On heavily loaded systems any test server start up can take longer than the

timeout passed to startnew, when this happens startnew completes without being
able to read the pidfile and consequently returns a zero pid2.

To fix the above posibility the server pid is recovered from the verification
stage which will actually return the server pid when verification is valid.

diff --git a/tests/runtests.pl b/tests/runtests.pl
index 25f471a..b9e15f5 100755 (executable)
--- a/tests/runtests.pl
+++ b/tests/runtests.pl
@@ -795,7 +795,6 @@ sub verifyserver {
 sub runhttpserver {
     my ($verbose, $ipv6) = @_;
     my $RUNNING;
-    my $pid;
     my $pidfile = $HTTPPIDFILE;
     my $port = $HTTPPORT;
     my $ip = $HOSTIP;
@@ -815,11 +814,11 @@ sub runhttpserver {
         return (0,0);
     }
 
-    $pid = checkserver($pidfile);
-
+    my $pid = checkserver($pidfile);
     if($pid > 0) {
         stopserver($pid);
     }
+    unlink($pidfile);
 
     my $flag=$debugprotocol?"-v ":"";
     my $dir=$ENV{'srcdir'};
@@ -834,18 +833,21 @@ sub runhttpserver {
     if($httppid <= 0 || !kill(0, $httppid)) {
         # it is NOT alive
         logmsg "RUN: failed to start the HTTP$nameext server\n";
+        stopserver("$pid2");
         $doesntrun{$pidfile} = 1;
         return (0,0);
     }
 
     # Server is up. Verify that we can speak to it.
-    if(!verifyserver("http", $ip, $port)) {
+    my $pid3 = verifyserver("http", $ip, $port);
+    if(!$pid3) {
         logmsg "RUN: HTTP$nameext server failed verification\n";
         # failed to talk to it properly. Kill the server and return failure
         stopserver("$httppid $pid2");
         $doesntrun{$pidfile} = 1;
         return (0,0);
     }
+    $pid2 = $pid3;
 
     if($verbose) {
         logmsg "RUN: HTTP$nameext server is now running PID $httppid\n";
@@ -880,12 +882,12 @@ sub runhttpsserver {
         return (0,0);
     }
 
-    my $pid=checkserver($pidfile);
-
+    my $pid = checkserver($pidfile);
     if($pid > 0) {
         # kill previous stunnel!
         stopserver($pid);
     }
+    unlink($pidfile);
 
     my $flag=$debugprotocol?"-v ":"";
     my $cmd="$perl $srcdir/httpsserver.pl $flag -p https -s \"$stunnel\" -d $srcdir -r $HTTPPORT $HTTPSPORT";
@@ -901,13 +903,15 @@ sub runhttpsserver {
     }
 
     # Server is up. Verify that we can speak to it.
-    if(!verifyserver("https", $ip, $HTTPSPORT)) {
+    my $pid3 = verifyserver("https", $ip, $HTTPSPORT);
+    if(!$pid3) {
         logmsg "RUN: HTTPS server failed verification\n";
         # failed to talk to it properly. Kill the server and return failure
         stopserver("$httpspid $pid2");
         $doesntrun{$pidfile} = 1;
         return (0,0);
     }
+    $pid2 = $pid3;
 
     if($verbose) {
         logmsg "RUN: HTTPS server is now running PID $httpspid\n";
@@ -946,9 +950,10 @@ sub runftpserver {
     }
 
     my $pid = checkserver($pidfile);
-    if($pid >= 0) {
+    if($pid > 0) {
         stopserver($pid);
     }
+    unlink($pidfile);
 
     # start our server:
     my $flag=$debugprotocol?"-v ":"";
@@ -963,27 +968,28 @@ sub runftpserver {
     } else {
         $addr = $HOSTIP;
     }
-    $cmd="$perl $srcdir/ftpserver.pl --pidfile $pidfile $flag --port $port --addr \"$addr\"";
-
-    unlink($pidfile);
 
