
- 0xb4, 0x40, 0xf0, 0x3b, 0x1f,
- 0x8a, 0xc0, 0x50, 0x3e, 0x05,
- 0xb4, 0x40, 0xf0, 0x3b, 0x80,
- 0x9a, 0xe0, 0x00, 0x3e, 0x05,
- 0xf0, 0x00, 0x00, 0x07, 0x00,
- 0xd8, 0x05, 0xc0, 0x00, 0x11,
- 0xf0, 0x00, 0x00, 0x0f, 0x00,
- 0x91, 0xb0, 0x20, 0x0e, 0x00,
- 0xfc, 0x06, 0x60, 0x0b, 0x00,
- 0xf0, 0x00, 0x0c, 0x03, 0x00,
- 0xf0, 0x00, 0x0c, 0x03, 0x00,
- 0xf0, 0x00, 0x0c, 0x03, 0x00,
- 0xf0, 0x00, 0x0c, 0x02, 0x00,
- 0xb0, 0xc0, 0x30, 0x0f, 0x01,
- 0xa4, 0x70, 0x00, 0x0f, 0x20,
- 0xd8, 0x02, 0xc0, 0x01, 0x00,
- 0xfc, 0x10, 0xac, 0x23, 0x08,
- 0xfc, 0x10, 0xac, 0x43, 0x10,
- 0xfc, 0x10, 0xac, 0x63, 0x18,
- 0xe0, 0x00, 0x00, 0x00, 0x02,
- 0xfc, 0x10, 0xae, 0x23, 0x88,
- 0x3d, 0x00, 0x04, 0x03, 0x20,
- 0xe0, 0x00, 0x00, 0x00, 0x10,
- 0x84, 0x82, 0x02, 0x01, 0x3b,
- 0xd8, 0x1a, 0x00, 0x01, 0x01,
- 0xb4, 0x00, 0x8c, 0x7d, 0x80,
- 0x91, 0xb0, 0x80, 0x22, 0x00,
- 0xfc, 0x06, 0x60, 0x23, 0x00,
- 0xf0, 0x00, 0x0c, 0x03, 0x00,
- 0xf0, 0x00, 0x0c, 0x03, 0x00,
- 0xf0, 0x00, 0x0c, 0x03, 0x00,
- 0x94, 0xf0, 0x92, 0x01, 0x21,
- 0xac, 0x40, 0x60, 0x26, 0x00,
- 0xa4, 0x30, 0x0c, 0x04, 0x06,
- 0xd8, 0x1a, 0x40, 0x01, 0x00,
- 0x94, 0xe0, 0xa2, 0x01, 0x21,
- 0xac, 0x20, 0x00, 0x28, 0x06,
- 0x84, 0xf2, 0x02, 0x01, 0x21,
- 0xd8, 0x0b, 0x40, 0x01, 0x00,
- 0xf0, 0x00, 0x0c, 0x02, 0x01,
- 0xf0, 0x00, 0x0c, 0x02, 0x02,
- 0xa0, 0x00, 0x08, 0x04, 0x00,
- 0x95, 0x00, 0xc6, 0x01, 0xff,
- 0xa0, 0x80, 0x10, 0x30, 0x00,
- 0xa0, 0x60, 0x1c, 0x00, 0x01,
- 0xf0, 0x0f, 0xf0, 0x33, 0xff,
- 0xb4, 0x00, 0xc0, 0x31, 0x81,
- 0xb0, 0x80, 0xb0, 0x32, 0x02,
- 0xa0, 0x20, 0x20, 0x2c, 0x00,
- 0x94, 0xf0, 0xd2, 0x01, 0x21,
- 0xd8, 0x0f, 0x40, 0x01, 0x00,
- 0x19, 0x40, 0x10, 0x04, 0x20,
- 0xa0, 0x00, 0x26, 0x04, 0x00,
- 0xd8, 0x0d, 0xc0, 0x01, 0x00,
- 0x00, 0x42, 0x10, 0x80, 0x02,
- 0xb0, 0x00, 0x46, 0x04, 0x00,
- 0xb0, 0x00, 0x56, 0x08, 0x00,
- 0xe0, 0x00, 0x00, 0x00, 0x04,
- 0xfc, 0x10, 0xae, 0x43, 0x90,
- 0x84, 0xf0, 0x32, 0x01, 0x21,
- 0xd8, 0x11, 0x40, 0x01, 0x00,
- 0xa0, 0x60, 0x3c, 0x00, 0x02,
- 0xa0, 0x20, 0x40, 0x10, 0x00,
- 0xa0, 0x20, 0x50, 0x14, 0x00,
- 0xd8, 0x12, 0x00, 0x00, 0x18,
- 0xa0, 0x00, 0x28, 0x0c, 0x00,
- 0xb0, 0x00, 0x48, 0x10, 0x00,
- 0xb0, 0x00, 0x58, 0x14, 0x00,
- 0xaa, 0xf0, 0x00, 0x14, 0x01,
- 0xd8, 0x1a, 0xc0, 0x01, 0x05,
- 0x85, 0x80, 0x42, 0x01, 0xff,
- 0x95, 0x00, 0x66, 0x01, 0xff,
- 0xba, 0xc0, 0x60, 0x1b, 0x01,
- 0x9a, 0x30, 0x60, 0x19, 0x30,
- 0x9a, 0xb0, 0x70, 0x1a, 0x30,
- 0x9b, 0x50, 0x78, 0x1e, 0x04,
- 0x8a, 0xe2, 0x08, 0x1e, 0x21,
- 0x6a, 0x4e, 0x00, 0x13, 0x00,
- 0xe0, 0x00, 0x00, 0x00, 0x30,
- 0x9b, 0x00, 0x7a, 0x92, 0x04,
- 0x3d, 0x00, 0x04, 0x1f, 0x20,
- 0x84, 0xe2, 0x02, 0x01, 0x21,
- 0xd8, 0x16, 0x80, 0x01, 0x00,
- 0xa4, 0x18, 0x0c, 0x7d, 0x80,
- 0xa0, 0x58, 0x1c, 0x00, 0x01,
- 0x01, 0x42, 0x00, 0xa0, 0x02,
- 0xe0, 0x00, 0x00, 0x00, 0x08,
- 0xfc, 0x10, 0xae, 0x63, 0x98,
- 0xd8, 0x1b, 0x00, 0xc2, 0x14,
- 0x84, 0xe2, 0x02, 0x01, 0x21,
- 0xd8, 0x05, 0xc0, 0x01, 0x00,
- 0x84, 0xa2, 0x02, 0x01, 0x21,
- 0xd8, 0x19, 0x40, 0x01, 0x01,
- 0xa0, 0x58, 0x0c, 0x00, 0x02,
- 0x1a, 0x40, 0x00, 0x04, 0x24,
- 0x33, 0x00, 0x01, 0x2f, 0x20,
- 0xd8, 0x05, 0xc0, 0x00, 0x18,
- 0xa0, 0x58, 0x0c, 0x00, 0x02,
- 0x1a, 0x40, 0x00, 0x04, 0x20,
- 0xd8, 0x05, 0xc0, 0x00, 0x18,
- 0xe0, 0x00, 0x02, 0x00, 0x00,
- 0xe0, 0x00, 0x02, 0x00, 0x00,
- 0xe0, 0x00, 0x02, 0x00, 0x00,
- 0xe0, 0x00, 0x02, 0x00, 0x00,
- 0xe0, 0x00, 0x02, 0x00, 0x00,
- }
-};
+++ /dev/null
-/*
- * TX ucode for the Intel IXP2400 in POS-PHY mode.
