+ 2010-06-13 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Parallel tests generation: improve comments (tiny change).
+ * tests/Makefile.am ($(parallel_tests)): Added useful comment to
+ generated tests.
+
+ Tests defs: truly get rid of `$am_defs_included' (unused variable)
+ * tests/defs.in ($am_defs_included): Remove, its now unused. It
+ should have been removed in a previous changeset, but the removal
+ was done only partially (oversight).
+
+2010-06-12 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Remove a couple of unneeded conditionals from tests.
+ * tests/pr243.test, tests/pr266.test, tests/strip.test: No need
+ for the FOOTEST conditional.
+
+2010-06-12 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Modernize, improve and/or fix various test scripts.
+ * tests/symlink3.test: Deleted, separated into two new, more
+ complete tests ...
+ * tests/forcemiss.test: ... this one ...
+ * tests/forcemiss2.test: ... and this one.
+ * tests/symlink2.test: Enable `errexit' shell flag, make test
+ stricter, and skip it if symlink creation is not supported.
+ * tests/postproc.test: Enable `errexit' shell flag, related
+ changes, and a couple of unrelated cosmetic changes.
+ * tests/recurs.test: Use the `configure.in' stub created by
+ `./defs', rather than writing one from scratch. Make grepping
+ of Automake stderr slighty stricter.
+ * tests/substtarg.test: Likewise.
+ * tests/strip.test: Likewise, and move the call to `set -e'
+ earlier (just after the inclusion of `./defs'). Also, make sure
+ that the script installed by `make install-script' is equal to
+ the original one.
+ * tests/substref.test: Use the `configure.in' stub created by
+ `./defs', rather than writing one from scratch. Move the call
+ to `set -e' earlier (just after the inclusion of `./defs').
+ Avoid to explicitly export CC for configure (that's already done
+ in ./defs). Avoid potential problems with unpredictable make
+ output. Finally, make grepping of Makefile.in stricter.
+ * tests/substre2.test: Ensure verbose printing of the captured
+ make's output, and make its grepping slighty stricter.
+ * tests/cygwin32.test: Enable `errexit' shell flag, and related
+ changes. Also, do not create useless dummy source/data files.
+ * tests/scripts.test: Likewise.
+ * tests/recurs2.test: Likewise. Also, use the `configure.in'
+ stub created by `./defs'.
+ * tests/Makefile.am (TESTS): Updated.
+
+ Modernize, improve and/or fix tests `pluseq*.test.
+ * tests/pluseq5.test: Append to configure.in using cat with an
+ here-doc, not using echo.
+ * tests/pluseq10.test: Make sure that the captured output of
+ `make' command is always displayed. Where possible, use $FGREP
+ instead of grep (this change makes some checks slighty stricter).
+ * tests/pluseq8.test: Enable `errexit' shell flag, with related
+ changes.
+ * tests/pluseq.test: Likewise. Also, do not create useless dummy
+ data files, and use better m4 quoting in generated configure.in.
+ * tests/pluseq2.test: Likewise. Also, append to configure.in
+ using cat with an here-doc, not using echo.
+ * tests/pluseq3.test: Likewise.
+ * tests/pluseq4.test: Likewise.
+ * tests/pluseq6.test: Likewise.
+ * tests/pluseq7.test: Do not create useless dummy source file.
+ * tests/pluseq9.test: Slighty extended w.r.t. the grepping of
+ Automake stderr. Some unrelated cosmetic changes.
+
+2010-06-12 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ cscope.test: ensure verbose printing of captured stderr.
+ * tests/cscope.test: Print captured stderr before failing.
+
+2010-06-12 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Testsuite: ensure verbose printing of captured stderr.
+ * tests/acloca18.test: Print captured stderr before either failing
+ or grepping it. Be sure to send captured stderr to stderr, not to
+ stdout.
+ * tests/ansi3b.test: Likewise.
+ * tests/cond39.test: Likewise.
+ * tests/configure.test: Likewise.
+ * tests/missing3.test: Likewise.
+ * tests/missing6.test: Likewise.
+ * tests/output-order.test: Likewise.
+ * tests/pr300-ltlib.test: Likewise.
+ * tests/python6.test: Likewise.
+ * tests/python7.test: Likewise.
+ * tests/python8.test: Likewise.
+ * tests/python9.test: Likewise.
+ * tests/subobj.test: Likewise.
+ * tests/vars3.test: Likewise.
+ * tests/missing4.test: Likewise, and fix a call to grep not to use
+ the `-c' flag.
+ * tests/ansi3.test: Likewise, and rely on the `configure.in' stub
+ created by `./defs', rather than writing one from scratch.