+    $cmd="$perl $srcdir/ftpserver.pl --pidfile $pidfile $flag --port $port --addr \"$addr\"";
     my ($ftppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
 
     if($ftppid <= 0 || !kill(0, $ftppid)) {
         # it is NOT alive
         logmsg "RUN: failed to start the FTP$id$nameext server\n";
+        stopserver("$pid2");
         $doesntrun{$pidfile} = 1;
         return (0,0);
     }
 
     # Server is up. Verify that we can speak to it.
-    if(!verifyserver("ftp", $ip, $port)) {
+    my $pid3 = verifyserver("ftp", $ip, $port);
+    if(!$pid3) {
         logmsg "RUN: FTP$id$nameext server failed verification\n";
         # failed to talk to it properly. Kill the server and return failure
         stopserver("$ftppid $pid2");
         $doesntrun{$pidfile} = 1;
         return (0,0);
     }
+    $pid2 = $pid3;
 
     if($verbose) {
         logmsg "RUN: FTP$id$nameext server is now running PID $ftppid\n";
@@ -1018,12 +1024,12 @@ sub runftpsserver {
         return (0,0);
     }
 
-    my $pid=checkserver($pidfile);
-
+    my $pid = checkserver($pidfile);
     if($pid > 0) {
         # kill previous stunnel!
         stopserver($pid);
     }
+    unlink($pidfile);
 
     my $flag=$debugprotocol?"-v ":"";
     my $cmd="$perl $srcdir/httpsserver.pl $flag -p ftps -s \"$stunnel\" -d $srcdir -r $FTPPORT $FTPSPORT";
@@ -1039,13 +1045,15 @@ sub runftpsserver {
     }
 
     # Server is up. Verify that we can speak to it.
-    if(!verifyserver("ftps", $ip, $FTPSPORT)) {
+    my $pid3 = verifyserver("ftps", $ip, $FTPSPORT);
+    if(!$pid3) {
         logmsg "RUN: FTPS server failed verification\n";
         # failed to talk to it properly. Kill the server and return failure
         stopserver("$ftpspid $pid2");
         $doesntrun{$pidfile} = 1;
         return (0,0);
     }
+    $pid2 = $pid3;
 
     if($verbose) {
         logmsg "RUN: FTPS server is now running PID $ftpspid\n";
@@ -1084,9 +1092,10 @@ sub runtftpserver {
     }
 
     my $pid = checkserver($pidfile);
-    if($pid >= 0) {
+    if($pid > 0) {
         stopserver($pid);
     }
+    unlink($pidfile);
 
     # start our server:
     my $flag=$debugprotocol?"-v ":"";
@@ -1097,27 +1106,28 @@ sub runtftpserver {
     if($ipv6) {
         $flag .="--ipv6 ";
     }
-    $cmd="./server/tftpd --pidfile $pidfile $flag $port";
-
-    unlink($pidfile);
 
+    $cmd="./server/tftpd --pidfile $pidfile $flag $port";
     my ($tftppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
 
     if($tftppid <= 0 || !kill(0, $tftppid)) {
         # it is NOT alive
         logmsg "RUN: failed to start the TFTP$id$nameext server\n";
+        stopserver("$pid2");
         $doesntrun{$pidfile} = 1;
         return (0,0);
     }
 
     # Server is up. Verify that we can speak to it.
-    if(!verifyserver("tftp", $ip, $port)) {
+    my $pid3 = verifyserver("tftp", $ip, $port);
+    if(!$pid3) {
         logmsg "RUN: TFTP$id$nameext server failed verification\n";
         # failed to talk to it properly. Kill the server and return failure
         stopserver("$tftppid $pid2");
         $doesntrun{$pidfile} = 1;
         return (0,0);
     }
+    $pid2 = $pid3;
 
     if($verbose) {
         logmsg "RUN: TFTP$id$nameext server is now running PID $tftppid\n";
@@ -1318,7 +1328,7 @@ sub runsocksserver {
         $doesntrun{$pidfile} = 1;
         return (0,0);
     }
-    $pid2 = $pid3 if($pid2 <= 0);
+    $pid2 = $pid3;
 
     if($verbose) {
         logmsg "RUN: SOCKS server is now running PID $pid2\n";