Fix CONFIG_ETH*ADDR for Ocotea board.

Sort Makefile.
Update docs.

diff --git a/Makefile b/Makefile
index 8674eb8..a55d88a 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1148,6 +1148,24 @@ tb0229_config: unconfig
        @./mkconfig $(@:_config=) mips mips tb0229
 
 #########################################################################
+## MIPS32 AU1X00
+#########################################################################
+dbau1000_config                :       unconfig
+       @ >include/config.h
+       @echo "#define CONFIG_DBAU1000 1" >>include/config.h
+       @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+dbau1100_config                :       unconfig
+       @ >include/config.h
+       @echo "#define CONFIG_DBAU1100 1" >>include/config.h
+       @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+dbau1500_config                :       unconfig
+       @ >include/config.h
+       @echo "#define CONFIG_DBAU1500 1" >>include/config.h
+       @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+#########################################################################
 ## MIPS64 5Kc
 #########################################################################
 
@@ -1233,24 +1251,6 @@ suzaku_config:   unconfig
        @./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
 #########################################################################
-## MIPS32 AU1X00
-#########################################################################
-dbau1000_config                :       unconfig
-       @ >include/config.h
-       @echo "#define CONFIG_DBAU1000 1" >>include/config.h
-       @./mkconfig -a dbau1x00 mips mips dbau1x00
-
-dbau1100_config                :       unconfig
-       @ >include/config.h
-       @echo "#define CONFIG_DBAU1100 1" >>include/config.h
-       @./mkconfig -a dbau1x00 mips mips dbau1x00
-
-dbau1500_config                :       unconfig
-       @ >include/config.h
-       @echo "#define CONFIG_DBAU1500 1" >>include/config.h
-       @./mkconfig -a dbau1x00 mips mips dbau1x00
-
-#########################################################################
 #########################################################################
 
 clean:

diff --git a/README b/README
index bfccadf..ddb58c3 100644 (file)
--- a/README
+++ b/README
@@ -2554,8 +2554,9 @@ from a "data file" which is used as image payload:
          -n ==> set image name to 'name'
          -d ==> use image data from 'datafile'
 
-Right now, all Linux kernels use the same load address (0x00000000),
-but the entry point address depends on the kernel version:
+Right now, all Linux kernels for PowerPC systems use the same load
+address (0x00000000), but the entry point address depends on the
+kernel version:
 
 - 2.2.x kernels have the entry point at 0x0000000C,
 - 2.3.x and later kernels have the entry point at 0x00000000.

diff --git a/common/env_common.c b/common/env_common.c
index d46f24f..4aa043e 100644 (file)
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -94,6 +94,9 @@ uchar default_environment[] = {
 #ifdef CONFIG_ETH2ADDR
        "eth2addr="     MK_STR(CONFIG_ETH2ADDR)         "\0"
 #endif
+#ifdef CONFIG_ETH3ADDR
+       "eth3addr="     MK_STR(CONFIG_ETH3ADDR)         "\0"
+#endif
 #ifdef CONFIG_IPADDR
        "ipaddr="       MK_STR(CONFIG_IPADDR)           "\0"
 #endif

diff --git a/include/configs/OCOTEA.h b/include/configs/OCOTEA.h
index 74e5acd..6f8fd1d 100644 (file)
--- a/include/configs/OCOTEA.h
+++ b/include/configs/OCOTEA.h
@@ -154,9 +154,9 @@
 #define CONFIG_NETMASK         255.255.255.0
 #define CONFIG_IPADDR          10.1.2.3
 #define CONFIG_ETHADDR         00:04:AC:E3:28:8A
-#define CONFIG_ETHADDR1                00:04:AC:E3:28:8B
-#define CONFIG_ETHADDR2                00:04:AC:E3:28:8C
-#define CONFIG_ETHADDR3                00:04:AC:E3:28:8D
+#define CONFIG_ETH1ADDR                00:04:AC:E3:28:8B
+#define CONFIG_ETH2ADDR                00:04:AC:E3:28:8C
+#define CONFIG_ETH3ADDR                00:04:AC:E3:28:8D
 #define CFG_RX_ETH_BUFFER      32        /* Number of ethernet rx buffers & descriptors */
 #define CONFIG_SERVERIP                10.1.2.2
 

diff --git a/lib_mips/board.c b/lib_mips/board.c
index 65a0bc3..7f5fa80 100644 (file)
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -190,8 +190,8 @@ void board_init_f(ulong bootflag)
        void copy_code (ulong);
 #endif
 
