u8 state;
u8 presence_save;
u8 pwr_save;
- struct timer_list task_event;
- u8 hp_slot;
struct controller *ctrl;
struct hpc_ops *hpc_ops;
struct hotplug_slot *hotplug_slot;
struct list_head slot_list;
- char name[SLOT_NAME_SIZE];
struct delayed_work work; /* work for button event */
struct mutex lock;
+ u8 hp_slot;
};
struct event_info {
extern void shpchp_queue_pushbutton_work(struct work_struct *work);
extern int shpc_init( struct controller *ctrl, struct pci_dev *pdev);
+static inline const char *slot_name(struct slot *slot)
+{
+ return hotplug_slot_name(slot->hotplug_slot);
+}
+
#ifdef CONFIG_ACPI
#include <linux/pci-acpi.h>
static inline int get_hp_params_from_firmware(struct pci_dev *dev,
{
struct slot *slot = hotplug_slot->private;
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
kfree(slot->hotplug_slot->info);
kfree(slot->hotplug_slot);
struct slot *slot;
struct hotplug_slot *hotplug_slot;
struct hotplug_slot_info *info;
+ char name[SLOT_NAME_SIZE];
int retval = -ENOMEM;
int i;
goto error_hpslot;
hotplug_slot->info = info;
- hotplug_slot->name = slot->name;
-
slot->hp_slot = i;
slot->ctrl = ctrl;
slot->bus = ctrl->pci_dev->subordinate->number;
/* register this slot with the hotplug pci core */
hotplug_slot->private = slot;
hotplug_slot->release = &release_slot;
- snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
+ snprintf(name, SLOT_NAME_SIZE, "%d", slot->number);
hotplug_slot->ops = &shpchp_hotplug_slot_ops;
- get_power_status(hotplug_slot, &info->power_status);
- get_attention_status(hotplug_slot, &info->attention_status);
- get_latch_status(hotplug_slot, &info->latch_status);
- get_adapter_status(hotplug_slot, &info->adapter_status);
-
dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
"slot_device_offset=%x\n", slot->bus, slot->device,
slot->hp_slot, slot->number, ctrl->slot_device_offset);
retval = pci_hp_register(slot->hotplug_slot,
- ctrl->pci_dev->subordinate, slot->device,
- hotplug_slot->name);
+ ctrl->pci_dev->subordinate, slot->device, name);
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
goto error_info;
}
+ get_power_status(hotplug_slot, &info->power_status);
+ get_attention_status(hotplug_slot, &info->attention_status);
+ get_latch_status(hotplug_slot, &info->latch_status);
+ get_adapter_status(hotplug_slot, &info->adapter_status);
+
list_add(&slot->slot_list, &ctrl->slot_list);
}
{
struct slot *slot = get_slot(hotplug_slot);
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
hotplug_slot->info->attention_status = status;
slot->hpc_ops->set_attention_status(slot, status);
{
struct slot *slot = get_slot(hotplug_slot);
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
return shpchp_sysfs_enable_slot(slot);
}
{
struct slot *slot = get_slot(hotplug_slot);
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
return shpchp_sysfs_disable_slot(slot);
}
struct slot *slot = get_slot(hotplug_slot);
int retval;
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
retval = slot->hpc_ops->get_power_status(slot, value);
if (retval < 0)
struct slot *slot = get_slot(hotplug_slot);
int retval;
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
retval = slot->hpc_ops->get_attention_status(slot, value);
if (retval < 0)
struct slot *slot = get_slot(hotplug_slot);
int retval;
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
retval = slot->hpc_ops->get_latch_status(slot, value);
if (retval < 0)
struct slot *slot = get_slot(hotplug_slot);
int retval;
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
retval = slot->hpc_ops->get_adapter_status(slot, value);
if (retval < 0)
struct slot *slot = get_slot(hotplug_slot);
int retval;
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
retval = slot->hpc_ops->get_max_bus_speed(slot, value);
if (retval < 0)
struct slot *slot = get_slot(hotplug_slot);
int retval;
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
if (retval < 0)
/*
* Button pressed - See if need to TAKE ACTION!!!
