--- /dev/null
+/*
+ * LCD driver for MIPI DBI-C / DCS compatible LCDs
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/spi/spi.h>
+
+#include <mach/omapfb.h>
+#include <mach/lcd_mipid.h>
+
+#define MIPID_MODULE_NAME "lcd_mipid"
+
+#define MIPID_CMD_READ_DISP_ID 0x04
+#define MIPID_CMD_READ_RED 0x06
+#define MIPID_CMD_READ_GREEN 0x07
+#define MIPID_CMD_READ_BLUE 0x08
+#define MIPID_CMD_READ_DISP_STATUS 0x09
+#define MIPID_CMD_RDDSDR 0x0F
+#define MIPID_CMD_SLEEP_IN 0x10
+#define MIPID_CMD_SLEEP_OUT 0x11
+#define MIPID_CMD_DISP_OFF 0x28
+#define MIPID_CMD_DISP_ON 0x29
+
+#define MIPID_ESD_CHECK_PERIOD msecs_to_jiffies(5000)
+
+#define to_mipid_device(p) container_of(p, struct mipid_device, \
+ panel)
+struct mipid_device {
+ int enabled;
+ int revision;
+ unsigned int saved_bklight_level;
+ unsigned long hw_guard_end; /* next value of jiffies
+ when we can issue the
+ next sleep in/out command */
+ unsigned long hw_guard_wait; /* max guard time in jiffies */
+
+ struct omapfb_device *fbdev;
+ struct spi_device *spi;
+ struct mutex mutex;
+ struct lcd_panel panel;
+
+ struct workqueue_struct *esd_wq;
+ struct delayed_work esd_work;
+ void (*esd_check)(struct mipid_device *m);
+};
+
+static void mipid_transfer(struct mipid_device *md, int cmd, const u8 *wbuf,
+ int wlen, u8 *rbuf, int rlen)
+{
+ struct spi_message m;
+ struct spi_transfer *x, xfer[4];
+ u16 w;
+ int r;
+
+ BUG_ON(md->spi == NULL);
+
+ spi_message_init(&m);
+
+ memset(xfer, 0, sizeof(xfer));
+ x = &xfer[0];
+
+ cmd &= 0xff;
+ x->tx_buf = &cmd;
+ x->bits_per_word = 9;
+ x->len = 2;
+ spi_message_add_tail(x, &m);
+
+ if (wlen) {
+ x++;
+ x->tx_buf = wbuf;
+ x->len = wlen;
+ x->bits_per_word = 9;
+ spi_message_add_tail(x, &m);
+ }
+
+ if (rlen) {
+ x++;
+ x->rx_buf = &w;
+ x->len = 1;
+ spi_message_add_tail(x, &m);
+
+ if (rlen > 1) {
+ /* Arrange for the extra clock before the first
+ * data bit.