- * Copyright (C) 2004, 2005 Lennert Buytenhek
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Assumptions made in this code:
- * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
- * only one TBUF partition is used. This includes, for example,
- * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This
- * is not an exhaustive list.)
- * - The TBUF uses 64-byte mpackets.
- * - TX descriptors reside in SRAM, and have the following format:
- * struct tx_desc
- * {
- * // to uengine
- * u32 buf_phys_addr;
- * u32 pkt_length;
- * u32 channel;
- * };
- * - Packet data resides in DRAM.
- * - Packet buffer addresses are 8-byte aligned.
- * - Scratch ring 2 is tx_pending.
- * - Scratch ring 3 is tx_done, and has status condition 'full'.
- * - This code is run on all eight threads of the microengine it runs on.
- */
-
-#define TX_SEQUENCE_0 0x0060
-#define TBUF_CTRL 0x1800
-
-#define PARTITION_SIZE 128
-#define PARTITION_THRESH 96
-
-
- .sig volatile sig1
- .sig volatile sig2
- .sig volatile sig3
-
- .reg @old_tx_seq_0
- .reg @mpkts_in_flight
- .reg @next_tbuf_mpacket
-
- .reg @buffer_handle
- .reg @buffer_start
- .reg @packet_length
- .reg @channel
- .reg @packet_offset
-
- .reg zero
-
- immed[zero, 0]
-
- /*
- * Skip context 0 initialisation?
- */
- .begin
- br!=ctx[0, mpacket_tx_loop#]
- .end
-
- /*
- * Wait until all pending TBUF elements have been transmitted.
- */
- .begin
- .reg read $tx
- .sig zzz
-
- loop_empty#:
- msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
- alu_shf[--, --, b, $tx, >>31]
- beq[loop_empty#]
-
- alu[@old_tx_seq_0, --, b, $tx]
- .end
-
- immed[@mpkts_in_flight, 0]
- alu[@next_tbuf_mpacket, @old_tx_seq_0, and, (PARTITION_SIZE - 1)]
-
- immed[@buffer_handle, 0]
-
- /*
- * Initialise signal pipeline.
- */
- .begin
- local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
- .set_sig sig1
-
- local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
- .set_sig sig2
-
- local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
- .set_sig sig3
- .end
-
-mpacket_tx_loop#:
- .begin
- .reg tbuf_element_index
- .reg buffer_handle
- .reg sop_eop
- .reg packet_data
- .reg channel
- .reg mpacket_size
-
- /*
- * If there is no packet currently being transmitted,
- * dequeue the next TX descriptor, and fetch the buffer
- * address, packet length and destination channel number.
- */
- .begin
- .reg read $stemp $stemp2 $stemp3
- .xfer_order $stemp $stemp2 $stemp3
- .sig zzz
-
- ctx_arb[sig1]
-
- alu[--, --, b, @buffer_handle]
- bne[already_got_packet#]
-
- tx_nobufs#:
- scratch[get, $stemp, zero, 8, 1], ctx_swap[zzz]
- alu[@buffer_handle, --, b, $stemp]
- beq[tx_nobufs#]
-
- sram[read, $stemp, $stemp, 0, 3], ctx_swap[zzz]
- alu[@buffer_start, --, b, $stemp]
- alu[@packet_length, --, b, $stemp2]
- beq[zero_byte_packet#]
- alu[@channel, --, b, $stemp3]
- immed[@packet_offset, 0]
-
- already_got_packet#:
- local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]
- .end
-
- /*
- * Determine tbuf element index, SOP/EOP flags, mpacket
- * offset and mpacket size and cache buffer_handle and
- * channel number.
- */
- .begin
- alu[tbuf_element_index, --, b, @next_tbuf_mpacket]
- alu[@next_tbuf_mpacket, @next_tbuf_mpacket, +, 1]
- alu[@next_tbuf_mpacket, @next_tbuf_mpacket, and,
- (PARTITION_SIZE - 1)]
-
- alu[buffer_handle, --, b, @buffer_handle]
- immed[@buffer_handle, 0]
-
- immed[sop_eop, 1]
-
- alu[packet_data, --, b, @packet_offset]
- bne[no_sop#]
- alu[sop_eop, sop_eop, or, 2]
- no_sop#:
- alu[packet_data, packet_data, +, @buffer_start]
-
- alu[channel, --, b, @channel]
-
- alu[mpacket_size, @packet_length, -, @packet_offset]
- alu[--, 64, -, mpacket_size]
- bhs[eop#]
- alu[@buffer_handle, --, b, buffer_handle]
- immed[mpacket_size, 64]
- alu[sop_eop, sop_eop, and, 2]
- eop#:
-
- alu[@packet_offset, @packet_offset, +, mpacket_size]
- .end
-
- /*
- * Wait until there's enough space in the TBUF.
