tty: serial: 8250_mtk: use pm_runtime callbacks for enabling
authorSascha Hauer <s.hauer@pengutronix.de>
Mon, 27 Apr 2015 06:49:56 +0000 (08:49 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 6 May 2015 20:27:02 +0000 (22:27 +0200)
The pm_runtime callbacks already enable and disable the device.
Use them in probe() and remove() instead of duplicating the
code. This allows us to concentrate more code for enabling/disabling
the UART in a single place.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty/serial/8250/8250_mtk.c

index bcfaa8d..2f28bd0 100644 (file)
@@ -115,6 +115,29 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
                tty_termios_encode_baud_rate(termios, baud, baud);
 }
 
+static int mtk8250_runtime_suspend(struct device *dev)
+{
+       struct mtk8250_data *data = dev_get_drvdata(dev);
+
+       clk_disable_unprepare(data->uart_clk);
+
+       return 0;
+}
+
+static int mtk8250_runtime_resume(struct device *dev)
+{
+       struct mtk8250_data *data = dev_get_drvdata(dev);
+       int err;
+
+       err = clk_prepare_enable(data->uart_clk);
+       if (err) {
+               dev_warn(dev, "Can't enable clock\n");
+               return err;
+       }
+
+       return 0;
+}
+
 static void
 mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
 {
@@ -130,19 +153,12 @@ mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
 static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p,
                           struct mtk8250_data *data)
 {
-       int err;
-
        data->uart_clk = devm_clk_get(&pdev->dev, NULL);
        if (IS_ERR(data->uart_clk)) {
                dev_warn(&pdev->dev, "Can't get uart clock\n");
                return PTR_ERR(data->uart_clk);
        }
 
-       err = clk_prepare_enable(data->uart_clk);
-       if (err) {
-               dev_warn(&pdev->dev, "Can't prepare clock\n");
-               return err;
-       }
        p->uartclk = clk_get_rate(data->uart_clk);
 
        return 0;
@@ -193,14 +209,18 @@ static int mtk8250_probe(struct platform_device *pdev)
        writel(0x0, uart.port.membase +
                        (MTK_UART_RATE_FIX << uart.port.regshift));
 
-       data->line = serial8250_register_8250_port(&uart);
-       if (data->line < 0)
-               return data->line;
-
        platform_set_drvdata(pdev, data);
 
-       pm_runtime_set_active(&pdev->dev);
        pm_runtime_enable(&pdev->dev);
+       if (!pm_runtime_enabled(&pdev->dev)) {
+               err = mtk8250_runtime_resume(&pdev->dev);
+               if (err)
+                       return err;
+       }
+
+       data->line = serial8250_register_8250_port(&uart);
+       if (data->line < 0)
+               return data->line;
 
        return 0;
 }
@@ -212,10 +232,13 @@ static int mtk8250_remove(struct platform_device *pdev)
        pm_runtime_get_sync(&pdev->dev);
 
        serial8250_unregister_port(data->line);
-       clk_disable_unprepare(data->uart_clk);
 
        pm_runtime_disable(&pdev->dev);
        pm_runtime_put_noidle(&pdev->dev);
+
+       if (!pm_runtime_status_suspended(&pdev->dev))
+               mtk8250_runtime_suspend(&pdev->dev);
+
        return 0;
 }
 
@@ -239,26 +262,6 @@ static int mtk8250_resume(struct device *dev)
 }
 #endif /* CONFIG_PM_SLEEP */
 
-#ifdef CONFIG_PM
-static int mtk8250_runtime_suspend(struct device *dev)
-{
-       struct mtk8250_data *data = dev_get_drvdata(dev);
-
-       clk_disable_unprepare(data->uart_clk);
-
-       return 0;
-}
-
-static int mtk8250_runtime_resume(struct device *dev)
-{
-       struct mtk8250_data *data = dev_get_drvdata(dev);
-
-       clk_prepare_enable(data->uart_clk);
-
-       return 0;
-}
-#endif
-
 static const struct dev_pm_ops mtk8250_pm_ops = {
        SET_SYSTEM_SLEEP_PM_OPS(mtk8250_suspend, mtk8250_resume)
        SET_RUNTIME_PM_OPS(mtk8250_runtime_suspend, mtk8250_runtime_resume,