+ */
+ x->bits_per_word = 9;
+ x->len = 2;
+
+ x++;
+ x->rx_buf = &rbuf[1];
+ x->len = rlen - 1;
+ spi_message_add_tail(x, &m);
+ }
+ }
+
+ r = spi_sync(md->spi, &m);
+ if (r < 0)
+ dev_dbg(&md->spi->dev, "spi_sync %d\n", r);
+
+ if (rlen)
+ rbuf[0] = w & 0xff;
+}
+
+static inline void mipid_cmd(struct mipid_device *md, int cmd)
+{
+ mipid_transfer(md, cmd, NULL, 0, NULL, 0);
+}
+
+static inline void mipid_write(struct mipid_device *md,
+ int reg, const u8 *buf, int len)
+{
+ mipid_transfer(md, reg, buf, len, NULL, 0);
+}
+
+static inline void mipid_read(struct mipid_device *md,
+ int reg, u8 *buf, int len)
+{
+ mipid_transfer(md, reg, NULL, 0, buf, len);
+}
+
+static void set_data_lines(struct mipid_device *md, int data_lines)
+{
+ u16 par;
+
+ switch (data_lines) {
+ case 16:
+ par = 0x150;
+ break;
+ case 18:
+ par = 0x160;
+ break;
+ case 24:
+ par = 0x170;
+ break;
+ }
+ mipid_write(md, 0x3a, (u8 *)&par, 2);
+}
+
+static void send_init_string(struct mipid_device *md)
+{
+ u16 initpar[] = { 0x0102, 0x0100, 0x0100 };
+
+ mipid_write(md, 0xc2, (u8 *)initpar, sizeof(initpar));
+ set_data_lines(md, md->panel.data_lines);
+}
+
+static void hw_guard_start(struct mipid_device *md, int guard_msec)
+{
+ md->hw_guard_wait = msecs_to_jiffies(guard_msec);
+ md->hw_guard_end = jiffies + md->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct mipid_device *md)
+{
+ unsigned long wait = md->hw_guard_end - jiffies;
+
+ if ((long)wait > 0 && wait <= md->hw_guard_wait) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(wait);
+ }
+}
+
+static void set_sleep_mode(struct mipid_device *md, int on)
+{
+ int cmd, sleep_time = 50;
+
+ if (on)
+ cmd = MIPID_CMD_SLEEP_IN;
+ else
+ cmd = MIPID_CMD_SLEEP_OUT;
+ hw_guard_wait(md);
+ mipid_cmd(md, cmd);
+ hw_guard_start(md, 120);
+ /*
+ * When we enable the panel, it seems we _have_ to sleep
+ * 120 ms before sending the init string. When disabling the
+ * panel we'll sleep for the duration of 2 frames, so that the
+ * controller can still provide the PCLK,HS,VS signals.
+ */
+ if (!on)
+ sleep_time = 120;
+ msleep(sleep_time);
+}
+
+static void set_display_state(struct mipid_device *md, int enabled)
+{
+ int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
+
+ mipid_cmd(md, cmd);
+}
+
+static int mipid_set_bklight_level(struct lcd_panel *panel, unsigned int level)
+{
+ struct mipid_device *md = to_mipid_device(panel);
+ struct mipid_platform_data *pd = md->spi->dev.platform_data;
+
+ if (pd->get_bklight_max == NULL || pd->set_bklight_level == NULL)
+ return -ENODEV;
+ if (level > pd->get_bklight_max(pd))
+ return -EINVAL;
+ if (!md->enabled) {
+ md->saved_bklight_level = level;
+ return 0;
+ }
+ pd->set_bklight_level(pd, level);
+
+ return 0;
+}
+
+static unsigned int mipid_get_bklight_level(struct lcd_panel *panel)
+{
+ struct mipid_device *md = to_mipid_device(panel);
+ struct mipid_platform_data *pd = md->spi->dev.platform_data;
+