- */
- .begin
- .reg read $tx
- .reg temp
- .sig zzz
-
- ctx_arb[sig2]
-
- br[test_space#]
-
- loop_space#:
- msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
-
- alu[temp, $tx, -, @old_tx_seq_0]
- alu[temp, temp, and, 0xff]
- alu[@mpkts_in_flight, @mpkts_in_flight, -, temp]
-
- alu[@old_tx_seq_0, --, b, $tx]
-
- test_space#:
- alu[--, PARTITION_THRESH, -, @mpkts_in_flight]
- blo[loop_space#]
-
- alu[@mpkts_in_flight, @mpkts_in_flight, +, 1]
-
- local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
- .end
-
- /*
- * Copy the packet data to the TBUF.
- */
- .begin
- .reg temp
- .sig copy_sig
-
- alu[temp, mpacket_size, -, 1]
- alu_shf[temp, 0x10, or, temp, >>3]
- alu_shf[temp, 0x10, or, temp, <<21]
- alu_shf[temp, temp, or, tbuf_element_index, <<11]
- alu_shf[--, temp, or, 1, <<18]
-
- dram[tbuf_wr, --, packet_data, 0, max_8],
- indirect_ref, sig_done[copy_sig]
- ctx_arb[copy_sig]
- .end
-
- /*
- * Mark TBUF element as ready-to-be-transmitted.
- */
- .begin
- .reg write $tsw $tsw2
- .xfer_order $tsw $tsw2
- .reg temp
- .sig zzz
-
- alu_shf[temp, channel, or, mpacket_size, <<24]
- alu_shf[$tsw, temp, or, sop_eop, <<8]
- immed[$tsw2, 0]
-
- immed[temp, TBUF_CTRL]
- alu_shf[temp, temp, or, tbuf_element_index, <<3]
- msf[write, $tsw, temp, 0, 2], ctx_swap[zzz]
- .end
-
- /*
- * Resynchronise.
- */
- .begin
- ctx_arb[sig3]
- local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
- .end
-
- /*
- * If this was an EOP mpacket, recycle the TX buffer
- * and signal the host.
- */
- .begin
- .reg write $stemp
- .sig zzz
-
- alu[--, sop_eop, and, 1]
- beq[mpacket_tx_loop#]
-
- tx_done_ring_full#:
- br_inp_state[SCR_Ring3_Status, tx_done_ring_full#]
-
- alu[$stemp, --, b, buffer_handle]
- scratch[put, $stemp, zero, 12, 1], ctx_swap[zzz]
- cap[fast_wr, 0, XSCALE_INT_A]
- br[mpacket_tx_loop#]
- .end
- .end
-
-
-zero_byte_packet#:
- halt
-
-
+++ /dev/null
-static struct ixp2000_uengine_code ixp2400_tx =
-{
- .cpu_model_bitmask = 0x000003fe,
- .cpu_min_revision = 0,
- .cpu_max_revision = 255,
-
- .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS |
- IXP2000_UENGINE_PRN_UPDATE_EVERY |
- IXP2000_UENGINE_NN_FROM_PREVIOUS |
- IXP2000_UENGINE_ASSERT_EMPTY_AT_0 |
- IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT |
- IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT,
-
- .initial_reg_values = (struct ixp2000_reg_value []) {
- { -1, -1 }
- },
-
- .num_insns = 77,
- .insns = (u8 []) {
- 0xf0, 0x00, 0x00, 0x07, 0x00,
- 0xd8, 0x03, 0x00, 0x00, 0x11,
- 0x3c, 0x40, 0x00, 0x04, 0xe0,
- 0x81, 0xf2, 0x02, 0x01, 0x00,
- 0xd8, 0x00, 0x80, 0x01, 0x00,
- 0xb0, 0x08, 0x06, 0x00, 0x00,
- 0xf0, 0x00, 0x0c, 0x00, 0x80,
- 0xb4, 0x49, 0x02, 0x03, 0x7f,
- 0xf0, 0x00, 0x02, 0x83, 0x00,
- 0xfc, 0x10, 0xac, 0x23, 0x08,
- 0xfc, 0x10, 0xac, 0x43, 0x10,
- 0xfc, 0x10, 0xac, 0x63, 0x18,
- 0xe0, 0x00, 0x00, 0x00, 0x02,
- 0xa0, 0x30, 0x02, 0x80, 0x00,
- 0xd8, 0x06, 0x00, 0x01, 0x01,
- 0x19, 0x40, 0x00, 0x04, 0x28,
- 0xb0, 0x0a, 0x06, 0x00, 0x00,
- 0xd8, 0x03, 0xc0, 0x01, 0x00,
- 0x00, 0x44, 0x00, 0x80, 0x80,
- 0xa0, 0x09, 0x06, 0x00, 0x00,
- 0xb0, 0x0b, 0x06, 0x04, 0x00,
- 0xd8, 0x13, 0x00, 0x01, 0x00,
- 0xb0, 0x0c, 0x06, 0x08, 0x00,
- 0xf0, 0x00, 0x0c, 0x00, 0xa0,
- 0xfc, 0x10, 0xae, 0x23, 0x88,
- 0xa0, 0x00, 0x12, 0x40, 0x00,
- 0xb0, 0xc9, 0x02, 0x43, 0x01,
- 0xb4, 0x49, 0x02, 0x43, 0x7f,
- 0xb0, 0x00, 0x22, 0x80, 0x00,
- 0xf0, 0x00, 0x02, 0x83, 0x00,
- 0xf0, 0x00, 0x0c, 0x04, 0x02,
- 0xb0, 0x40, 0x6c, 0x00, 0xa0,
- 0xd8, 0x08, 0x80, 0x01, 0x01,
- 0xaa, 0x00, 0x2c, 0x08, 0x02,
- 0xa0, 0xc0, 0x30, 0x18, 0x90,
- 0xa0, 0x00, 0x43, 0x00, 0x00,
- 0xba, 0xc0, 0x32, 0xc0, 0xa0,
- 0xaa, 0xb0, 0x00, 0x0f, 0x40,
- 0xd8, 0x0a, 0x80, 0x01, 0x04,
- 0xb0, 0x0a, 0x00, 0x08, 0x00,
- 0xf0, 0x00, 0x00, 0x0f, 0x40,
- 0xa4, 0x00, 0x2c, 0x08, 0x02,
- 0xa0, 0x8a, 0x00, 0x0c, 0xa0,
- 0xe0, 0x00, 0x00, 0x00, 0x04,
- 0xd8, 0x0c, 0x80, 0x00, 0x18,
- 0x3c, 0x40, 0x00, 0x04, 0xe0,
- 0xba, 0x80, 0x42, 0x01, 0x80,
- 0xb4, 0x40, 0x40, 0x13, 0xff,
- 0xaa, 0x88, 0x00, 0x10, 0x80,
- 0xb0, 0x08, 0x06, 0x00, 0x00,
- 0xaa, 0xf0, 0x0d, 0x80, 0x80,
- 0xd8, 0x0b, 0x40, 0x01, 0x05,
- 0xa0, 0x88, 0x0c, 0x04, 0x80,
- 0xfc, 0x10, 0xae, 0x43, 0x90,
- 0xba, 0xc0, 0x50, 0x0f, 0x01,
- 0x9a, 0x30, 0x50, 0x15, 0x30,
- 0x9a, 0xb0, 0x50, 0x16, 0x30,
- 0x9b, 0x50, 0x58, 0x16, 0x01,
- 0x8a, 0xe2, 0x08, 0x16, 0x21,
- 0x6b, 0x4e, 0x00, 0x83, 0x03,
- 0xe0, 0x00, 0x00, 0x00, 0x30,
