.amux = LINE2,
}},
},
+ [SAA7134_BOARD_AVERMEDIA_A169_B] = {
+ /* AVerMedia A169 */
+ /* Rickard Osser <ricky@osser.se> */
+ /* This card has two saa7134 chips on it,
+ but only one of them is currently working. */
+ .name = "AVerMedia A169 B",
+ .audio_clock = 0x02187de7,
+ .tuner_type = TUNER_LG_TALN,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tda9887_conf = TDA9887_PRESENT,
+ .gpiomask = 0x0a60000,
+ },
+ [SAA7134_BOARD_AVERMEDIA_A169_B1] = {
+ /* AVerMedia A169 */
+ /* Rickard Osser <ricky@osser.se> */
+ .name = "AVerMedia A169 B1",
+ .audio_clock = 0x02187de7,
+ .tuner_type = TUNER_LG_TALN,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tda9887_conf = TDA9887_PRESENT,
+ .gpiomask = 0xca60000,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 4,
+ .amux = TV,
+ .tv = 1,
+ .gpio = 0x04a61000,
+ },{
+ .name = name_comp2, /* Composite SVIDEO (B/W if signal is carried with SVIDEO) */
+ .vmux = 1,
+ .amux = LINE2,
+ },{
+ .name = name_svideo,
+ .vmux = 9, /* 9 is correct as S-VIDEO1 according to a169.inf! */
+ .amux = LINE1,
+ }},
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
.subdevice = 0x7350,
.driver_data = SAA7134_BOARD_KWORLD_ATSC110,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
+ .subvendor = 0x1461,
+ .subdevice = 0x7360,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_A169_B,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
+ .subvendor = 0x1461,
+ .subdevice = 0x6360,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_A169_B1,
+ },{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
case SAA7134_BOARD_UPMOST_PURPLE_TV:
dev->has_remote = SAA7134_REMOTE_I2C;
break;
+ case SAA7134_BOARD_AVERMEDIA_A169_B:
+ printk("%s: AVerMedia A169: dual saa7134 broadcast decoders\n"
+ "%s: Sorry, none of the inputs to this chip are supported yet.\n"
+ "%s: Dual decoder functionality is disabled for now, use the other chip.\n",
+ dev->name,dev->name,dev->name);
+ break;
}
return 0;
}