+2010-09-02 Michael Meissner <meissner@linux.vnet.ibm.com>
+
+ * config/rs6000/rs6000.opt (-mfriz): New switch to control whether
+ to convert (double)(long) into a single FRIZ instruction or not
+ when -ffast-math is used.
+
+ * config/rs6000/vsx.md (VSX_DF): New iterator for DF/V2DF modes.
+ (vsx_float_fix_<mode>2): Optimize (double)(long) into X{S,V}RDPIZ
+ or FRIZ instruction if -ffast-math.
+ * config/rs6000/rs6000.md (friz): Ditto.
+
+ * doc/invoke.texi (RS/6000 and PowerPC Options): Document -mfriz.
+
2010-09-02 Joseph Myers <joseph@codesourcery.com>
* opth-gen.awk (quote, comma): Remove unused variables.
"fctiwuz %0,%1"
[(set_attr "type" "fp")])
+;; Only optimize (float (fix x)) -> frz if we are in fast-math mode, since
+;; since the friz instruction does not truncate the value if the floating
+;; point value is < LONG_MIN or > LONG_MAX.
+(define_insn "*friz"
+ [(set (match_operand:DF 0 "gpc_reg_operand" "=d")
+ (float:DF (fix:DI (match_operand:DF 1 "gpc_reg_operand" "d"))))]
+ "TARGET_HARD_FLOAT && TARGET_FPRS && TARGET_DOUBLE_FLOAT && TARGET_POPCNTB
+ && !VECTOR_UNIT_VSX_P (DFmode) && flag_unsafe_math_optimizations
+ && !flag_trapping_math && TARGET_FRIZ"
+ "friz %0,%1"
+ [(set_attr "type" "fp")])
+
;; No VSX equivalent to fctid
(define_insn "lrint<mode>di2"
[(set (match_operand:DI 0 "gpc_reg_operand" "=d")
; Options for the rs6000 port of the compiler
;
-; Copyright (C) 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+; Copyright (C) 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+; Foundation, Inc.
; Contributed by Aldy Hernandez <aldy@quesejoda.com>.
;
; This file is part of GCC.
Target Report Mask(POPCNTD)
Use PowerPC V2.06 popcntd instruction
+mfriz
+Target Report Var(TARGET_FRIZ) Init(-1)
+Under -ffast-math, generate a FRIZ instruction for (double)(long long) conversions
+
mveclibabi=
Target RejectNegative Joined Var(rs6000_veclibabi_name)
Vector library ABI to use
;; Iterator for the 2 32-bit vector types
(define_mode_iterator VSX_W [V4SF V4SI])
+;; Iterator for the DF types
+(define_mode_iterator VSX_DF [V2DF DF])
+
;; Iterator for vector floating point types supported by VSX
(define_mode_iterator VSX_F [V4SF V2DF])
"VECTOR_UNIT_VSX_P (V2DFmode)"
"xvcvspuxds %x0,%x1"
[(set_attr "type" "vecfloat")])
+
+;; Only optimize (float (fix x)) -> frz if we are in fast-math mode, since
+;; since the xsrdpiz instruction does not truncate the value if the floating
+;; point value is < LONG_MIN or > LONG_MAX.
+(define_insn "*vsx_float_fix_<mode>2"
+ [(set (match_operand:VSX_DF 0 "vsx_register_operand" "=<VSr>,?wa")
+ (float:VSX_DF
+ (fix:<VSI>
+ (match_operand:VSX_DF 1 "vsx_register_operand" "<VSr>,?wa"))))]
+ "TARGET_HARD_FLOAT && TARGET_FPRS && TARGET_DOUBLE_FLOAT
+ && VECTOR_UNIT_VSX_P (<MODE>mode) && flag_unsafe_math_optimizations
+ && !flag_trapping_math && TARGET_FRIZ"
+ "x<VSv>r<VSs>iz %x0,%x1"
+ [(set_attr "type" "<VStype_simple>")
+ (set_attr "fp_type" "<VSfptype_simple>")])
+
\f
;; Logical and permute operations
(define_insn "*vsx_and<mode>3"
-msdata=@var{opt} -mvxworks -G @var{num} -pthread @gol
-mrecip -mrecip=@var{opt} -mno-recip -mrecip-precision
-mno-recip-precision @gol
--mveclibabi=@var{type}}
+-mveclibabi=@var{type} -mfriz -mno-friz}
@emph{RX Options}
@gccoptlist{-m64bit-doubles -m32bit-doubles -fpu -nofpu@gol
for power7. Both @option{-ftree-vectorize} and
@option{-funsafe-math-optimizations} have to be enabled. The MASS
libraries will have to be specified at link time.
+
+@item -mfriz
+@itemx -mno-friz
+@opindex mfriz
+Generate (do not generate) the @code{friz} instruction when the
+@option{-funsafe-math-optimizations} option is used to optimize
+rounding a floating point value to 64-bit integer and back to floating
+point. The @code{friz} instruction does not return the same value if
+the floating point number is too large to fit in an integer.
@end table
@node RX Options
+2010-09-02 Michael Meissner <meissner@linux.vnet.ibm.com>
+
+ * gcc.target/powerpc/ppc-fpconv-10.c: New file to test generating
+ FRIZ/XSRIZ instruciton for (double)(long long)x.
+ * gcc.target/powerpc/ppc-fpconv-11.c: Ditto.
+
2010-09-02 Eric Botcazou <ebotcazou@adacore.com>
* g++.dg/debug/dwarf2/nested-2.C: Allow for ! as comment delimiter.
--- /dev/null
+/* { dg-do compile { target { powerpc*-*-* } } } */
+/* { dg-skip-if "" { powerpc*-*-darwin* } { "*" } { "" } } */
+/* { dg-require-effective-target powerpc_vsx_ok } */
+/* { dg-options "-O2 -mcpu=power7 -ffast-math" } */
+/* { dg-final { scan-assembler "xsrdpiz" } } */
+/* { dg-final { scan-assembler-not "friz" } } */
+
+double round_double_llong (double a)
+{
+ return (double)(long long)a;
+}
--- /dev/null
+/* { dg-do compile { target { powerpc*-*-* } } } */
+/* { dg-skip-if "" { powerpc*-*-darwin* } { "*" } { "" } } */
+/* { dg-options "-O2 -mcpu=power5 -ffast-math" } */
+/* { dg-final { scan-assembler-not "xsrdpiz" } } */
+/* { dg-final { scan-assembler "friz" } } */
+
+double round_double_llong (double a)
+{
+ return (double)(long long)a;
+}