* ioguestparts */
#define IOCHAN_TO_IOPART 0 /* used by ioguestpart to 'insert' signals to
* iopart */
-#define IOCHAN_FROM_GUESTPART 0 /* used by iopart to 'remove' signals from
- * ioguestpart - same queue as previous queue */
-#define IOCHAN_TO_GUESTPART 1 /* used by iopart to 'insert' signals to
- * ioguestpart */
#define IOCHAN_FROM_IOPART 1 /* used by ioguestpart to 'remove' signals from
* iopart - same queue as previous queue */
-/* these define the two queues per control channel between controlpart and "its"
- * guests, which includes the iopart */
-#define CTRLCHAN_TO_CTRLGUESTPART 0 /* used by ctrlguestpart to 'insert' signals
- * to ctrlpart */
-#define CTLRCHAN_FROM_CTRLPART 0 /* used by ctrlpart to 'remove' signals from
- * ctrlquestpart - same queue as previous
- * queue */
-
-#define CTRLCHAN_TO_CTRLPART 1 /* used by ctrlpart to 'insert' signals to
- * ctrlguestpart */
-#define CTRLCHAN_FROM_CTRLGUESTPART 1 /* used by ctrguestpart to 'remove'
- * signals from ctrlpart - same queue as
- * previous queue */
-
-/* these define the Event & Ack queues per control channel Events are generated
-* by CTRLGUESTPART and sent to CTRLPART; Acks are generated by CTRLPART and sent
-* to CTRLGUESTPART. */
-#define CTRLCHAN_EVENT_TO_CTRLPART 2 /* used by ctrlguestpart to 'insert' Events
- * to ctrlpart */
-#define CTRLCHAN_EVENT_FROM_CTRLGUESTPART 2 /* used by ctrlpart to 'remove'
- * Events from ctrlguestpart */
-
-#define CTRLCHAN_ACK_TO_CTRLGUESTPART 3 /* used by ctrlpart to 'insert' Acks to
- * ctrlguestpart */
-#define CTRLCHAN_ACK_FROM_CTRLPART 3 /* used by ctrlguestpart to 'remove' Events
- * from ctrlpart */
-
/* size of cdb - i.e., scsi cmnd */
#define MAX_CMND_SIZE 16
#define MAX_PHYS_INFO 64
-/* Because GuestToGuestCopy is limited to 4KiB segments, and we have limited the
-* Emulex Driver to 256 scatter list segments via the lpfc_sg_seg_cnt parameter
-* to 256, the maximum I/O size is limited to 256 * 4 KiB = 1 MB */
-#define MAX_IO_SIZE (1024*1024) /* 1 MB */
-
-/* NOTE 1: lpfc defines its support for segments in
-* #define LPFC_SG_SEG_CNT 64
-*
-* NOTE 2: In Linux, frags array in skb is currently allocated to be
-* MAX_SKB_FRAGS size, which is 18 which is smaller than MAX_PHYS_INFO for
-* now. */
-
-#define MAX_SCSI_BUSES 1
-#define MAX_SCSI_TARGETS 8
-#define MAX_SCSI_LUNS 16
-#define MAX_SCSI_FROM_HOST 0xFFFFFFFF /* Indicator to use Physical HBA
- * SCSI Host value */
-
/* various types of network packets that can be sent in cmdrsp */
enum net_types {
NET_RCV_POST = 0, /* submit buffer to hold receiving
#define ETH_MIN_DATA_SIZE 46 /* minimum eth data size */
#define ETH_MIN_PACKET_SIZE (ETH_HEADER_SIZE + ETH_MIN_DATA_SIZE)
-#define ETH_DEF_DATA_SIZE 1500 /* default data size */
-#define ETH_DEF_PACKET_SIZE (ETH_HEADER_SIZE + ETH_DEF_DATA_SIZE)
-
#define ETH_MAX_MTU 16384 /* maximum data size */
#ifndef MAX_MACADDR_LEN
#define MAX_MACADDR_LEN 6 /* number of bytes in MAC address */
#endif /* MAX_MACADDR_LEN */
-#define ETH_IS_LOCALLY_ADMINISTERED(address) \
- (((u8 *)(address))[0] & ((u8)0x02))
-#define NIC_VENDOR_ID 0x0008000B
-
/* various types of scsi task mgmt commands */
enum task_mgmt_types {
TASK_MGMT_ABORT_TASK = 1,
VDISK_MGMT_RELEASE,
};
-/* this is used in the vdest field */
-#define VDEST_ALL 0xFFFF
-
-#define MIN_NUMSIGNALS 64
-#define MAX_NUMSIGNALS 4096
-
-/* MAX_NET_RCV_BUF specifies the number of rcv buffers that are created by each
-* guest's virtnic and posted to uisnic. Uisnic, for each channel, keeps the rcv
-* buffers posted and uses them to receive data on behalf of the guest's virtnic.
-* NOTE: the num_rcv_bufs is configurable for each VNIC. So the following is
-* simply an upperlimit on what each VNIC can provide. Setting it to half of the
-* NUMSIGNALS to prevent queue full deadlocks */
-#define MAX_NET_RCV_BUFS (MIN_NUMSIGNALS / 2)
-
/*
* structs with pragma pack */
u8 scsistat; /* the scsi status */
u8 addlstat; /* non-scsi status - covers cases like timeout
* needed by windows guests */
-#define ADDL_RESET 1
-#define ADDL_TIMEOUT 2
-#define ADDL_INTERNAL_ERROR 3
#define ADDL_SEL_TIMEOUT 4
-#define ADDL_CMD_TIMEOUT 5
-#define ADDL_BAD_TARGET 6
-#define ADDL_RETRY 7
/* the following fields are need to determine the result of command */
u8 sensebuf[MAX_SENSE_SIZE]; /* sense info in case cmd failed; */
*connected to this logical unit.
