return len;
}
+
/**
- * ixgbe_fcoe_ddp_get - called to set up ddp context
+ * ixgbe_fcoe_ddp_setup - called to set up ddp context
* @netdev: the corresponding net_device
* @xid: the exchange id requesting ddp
* @sgl: the scatter-gather list for this request
* @sgc: the number of scatter-gather items
*
- * This is the implementation of net_device_ops.ndo_fcoe_ddp_setup
- * and is expected to be called from ULD, e.g., FCP layer of libfc
- * to set up ddp for the corresponding xid of the given sglist for
- * the corresponding I/O.
- *
* Returns : 1 for success and 0 for no ddp
*/
-int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
- struct scatterlist *sgl, unsigned int sgc)
+static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
+ struct scatterlist *sgl, unsigned int sgc,
+ int target_mode)
{
struct ixgbe_adapter *adapter;
struct ixgbe_hw *hw;
unsigned int lastsize;
unsigned int thisoff = 0;
unsigned int thislen = 0;
- u32 fcbuff, fcdmarw, fcfltrw;
+ u32 fcbuff, fcdmarw, fcfltrw, fcrxctl;
dma_addr_t addr = 0;
if (!netdev || !sgl)
fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT);
fcbuff |= ((j & 0xff) << IXGBE_FCBUFF_BUFFCNT_SHIFT);
fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT);
+ /* Set WRCONTX bit to allow DDP for target */
+ if (target_mode)
+ fcbuff |= (IXGBE_FCBUFF_WRCONTX);
fcbuff |= (IXGBE_FCBUFF_VALID);
fcdmarw = xid;
/* program DMA context */
hw = &adapter->hw;
spin_lock_bh(&fcoe->lock);
+
+ /* turn on last frame indication for target mode as FCP_RSPtarget is
+ * supposed to send FCP_RSP when it is done. */
+ if (target_mode && !test_bit(__IXGBE_FCOE_TARGET, &fcoe->mode)) {
+ set_bit(__IXGBE_FCOE_TARGET, &fcoe->mode);
+ fcrxctl = IXGBE_READ_REG(hw, IXGBE_FCRXCTRL);
+ fcrxctl |= IXGBE_FCRXCTRL_LASTSEQH;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL, fcrxctl);
+ }
+
IXGBE_WRITE_REG(hw, IXGBE_FCPTRL, ddp->udp & DMA_BIT_MASK(32));
IXGBE_WRITE_REG(hw, IXGBE_FCPTRH, (u64)ddp->udp >> 32);
IXGBE_WRITE_REG(hw, IXGBE_FCBUFF, fcbuff);
IXGBE_WRITE_REG(hw, IXGBE_FCPARAM, 0);
IXGBE_WRITE_REG(hw, IXGBE_FCFLT, IXGBE_FCFLT_VALID);
IXGBE_WRITE_REG(hw, IXGBE_FCFLTRW, fcfltrw);
+
spin_unlock_bh(&fcoe->lock);
return 1;
}
/**
+ * ixgbe_fcoe_ddp_get - called to set up ddp context in initiator mode
+ * @netdev: the corresponding net_device
+ * @xid: the exchange id requesting ddp
+ * @sgl: the scatter-gather list for this request
+ * @sgc: the number of scatter-gather items
+ *
+ * This is the implementation of net_device_ops.ndo_fcoe_ddp_setup
+ * and is expected to be called from ULD, e.g., FCP layer of libfc
+ * to set up ddp for the corresponding xid of the given sglist for
+ * the corresponding I/O.
+ *
+ * Returns : 1 for success and 0 for no ddp
+ */
+int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
+ struct scatterlist *sgl, unsigned int sgc)
+{
+ return ixgbe_fcoe_ddp_setup(netdev, xid, sgl, sgc, 0);
+}
+
+/**
+ * ixgbe_fcoe_ddp_target - called to set up ddp context in target mode
+ * @netdev: the corresponding net_device
+ * @xid: the exchange id requesting ddp
+ * @sgl: the scatter-gather list for this request
+ * @sgc: the number of scatter-gather items
+ *
+ * This is the implementation of net_device_ops.ndo_fcoe_ddp_target
+ * and is expected to be called from ULD, e.g., FCP layer of libfc
+ * to set up ddp for the corresponding xid of the given sglist for
+ * the corresponding I/O. The DDP in target mode is a write I/O request
+ * from the initiator.
+ *
+ * Returns : 1 for success and 0 for no ddp
+ */
+int ixgbe_fcoe_ddp_target(struct net_device *netdev, u16 xid,
+ struct scatterlist *sgl, unsigned int sgc)
+{
+ return ixgbe_fcoe_ddp_setup(netdev, xid, sgl, sgc, 1);
+}
+
+/**
* ixgbe_fcoe_ddp - check ddp status and mark it done
* @adapter: ixgbe adapter
* @rx_desc: advanced rx descriptor
struct ixgbe_fcoe *fcoe;
struct ixgbe_fcoe_ddp *ddp;
struct fc_frame_header *fh;
+ struct fcoe_crc_eof *crc;
if (!ixgbe_rx_is_fcoe(rx_desc))
goto ddp_out;
else if (ddp->len)
rc = ddp->len;
}
-
+ /* In target mode, check the last data frame of the sequence.
+ * For DDP in target mode, data is already DDPed but the header
+ * indication of the last data frame ould allow is to tell if we
+ * got all the data and the ULP can send FCP_RSP back, as this is
+ * not a full fcoe frame, we fill the trailer here so it won't be
+ * dropped by the ULP stack.
+ */
+ if ((fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA) &&
+ (fctl & FC_FC_END_SEQ)) {
+ crc = (struct fcoe_crc_eof *)skb_put(skb, sizeof(*crc));
+ crc->fcoe_eof = FC_EOF_T;
+ }
ddp_out:
return rc;
}
}
return rc;
}
-
-