+ if (pd->get_bklight_level == NULL)
+ return -ENODEV;
+ return pd->get_bklight_level(pd);
+}
+
+static unsigned int mipid_get_bklight_max(struct lcd_panel *panel)
+{
+ struct mipid_device *md = to_mipid_device(panel);
+ struct mipid_platform_data *pd = md->spi->dev.platform_data;
+
+ if (pd->get_bklight_max == NULL)
+ return -ENODEV;
+
+ return pd->get_bklight_max(pd);
+}
+
+static unsigned long mipid_get_caps(struct lcd_panel *panel)
+{
+ return OMAPFB_CAPS_SET_BACKLIGHT;
+}
+
+static u16 read_first_pixel(struct mipid_device *md)
+{
+ u16 pixel;
+ u8 red, green, blue;
+
+ mutex_lock(&md->mutex);
+ mipid_read(md, MIPID_CMD_READ_RED, &red, 1);
+ mipid_read(md, MIPID_CMD_READ_GREEN, &green, 1);
+ mipid_read(md, MIPID_CMD_READ_BLUE, &blue, 1);
+ mutex_unlock(&md->mutex);
+
+ switch (md->panel.data_lines) {
+ case 16:
+ pixel = ((red >> 1) << 11) | (green << 5) | (blue >> 1);
+ break;
+ case 24:
+ /* 24 bit -> 16 bit */
+ pixel = ((red >> 3) << 11) | ((green >> 2) << 5) |
+ (blue >> 3);
+ break;
+ default:
+ pixel = 0;
+ BUG();
+ }
+
+ return pixel;
+}
+
+static int mipid_run_test(struct lcd_panel *panel, int test_num)
+{
+ struct mipid_device *md = to_mipid_device(panel);
+ static const u16 test_values[4] = {
+ 0x0000, 0xffff, 0xaaaa, 0x5555,
+ };
+ int i;
+
+ if (test_num != MIPID_TEST_RGB_LINES)
+ return MIPID_TEST_INVALID;
+
+ for (i = 0; i < ARRAY_SIZE(test_values); i++) {
+ int delay;
+ unsigned long tmo;
+
+ omapfb_write_first_pixel(md->fbdev, test_values[i]);
+ tmo = jiffies + msecs_to_jiffies(100);
+ delay = 25;
+ while (1) {
+ u16 pixel;
+
+ msleep(delay);
+ pixel = read_first_pixel(md);
+ if (pixel == test_values[i])
+ break;
+ if (time_after(jiffies, tmo)) {
+ dev_err(&md->spi->dev,
+ "MIPI LCD RGB I/F test failed: "
+ "expecting %04x, got %04x\n",
+ test_values[i], pixel);
+ return MIPID_TEST_FAILED;
+ }
+ delay = 10;
+ }
+ }
+
+ return 0;
+}
+
+static void ls041y3_esd_recover(struct mipid_device *md)
+{
+ dev_err(&md->spi->dev, "performing LCD ESD recovery\n");
+ set_sleep_mode(md, 1);
+ set_sleep_mode(md, 0);
+}
+
+static void ls041y3_esd_check_mode1(struct mipid_device *md)
+{
+ u8 state1, state2;
+
+ mipid_read(md, MIPID_CMD_RDDSDR, &state1, 1);
+ set_sleep_mode(md, 0);
+ mipid_read(md, MIPID_CMD_RDDSDR, &state2, 1);
+ dev_dbg(&md->spi->dev, "ESD mode 1 state1 %02x state2 %02x\n",
+ state1, state2);
+ /* Each sleep out command will trigger a self diagnostic and flip
+ * Bit6 if the test passes.
+ */
+ if (!((state1 ^ state2) & (1 << 6)))
+ ls041y3_esd_recover(md);
+}
+
+static void ls041y3_esd_check_mode2(struct mipid_device *md)
+{
+ int i;
+ u8 rbuf[2];
+ static const struct {
+ int cmd;
+ int wlen;
+ u16 wbuf[3];
+ } *rd, rd_ctrl[7] = {
+ { 0xb0, 4, { 0x0101, 0x01fe, } },
+ { 0xb1, 4, { 0x01de, 0x0121, } },
+ { 0xc2, 4, { 0x0100, 0x0100, } },
+ { 0xbd, 2, { 0x0100, } },
+ { 0xc2, 4, { 0x01fc, 0x0103, } },
+ { 0xb4, 0, },
+ { 0x00, 0, },
+ };
+
+ rd = rd_ctrl;
+ for (i = 0; i < 3; i++, rd++)
