usb: misc: usb3503: Convert to regmap
authorMark Brown <broonie@linaro.org>
Fri, 9 Aug 2013 10:41:52 +0000 (11:41 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Mon, 12 Aug 2013 19:20:26 +0000 (12:20 -0700)
This will give access to the diagnostic infrastructure regmap has but
the main point is to support future refactoring.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/misc/Kconfig
drivers/usb/misc/usb3503.c

index ca91420..e2b21c1 100644 (file)
@@ -246,5 +246,6 @@ config USB_EZUSB_FX2
 config USB_HSIC_USB3503
        tristate "USB3503 HSIC to USB20 Driver"
        depends on I2C
+       select REGMAP
        help
          This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
index 4b6572a..f2c0356 100644 (file)
@@ -26,6 +26,7 @@
 #include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/usb3503.h>
+#include <linux/regmap.h>
 
 #define USB3503_VIDL           0x00
 #define USB3503_VIDM           0x01
 #define USB3503_CFGP           0xee
 #define USB3503_CLKSUSP                (1 << 7)
 
+#define USB3503_RESET          0xff
+
 struct usb3503 {
        enum usb3503_mode       mode;
-       struct i2c_client       *client;
+       struct regmap           *regmap;
+       struct device           *dev;
        u8      port_off_mask;
        int     gpio_intn;
        int     gpio_reset;
        int     gpio_connect;
 };
 
-static int usb3503_write_register(struct i2c_client *client,
-               char reg, char data)
-{
-       return i2c_smbus_write_byte_data(client, reg, data);
-}
-
-static int usb3503_read_register(struct i2c_client *client, char reg)
-{
-       return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int usb3503_set_bits(struct i2c_client *client, char reg, char req)
-{
-       int err;
-
-       err = usb3503_read_register(client, reg);
-       if (err < 0)
-               return err;
-
-       err = usb3503_write_register(client, reg, err | req);
-       if (err < 0)
-               return err;
-
-       return 0;
-}
-
-static int usb3503_clear_bits(struct i2c_client *client, char reg, char req)
-{
-       int err;
-
-       err = usb3503_read_register(client, reg);
-       if (err < 0)
-               return err;
-
-       err = usb3503_write_register(client, reg, err & ~req);
-       if (err < 0)
-               return err;
-
-       return 0;
-}
-
 static int usb3503_reset(struct usb3503 *hub, int state)
 {
        if (!state && gpio_is_valid(hub->gpio_connect))
@@ -117,7 +80,7 @@ static int usb3503_reset(struct usb3503 *hub, int state)
 
 static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
 {
-       struct i2c_client *i2c = hub->client;
+       struct device *dev = hub->dev;
        int err = 0;
 
        switch (mode) {
@@ -125,37 +88,40 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
                usb3503_reset(hub, 1);
 
                /* SP_ILOCK: set connect_n, config_n for config */
-               err = usb3503_write_register(i2c, USB3503_SP_ILOCK,
+               err = regmap_write(hub->regmap, USB3503_SP_ILOCK,
                                (USB3503_SPILOCK_CONNECT
                                 | USB3503_SPILOCK_CONFIG));
                if (err < 0) {
-                       dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
+                       dev_err(dev, "SP_ILOCK failed (%d)\n", err);
                        goto err_hubmode;
                }
 
                /* PDS : Disable For Self Powered Operation */
                if (hub->port_off_mask) {
-                       err = usb3503_set_bits(i2c, USB3503_PDS,
+                       err = regmap_update_bits(hub->regmap, USB3503_PDS,
+                                       hub->port_off_mask,
                                        hub->port_off_mask);
                        if (err < 0) {
-                               dev_err(&i2c->dev, "PDS failed (%d)\n", err);
+                               dev_err(dev, "PDS failed (%d)\n", err);
                                goto err_hubmode;
                        }
                }
 
                /* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */
-               err = usb3503_set_bits(i2c, USB3503_CFG1, USB3503_SELF_BUS_PWR);
+               err = regmap_update_bits(hub->regmap, USB3503_CFG1,
+                                        USB3503_SELF_BUS_PWR,
+                                        USB3503_SELF_BUS_PWR);
                if (err < 0) {
-                       dev_err(&i2c->dev, "CFG1 failed (%d)\n", err);
+                       dev_err(dev, "CFG1 failed (%d)\n", err);
                        goto err_hubmode;
                }
 
                /* SP_LOCK: clear connect_n, config_n for hub connect */
-               err = usb3503_clear_bits(i2c, USB3503_SP_ILOCK,
-                               (USB3503_SPILOCK_CONNECT
-                                | USB3503_SPILOCK_CONFIG));
+               err = regmap_update_bits(hub->regmap, USB3503_SP_ILOCK,
+                                        (USB3503_SPILOCK_CONNECT
+                                         | USB3503_SPILOCK_CONFIG), 0);
                if (err < 0) {
-                       dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
+                       dev_err(dev, "SP_ILOCK failed (%d)\n", err);
                        goto err_hubmode;
                }
 
@@ -163,18 +129,18 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
                        gpio_set_value_cansleep(hub->gpio_connect, 1);
 
                hub->mode = mode;
-               dev_info(&i2c->dev, "switched to HUB mode\n");
+               dev_info(dev, "switched to HUB mode\n");
                break;
 
        case USB3503_MODE_STANDBY:
                usb3503_reset(hub, 0);
 
                hub->mode = mode;
-               dev_info(&i2c->dev, "switched to STANDBY mode\n");
+               dev_info(dev, "switched to STANDBY mode\n");
                break;
 
        default:
-               dev_err(&i2c->dev, "unknown mode is request\n");
+               dev_err(dev, "unknown mode is request\n");
                err = -EINVAL;
                break;
        }
@@ -183,6 +149,13 @@ err_hubmode:
        return err;
 }
 
+static const struct regmap_config usb3503_regmap_config = {
+       .reg_bits = 8,
+       .val_bits = 8,
+
+       .max_register = USB3503_RESET,
+};
+
 static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 {
        struct usb3503_platform_data *pdata = dev_get_platdata(&i2c->dev);
@@ -200,7 +173,13 @@ static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
        }
 
        i2c_set_clientdata(i2c, hub);
-       hub->client = i2c;
+       hub->regmap = devm_regmap_init_i2c(i2c, &usb3503_regmap_config);
+       if (IS_ERR(hub->regmap)) {
+               err = PTR_ERR(hub->regmap);
+               dev_err(&i2c->dev, "Failed to initialise regmap: %d\n", err);
+               return err;
+       }
+       hub->dev = &i2c->dev;
 
        if (pdata) {
                hub->port_off_mask      = pdata->port_off_mask;