+
+ Enable `errexit' shell flag in various tests.
+ * tests/backsl.test: Enable the `errexit' shell flag, and
+ related changes.
+ * tests/backsl2.test: Likewise.
+ * tests/block.test: Likewise.
+ * tests/canon2.test: Likewise.
+ * tests/canon4.test: Likewise.
+ * tests/comment2.test: Likewise.
+ * tests/condlib.test: Likewise.
+ * tests/cond15.test: Likewise, and prefer $FGREP over grep.
+ * tests/canon3.test: Likewise. Also, avoid to create an useless
+ dummy source file.
+ * tests/acoutpt2.test: Enable the `errexit' shell flag, and some
+ related changes. Do some cosmetic improvements in the generated
+ `configure.in' file.
+ * tests/cond4.test: Likewise.
+ * tests/cond14.test: Likewise.
+ * tests/condinc.test: Likewise.
+ * tests/cond7.test: Likewise. Also, remove useless setting of
+ AUTOMAKE_OPTIONS to `foreign' in the generated Makefile.am.
+ * tests/ansi.test: Enable the `errexit' shell flag, and related
+ changes. Extended, esp. by running autoconf, ./configure and
+ make, and by looking into the distdir.
+
+2010-06-12 Stefano Lattarini <stefano.lattarini@gmail.com>
+ Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Extend tests/README w.r.t. trailing `:' in test scripts.
+ * tests/README (section "Writing test cases" subsection "Do"):
+ Explain why apparently redundant trailing `:' and `Exit 0' in
+ test scripts can indeed be useful.
+
+2010-06-11 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Improve determination of PATH separator in bootstrap script.
+ * bootstrap: Detemine what the PATH separator is the same way
+ autoconf does.
+
+ Minor improvements in bootstrap script.
+ * bootstrap: Consistently use two-spaces indentation. Cosmetic
+ improvement to comments.
+ ($me): New variable, containing program basename.
+ Prepend it to all error messages.
+
+ Testsuite now works with BSD make in parallel mode.
+ * tests/defs.in: Unset variables __MKLVL__ and MAKE_JOBS_FIFO,
+ which are exported by BSD make when run in parallel mode, and
+ which can confuse make processes spawned by our testsuite.
+ This change fixes a lot of spurious failure when the testsuite
+ is run with BSD make in parallel mode.
+
+2010-06-09 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Modernize, improve and/or fix various test scripts.
+ * tests/sanity.test: Rely on the `configure.in' stub created by
+ `./defs', rather than writing one from scratch.
+ * tests/depend2.test: Likewise. Also, call `set -e' just after
+ the inclusion of `./defs', instead that later in the script.
+ * tests/canon5.test: Avoid a useless `|| Exit 1' after a call to
+ $AUTOMAKE, and improve the positioning of an $ACLOCAL call.
+ * tests/exeext4.test: Use $FGREP instead of grep, where possible.
+ Make auxiliary rules in the generated Makefile more silent.
+ These changes make some checks slighty stricter.
+ * tests/ext2.test: Call `Exit 1' if inclusion of `./defs' fails.
+ * tests/gettext2.test: Place final `:' at the end of the script,
+ rather than in the middle.
+ * tests/exeext.test: Call `set -e' just after the inclusion of
+ `./defs', instead that later in the script.
+ * tests/extra5.test: Likewise.
+ * tests/confdeps.test: Likewise. Also, prefer `mv -f' over
+ plain `mv', just to be sure.
+ * tests/depcomp.test: Enable `errexit' shell flag, with related
+ changes. Also, modernize the generated configure.in.
+ * tests/cond9.test: Likewise. Also, rely on the `configure.in'
+ stub created by `./defs', rather than writing one from scratch.
+ * tests/cond10.test: Likewise.
+ * tests/depcomp2.test: Likewise.
+ * tests/depend3.test: Likewise.
+ * tests/distcom7.test: Likewise.
+ * tests/fortdep.test: Likewise. Also, remove definition of
+ AUTOMAKE_OPTIONS to `foreign' in the generated Makefile.am,
+ since that flag is already provided by $AUTOMAKE.
+ * tests/mdate.test: Made stricter, by checking that Automake
+ actually failed, and by making a stricter grep on the error
+ message. Also, set shell `errexit flag'.
+ * tests/python2.test: Improved verbose messages.
+
+ Make test `ammissing.test' stricter.
+ * tests/ammissing.test: Fail if $ACLOCAL succeds unexpectedly.
+ Enable `errexit' shell flag.
+
2010-06-08 Stefano Lattarini <stefano.lattarini@gmail.com>
Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
projects / platform / upstream / automake.git / commitdiff