spl: Rename Kconfig SPL_LEGACY_IMAGE_SUPPORT to SPL_LEGACY_IMAGE_FORMAT

This matches what this support is called in the non-SPL case. The postfix
_SUPPORT is redundant as enabling Kconfig options implies support.
With this we can use CONFIG_IS_ENABLED() as needed.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 84f2847..43485af 100644 (file)
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -225,7 +225,7 @@ config SPL_RAW_IMAGE_SUPPORT
          is y. If this is not set, SPL will move on to other available
          boot media to find a suitable image.
 
-config SPL_LEGACY_IMAGE_SUPPORT
+config SPL_LEGACY_IMAGE_FORMAT
        bool "Support SPL loading and booting of Legacy images"
        default y if !TI_SECURE_DEVICE && !SPL_LOAD_FIT
        help
@@ -235,7 +235,7 @@ config SPL_LEGACY_IMAGE_SUPPORT
 
 config SPL_LEGACY_IMAGE_CRC_CHECK
        bool "Check CRC of Legacy images"
-       depends on SPL_LEGACY_IMAGE_SUPPORT
+       depends on SPL_LEGACY_IMAGE_FORMAT
        select SPL_CRC32
        help
          Enable this to check the CRC of Legacy images. While this increases
@@ -451,7 +451,7 @@ config SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
 
 config SPL_CRC32
        bool "Support CRC32"
-       default y if SPL_LEGACY_IMAGE_SUPPORT || SPL_EFI_PARTITION
+       default y if SPL_LEGACY_IMAGE_FORMAT || SPL_EFI_PARTITION
        default y if SPL_ENV_SUPPORT || TPL_BLOBLIST
        help
          Enable this to support CRC32 in uImages or FIT images within SPL.

diff --git a/common/spl/Makefile b/common/spl/Makefile
index e71e7be..13db3df 100644 (file)
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -10,7 +10,7 @@ ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o
 obj-$(CONFIG_$(SPL_TPL_)BOOTROM_SUPPORT) += spl_bootrom.o
 obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += spl_fit.o
-obj-$(CONFIG_$(SPL_TPL_)LEGACY_IMAGE_SUPPORT) += spl_legacy.o
+obj-$(CONFIG_$(SPL_TPL_)LEGACY_IMAGE_FORMAT) += spl_legacy.o
 obj-$(CONFIG_$(SPL_TPL_)NOR_SUPPORT) += spl_nor.o
 obj-$(CONFIG_$(SPL_TPL_)XIP_SUPPORT) += spl_xip.o
 obj-$(CONFIG_$(SPL_TPL_)YMODEM_SUPPORT) += spl_ymodem.o

diff --git a/common/spl/spl_nor.c b/common/spl/spl_nor.c
index 0f4fff8..067a2d4 100644 (file)
--- a/common/spl/spl_nor.c
+++ b/common/spl/spl_nor.c
@@ -110,7 +110,7 @@ static int spl_nor_load_image(struct spl_image_info *spl_image,
        }
 
        /* Legacy image handling */
-       if (IS_ENABLED(CONFIG_SPL_LEGACY_IMAGE_SUPPORT)) {
+       if (IS_ENABLED(CONFIG_SPL_LEGACY_IMAGE_FORMAT)) {
                load.bl_len = 1;
                load.read = spl_nor_load_read;
                return spl_load_legacy_img(spl_image, bootdev, &load,

diff --git a/configs/axm_defconfig b/configs/axm_defconfig
index 457bf76..89b9f9f 100644 (file)
--- a/configs/axm_defconfig
+++ b/configs/axm_defconfig
@@ -35,7 +35,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="run flash_self"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
-# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
+# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_CRC32=y
 CONFIG_SPL_NAND_SUPPORT=y

diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig
index afc8c43..edceb18 100644 (file)
--- a/configs/imx8mm_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mm_data_modul_edm_sbc_defconfig
@@ -42,7 +42,7 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
 CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_LATE_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
+CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
 CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

diff --git a/configs/imx8mn_evk_defconfig b/configs/imx8mn_evk_defconfig
index 22fad70..c18c19f 100644 (file)
--- a/configs/imx8mn_evk_defconfig
+++ b/configs/imx8mn_evk_defconfig
@@ -29,7 +29,7 @@ CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
+CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
 CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

diff --git a/configs/kontron-sl-mx6ul_defconfig b/configs/kontron-sl-mx6ul_defconfig
index a59dacf..11e4e95 100644 (file)
--- a/configs/kontron-sl-mx6ul_defconfig
+++ b/configs/kontron-sl-mx6ul_defconfig
@@ -26,7 +26,7 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOARD_TYPES=y
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
+CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
 CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
 CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y

diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig
index 0c7aaa6..053026d 100644 (file)
--- a/configs/mx6sabreauto_defconfig
+++ b/configs/mx6sabreauto_defconfig
@@ -32,7 +32,7 @@ CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};if mmc rescan; then if run loa
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
+CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
 CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C=y

diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
index c8d9ebd..674384c 100644 (file)
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -31,7 +31,7 @@ CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};if mmc rescan; then if run loa
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
+CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
 CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y

diff --git a/configs/openpiton_riscv64_spl_defconfig b/configs/openpiton_riscv64_spl_defconfig
index cbcbe42..8a7e3cc 100644 (file)
--- a/configs/openpiton_riscv64_spl_defconfig
+++ b/configs/openpiton_riscv64_spl_defconfig
@@ -20,7 +20,7 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="fdt addr ${fdtcontroladdr}; fdt move ${fdtcontroladdr} ${fdt_addr_r}; load mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} ${image}; booti ${kernel_addr_r} - ${fdt_addr_r}; "
-# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
+# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_BANNER_PRINT is not set
 CONFIG_SPL_CPU=y

diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
index 7f7aecf..ca3873c 100644 (file)
--- a/configs/stm32mp15_dhcom_basic_defconfig
+++ b/configs/stm32mp15_dhcom_basic_defconfig
@@ -25,7 +25,7 @@ CONFIG_BOOTDELAY=1
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
 CONFIG_CONSOLE_MUX=y
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
+CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
 CONFIG_SPL_ENV_SUPPORT=y

diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig
index 35e43a9..4e70566 100644 (file)
--- a/configs/stm32mp15_dhcor_basic_defconfig
+++ b/configs/stm32mp15_dhcor_basic_defconfig
@@ -23,7 +23,7 @@ CONFIG_BOOTDELAY=1
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
 CONFIG_CONSOLE_MUX=y
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
+CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
 CONFIG_SPL_ENV_SUPPORT=y

diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig
index c24b448..e6bef6c 100644 (file)
--- a/configs/taurus_defconfig
+++ b/configs/taurus_defconfig
@@ -39,7 +39,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
-# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
+# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_CRC32=y
 CONFIG_SPL_NAND_SUPPORT=y