#include <linux/delay.h>
#include <linux/dma-mapping.h>
-#include <linux/fsl_devices.h>
#include <linux/gfp.h>
#include <linux/gpio.h>
#include <linux/init.h>
mdelay(1);
}
-static struct fsl_usb2_platform_data usb_pdata = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
#if defined(CONFIG_USB_ULPI)
static struct mxc_usbh_platform_data usbh2_pdata = {
usb_xcvr_reset();
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
moboard_usbh2_init();
switch (mx31moboard_baseboard) {
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
+#include <linux/fsl_devices.h>
#include <linux/usb/otg.h>
return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
}
+
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
devboard_init_sel_gpios();
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
devboard_usbh1_init();
}
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/types.h>
+#include <linux/fsl_devices.h>
#include <linux/usb/otg.h>
return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
}
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
marxbot_usbh1_init();
}
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/types.h>
+#include <linux/fsl_devices.h>
#include <mach/common.h>
#include <mach/hardware.h>
return 0;
}
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
smartbot_resets_init();
smartbot_cam_init();