- 0x9a, 0x80, 0x70, 0x0e, 0x04,
- 0x8b, 0x88, 0x08, 0x1e, 0x02,
- 0xf0, 0x00, 0x0c, 0x01, 0x81,
- 0xf0, 0x01, 0x80, 0x1f, 0x00,
- 0x9b, 0xd0, 0x78, 0x1e, 0x01,
- 0x3d, 0x42, 0x00, 0x1c, 0x20,
- 0xe0, 0x00, 0x00, 0x00, 0x08,
- 0xfc, 0x10, 0xae, 0x63, 0x98,
- 0xa4, 0x30, 0x0c, 0x04, 0x02,
- 0xd8, 0x03, 0x00, 0x01, 0x00,
- 0xd8, 0x11, 0xc1, 0x42, 0x14,
- 0xa0, 0x18, 0x00, 0x08, 0x00,
- 0x1a, 0x40, 0x00, 0x04, 0x2c,
- 0x33, 0x00, 0x01, 0x2f, 0x20,
- 0xd8, 0x03, 0x00, 0x00, 0x18,
- 0xe0, 0x00, 0x02, 0x00, 0x00,
- }
-};
+++ /dev/null
-/*
- * IXP2000 MSF network device driver
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/gfp.h>
-#include <asm/hardware/uengine.h>
-#include <asm/io.h>
-#include "ixp2400_rx.ucode"
-#include "ixp2400_tx.ucode"
-#include "ixpdev_priv.h"
-#include "ixpdev.h"
-#include "pm3386.h"
-
-#define DRV_MODULE_VERSION "0.2"
-
-static int nds_count;
-static struct net_device **nds;
-static int nds_open;
-static void (*set_port_admin_status)(int port, int up);
-
-static struct ixpdev_rx_desc * const rx_desc =
- (struct ixpdev_rx_desc *)(IXP2000_SRAM0_VIRT_BASE + RX_BUF_DESC_BASE);
-static struct ixpdev_tx_desc * const tx_desc =
- (struct ixpdev_tx_desc *)(IXP2000_SRAM0_VIRT_BASE + TX_BUF_DESC_BASE);
-static int tx_pointer;
-
-
-static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct ixpdev_priv *ip = netdev_priv(dev);
- struct ixpdev_tx_desc *desc;
- int entry;
- unsigned long flags;
-
- if (unlikely(skb->len > PAGE_SIZE)) {
- /* @@@ Count drops. */
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
- }
-
- entry = tx_pointer;
- tx_pointer = (tx_pointer + 1) % TX_BUF_COUNT;
-
- desc = tx_desc + entry;
- desc->pkt_length = skb->len;
- desc->channel = ip->channel;
-
- skb_copy_and_csum_dev(skb, phys_to_virt(desc->buf_addr));
- dev_kfree_skb(skb);
-
- ixp2000_reg_write(RING_TX_PENDING,
- TX_BUF_DESC_BASE + (entry * sizeof(struct ixpdev_tx_desc)));
-
- local_irq_save(flags);
- ip->tx_queue_entries++;
- if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN)
- netif_stop_queue(dev);
- local_irq_restore(flags);
-
- return NETDEV_TX_OK;
-}
-
-
-static int ixpdev_rx(struct net_device *dev, int processed, int budget)
-{
- while (processed < budget) {
- struct ixpdev_rx_desc *desc;
- struct sk_buff *skb;
- void *buf;
- u32 _desc;
-
- _desc = ixp2000_reg_read(RING_RX_DONE);
- if (_desc == 0)
- return 0;
-
- desc = rx_desc +
- ((_desc - RX_BUF_DESC_BASE) / sizeof(struct ixpdev_rx_desc));
- buf = phys_to_virt(desc->buf_addr);
-
- if (desc->pkt_length < 4 || desc->pkt_length > PAGE_SIZE) {
- printk(KERN_ERR "ixp2000: rx err, length %d\n",
- desc->pkt_length);
- goto err;
- }
-
- if (desc->channel < 0 || desc->channel >= nds_count) {
- printk(KERN_ERR "ixp2000: rx err, channel %d\n",
- desc->channel);
- goto err;
- }
-
- /* @@@ Make FCS stripping configurable. */
- desc->pkt_length -= 4;
-
- if (unlikely(!netif_running(nds[desc->channel])))
- goto err;
-
- skb = netdev_alloc_skb_ip_align(dev, desc->pkt_length);
- if (likely(skb != NULL)) {
- skb_copy_to_linear_data(skb, buf, desc->pkt_length);
- skb_put(skb, desc->pkt_length);
- skb->protocol = eth_type_trans(skb, nds[desc->channel]);
-
- netif_receive_skb(skb);
- }
-
-err:
- ixp2000_reg_write(RING_RX_PENDING, _desc);
- processed++;
- }
-
- return processed;
-}
-
-/* dev always points to nds[0]. */
-static int ixpdev_poll(struct napi_struct *napi, int budget)
-{
- struct ixpdev_priv *ip = container_of(napi, struct ixpdev_priv, napi);
- struct net_device *dev = ip->dev;
- int rx;
-
- rx = 0;
- do {
- ixp2000_reg_write(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0x00ff);
-
- rx = ixpdev_rx(dev, rx, budget);
- if (rx >= budget)
- break;
- } while (ixp2000_reg_read(IXP2000_IRQ_THD_RAW_STATUS_A_0) & 0x00ff);
-
- napi_complete(napi);
- ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0x00ff);
-
- return rx;
-}
-
-static void ixpdev_tx_complete(void)
-{
- int channel;
- u32 wake;
-
- wake = 0;
- while (1) {
- struct ixpdev_priv *ip;
- u32 desc;
- int entry;
-
- desc = ixp2000_reg_read(RING_TX_DONE);
- if (desc == 0)
- break;
-
- /* @@@ Check whether entries come back in order. */
- entry = (desc - TX_BUF_DESC_BASE) / sizeof(struct ixpdev_tx_desc);
- channel = tx_desc[entry].channel;
-
- if (channel < 0 || channel >= nds_count) {
- printk(KERN_ERR "ixp2000: txcomp channel index "
- "out of bounds (%d, %.8i, %d)\n",