+ mipid_write(md, rd->cmd, (u8 *)rd->wbuf, rd->wlen);
+
+ udelay(10);
+ mipid_read(md, rd->cmd, rbuf, 2);
+ rd++;
+
+ for (i = 0; i < 3; i++, rd++) {
+ udelay(10);
+ mipid_write(md, rd->cmd, (u8 *)rd->wbuf, rd->wlen);
+ }
+
+ dev_dbg(&md->spi->dev, "ESD mode 2 state %02x\n", rbuf[1]);
+ if (rbuf[1] == 0x00)
+ ls041y3_esd_recover(md);
+}
+
+static void ls041y3_esd_check(struct mipid_device *md)
+{
+ ls041y3_esd_check_mode1(md);
+ if (md->revision >= 0x88)
+ ls041y3_esd_check_mode2(md);
+}
+
+static void mipid_esd_start_check(struct mipid_device *md)
+{
+ if (md->esd_check != NULL)
+ queue_delayed_work(md->esd_wq, &md->esd_work,
+ MIPID_ESD_CHECK_PERIOD);
+}
+
+static void mipid_esd_stop_check(struct mipid_device *md)
+{
+ if (md->esd_check != NULL)
+ cancel_rearming_delayed_workqueue(md->esd_wq, &md->esd_work);
+}
+
+static void mipid_esd_work(struct work_struct *work)
+{
+ struct mipid_device *md = container_of(work, struct mipid_device,
+ esd_work.work);
+
+ mutex_lock(&md->mutex);
+ md->esd_check(md);
+ mutex_unlock(&md->mutex);
+ mipid_esd_start_check(md);
+}
+
+static int mipid_enable(struct lcd_panel *panel)
+{
+ struct mipid_device *md = to_mipid_device(panel);
+
+ mutex_lock(&md->mutex);
+
+ if (md->enabled) {
+ mutex_unlock(&md->mutex);
+ return 0;
+ }
+ set_sleep_mode(md, 0);
+ md->enabled = 1;
+ send_init_string(md);
+ set_display_state(md, 1);
+ mipid_set_bklight_level(panel, md->saved_bklight_level);
+ mipid_esd_start_check(md);
+
+ mutex_unlock(&md->mutex);
+ return 0;
+}
+
+static void mipid_disable(struct lcd_panel *panel)
+{
+ struct mipid_device *md = to_mipid_device(panel);
+
+ /*
+ * A final ESD work might be called before returning,
+ * so do this without holding the lock.
+ */
+ mipid_esd_stop_check(md);
+ mutex_lock(&md->mutex);
+
+ if (!md->enabled) {
+ mutex_unlock(&md->mutex);
+ return;
+ }
+ md->saved_bklight_level = mipid_get_bklight_level(panel);
+ mipid_set_bklight_level(panel, 0);
+ set_display_state(md, 0);
+ set_sleep_mode(md, 1);
+ md->enabled = 0;
+
+ mutex_unlock(&md->mutex);
+}
+
+static int panel_enabled(struct mipid_device *md)
+{
+ u32 disp_status;
+ int enabled;
+
+ mipid_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4);
+ disp_status = __be32_to_cpu(disp_status);
+ enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
+ dev_dbg(&md->spi->dev,
+ "LCD panel %senabled by bootloader (status 0x%04x)\n",
+ enabled ? "" : "not ", disp_status);
+ return enabled;
+}
+
+static int mipid_init(struct lcd_panel *panel,
+ struct omapfb_device *fbdev)
+{
+ struct mipid_device *md = to_mipid_device(panel);
+
+ md->fbdev = fbdev;
+ md->esd_wq = create_singlethread_workqueue("mipid_esd");
+ if (md->esd_wq == NULL) {
+ dev_err(&md->spi->dev, "can't create ESD workqueue\n");
+ return -ENOMEM;
+ }
+ INIT_DELAYED_WORK(&md->esd_work, mipid_esd_work);
+ mutex_init(&md->mutex);
+
+ md->enabled = panel_enabled(md);
+
+ if (md->enabled)
