vlan: adds vlan_dev_select_queue

This is required to correctly select vlan tx queue for a driver
supporting multi tx queue with ndo_select_queue implemented since
currently selected vlan tx queue is unaligned to selected queue by
real net_devce ndo_select_queue.

Unaligned vlan tx queue selection causes thrash with higher vlan
tx lock contention for least fcoe traffic and wrong socket tx
queue_mapping for ixgbe having ndo_select_queue implemented.

-v2

As per Eric Dumazet<eric.dumazet@gmail.com> comments, mirrored
vlan net_device_ops to have them with and without vlan_dev_select_queue
and then select according to real dev ndo_select_queue present or not
for a vlan net_device. This is to completely skip vlan_dev_select_queue
calling for real net_device not supporting ndo_select_queue.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 9e83272..2fd057c 100644 (file)
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -361,6 +361,14 @@ static netdev_tx_t vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb,
        return ret;
 }
 
+static u16 vlan_dev_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+       struct net_device *rdev = vlan_dev_info(dev)->real_dev;
+       const struct net_device_ops *ops = rdev->netdev_ops;
+
+       return ops->ndo_select_queue(rdev, skb);
+}
+
 static int vlan_dev_change_mtu(struct net_device *dev, int new_mtu)
 {
        /* TODO: gotta make sure the underlying layer can handle it,
@@ -688,7 +696,8 @@ static const struct header_ops vlan_header_ops = {
        .parse   = eth_header_parse,
 };
 
-static const struct net_device_ops vlan_netdev_ops, vlan_netdev_accel_ops;
+static const struct net_device_ops vlan_netdev_ops, vlan_netdev_accel_ops,
+                   vlan_netdev_ops_sq, vlan_netdev_accel_ops_sq;
 
 static int vlan_dev_init(struct net_device *dev)
 {
@@ -722,11 +731,17 @@ static int vlan_dev_init(struct net_device *dev)
        if (real_dev->features & NETIF_F_HW_VLAN_TX) {
                dev->header_ops      = real_dev->header_ops;
                dev->hard_header_len = real_dev->hard_header_len;
-               dev->netdev_ops         = &vlan_netdev_accel_ops;
+               if (real_dev->netdev_ops->ndo_select_queue)
+                       dev->netdev_ops = &vlan_netdev_accel_ops_sq;
+               else
+                       dev->netdev_ops = &vlan_netdev_accel_ops;
        } else {
                dev->header_ops      = &vlan_header_ops;
                dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
-               dev->netdev_ops         = &vlan_netdev_ops;
+               if (real_dev->netdev_ops->ndo_select_queue)
+                       dev->netdev_ops = &vlan_netdev_ops_sq;
+               else
+                       dev->netdev_ops = &vlan_netdev_ops;
        }
 
        if (is_vlan_dev(real_dev))
@@ -865,6 +880,56 @@ static const struct net_device_ops vlan_netdev_accel_ops = {
 #endif
 };
 
+static const struct net_device_ops vlan_netdev_ops_sq = {
+       .ndo_select_queue       = vlan_dev_select_queue,
+       .ndo_change_mtu         = vlan_dev_change_mtu,
+       .ndo_init               = vlan_dev_init,
+       .ndo_uninit             = vlan_dev_uninit,
+       .ndo_open               = vlan_dev_open,
+       .ndo_stop               = vlan_dev_stop,
+       .ndo_start_xmit =  vlan_dev_hard_start_xmit,
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_set_mac_address    = vlan_dev_set_mac_address,
+       .ndo_set_rx_mode        = vlan_dev_set_rx_mode,
+       .ndo_set_multicast_list = vlan_dev_set_rx_mode,
+       .ndo_change_rx_flags    = vlan_dev_change_rx_flags,
+       .ndo_do_ioctl           = vlan_dev_ioctl,
+       .ndo_neigh_setup        = vlan_dev_neigh_setup,
+       .ndo_get_stats          = vlan_dev_get_stats,
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+       .ndo_fcoe_ddp_setup     = vlan_dev_fcoe_ddp_setup,
+       .ndo_fcoe_ddp_done      = vlan_dev_fcoe_ddp_done,
+       .ndo_fcoe_enable        = vlan_dev_fcoe_enable,
+       .ndo_fcoe_disable       = vlan_dev_fcoe_disable,
+       .ndo_fcoe_get_wwn       = vlan_dev_fcoe_get_wwn,
+#endif
+};
+
+static const struct net_device_ops vlan_netdev_accel_ops_sq = {
+       .ndo_select_queue       = vlan_dev_select_queue,
+       .ndo_change_mtu         = vlan_dev_change_mtu,
+       .ndo_init               = vlan_dev_init,
+       .ndo_uninit             = vlan_dev_uninit,
+       .ndo_open               = vlan_dev_open,
+       .ndo_stop               = vlan_dev_stop,
+       .ndo_start_xmit =  vlan_dev_hwaccel_hard_start_xmit,
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_set_mac_address    = vlan_dev_set_mac_address,
+       .ndo_set_rx_mode        = vlan_dev_set_rx_mode,
+       .ndo_set_multicast_list = vlan_dev_set_rx_mode,
+       .ndo_change_rx_flags    = vlan_dev_change_rx_flags,
+       .ndo_do_ioctl           = vlan_dev_ioctl,
+       .ndo_neigh_setup        = vlan_dev_neigh_setup,
+       .ndo_get_stats          = vlan_dev_get_stats,
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+       .ndo_fcoe_ddp_setup     = vlan_dev_fcoe_ddp_setup,
+       .ndo_fcoe_ddp_done      = vlan_dev_fcoe_ddp_done,
+       .ndo_fcoe_enable        = vlan_dev_fcoe_enable,
+       .ndo_fcoe_disable       = vlan_dev_fcoe_disable,
+       .ndo_fcoe_get_wwn       = vlan_dev_fcoe_get_wwn,
+#endif
+};
+
 void vlan_setup(struct net_device *dev)
 {
        ether_setup(dev);