- channel, (unsigned int)desc, entry);
- continue;
- }
-
- ip = netdev_priv(nds[channel]);
- if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN)
- wake |= 1 << channel;
- ip->tx_queue_entries--;
- }
-
- for (channel = 0; wake != 0; channel++) {
- if (wake & (1 << channel)) {
- netif_wake_queue(nds[channel]);
- wake &= ~(1 << channel);
- }
- }
-}
-
-static irqreturn_t ixpdev_interrupt(int irq, void *dev_id)
-{
- u32 status;
-
- status = ixp2000_reg_read(IXP2000_IRQ_THD_STATUS_A_0);
- if (status == 0)
- return IRQ_NONE;
-
- /*
- * Any of the eight receive units signaled RX?
- */
- if (status & 0x00ff) {
- struct net_device *dev = nds[0];
- struct ixpdev_priv *ip = netdev_priv(dev);
-
- ixp2000_reg_wrb(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0x00ff);
- if (likely(napi_schedule_prep(&ip->napi))) {
- __napi_schedule(&ip->napi);
- } else {
- printk(KERN_CRIT "ixp2000: irq while polling!!\n");
- }
- }
-
- /*
- * Any of the eight transmit units signaled TXdone?
- */
- if (status & 0xff00) {
- ixp2000_reg_wrb(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0xff00);
- ixpdev_tx_complete();
- }
-
- return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void ixpdev_poll_controller(struct net_device *dev)
-{
- disable_irq(IRQ_IXP2000_THDA0);
- ixpdev_interrupt(IRQ_IXP2000_THDA0, dev);
- enable_irq(IRQ_IXP2000_THDA0);
-}
-#endif
-
-static int ixpdev_open(struct net_device *dev)
-{
- struct ixpdev_priv *ip = netdev_priv(dev);
- int err;
-
- napi_enable(&ip->napi);
- if (!nds_open++) {
- err = request_irq(IRQ_IXP2000_THDA0, ixpdev_interrupt,
- IRQF_SHARED, "ixp2000_eth", nds);
- if (err) {
- nds_open--;
- napi_disable(&ip->napi);
- return err;
- }
-
- ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0xffff);
- }
-
- set_port_admin_status(ip->channel, 1);
- netif_start_queue(dev);
-
- return 0;
-}
-
-static int ixpdev_close(struct net_device *dev)
-{
- struct ixpdev_priv *ip = netdev_priv(dev);
-
- netif_stop_queue(dev);
- napi_disable(&ip->napi);
- set_port_admin_status(ip->channel, 0);
-
- if (!--nds_open) {
- ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0xffff);
- free_irq(IRQ_IXP2000_THDA0, nds);
- }
-
- return 0;
-}
-
-static struct net_device_stats *ixpdev_get_stats(struct net_device *dev)
-{
- struct ixpdev_priv *ip = netdev_priv(dev);
-
- pm3386_get_stats(ip->channel, &(dev->stats));
-
- return &(dev->stats);
-}
-
-static const struct net_device_ops ixpdev_netdev_ops = {
- .ndo_open = ixpdev_open,
- .ndo_stop = ixpdev_close,
- .ndo_start_xmit = ixpdev_xmit,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_get_stats = ixpdev_get_stats,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ixpdev_poll_controller,
-#endif
-};
-
-struct net_device *ixpdev_alloc(int channel, int sizeof_priv)
-{
- struct net_device *dev;
- struct ixpdev_priv *ip;
-
- dev = alloc_etherdev(sizeof_priv);
- if (dev == NULL)
- return NULL;
-
- dev->netdev_ops = &ixpdev_netdev_ops;
-
- dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
-
- ip = netdev_priv(dev);
- ip->dev = dev;
- netif_napi_add(dev, &ip->napi, ixpdev_poll, 64);
- ip->channel = channel;
- ip->tx_queue_entries = 0;
-
- return dev;
-}
-
-int ixpdev_init(int __nds_count, struct net_device **__nds,
- void (*__set_port_admin_status)(int port, int up))
-{
- int i;
- int err;
-
- BUILD_BUG_ON(RX_BUF_COUNT > 192 || TX_BUF_COUNT > 192);
-
- printk(KERN_INFO "IXP2000 MSF ethernet driver %s\n", DRV_MODULE_VERSION);
-
- nds_count = __nds_count;
- nds = __nds;
- set_port_admin_status = __set_port_admin_status;
-
- for (i = 0; i < RX_BUF_COUNT; i++) {
- void *buf;
-
- buf = (void *)get_zeroed_page(GFP_KERNEL);
- if (buf == NULL) {
- err = -ENOMEM;
- while (--i >= 0)
- free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr));
- goto err_out;
- }
- rx_desc[i].buf_addr = virt_to_phys(buf);
- rx_desc[i].buf_length = PAGE_SIZE;
- }
-
- /* @@@ Maybe we shouldn't be preallocating TX buffers. */
- for (i = 0; i < TX_BUF_COUNT; i++) {
- void *buf;
-
- buf = (void *)get_zeroed_page(GFP_KERNEL);
- if (buf == NULL) {
- err = -ENOMEM;
- while (--i >= 0)
- free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr));
- goto err_free_rx;
- }
- tx_desc[i].buf_addr = virt_to_phys(buf);
- }
-
- /* 256 entries, ring status set means 'empty', base address 0x0000. */
- ixp2000_reg_write(RING_RX_PENDING_BASE, 0x44000000);
- ixp2000_reg_write(RING_RX_PENDING_HEAD, 0x00000000);