*/
- info("Button pressed on Slot(%s)\n", p_slot->name);
+ info("Button pressed on Slot(%s)\n", slot_name(p_slot));
event_type = INT_BUTTON_PRESS;
queue_interrupt_event(p_slot, event_type);
/*
* Switch opened
*/
- info("Latch open on Slot(%s)\n", p_slot->name);
+ info("Latch open on Slot(%s)\n", slot_name(p_slot));
event_type = INT_SWITCH_OPEN;
if (p_slot->pwr_save && p_slot->presence_save) {
event_type = INT_POWER_FAULT;
/*
* Switch closed
*/
- info("Latch close on Slot(%s)\n", p_slot->name);
+ info("Latch close on Slot(%s)\n", slot_name(p_slot));
event_type = INT_SWITCH_CLOSE;
}
/*
* Card Present
*/
- info("Card present on Slot(%s)\n", p_slot->name);
+ info("Card present on Slot(%s)\n", slot_name(p_slot));
event_type = INT_PRESENCE_ON;
} else {
/*
* Not Present
*/
- info("Card not present on Slot(%s)\n", p_slot->name);
+ info("Card not present on Slot(%s)\n", slot_name(p_slot));
event_type = INT_PRESENCE_OFF;
}
/*
* Power fault Cleared
*/
- info("Power fault cleared on Slot(%s)\n", p_slot->name);
+ info("Power fault cleared on Slot(%s)\n", slot_name(p_slot));
p_slot->status = 0x00;
event_type = INT_POWER_FAULT_CLEAR;
} else {
/*
* Power fault
*/
- info("Power fault on Slot(%s)\n", p_slot->name);
+ info("Power fault on Slot(%s)\n", slot_name(p_slot));
event_type = INT_POWER_FAULT;
/* set power fault status for this board */
p_slot->status = 0xFF;
if (getstatus) {
p_slot->state = BLINKINGOFF_STATE;
info("PCI slot #%s - powering off due to button "
- "press.\n", p_slot->name);
+ "press.\n", slot_name(p_slot));
} else {
p_slot->state = BLINKINGON_STATE;
info("PCI slot #%s - powering on due to button "
- "press.\n", p_slot->name);
+ "press.\n", slot_name(p_slot));
}
/* blink green LED and turn off amber */
p_slot->hpc_ops->green_led_blink(p_slot);
* press the attention again before the 5 sec. limit
* expires to cancel hot-add or hot-remove
*/
- info("Button cancel on Slot(%s)\n", p_slot->name);
+ info("Button cancel on Slot(%s)\n", slot_name(p_slot));
dbg("%s: button cancel\n", __func__);
cancel_delayed_work(&p_slot->work);
if (p_slot->state == BLINKINGOFF_STATE)
p_slot->hpc_ops->green_led_off(p_slot);
p_slot->hpc_ops->set_attention_status(p_slot, 0);
info("PCI slot #%s - action canceled due to button press\n",
- p_slot->name);
+ slot_name(p_slot));
p_slot->state = STATIC_STATE;
break;
case POWEROFF_STATE:
* this means that the previous attention button action
* to hot-add or hot-remove is undergoing
*/
- info("Button ignore on Slot(%s)\n", p_slot->name);
+ info("Button ignore on Slot(%s)\n", slot_name(p_slot));
update_slot_info(p_slot);
break;
default:
mutex_lock(&p_slot->ctrl->crit_sect);
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (rc || !getstatus) {
- info("No adapter on slot(%s)\n", p_slot->name);
+ info("No adapter on slot(%s)\n", slot_name(p_slot));
goto out;
}
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
- info("Latch open on slot(%s)\n", p_slot->name);
+ info("Latch open on slot(%s)\n", slot_name(p_slot));
goto out;
}
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
- info("Already enabled on slot(%s)\n", p_slot->name);
+ info("Already enabled on slot(%s)\n", slot_name(p_slot));
goto out;
}
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (rc || !getstatus) {
- info("No adapter on slot(%s)\n", p_slot->name);
+ info("No adapter on slot(%s)\n", slot_name(p_slot));
goto out;
}
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
- info("Latch open on slot(%s)\n", p_slot->name);
+ info("Latch open on slot(%s)\n", slot_name(p_slot));
goto out;
}
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || !getstatus) {
- info("Already disabled slot(%s)\n", p_slot->name);
+ info("Already disabled slot(%s)\n", slot_name(p_slot));
goto out;
}
break;
case POWERON_STATE:
info("Slot %s is already in powering on state\n",
- p_slot->name);
+ slot_name(p_slot));
break;
case BLINKINGOFF_STATE:
case POWEROFF_STATE:
- info("Already enabled on slot %s\n", p_slot->name);
+ info("Already enabled on slot %s\n", slot_name(p_slot));
break;
default:
- err("Not a valid state on slot %s\n", p_slot->name);
+ err("Not a valid state on slot %s\n", slot_name(p_slot));
break;
}
mutex_unlock(&p_slot->lock);
break;
case POWEROFF_STATE:
info("Slot %s is already in powering off state\n",
- p_slot->name);
+ slot_name(p_slot));
break;
case BLINKINGON_STATE:
case POWERON_STATE:
- info("Already disabled on slot %s\n", p_slot->name);
+ info("Already disabled on slot %s\n", slot_name(p_slot));
break;
default:
- err("Not a valid state on slot %s\n", p_slot->name);
+ err("Not a valid state on slot %s\n", slot_name(p_slot));
break;
}
mutex_unlock(&p_slot->lock);