*/
-#define DEV_NOT_PRESENT 0x7f /* old name - compatibility */
#define DEV_NOT_CAPABLE 0x7f /* peripheral qualifier of 0x3 */
/* peripheral type of 0x1f */
/* specifies no device but target present */
/* peripheral type of 0 - disk */
/* specifies device capable, but not present */
-#define DEV_PROC_CAPABLE_NOT_PRESENT 0x23 /* peripheral qualifier of 0x1 */
- /* peripheral type of 3 - processor */
- /* specifies device capable, but not present */
-
#define DEV_HISUPPORT 0x10 /* HiSup = 1; shows support for report luns */
/* must be returned for lun 0. */
u8 sense_key_specific[3];
};
-/* some SCSI ADSENSE codes */
-#ifndef SCSI_ADSENSE_LUN_NOT_READY
-#define SCSI_ADSENSE_LUN_NOT_READY 0x04
-#endif /* */
-#ifndef SCSI_ADSENSE_ILLEGAL_COMMAND
-#define SCSI_ADSENSE_ILLEGAL_COMMAND 0x20
-#endif /* */
-#ifndef SCSI_ADSENSE_ILLEGAL_BLOCK
-#endif /* */
-#ifndef SCSI_ADSENSE_ILLEGAL_BLOCK
-#define SCSI_ADSENSE_ILLEGAL_BLOCK 0x21
-#endif /* */
-#ifndef SCSI_ADSENSE_INVALID_CDB
-#define SCSI_ADSENSE_INVALID_CDB 0x24
-#endif /* */
-#ifndef SCSI_ADSENSE_INVALID_LUN
-#define SCSI_ADSENSE_INVALID_LUN 0x25
-#endif /* */
-#ifndef SCSI_ADWRITE_PROTECT
-#define SCSI_ADWRITE_PROTECT 0x27
-#endif /* */
-#ifndef SCSI_ADSENSE_MEDIUM_CHANGED
-#define SCSI_ADSENSE_MEDIUM_CHANGED 0x28
-#endif /* */
-#ifndef SCSI_ADSENSE_BUS_RESET
-#define SCSI_ADSENSE_BUS_RESET 0x29
-#endif /* */
-#ifndef SCSI_ADSENSE_NO_MEDIA_IN_DEVICE
-#define SCSI_ADSENSE_NO_MEDIA_IN_DEVICE 0x3a
-#endif /* */
-
struct net_pkt_xmt {
int len; /* full length of data in the packet */
int num_frags; /* number of fragments in frags containing data */
struct net_pkt_xmtdone {
u32 xmt_done_result; /* result of NET_XMIT */
-#define XMIT_SUCCESS 0
-#define XMIT_FAILED 1
};
/* RCVPOST_BUF_SIZe must be at most page_size(4096) - cache_line_size (64) The
/* result of taskmgmt command - set by IOPart - values are: */
#define TASK_MGMT_FAILED 0
-#define TASK_MGMT_SUCCESS 1
};
/* The following is used by uissd to send disk add/remove notifications to
/* result of taskmgmt command - set by IOPart - values are: */
#define VDISK_MGMT_FAILED 0
-#define VDISK_MGMT_SUCCESS 1
};
/* keeping cmd & rsp info in one structure for now cmd rsp packet for scsi */
#pragma pack(pop)
/* ///////////// END PRAGMA PACK PUSH 1 /////////////////////////// */
-/* define offsets to members of struct uiscmdrsp */
-#define OFFSET_CMDTYPE offsetof(struct uiscmdrsp, cmdtype)
-#define OFFSET_SCSI offsetof(struct uiscmdrsp, scsi)
-#define OFFSET_NET offsetof(struct uiscmdrsp, net)
-#define OFFSET_SCSITASKMGMT offsetof(struct uiscmdrsp, scsitaskmgmt)
-#define OFFSET_NEXT offsetof(struct uiscmdrsp, next)
-
-/* define offsets to members of struct uiscmdrsp_net */
-#define OFFSET_TYPE offsetof(struct uiscmdrsp_net, type)
-#define OFFSET_BUF offsetof(struct uiscmdrsp_net, buf)
-#define OFFSET_XMT offsetof(struct uiscmdrsp_net, xmt)
-#define OFFSET_XMT_DONE_RESULT offsetof(struct uiscmdrsp_net, xmtdone)
-#define OFFSET_RCVPOST offsetof(struct uiscmdrsp_net, rcvpost)
-#define OFFSET_RCV_DONE_LEN offsetof(struct uiscmdrsp_net, rcv)
-#define OFFSET_ENBDIS offsetof(struct uiscmdrsp_net, enbdis)
-
-/* define offsets to members of struct net_pkt_rcvpost */
-#define OFFSET_TOTALLEN offsetof(struct net_pkt_rcvpost, totallen)
-#define OFFSET_FRAG offsetof(struct net_pkt_rcvpost, frag)
-
/*
* INLINE functions for initializing and accessing I/O data channels
*/
/* Guest and IOPartition. */
#define PI_PAGE_SIZE 0x1000
#define PI_PAGE_MASK 0x0FFF
-#define PI_PAGE_SHIFT 12
/* returns next non-zero index on success or zero on failure (i.e. out of
* room)
projects / platform / kernel / linux-exynos.git / commitdiff