- ixp2000_reg_write(RING_RX_PENDING_TAIL, 0x00000000);
-
- /* 256 entries, ring status set means 'full', base address 0x0400. */
- ixp2000_reg_write(RING_RX_DONE_BASE, 0x40000400);
- ixp2000_reg_write(RING_RX_DONE_HEAD, 0x00000000);
- ixp2000_reg_write(RING_RX_DONE_TAIL, 0x00000000);
-
- for (i = 0; i < RX_BUF_COUNT; i++) {
- ixp2000_reg_write(RING_RX_PENDING,
- RX_BUF_DESC_BASE + (i * sizeof(struct ixpdev_rx_desc)));
- }
-
- ixp2000_uengine_load(0, &ixp2400_rx);
- ixp2000_uengine_start_contexts(0, 0xff);
-
- /* 256 entries, ring status set means 'empty', base address 0x0800. */
- ixp2000_reg_write(RING_TX_PENDING_BASE, 0x44000800);
- ixp2000_reg_write(RING_TX_PENDING_HEAD, 0x00000000);
- ixp2000_reg_write(RING_TX_PENDING_TAIL, 0x00000000);
-
- /* 256 entries, ring status set means 'full', base address 0x0c00. */
- ixp2000_reg_write(RING_TX_DONE_BASE, 0x40000c00);
- ixp2000_reg_write(RING_TX_DONE_HEAD, 0x00000000);
- ixp2000_reg_write(RING_TX_DONE_TAIL, 0x00000000);
-
- ixp2000_uengine_load(1, &ixp2400_tx);
- ixp2000_uengine_start_contexts(1, 0xff);
-
- for (i = 0; i < nds_count; i++) {
- err = register_netdev(nds[i]);
- if (err) {
- while (--i >= 0)
- unregister_netdev(nds[i]);
- goto err_free_tx;
- }
- }
-
- for (i = 0; i < nds_count; i++) {
- printk(KERN_INFO "%s: IXP2000 MSF ethernet (port %d), %pM.\n",
- nds[i]->name, i, nds[i]->dev_addr);
- }
-
- return 0;
-
-err_free_tx:
- for (i = 0; i < TX_BUF_COUNT; i++)
- free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr));
-
-err_free_rx:
- for (i = 0; i < RX_BUF_COUNT; i++)
- free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr));
-
-err_out:
- return err;
-}
-
-void ixpdev_deinit(void)
-{
- int i;
-
- /* @@@ Flush out pending packets. */
-
- for (i = 0; i < nds_count; i++)
- unregister_netdev(nds[i]);
-
- ixp2000_uengine_stop_contexts(1, 0xff);
- ixp2000_uengine_stop_contexts(0, 0xff);
- ixp2000_uengine_reset(0x3);
-
- for (i = 0; i < TX_BUF_COUNT; i++)
- free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr));
-
- for (i = 0; i < RX_BUF_COUNT; i++)
- free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr));
-}
+++ /dev/null
-/*
- * IXP2000 MSF network device driver
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __IXPDEV_H
-#define __IXPDEV_H
-
-struct ixpdev_priv
-{
- struct net_device *dev;
- struct napi_struct napi;
- int channel;
- int tx_queue_entries;
-};
-
-struct net_device *ixpdev_alloc(int channel, int sizeof_priv);
-int ixpdev_init(int num_ports, struct net_device **nds,
- void (*set_port_admin_status)(int port, int up));
-void ixpdev_deinit(void);
-
-
-#endif
+++ /dev/null
-/*
- * IXP2000 MSF network device driver
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __IXPDEV_PRIV_H
-#define __IXPDEV_PRIV_H
-
-#define RX_BUF_DESC_BASE 0x00001000
-#define RX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_rx_desc)))
-#define TX_BUF_DESC_BASE 0x00002000
-#define TX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_tx_desc)))
-#define TX_BUF_COUNT_PER_CHAN (TX_BUF_COUNT / 4)
-
-#define RING_RX_PENDING ((u32 *)IXP2000_SCRATCH_RING_VIRT_BASE)
-#define RING_RX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 4))
-#define RING_TX_PENDING ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 8))
-#define RING_TX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 12))
-
-#define SCRATCH_REG(x) ((u32 *)(IXP2000_GLOBAL_REG_VIRT_BASE | 0x0800 | (x)))
-#define RING_RX_PENDING_BASE SCRATCH_REG(0x00)
-#define RING_RX_PENDING_HEAD SCRATCH_REG(0x04)
-#define RING_RX_PENDING_TAIL SCRATCH_REG(0x08)
-#define RING_RX_DONE_BASE SCRATCH_REG(0x10)
-#define RING_RX_DONE_HEAD SCRATCH_REG(0x14)
-#define RING_RX_DONE_TAIL SCRATCH_REG(0x18)
-#define RING_TX_PENDING_BASE SCRATCH_REG(0x20)
-#define RING_TX_PENDING_HEAD SCRATCH_REG(0x24)
-#define RING_TX_PENDING_TAIL SCRATCH_REG(0x28)
-#define RING_TX_DONE_BASE SCRATCH_REG(0x30)
-#define RING_TX_DONE_HEAD SCRATCH_REG(0x34)
-#define RING_TX_DONE_TAIL SCRATCH_REG(0x38)
-
-struct ixpdev_rx_desc
-{
- u32 buf_addr;
- u32 buf_length;
- u32 channel;
- u32 pkt_length;
-};
-
-struct ixpdev_tx_desc
-{
- u32 buf_addr;
- u32 pkt_length;
- u32 channel;
- u32 unused;
-};
-
-
-#endif
+++ /dev/null
-/*
- * Helper functions for the PM3386s on the Radisys ENP2611
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <asm/io.h>
-#include "pm3386.h"
-
-/*
- * Read from register 'reg' of PM3386 device 'pm'.