-               /* Pointer is writable since we allocated a register for it.
-                */
+       /* Pointer is writable since we allocated a register for it.
+        */
        gd = &gd_data;
        memset ((void *)gd, 0, sizeof (gd_t));
 
@@ -207,33 +207,27 @@ void board_init_f(ulong bootflag)
         */
        addr = CFG_SDRAM_BASE + gd->ram_size;
 
-               /* We can reserve some RAM "on top" here.
-                */
+       /* We can reserve some RAM "on top" here.
+        */
 
-               /* round down to next 4 kB limit.
-                */
+       /* round down to next 4 kB limit.
+        */
        addr &= ~(4096 - 1);
-#ifdef DEBUG
-       printf ("Top of RAM usable for U-Boot at: %08lx\n", addr);
-#endif
+       debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
 
-               /* Reserve memory for U-Boot code, data & bss
-                * round down to next 16 kB limit
-                */
+       /* Reserve memory for U-Boot code, data & bss
+        * round down to next 16 kB limit
+        */
        addr -= len;
        addr &= ~(16 * 1024 - 1);
 
-#ifdef DEBUG
-       printf ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
-#endif
+       debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
 
-               /* Reserve memory for malloc() arena.
-                */
+        /* Reserve memory for malloc() arena.
+        */
        addr_sp = addr - TOTAL_MALLOC_LEN;
-#ifdef DEBUG
-       printf ("Reserving %dk for malloc() at: %08lx\n",
+       debug ("Reserving %dk for malloc() at: %08lx\n",
                        TOTAL_MALLOC_LEN >> 10, addr_sp);
-#endif
 
        /*
         * (permanently) allocate a Board Info struct
@@ -242,25 +236,20 @@ void board_init_f(ulong bootflag)
        addr_sp -= sizeof(bd_t);
        bd = (bd_t *)addr_sp;
        gd->bd = bd;
-#ifdef DEBUG
-       printf ("Reserving %d Bytes for Board Info at: %08lx\n",
+       debug ("Reserving %d Bytes for Board Info at: %08lx\n",
                        sizeof(bd_t), addr_sp);
-#endif
+
        addr_sp -= sizeof(gd_t);
        id = (gd_t *)addr_sp;
-#ifdef DEBUG
-       printf ("Reserving %d Bytes for Global Data at: %08lx\n",
+       debug ("Reserving %d Bytes for Global Data at: %08lx\n",
                        sizeof (gd_t), addr_sp);
-#endif
 
-               /* Reserve memory for boot params.
-                */
+       /* Reserve memory for boot params.
+        */
        addr_sp -= CFG_BOOTPARAMS_LEN;
        bd->bi_boot_params = addr_sp;
-#ifdef DEBUG
-       printf ("Reserving %dk for malloc() at: %08lx\n",
+       debug ("Reserving %dk for boot params() at: %08lx\n",
                        CFG_BOOTPARAMS_LEN >> 10, addr_sp);
-#endif
 
        /*
         * Finally, we set up a new (bigger) stack.
@@ -272,9 +261,8 @@ void board_init_f(ulong bootflag)
        addr_sp &= ~0xF;
        *((ulong *) addr_sp)-- = 0;
        *((ulong *) addr_sp)-- = 0;
-#ifdef DEBUG
-       printf ("Stack Pointer at: %08lx\n", addr_sp);
-#endif
+       debug ("Stack Pointer at: %08lx\n", addr_sp);
+
        /*
         * Save local variables to board info struct
         */
@@ -321,9 +309,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
        gd = id;
        gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */
 
-#ifdef DEBUG
-       printf ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
-#endif
+       debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 
        gd->reloc_off = dest_addr - CFG_MONITOR_BASE;