+ mipid_esd_start_check(md);
+ else
+ md->saved_bklight_level = mipid_get_bklight_level(panel);
+
+ return 0;
+}
+
+static void mipid_cleanup(struct lcd_panel *panel)
+{
+ struct mipid_device *md = to_mipid_device(panel);
+
+ if (md->enabled)
+ mipid_esd_stop_check(md);
+ destroy_workqueue(md->esd_wq);
+}
+
+static struct lcd_panel mipid_panel = {
+ .config = OMAP_LCDC_PANEL_TFT,
+
+ .bpp = 16,
+ .x_res = 800,
+ .y_res = 480,
+ .pixel_clock = 21940,
+ .hsw = 50,
+ .hfp = 20,
+ .hbp = 15,
+ .vsw = 2,
+ .vfp = 1,
+ .vbp = 3,
+
+ .init = mipid_init,
+ .cleanup = mipid_cleanup,
+ .enable = mipid_enable,
+ .disable = mipid_disable,
+ .get_caps = mipid_get_caps,
+ .set_bklight_level = mipid_set_bklight_level,
+ .get_bklight_level = mipid_get_bklight_level,
+ .get_bklight_max = mipid_get_bklight_max,
+ .run_test = mipid_run_test,
+};
+
+static int mipid_detect(struct mipid_device *md)
+{
+ struct mipid_platform_data *pdata;
+ u8 display_id[3];
+
+ pdata = md->spi->dev.platform_data;
+ if (pdata == NULL) {
+ dev_err(&md->spi->dev, "missing platform data\n");
+ return -ENOENT;
+ }
+
+ mipid_read(md, MIPID_CMD_READ_DISP_ID, display_id, 3);
+ dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n",
+ display_id[0], display_id[1], display_id[2]);
+
+ switch (display_id[0]) {
+ case 0x45:
+ md->panel.name = "lph8923";
+ break;
+ case 0x83:
+ md->panel.name = "ls041y3";
+ md->esd_check = ls041y3_esd_check;
+ break;
+ default:
+ md->panel.name = "unknown";
+ dev_err(&md->spi->dev, "invalid display ID\n");
+ return -ENODEV;
+ }
+
+ md->revision = display_id[1];
+ md->panel.data_lines = pdata->data_lines;
+ pr_info("omapfb: %s rev %02x LCD detected, %d data lines\n",
+ md->panel.name, md->revision, md->panel.data_lines);
+
+ return 0;
+}
+
+static int mipid_spi_probe(struct spi_device *spi)
+{
+ struct mipid_device *md;
+ int r;
+
+ md = kzalloc(sizeof(*md), GFP_KERNEL);
+ if (md == NULL) {
+ dev_err(&spi->dev, "out of memory\n");
+ return -ENOMEM;
+ }
+
+ spi->mode = SPI_MODE_0;
+ md->spi = spi;
+ dev_set_drvdata(&spi->dev, md);
+ md->panel = mipid_panel;
+
+ r = mipid_detect(md);
+ if (r < 0)
+ return r;
+
+ omapfb_register_panel(&md->panel);
+
+ return 0;
+}
+
+static int mipid_spi_remove(struct spi_device *spi)
+{
+ struct mipid_device *md = dev_get_drvdata(&spi->dev);
+
+ mipid_disable(&md->panel);
+ kfree(md);
+
+ return 0;
+}
+
+static struct spi_driver mipid_spi_driver = {
+ .driver = {
+ .name = MIPID_MODULE_NAME,
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = mipid_spi_probe,
+ .remove = __devexit_p(mipid_spi_remove),
+};
+
+static int mipid_drv_init(void)
+{
+ spi_register_driver(&mipid_spi_driver);
+
+ return 0;
+}
+module_init(mipid_drv_init);
+
+static void mipid_drv_cleanup(void)
+{
+ spi_unregister_driver(&mipid_spi_driver);
+}
+module_exit(mipid_drv_cleanup);
+
+MODULE_DESCRIPTION("MIPI display driver");
+MODULE_LICENSE("GPL");
projects / platform / kernel / linux-rpi.git / commitdiff