- */
-static u16 pm3386_reg_read(int pm, int reg)
-{
- void *_reg;
- u16 value;
-
- _reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
- if (pm == 1)
- _reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
-
- value = *((volatile u16 *)(_reg + (reg << 1)));
-
-// printk(KERN_INFO "pm3386_reg_read(%d, %.3x) = %.8x\n", pm, reg, value);
-
- return value;
-}
-
-/*
- * Write to register 'reg' of PM3386 device 'pm', and perform
- * a readback from the identification register.
- */
-static void pm3386_reg_write(int pm, int reg, u16 value)
-{
- void *_reg;
- u16 dummy;
-
-// printk(KERN_INFO "pm3386_reg_write(%d, %.3x, %.8x)\n", pm, reg, value);
-
- _reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
- if (pm == 1)
- _reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
-
- *((volatile u16 *)(_reg + (reg << 1))) = value;
-
- dummy = *((volatile u16 *)_reg);
- __asm__ __volatile__("mov %0, %0" : "+r" (dummy));
-}
-
-/*
- * Read from port 'port' register 'reg', where the registers
- * for the different ports are 'spacing' registers apart.
- */
-static u16 pm3386_port_reg_read(int port, int _reg, int spacing)
-{
- int reg;
-
- reg = _reg;
- if (port & 1)
- reg += spacing;
-
- return pm3386_reg_read(port >> 1, reg);
-}
-
-/*
- * Write to port 'port' register 'reg', where the registers
- * for the different ports are 'spacing' registers apart.
- */
-static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value)
-{
- int reg;
-
- reg = _reg;
- if (port & 1)
- reg += spacing;
-
- pm3386_reg_write(port >> 1, reg, value);
-}
-
-int pm3386_secondary_present(void)
-{
- return pm3386_reg_read(1, 0) == 0x3386;
-}
-
-void pm3386_reset(void)
-{
- u8 mac[3][6];
- int secondary;
-
- secondary = pm3386_secondary_present();
-
- /* Save programmed MAC addresses. */
- pm3386_get_mac(0, mac[0]);
- pm3386_get_mac(1, mac[1]);
- if (secondary)
- pm3386_get_mac(2, mac[2]);
-
- /* Assert analog and digital reset. */
- pm3386_reg_write(0, 0x002, 0x0060);
- if (secondary)
- pm3386_reg_write(1, 0x002, 0x0060);
- mdelay(1);
-
- /* Deassert analog reset. */
- pm3386_reg_write(0, 0x002, 0x0062);
- if (secondary)
- pm3386_reg_write(1, 0x002, 0x0062);
- mdelay(10);
-
- /* Deassert digital reset. */
- pm3386_reg_write(0, 0x002, 0x0063);
- if (secondary)
- pm3386_reg_write(1, 0x002, 0x0063);
- mdelay(10);
-
- /* Restore programmed MAC addresses. */
- pm3386_set_mac(0, mac[0]);
- pm3386_set_mac(1, mac[1]);
- if (secondary)
- pm3386_set_mac(2, mac[2]);
-
- /* Disable carrier on all ports. */
- pm3386_set_carrier(0, 0);
- pm3386_set_carrier(1, 0);
- if (secondary)
- pm3386_set_carrier(2, 0);
-}
-
-static u16 swaph(u16 x)
-{
- return ((x << 8) | (x >> 8)) & 0xffff;
-}
-
-int pm3386_port_count(void)
-{
- return 2 + pm3386_secondary_present();
-}
-
-void pm3386_init_port(int port)
-{
- int pm = port >> 1;
-
- /*
- * Work around ENP2611 bootloader programming MAC address
- * in reverse.
- */
- if (pm3386_port_reg_read(port, 0x30a, 0x100) == 0x0000 &&
- (pm3386_port_reg_read(port, 0x309, 0x100) & 0xff00) == 0x5000) {
- u16 temp[3];
-
- temp[0] = pm3386_port_reg_read(port, 0x308, 0x100);
- temp[1] = pm3386_port_reg_read(port, 0x309, 0x100);
- temp[2] = pm3386_port_reg_read(port, 0x30a, 0x100);
- pm3386_port_reg_write(port, 0x308, 0x100, swaph(temp[2]));
- pm3386_port_reg_write(port, 0x309, 0x100, swaph(temp[1]));
- pm3386_port_reg_write(port, 0x30a, 0x100, swaph(temp[0]));
- }
-
- /*
- * Initialise narrowbanding mode. See application note 2010486
- * for more information. (@@@ We also need to issue a reset
- * when ROOL or DOOL are detected.)
- */
- pm3386_port_reg_write(port, 0x708, 0x10, 0xd055);
- udelay(500);
- pm3386_port_reg_write(port, 0x708, 0x10, 0x5055);
-
- /*
- * SPI-3 ingress block. Set 64 bytes SPI-3 burst size
- * towards SPI-3 bridge.
- */
- pm3386_port_reg_write(port, 0x122, 0x20, 0x0002);
-
- /*
- * Enable ingress protocol checking, and soft reset the
- * SPI-3 ingress block.
- */
- pm3386_reg_write(pm, 0x103, 0x0003);
- while (!(pm3386_reg_read(pm, 0x103) & 0x80))
- ;
-
- /*
- * SPI-3 egress block. Gather 12288 bytes of the current
- * packet in the TX fifo before initiating transmit on the
- * SERDES interface. (Prevents TX underflows.)
- */
- pm3386_port_reg_write(port, 0x221, 0x20, 0x0007);
-
- /*
- * Enforce odd parity from the SPI-3 bridge, and soft reset
- * the SPI-3 egress block.
- */
- pm3386_reg_write(pm, 0x203, 0x000d & ~(4 << (port & 1)));
- while ((pm3386_reg_read(pm, 0x203) & 0x000c) != 0x000c)
- ;
-
- /*
- * EGMAC block. Set this channels to reject long preambles,
- * not send or transmit PAUSE frames, enable preamble checking,
- * disable frame length checking, enable FCS appending, enable
- * TX frame padding.
- */
- pm3386_port_reg_write(port, 0x302, 0x100, 0x0113);
-
- /*
- * Soft reset the EGMAC block.
- */
- pm3386_port_reg_write(port, 0x301, 0x100, 0x8000);
- pm3386_port_reg_write(port, 0x301, 0x100, 0x0000);
-
- /*
- * Auto-sense autonegotiation status.
- */
- pm3386_port_reg_write(port, 0x306, 0x100, 0x0100);
-
- /*
- * Allow reception of jumbo frames.
- */
- pm3386_port_reg_write(port, 0x310, 0x100, 9018);
-
- /*
- * Allow transmission of jumbo frames.
- */
- pm3386_port_reg_write(port, 0x336, 0x100, 9018);
-
- /* @@@ Should set 0x337/0x437 (RX forwarding threshold.) */
-
- /*
- * Set autonegotiation parameters to 'no PAUSE, full duplex.'
- */
- pm3386_port_reg_write(port, 0x31c, 0x100, 0x0020);
-
- /*
- * Enable and restart autonegotiation.
- */
- pm3386_port_reg_write(port, 0x318, 0x100, 0x0003);
- pm3386_port_reg_write(port, 0x318, 0x100, 0x0002);
-}
-
-void pm3386_get_mac(int port, u8 *mac)
-{
- u16 temp;
-
- temp = pm3386_port_reg_read(port, 0x308, 0x100);
- mac[0] = temp & 0xff;
- mac[1] = (temp >> 8) & 0xff;
-
- temp = pm3386_port_reg_read(port, 0x309, 0x100);
- mac[2] = temp & 0xff;
- mac[3] = (temp >> 8) & 0xff;
-
- temp = pm3386_port_reg_read(port, 0x30a, 0x100);
- mac[4] = temp & 0xff;
- mac[5] = (temp >> 8) & 0xff;
-}
-
-void pm3386_set_mac(int port, u8 *mac)
-{
- pm3386_port_reg_write(port, 0x308, 0x100, (mac[1] << 8) | mac[0]);
- pm3386_port_reg_write(port, 0x309, 0x100, (mac[3] << 8) | mac[2]);
- pm3386_port_reg_write(port, 0x30a, 0x100, (mac[5] << 8) | mac[4]);
-}
-
-static u32 pm3386_get_stat(int port, u16 base)
-{
- u32 value;
-
- value = pm3386_port_reg_read(port, base, 0x100);
- value |= pm3386_port_reg_read(port, base + 1, 0x100) << 16;
-
- return value;
-}
-
-void pm3386_get_stats(int port, struct net_device_stats *stats)
-{
- /*
- * Snapshot statistics counters.
- */
- pm3386_port_reg_write(port, 0x500, 0x100, 0x0001);
- while (pm3386_port_reg_read(port, 0x500, 0x100) & 0x0001)
- ;
-
- memset(stats, 0, sizeof(*stats));
-
- stats->rx_packets = pm3386_get_stat(port, 0x510);
- stats->tx_packets = pm3386_get_stat(port, 0x590);
- stats->rx_bytes = pm3386_get_stat(port, 0x514);
- stats->tx_bytes = pm3386_get_stat(port, 0x594);
- /* @@@ Add other stats. */
-}
-
-void pm3386_set_carrier(int port, int state)
-{
- pm3386_port_reg_write(port, 0x703, 0x10, state ? 0x1001 : 0x0000);
-}
-
-int pm3386_is_link_up(int port)
-{
- u16 temp;
-
- temp = pm3386_port_reg_read(port, 0x31a, 0x100);
- temp = pm3386_port_reg_read(port, 0x31a, 0x100);
-
- return !!(temp & 0x0002);
-}
-
-void pm3386_enable_rx(int port)
-{
- u16 temp;
-
- temp = pm3386_port_reg_read(port, 0x303, 0x100);
- temp |= 0x1000;
- pm3386_port_reg_write(port, 0x303, 0x100, temp);
-}
-
-void pm3386_disable_rx(int port)
-{
- u16 temp;
-
- temp = pm3386_port_reg_read(port, 0x303, 0x100);
- temp &= 0xefff;
- pm3386_port_reg_write(port, 0x303, 0x100, temp);
-}
-
-void pm3386_enable_tx(int port)
-{
- u16 temp;
-
- temp = pm3386_port_reg_read(port, 0x303, 0x100);
- temp |= 0x4000;
- pm3386_port_reg_write(port, 0x303, 0x100, temp);
-}
-
-void pm3386_disable_tx(int port)
-{
- u16 temp;
-
- temp = pm3386_port_reg_read(port, 0x303, 0x100);
- temp &= 0xbfff;
- pm3386_port_reg_write(port, 0x303, 0x100, temp);
-}
-
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Helper functions for the PM3386s on the Radisys ENP2611
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __PM3386_H
-#define __PM3386_H
-
-void pm3386_reset(void);
-int pm3386_port_count(void);
-void pm3386_init_port(int port);
-void pm3386_get_mac(int port, u8 *mac);
-void pm3386_set_mac(int port, u8 *mac);
-void pm3386_get_stats(int port, struct net_device_stats *stats);
-void pm3386_set_carrier(int port, int state);
-int pm3386_is_link_up(int port);
-void pm3386_enable_rx(int port);
-void pm3386_disable_rx(int port);
-void pm3386_enable_tx(int port);
-void pm3386_disable_tx(int port);
-
-
-#endif
projects / profile / ivi / kernel-adaptation-intel-automotive.git / commitdiff